BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Removable extension strap with D-ring for attachment to the dorsal anchor point of Kratos harnesses from the Premium series, and for use only in conjunction with a fall arrest block. This extension allows for easy anchoring on the back.
Fixed anchor point suitable for steel or concrete walls, ceilings, or roofs. Size M10, suitable for one person.
Fixed anchor point suitable for steel or concrete walls, ceilings, or roofs. Size M12, suitable for one person.
Mobile and universal anchor point, for use by 1 person.
With a D-ring at each end. Suitable for use in ATEX Zone 1 and for one user only.
Universal anchor point for one person with a protective sleeve. Suitable for structures with sharp edges.
Anchor point for one person, suitable for horizontal or vertical I-beams with a width of 100 to 340 mm. For use only as a vertical anchor point (overhead). Suitable for use in Atex environments.
Temporary horizontal lifeline with a maximum length of 18m, easy to install. Durable plastic housing with a carrying handle and tension indicator. Built-in shock absorption mechanism to limit impact forces during a fall. Suitable for two people and can be used in Atex Zone 1 environments.
Temporary, portable, and freestanding anchoring system for use on TPO roofing or concrete surfaces. The anchor point is equipped with an energy absorption system. The bottom plates have a rubber anti-slip backing. Consists of 4 cast plates and 12 top plates, each weighing 25 kg (55 lbs), (total weight: 416.5 kg). May only be used with all associated components. Suitable for 1 person.
- Fall arrest device with 10-meter cable and rescue winch - With internal energy absorber - Carabiner with fall indicator - Plastic housing - Suitable for confined spaces - vertical use - Weight: 7.40 kg - Maximum user weight: 140 kg (vertical use) - EN360 - Atex - With adapter 1063982, this can be mounted on tripods 1063976/1062545
Fall arestor 30-meter stainless steel cable, fully sealed housing, suitable for use in extreme weather conditions. With stainless steel musketon with fall indicator, convenient handle. Suitable for vertical use only. Max user weight: 140kg
Adaptation kit to attach fall arrestor kalypso 10m with winch (1063977/1063978) to tripod 1062545/1063976.
Winch for descents or rescue. To be used in combination with tripod MultiSafeWay and EasySafeWay. Stainless steel cable 4,8mm. Best used in combination with suspension harness. To be used in confined spaces.
Work and rescue winch, mountable on Kratos tripods. Suitable for hoisting or lowering materials (min. weight: 60 kg, max. weight: 250 kg - in accordance with the Machinery Directive) and persons wearing a seat harness. In the event of a person being evacuated, they may be hoisted or lowered a maximum of 2 m. Maximum person weight: 135 kg. 6 mm synthetic rope. Suitable for use in Atex environments. Complies with Machinery Directive 2006/42/EC, EN 1496:2017 Class B, EN13157:2004, Atex Directive 2014/34/EU.
Automatic descent and evacuation device for one person. Suitable for rapid rescue operations. Descent speed of approximately 2 m/s regardless of weight (max. user weight: 141 kg). Includes 20m of 9.6 mm kernmantle rope with two carabiners and a handy carrying bag. For use by one person.
Steel carabiner, automatic locking, opening 16mm, weight 160gr, breaking force 25kN.
Stainless steel carabiner with automatic locking, opening 16.5 mm, 210 g, breaking force 23 kN.
Exoskeleton to protect the housing of the fall arrestor Helixon-S, especially during horizontal use. Attaches with 4 included screws.
Exoskeleton to protect the Helixon-S fallarrestor housing, especially during horizontal use. Attaches with 6 included screws.
Lanyard in 11mm thick sharp edge kernmantel rope with aluminum self-locking hooks (1 scaffold hook and 1 small carabiner).
Lanyard made of 11mm thick, sharp-edged kernmantel rope with self-locking aluminum hooks (one scaffold hook and one small carabiner). Maximum user weight: 140kg.
Lanyard, 2 meter length, consisting of elastic strap with integrated shock absorber. Fitted with one aluminium standard carabiner and two aluminium with big opening (60mm) and a fall indicator. Capacity up to 140Kg. Serves as connection between anchor point and harness. Suitable for use with sharp edges.
Lanyard made of 30mm wide polyester webbing with a damper, specially designed to protect operators working at height in environments with potential electrical hazards. Maximum user weight: 100kg.
Double lanyard made of 30mm wide polyester webbing with a damper, specially designed to protect operators working at height in envir onments with potential electrical hazards. Maximum user weight: 100kg.
Kernmantel rope 11mm diameter with aluminum snap hooks, including one scaffold hook. The seams are protected by a strong, transparent protective sleeve that protects the ends and makes the seams visible, making inspection before use easy. For positioning only.
Kernmantel rope with a diameter of 12mm, assembled with a non-removable rope clamp and energy absorber. It features a steel snap hook (manual locking) on one end of the rope and a knot on the other. Suitable for use near sharp edges. The rope stitching is protected by a strong, transparent protective sleeve that also facilitates visual inspection of the seams before each use.
Double lanyard for attaching to the tool loop of a harness on one side and two tools, each weighing up to 5 kg, on the other. Maximum length: 130 cm.
Stretch lanyard for attaching to the tool loop of a harness on one side and a tool weighing up to 5 kg on the other. Max. length: 130 cm
DuPont™ Tyvek® 500 HV TY127S XG. Hooded coverall. Ergonomic-protective design. Respirator fit hood. Elasticated wrists and ankles and waist. Zipper made with Tyvek® material, Tyvek® flap. Fluorescent orange with grey retroreflective bands. Retroreflective bands create a symmetric "X" on the back of the coverall distinguishing rearward and forward orientation of the wearer. Stitched external seams.
Hands-free system, instant and continuous communication Bluetooth compatible- connect to wireless headsets and Bluetooth enabled phones Multi channel use and group settings within channels Unlimited users Easy set up and configuration Up to 11 hour battery use Quick charge in under 4 hours High-definition audio quality Patented noise filter 900 MHz License-Free Frequency 3 Channels of communication royaltie-free frequencies in accordance with European radio regulations (ETSI) weight: 190g dimensions: 70x110x28mm
The configurator-charger recharges Guardian (plus) terminals and batteries. Can charge and configure 4 terminals/batteries at the same time Intuitive touch screen. Includes a power connector that can be used in conjunction with charger. Extensions to connect a larger number of terminals/batteries.
Very high quality microphone. In combination with earplugs, it provides good communication in noisy environments. Weight: 12 g. With foam, wind protection. Compatible with right and left.
Noise-cancelling HEADSET EPI audio with microphone and neckband
VOK-GUARD-EU-KIT-4-BT-NH This kit contains 4 mobile radio terminals Guardian, 1 battery charger (with configurator), 1 small hard case (HAC 404), 1 user guide, power supply and cable
Costs for a hotel stay if the trainer has to travel a long distance for an on-site training.
Neck support size small as a replacement part for Cleanspace Work.
Neck support size medium as a replacement part for Cleanspace Work.
USB-C power adapter 220V/20W
Option for the LOX4 outdoor charging locker (1064583) to equip the charging locker with perforated metal shelves, a heating cable, and an aerosol system. In the event of a significant temperature increase, the heating cable will melt and activate the aerosol. The aerosol can spread throughout the entire locker and cool or extinguish the heated or burning battery. Important: If you require this option, it must be ordered together with the cabinet.
Water-soluble laundry bag suitable for hygienic and fast processing of contaminated laundry. The laundry is placed in the washing machine along with the bag, and during the washing process, the bag dissolves completely after a minimum of 30 minutes at 45°C to 90°C. The striking red color distinguishes it from other laundry bags. Dimensions: 84x66cm, capacity 60L. Available in cartons of 200 bags (8x25). Suitable for use in hospitals, nursing homes, emergency services, asbestos removal, and other areas.
Option for the LOXK1100 battery cabinet (1063272) to equip the cabinet with an aerosol fire suppression system. Upon detection of smoke, the aerosol is immediately activated and dispersed throughout the entire cabinet. The aerosol cools and controls the battery. Note: This aerosol kit is only sold with the cabinet.
Option for the LOXK12 battery locker cabinet (1063274) to equip the cabinet with an aerosol fire suppression system. Upon detection of smoke, the aerosol is immediately activated and dispersed throughout the entire cabinet. The aerosol cools and controls the battery. Note: This aerosol kit is only sold with the cabinet.
High-cut chemical glove. Strong grip. 18-gauge HPPE liner. FOOD approved Sizes: 6-11, length: 350 mm. Compliant with: EN388:2016 4.X.4.3.F, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 EN407: X1XXXX
Looking for a sporty and agile safety shoe? The ultra-light E-BOUNCE S1PS WHITE/LIME lets you move effortlessly. Thanks to the sole that returns energy with every step, you experience a unique "bounce". This allows you to work comfortably, fit and optimally protected all day long. Lightweight and dynamic Energy-returning sole Non-slip sole Sizes 36-40 made on a narrow last
Looking for a sporty and agile safety shoe? The ultra-light E-BOUNCE S1PS BLACK/ORANGE lets you move effortlessly. Thanks to the sole that returns energy with every step, you experience a unique "bounce". This allows you to work comfortably, stay fit and be optimally protected all day long. With the DISC closure, you'll never have to deal with loose laces again and you can quickly put your shoes on and take them off. Lightweight and dynamic DISC closure Energy-returning sole Anti-slip sole Sizes 36-40 made on a narrow last
Atex headlamp suitable for all explosion-proof environments (Zone 0 - EX II 1G Ex ia IIC T4 Ga), with 2 brightness levels (high and low), dust and water resistant IP67, up to 12 hours of autonomy, high impact resistance and tiltable. 3x AAA batteries included. Minimum/maximum operating time: 5 hours/12 hours
High-visibility work jacket with ARC protection (APC1).
High-visibility eco work jacket with ARC protection (APC1). Made from 50% flame-retardant cotton, 30% Tencel Lyocell, 19% recycled polyester, and 1% antistatic.
Multirnom work jacket with arc flash protection, made from 50% FR cotton, 30% Tencel Lyocell, 19% recycled polyester, and 1% antistatic.
Multirnom work trousers with arc flash protection, made from 50% FR cotton, 30% Tencel Lyocell, 19% recycled polyester, and 1% antistatic.
Multirnom ECO work jacket with arc flash protection, made from 50% FR cotton, 30% Tencel Lyocell, 19% recycled polyester, and 1% antistatic.
Hi-Vis Multinorm ECO work trousers with arc flash protection. Made from 50% FR cotton, 30% Tencel Lyocell, 19% recycled polyester, and 1% antistatic.
Work jacket with arc flash protection. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Lightweight work trousers with arc flash protection. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Work jacket with arc flash protection, welding class 2. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Work trousers with arc flash protection, welding class 2. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Inherently flame-retardant Multinorm work jacket, made from 54% modacrylic, 45% Tencel Lyocell, and 1% antistatic.
Inherently flame-retardant Multinorm work trousers, made from 54% modacrylic, 45% Tencel Lyocell, and 1% antistatic.
