BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Carrier: Nylon / Dyneema® with roughened nitrile coating. Nylon inner glove for better comfort. Waterproof. Protection up to 500BAR. Sizes: 9 and 11. In line with EN388: 4.5.4.4
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 457mm.
Welding and heat protection glove made of synthetic material with cut protection level E. Suitable for welding and medium heat environments, especially TIG and MIG. Length: 35–39 cm Sizes: 7–12 Compliant with: EN407: 42324X EN12477: TYPE A EN388: 3X32E
Glove with high cut protection (51N) and latex coating for excellent grip. Leaves no marks on surfaces. Sizes: 7-11 Compliant with EN 388 3X43F, EN407:X2XXXX
Cut resistant gloves with Kevlar® liner in combination with roughened latex coating offer good grip and optimal protection against cutting injuries in both dry and damp environments. Sizes: S / M / L / XL. Available in: blue.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for extra wide arms. Lenght 40 cm.
Glove with excellent grip in oily environments, preventing slippage and injuries. Coated knuckles and triple nitrile foam palm coating for a solid oil barrier. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.2.C, EN407:2020: X.1.X.X.X.X
5-finger gloves, palm and back in water and oil repellent cowsplit leather, inner lining of reinforced TEKINOX. Sizes: 11. Application: tasks with extreme risk of cutting, heavy industrial activities. Standards: EN388:2016 4.X.4.4.F, EN407: X.1.X.X.X.X
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 305 mm.
Comfortable, cut resistant glove using the unique Dyneema® Diamond Technology. Its 13 gauge lining has double the cut resistance in comparison with a concurrential glove, but keeps comfort at a high level (high sensitivity and a cool feeling). It has a polyurethane coating with high grip and without silicones. Cut resistant properties are guaranteed because no glassfibre is being used. Perfect for use in dry environments with high cut risks such as paper and glass industry, assembly or logistics. Available sizes: 7-12.
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
Impact glove with new and unique KOROYD impact protection technology. An optimized PU elastomer absorbs and distributes the impact energy through its unique construction, reducing the load on critical parts of the hand. Advanced and increased impact protection: ANSI/ISEA level 3. Extremely suitable for heavy environments. 18 gauge, Nitrile-PU foam coating. Reinforced thumb attachment. Touchscreen. Sizes: 7-12. Conforms to: EN388:2016: 4.X.4.3.F.P
Soft and versatile glove with cut protection (level C/ANSI cut A3), made from recycled polyester and bio-based Dyneema® fibers - an innovation that limits dependence on fossil raw materials. Good for the environment! 13 gg knitting technique with touchscreen function - use your smartphone with gloves on. Less water consumption due to the new nitrile foam coating. Sizes: 6-11. Conforms to: EN 388:2016: 4.X.4.2.C and EN 407:2020: X.1.X.X.X.X.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 30,5 cm.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for narrow arms. with thumb hole Lenght 30 ,5 cm.
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass
Glove with very high cut protection, suitable for handling very sharp parts in the glass and metal industry.
Glove with high cut protection and impact protection. Nitrile coating. Very fine knit, 0.85 mm. 18 gauge. Touchscreen on all fingers. Thumb cavity reinforcement. Sizes: 6-12 Complies with: EN388:2016 4X43FP
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Nitrile coating on the palm with sand grain finish for extra grip. Fleece lining for extra warmth in cold temperatures. Reinforced thumb hole to reinforce high-wear areas. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.F.P
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The 3/4 nitrilfoam coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: HPPE. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex Certified.
Tactial cut protection glove for universal interventions, with excellent dexterity on the 'trigger' finger, touch screen function, padding on the palm, and silicone dots for an excellent grip. With extra choc protection on the back of the hand. Sizes: 6-11.
Glove with impact and cut protection that keeps hands warm and dry. TPR impact protection on top of the hand and over the entire length of the fingers. 70gr Thinsulate™ insulation for extra warmth, the patented waterproof barrier keeps hands dry. Features PVC patches on the palm for extra grip, and an extra layer on the palm provides extra cut resistance. The extended cuff with gaiter closure keeps the dirt out and has reflective bands for extra visibility. The tips of the index, middle finger and thumb are suitable for use with touch screens. Sizes: 8-12. Complies with : EN388:2016 3.X4.4.F.P, EN511:1.2.1
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, impact protection on the back of the hand and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass. Compatible with touchscreens.
Cut-resistant glove made from graphene-based fibre. PU coating. 13 gauge. Touchscreen function. Sizes: 6-11. Conforms to: EN388:4X42B.
Cut-resistant glove made from graphene-based fibre. PU coating. 18 gauge. Touchscreen function with reinforced thumb crotch. Sizes: 6-12. Conforms to: EN388:4X42D.
24-gauge grey graphene nylon and spandex liner with black Soft PU palm coating, reinforcement between thumb and index finger. Touchscreen compatible. Compliant with: EN 388: 3X42D.
Very thin and flexible cut protection glove for fine assembly work with small, sharp objects. The cut protection is made from the world's first bio-based cut-resistant fiber - Dyneema®. This innovation reduces dependence on fossil raw materials and reduces your company's carbon footprint. Good for the environment! The glove is very light, 18 gg and has a PU coating for better grip. Conforms to: EN388:2016+A1:2018: 2X41B
HPPE glove, 13 gauge. Sandblasted foam nitrile coating on the palm and fingertips; elasticated wrist. Maximum abrasion and tear resistance. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D
RubyCut fiber knitted glove, 18 gauge. Foam nitrile coating, nitrile reinforcement thumb/index. Wrist with elastic tightening. Extreme finesse. Oekotex certified. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.3.1.C
RubyCut fiber knitted glove, 18 gauge. Foam nitrile coating, nitrile reinforcement thumb/index. Wrist with elastic tightening. Oekotex certified. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.4.2.D
Knitted glove made of HPPE and cobalt (without fiberglass), 13 gauge. Double RGO GRIP coating (nitrile + microfoam-nitrile) on the palm the back. Elasticated wrist. Touchscreen. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D, EN407:2004: X.1.X.X.X.X
Glove with excellent grip in oily environments, preventing slippage and injuries. Fully and triple coated with nitrile foam in the palm and a latex-free cuff. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.2.C, EN407:2020: X.1.X.X.X.X
Ultralight design: 20% lighter. 13 gauge. Enhanced Fortix® technology: 20% more abrasion resistance. 12 times higher cut resistance (vs. standard HPPE) using Next Generation single strand HPPE yarn developed with INTERCEPT(TM) cut resistance technology. Nitrile coating. Oeko-Tex certification. Food approved. Sizes: 6-12. Conforms to: EN388:2016: 4.X.4.3.F. EN407: X.1.X.X.X.X
Providing incredible EN388: 2016 level F cut resistance (ANSI 105:2016 A8), the glove is light and dexterous able to be worn for long periods of wear. An extended cuff provides added protection to the wrist area and all gloves in the food range can be industrially laundered to the ISO 15797:2018 standard. EN388: 2016 level F cut resistance (ANSI 105:2016 A8); EN388: 2016 4 × 4 X F; New yarn structure delivers improved grip and mechanical performance; Permanent antimicrobial component; Free from glass fibre to prevent product contamination; Tested to EN ISO 15797 industrial wash test to withstand x50 washes at up to 85°c and drying up to 70°c with no effect on cut resistance; Colour coded to prevent cross-contamination; Designed for knife hand use; Ambidextrous.
knitted cut resistant glove (cuff 13cm) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. Long for extra protection of the forearm. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Gives protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Conform: EN 388 4.X.4.2.C and EN407: X.1.X.X.X.X.
Fully seamless, grey, knit gloves withgreyPU coating on a white Dyneema® liner. Available in: grey/white. Sizes: 8 / 9 / 10 / 11 / 12.
Cut resistant, completely seamless grey knit gloves with grey PU coating. Excellent tactility combined with highest level of cut protection. Sizes: 7/8/9/10/11. Suitable or: circumstances in which a good grip and cut, abrasion or puncture resistance are required, such as packaging, installation, assembly, automotive industry, glass and paper industry.
Fully seamless, grey, knit gloves with grey PU coating on a white HPPE / Lycra liner. Available in: grey/white. Sizes: 7/ 8 / 9 / 10 / 11 / 12.
knitted cut resistant glove (8cm cuff) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Available sizes: 7-12. Conform: EN 388 4.X.4.2.C and EN 407:X.1.X.X.X.X.
