BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Fabric neck protection, recommended accessory for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01. Can be used if a fabric neck protector is preferred or if the standard version constantly touches the chest when welding in downward looking position.
Low shoe in black textile composed of high tenacity polyamide. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in EVA/VIBRAM. Sizes: 35-50.
Non-rechargeable battery for Clean Air motor unit for use with the RJS suit.
The PROTAC amplifies all the ambient noise to a level that allows you to hear it better. It allows you to hear better and protects you during those moments when protection is necessary. Ideal for automatically blocking peak noise above 82 dB. Allows you to continue communicating normally. Settings are stored when removed. Automatic shut-down in the event of non-activity for 2 hours.
Dispenser for 1L Deb-Stoko Seven Circles hand disinfection 1L.
Single lightweight and quick to deploy decontamination shower. Fully inflatable, can be set up in a few minutes and will stay standing without continuous inflation, nor mechanical frame. These shelters are lightweight and compact to transport and to store. Version in yellow TPU with gloves on the sides of the shower that allow a second person to help the contaminated person to wash. With sump. Dimensions pack size: 70x45x30cm. Weight: 25kg.No PPE.
Magnetic charging cable of 120 cm with USB-A connection suitable for all lamps equipped with the magnetic charging system.
Low shoe in suede leather/mesh. Provided with an aluminium 200J toe cap and a synthetic antiperforation sole. BreathActive lining. Outsole in PU/TPU. Removable, polyurethane insole with textile layer. Sizes: 39-47.
Hand cleaner with natural abrasive grains of olive kernel flour for removing heavy dirt. Perfumed, skin neutral pH value. Dispenser: 1060646
Fully encapsulating ChemMax 1 suit with HDPE barrier fabric to be worn with the e-breath Powered Air-Purifying Respirator. Version with non-slip soles.
Wet wipes for the hands. For skin-friendly removal of strong and strongly adhering contaminants, paint and varnish. 6 cans of 80 pieces.
Sustainable high-vis stretch jacket made of recycled and bio-based materials. Full 4-way stretch throughout for superior flexibility and freedom of movement and reinforced in exposed areas. Unisex model with large size span.
Temporary horizontal lifeline in 16mm core jacket rope to be used with 2 container anchor posts Conte Post (1061610). Suitable for 1 or 2 users. At each end of the lifeline is 2m of red rope, intended to prevent access to hazardous areas (container ends). Supplied with 2 salen triple action locking musketon hooks and a transport bag. Total length: 14m, minimum length: 5m. Static strength: 18kN, minimum breaking strength: 23kN.
High shoe in waterrepellant full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breat hable, abrasion resistant 3D liner in textile. Outsole in PU/Vibram, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
New Multi charging station for 3 batteries, high capacity, as accessory for motor unit Versaflo TR-300. Without power supply.
Stretch coverall with knee pockets from the Progression collection, enhanced visibility EN17353.
A new designed lightweight safety shoe with PU-coated upper leather. Outstanding ergonomics, padded Memory foam and water repellency means day-long safety and comfort. An oil resistant PU outer sole gives outstanding grip and a ventilated inner sole keeps feet cool. Features JALAS aluminium toe cap, plasma-treated textile puncture protection.
Replacement blade for Secumax 370. High-quality steel and plastic blade head, with a cutting edge on one side and an unsharpened tape scorer on the other. The blade is 58mm long, 25mm wide, and 0.63mm thick.
Unisex hoodie with a zipper and a comfortable fit, hood with drawstring, and 2×1 ribbed cuffs and hem. Made from 80% OCS certified organic cotton and 20% RCS certified recycled polyester.
Ki-Parka 165 with integrated life jacket: • Buoyancy 165N • Tricot mesh; • ID bag; • VHF bag; • Antenna / microphone attachment; • Blade attachment; • Adjustable width; • Crotch strap. Available colors: Fluo yellow. Available sizes: S-3XL. In accordance with: EN ISO 20471 class 2, EN 343 3: 3 and EN ISO 15027-1.
Low shoe S1P in x-dry knit planet textile (from 100% recycled PET bottles) with 200J synthetic toe cap and synthetic antiperforation sole. Breathable lining in 18% bamboo and 52% recycled polyester for optimized climate management. Sole in PU/TPU (i-PUREnrj) made from 10% recycled PU waste: supple and lightweight, oil and petrol resistant, slipresistant. removable, anti-static comfort footbed with surface made from 100% recycled PET bottles, foam from recycled PU production waste and recycled PU. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52. PCF (Product Carbon Footprint) = 7,17kg CO².
Sportive goggle in clear polycarbonate. The uvex i-guard+ with its highly flexible frame ensures the best protection – and adapts in dividually to the widest variety of face shapes. The ergonomically shaped glasses reliably protect against liquids and particles. The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, perman ently fog-free on the inside and easy to clean.
Double Strap Wrist Support for right hand with Open Center Stay™: Supports wrist during repetitive motion discomfort by limiting wrist movements.
Plastic first aid kit box with wall mount, specifically stocked for use in lorries.
Absorbent pillows measuring 25 cm x 25 cm. These heavy-weight cushions are packaged in a box. Packaged per 32 pieces. They do not absorb water, and they float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water- insoluble chemicals. Absorbent pillows for regular leaks in the same place. Absorption capacity: 58 litres.
Face shield Centurion S760: 225 mm gold metallised, In line with EN 166 (1FT93), EN 171 (4-5).
Flame extinguishing trash can, 50 litre, metal. Dimensions: diameter 335 mm, height 625 mm Available in: white, red, grey, black. Su itable for: general industrial use.
Oxygen producing breathing apparatus with closed stainless steel carrying box with carrying belt. For very hazardous circumstances a nd/or places where a lack of oxygen may develop. Stored in a hermetically sealed, stainless steel carry bag with a strap for carryin g it over the shoulder. Works using an oxygen generating KO2 cell that can be replaced once it is used. KO2 cell is activated by fir st exhalation, responds to moisture and CO2 in exhaled air. Very maintenance-friendly, only requires annual test of seal. Working ti me: at least 90 minutes at consumption of 30 l/min. (escape), 300 minutes at consumption of 10 l/min. (rest). Shelf life: ten years. Weight: 4.9 kg.
1 rubber tourniquet 5 cm, 1 aromatic ammonia capsule, 1 pair Lister bandage scissors 14 cm, 6 sterile compresses 7 x 10 cm, 3 steril e triangular Calico bandages, 3 Cambric bandages (light) in cellophane 5 cm x 5 m, 6 Cambric bandages (light) in cellophane 7.5 cm x 5 m, 6 boxes compressed absorbent wadding 20g, 3 Stella Fix skin-coloured 1.25 cm x 5 m, 3 Stella Fix skin-coloured 2.5 cm x 5 m, 3 boxes Stella Plast 6 cm x 1 m, 6 bottles Stellachrome B 20 ml, 30 safety pins in a bag, 1 first aid instruction sheet (official tex t), 1 list of contents and part numbers for the products.
Hazardous electrical voltage. Hazard warning sign in polypropylene. Dimensions: 100mm.
Mobile yellow container for general areas. The chemical and water resistant container protects the content against dirt, moisture an d damage. Content: 150 pads (41 x 51 cm), 6 socks (7.6 x 244 cm), 8 pillows (43 x 48 cm), 2 pairs of gloves, 2 pairs of safety glass es, 6 disposal bags, 1 emergency response handbook. Absorption capacity: 251 litres. The absorption material in the spill kit is of OP quality.
Spill kit for larger calamities. The chemical and water resistant can contains the materials, which makes it ideal for outdoor stora ge. The container can be used to transport used material. Content: 100 pads (41 x 51 cm), 12 socks (7.6 x 122 cm), 8 socks (7.6 x 36 6 cm), 8 pillows (43 x 48 cm), 50 wipes, 1 pair of safety glasses, 1 pair of gloves, 10 disposal bags and 1 emergency response handb ook. Absorption capacity: 279 litres. The absorption material in the spill kit is of UN quality.
Pouring can, stainless steel, 5 litre, with pouring spout for safe distribution of flammable and hazardous liquids. The aeration valve prevents danger of explosion. Fine dosing dispenser spout with lead fuse, closes automatically, can rotate 360°. This can is also equipped with a fire-safe flame arrestor and an ergonomic handle. Dimensions: 165 x 400 mm.
Anti-static absorbent wipes on 38 cm x 46 m sized roll, sheets perforated lengthwise every 23 cm. These heavy-weight double-perforat ed pads on a roll are packaged in a box. Available per roll. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the ab sorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacity: 94 litres.
Absorption spill kit with an absorption capacity of 152 litres. Intended for medium-sized spills. Content: 50 pads (41 x 51 cm), 4 s ocks (7.6 x 366 cm), 8 pillows (43 x 48 cm), 1 pair of safety glasses, nitrile rubber gloves, 5 disposal bags and 1 emergency respon se handbook. The absorption material is of MRO quality. Packaged in a 200-litre chemical and water resistant drum.
Rescue sign - Assembly point during emergencies in self-adhesive polyester. Dimensions: 200X200mm. Not PPE.
Fire fighting sign - Extinguisher hose in self-adhesive polyester. Dimensions: 148X148mm. Not PPE.
Rescue sign - Safety shower in polypropylene. Dimensions: 200X200mm. Not PPE.
Absorption roll, double-perforated every 38 cm, length 76 cm x 46 m. Material: 100% polypropylene. Heavy quality grey padded, with high absorption capacity and low lint. Suitable for almost every industrial application. Very economical in use. Absorption capacity of 189 litres. Weight 13.6 kg.
Air flow indicator Adflo
Mandatory sign - Hand wash mandatory in polyester. Dimensions diameter: 100mm. Not PPE.
Warning sign - You are entering an explosive atmosphere in polypropylene. Side Dimensions: 200mm. Not PPE.
Warning sign - You are entering an explosive atmosphere in self-adhesive polyester. Side Dimensions: 200mm. Not PPE.
Warning sign - Caution Danger in self-adhesive polyester. Side Dimensions: 100mm. Not PPE.
Fire fighting sign - Fire alarm in polypropylene. Dimensions: 315X315mm. Not PPE.
Dust mask, class P2, for harmful dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that themaskalwaysretains its shape, even when worn for extended periods or after folding the mask. The pleated filter technology reducesbreathingresistance to 50%. Reusable. Fitted with non- adjustable, elastic headbands with closure. Packed per piece. NPF: 10. 149:2001.
Measuring tube to be used in combination with hand pump to measure concentration.
Anti-fatigue mat in hardened rubber, anti-slip and equipped with opening, finished on the sides. Dimensions 0.9 x 1.5 m. Colour: black.
Mandatory sign - Eye protection mandatory in Polypropylene. Dimensions diameter: 100mm. Not PPE.
Fire fighting sign - Extinguisher in polypropylene. Dimensions: 100X100mm. Not PPE.
Model pedestal eye/face wash shall include a stainless steel 11" round bowl, antimicrobially treated Axion MSR eye/face wash head to help protect against the growth of mold and mildew on the treated components. Inverted directional laminar flow and integral 3.7 and 1.3gpm flow controls, chrome-plated brass stay-open ball valve equipped with stainless steel ball and stem, and chrome-plated brass in-line 50 x 50 mesh water strainer. Unit shall also include 1-1/4" Schedule 40 hot- dipped galvanized steel pipe and fittings along with powder-coated cast- iron 9" diameter floor flange.
Rescue sign - Safety shower in polypropylene. Dimensions: 148X148mm. Not PPE.
Rescue sign - First Aid in polypropylene. Dimensions: 100X100mm. Not PPE.
Magnetic signage - Under maintenance. Easy to install and remove. Available in various colours! Not PPE.
Machine Safety sign - Please beware of hand injuries in aluminium plate. Side Dimensions: 100mm. Not PPE.
Eye-catching, signal red galvanised 80L bin. Used for cleaning pads, sponges and other waste that is saturated with flammable and/or environmentally harmful liquids. The waste container has a self-closing lid operated by a foot pedal or manually. The bottom edge has ventilation openings to prevent self-ignition caused by heat build-up.
Filters to protect sensors.
Red galvanized safety can with sprout.Contains: 4L.
Red galvanised steel plunger recipient. Contains: 4L.
Standard insole for the EMMA Office line range. Absorbing and drying quickly, antistatic, against odours and moisture, antibacterial . Sizes: 39-48. No PPE.
Plastic spill tray without grid. Capacity: 20 litres. Weight: 2 kg. Dimensions: 595X395X170MM.
A multi-purpose knife for use with paper, sheet material and foamed plastics - cutting height adjustable between 1 and 10 mm. Made of high- grade polycarbonate. For use by right- and lefthanders. Replacement blades: 1023110
