BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Multinorm polo Dronten with ARC protection: Lay-flat collar; Closure with hidden buttons under flap; Long sleeves; Cuffs at end of sleeves; Vertical reflective stripe on the sleeve. Quality: Protex® + Lenzing FR + para-aramide + AST; ± 220 g/m². Available sizes: S-5XL. Complies with: IEC 61482-2 : 2018 APC1 - ATPV 5,5 cal/cm², EN ISO 11612 : 2015 / A1 B1 C1 F1, EN 1149-5 : 2018 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
Work jacket Taltiu: - rounded back; - raglan sleeves; - multipocket; - reflective accents. - stretch elements M-Move - Industrial laundry 75°C Quality: 65% recycled polyester, 35% Lyocell cotton, 260 g / m². Color: Gray / black and gray / yellow. Sizes: 42-88 BE.
Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEKHgP3 filter for protection agiainst dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia and its derivates, mercury vapours, dusts, mists and fumes. Suitable for ATEX environments.
For eye protection designed for comfort, performance and compatibility, select the 3M™ SecureFit™ 500 Series. These contemporary safety glasses feature a sporty streamlined lens shape and weigh just 22 g for a sleek, stylish look. 3M’s innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. The adjustable ratchet temples offer even greater customisation by allowing user to adjust the lens for facial features and eyeglass position. These glasses can combine well with other personal protective equipment.
Electric isolated earmuff for helmet X5 with double-cast (TPU/ABS) housing with details in bright colours for a increased visibility. New noise reduction pads for better noise reduction, and 'spacers': an extra seal ring which reduces resonance. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 36dB.
Two-tone polosweatshirt with contrasting tipping. Contrasting neck tape. 2x2 rib with elastane at the bottom hem and at the cuffs. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Oeko-Tex 100 certified. This item is packaged in a compostable polybag. Quality: 50% organic cotton, 50% recycled polyester, 280g/m². Available sizes: XS-5XL. Available colors: Blue/Navy, Navy/Blue, Black/Orange, Black/Red, Black/Grey and Gray/Black.
This flame-retardant lining is fit for the Heflin rain jacket. The lining is made of 100% polyester with zip closure and slitopening to inside pocket of rain jacket. Available colors: navy.
Hi-Vis work jacket. Zipper with press studs. Extended back. Chest pockets with flap. Key ring under the flap of the right breast pocket. Vertical zip pocket. Sleeve pocket. Side pockets. Adjustable waistband and cuffs. Two inner pockets. Quality: 54% cotton / 46% polyester, 260 g/m². Available colours: Fluo yellow/navy and fluorescent orange/navy. Available sizes: XS-4XL. Complies with: EN ISO 20471 class 2.
Women's softshell with zipper, 2 set-in side pockets with zipper, 2 set-in chest pockets with zipper, of which the right breast pocket has a D-ring for badge holder, pen pocket on sleeve, adjustable waist by means of a zipper. drawstring, breathable, windproof and water repellent, sleeves adjustable by means of adjusters velcro, storm flaps, extended back, reflective piping, chin protector. Quality: 92%/8%, 100%, 100% | polyester/elastane, PU membrane, polyester | 3-laminate | 320gr/m². Available sizes: XS-4XL. Available colours: Indigo Blue and Charcoal Gray.
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with RPB PX5 motor unit or on compressed air line. For medium to heavy applications. Respiration, face and head protection in one. Includes: air hose, and FR face seal.
Breathing hood in Tychem 2000 together with a bump cap and breathing hose. To combine with the motorunit PX5 or with compressed air system.
Flame retardant Hi-Vis ladies shirt with extra visibility. Non-Metal. Concealed front closure with plastic press stud closure. Chest pockets with flap. Adjustable cuffs. Available colours: Navy/Fluo Yellow. Available sizes: S-2XL. Compliant: EN ISO 11612 A1+A2 B1 C1 D1 E1 F1, EN 1149-5, EN ISO 11611 Class 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2 CL.1, ARC RATING: 10.5 cal/ cm².
Unisex sweater ESD in accordance with IEC 61340 - 4 - 9:2016.
Synthetic combat glove, with kevlar protection elements on the knuckles and ventilation on the top of the finger. Water resistant, Touch screen on the palm and all fingers. Chrome free. Suitable for public order and police services. Sizes: 7-12. Complies with: EN388:2016 3.1.3.2.X.P, EN407 X.1.X.X.X.X
Equipement carrying and storage bag duffels style bag (300x500mm). Built-in adjustable webbing shoulder strap. Drawstring closure, durable canvas construction, compact and lightweight design.
Jib system to attach on I-beam on the job site, mounting clamps, plates and hardware included with the system. It rotates 180° and locks every 7 ,5°. Installed glide 360° rail with trolley. Offsett: 6,1m. As anchorage point for 1 person. PRICE WITHOUT TRANSPORTATION COST!
Set for performing a personal fit test for dust masks. Set contains test liquid, sprayer and hood. Test person puts on dust mask and hood, then the test liquid is sprayed inside the hood. If the wearer can taste the test liquid, the mask has not been fitted proper ly or the mask does not seal sufficiently for that person. Test can also be performed without hood.
Standard t-shirt made from 100% polyester: - Quick drying and breathable - Featherweight - Neckband - Raglan sleeves - Flatlock seams. Available sizes: XXS-5XL. Available colors: navy, white, fluo yellow, red, orange, light blue, pink.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW ultra Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
- For tools with max weight of 2,3 kg - With 2 carabiners - Line stays staut when reaching, retracts when not in use - With swivel housing connection
The Peltor COMTAC XPI is an active noise reducting ear muff. Has a 2-way radio communication in noisy environments.
Filter holder.
Spare hood for the 3M fittest kit FT10 or FT30. No PPE.
Fully inflatable life raft for 6 people, light and easy to carry. Exceptionally stable, can be used at low tide. Can be quickly inflated. Suitable for rescue on water. Dimensions: 397 x 117 x40 cm. Dimensions when folded: 88x35x30 cm. Weight 20.5 kg.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Width: 2,54cm, lenght: 2,74m Not PPE.
Set of 10 quick spins with coil tether to attach tools.
Lightweight and quick to deploy shelter. Fully inflatable, can be set up in a few minutes and will stay standing without continuous inflation, nor mechanical frame. These shelters are lightweight and compact to transport and to store. Dimensions: 400x400x250cm. Weight: 58kg.No PPE.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Sold per pack of 10. No PPE.
Hygiene set for hearing protector VERISHIELD VS130D/VS130M
Charging cradel with charger for 5 led lenser lamps. No PPE
Low shoe in Safety Knit® textile. Provided with a synthetic 200J toe cap and a synthetic antiperforation sole. TPU-protection elements in the area of the front cap and the heel provide abrasion protection, especially during kneeling work. BreathActive lining. Outsole in Impulse Foam/rubber, resistant to 300°C. Removable, polyurethane insole with textile layer. Sizes: 36-47.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
The new 3M™ PELTOR™ ComTac™ VII headset is designed to allow for dual hearing protection. It can be used in combination with 3M™ PELTOR™ TEP-300 earplugs, or passive earplugs. A new headband design helps to make transition between rail mounted systems and headband easier. It can also help to improve comfort when worn under a ballistic helmet. Natual Interaction Behavoiur (NIB), helps to improve close range face-to-face communication in steady state noise environments.
Utilizing near field magnetic induction, the 3M™ PELTOR™ System Control Unit helps to improve cable management through cord-free connection to the 3M™ PELTOR™ ComTac™ VII Headset, and 3M™ PELTOR™ Tactical Earplugs, TEP-300. There is also a port for an optional wired connection to the 3M™ PELTOR™ ComTac™ VII Headset. The SCU is equipped with three com ports for radios and intercom systems, and is designed to handle multiple radios with multiple channels. The SCU is also available with Bluetooth® technology. The SCU can be remotely operated via a wireless remote control unit (RCU). It is designed to be mounted on a picatinny rail, but can be placed elsewhere. Besides using the remote as a push-to-talk PTT, it can also be used to adjust the volume level of the environmental listening or radio. No PPE.
Flame retardant jacket E2274-106: Spread collar Closure by 5 covered snap buttons 1 patch breast pocket One inside pocket on the right 2 lower patch pockets with flaps Turned-back cuffs Wider flaps. Composition: 52% cotton, 38% type-F acrylic, 10% satin flame-retardant viscose - 340 gr/m². Available sizes: 0-6 FR. Available colours: Navy. Complies with: EN ISO 11612 A1/B1/C1/D2/E2/F1 and EN ISO 11611 class 1.
Arm protection for riot police forces. Sizes: 0 (XXS-S) / 1 (M-L) / 2 (XL-XXXL)
Lithium 3 V battery (CR2450) for welding filters. No PPE.
To use with rescue harnesses, allows the victim to be pulled out of the manhole in vertical position.
New portable 5-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases, for added precision at work. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,CO and NO2.
Duolens glasses with modern fashion-look and extra eyebrow protection. Size is between the Pheos and the Pheos S. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with temple ends with non-slip components. Polycarbonate CBR23 lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog- free on the inside and easy to clean. Frame: white/black.
Complete kit contains, SR 500 fan unit, SR601 hood, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Belt in blue leather. Adjustable to max 115cm.
The 3M™ X5 Lamp Holder is designed for mounting (mining) lamps on 3M™ industrial safety helmets and consists of a dark gray ABS part and 2 strips of 3M™ VHB™ double coated pressure sensitive adhesive. When properly attached to an industrial safety helmet, the slot can accommodate multiple brands of lamps. Not certified seperately as PPE.
The 3M™ Premium 4 Point Chin Strap X5-P4PTCS2 has a magnetic buckle and features an exclusive selector function to switch between EN397 or EN12492 safety standards. No PPE.
The serrated blade retracts automatically after the cutting movement, is suitable for left and right handed people. With safety lock both to close and to fix at a cutting depth of 6mm. Cutting depth 22mm, easy blade change.
Set of 10 belt loops with trigger hook attachment to attach tools up to 2.3kg.
Extra deep, with innovative self-closing system, making it almost impossible for parts to fall out of the bag. Easy to take things out because no extra action is needed to open the bag.
TYVEK® IsoClean® Gown option 00 Bulk ( Bulk Packed) Serged seams. Bound neck with ties. Knitted Cuffs. Bound ties originating at center front waist. White. Available sizes: M and 2XL For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.
TYVEK® IsoClean® hood with ties. option MS Clean-processed and gamma-sterilized. Bound seams. Bound hood opening for low particle shedding. Full face opening. Ties with loops for adjustable fit. Packed in a dual barrier validated packaging system (double bagged). White. Available sizes: one size For cleanrooms up to ISO 5, GMP A/B CLEAN PROCESSED + STERILE.
Tyvek® IsoClean® IC183B TS Coverall Bound seams, bound neck, raglan sleeves. Covered elasticated wrists and ankles. Single packed. White. Available sizes: 2XS - 7XL (2XS, XS, 4XL, 5XL, 6XL <(>&<)> 7XL are made to order. Terms <(>&<)> conditions apply.) For cleanrooms up to ISO 5, GMP A/B. STERILE ONLY.
Coverall – CTL428CM • Zipper closure • Tunneled elastic on wrists (with thumbloops), ankles, and back half of waist Available sizes: S - 3XL For cleanrooms ISO 4-6 CLEAN MANUFACTURED AND NON-STERILE
Boot Cover – CTL903CMP • Tunneled elastic top • 19" high • Non-skid vinyl sole Pack: 50 pair Available sizes: SM/ LXL/ 2XL For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND NON-STERILE
Navy blue disposable nitrile glove. Powder-free and latex-free. Ambidextrous, with roughened fingertips. Designed for use in laborat ories and research environments. Version with long cuff.
Multifunctional safety helmet for working at heights and rescue work. With MIPS technology, which combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Light ABS helmet shell offers a high level of protection and durability. The 6-point textile suspension offers optimal fit and comfort. Euroslot adapters (30 mm) on the side for fitting earmuffs. Clamps for attaching extras with an elastic band, e.g. goggles and LED light for climbing helmet. Head circumference: 51-63cm .Conforms to EN 397, MM, LD, -30°C / EN 12492 .
The Fitted Polo Rewear is part of the Rewear collection: a fully sustainable and circular clothing package. This polo is made of 50% Bio-cotton and 50% Recycled Polyester. MATERIAL 180 g/m² 50% organic cotton / 50% recycled polyester Piqué Available colors: black Available sizes: XS - 5XL
Mobile anchor point made of sharp edge tested webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1 metre. Anchor point for protection of 3 persons with a maximum weight of 300kg.
Men's stretch trousers in Alsi-flex. Quality: 79% recycled polyester, 21% cotton - 265 gr/m² super stretch Available colors: black, shadow blue, bottle green, charcoal, convoy gray, camel brown. Available Sizes: 38-64.
