BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Cut-resistant glove in special graphene fibers with HCT® micro foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers.
Sleeve in polyester, nylon and glass fiber with adjustable Velcro strap system.Lenght: 475mm. Characteristics: Cuff with excellent protection against heat, cut risks and abrasion.Thermal protection upto 100°C. EN388:2.5.4.2 and EN407:X.1.X.X.X.X
PowerFlex®+ 80-602 glove is the practical answer to the safe handling of glass, metal and plastics. It offers exceptional cut resistance and robust overall mechanical performance, plus superior comfort. In both wet and dry conditions, this glove grips superbly. The PowerFlex® 80-600 is truly a unique glove solution that provides the highly efficient combination of protection plus natural dexterity.
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Antistatic, silicone-free and DMF-free.
Made of graphene fibers, without stainless steel or fiberglass, with unique heat regulation. Odor neutralization and bacteriostatic properties make the arm protector smell fresh and kill harmful bacteria.
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Sizes: 8,9,10.
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
Cut resistant, seemles knitted nylon-spandex-basalt fibre thread, CFR technology,stainless steel fibre yarn gloves (13 gauge) with insulating layer nitrile foam/aqua PU in the palm with reinforcement between thumb and index. approved for food handling, touch screen compatible, . Heat resistant up to 100°C contact heat. DMF free. Designed for heavy work.Sizes: 6-11.
Gloves with high cut resistance and PU coating. 18 gauge. Very thin knit, 0.7 mm. Touchscreen. Reinforced thumb cavity. Sizes 6-12. Complies with: EN388:2016: 3X43F
Highly dexterous glove with high cut resistance. Nitrile foam coating with Aerofit technology (up to 30% thinner). Breathable 21 gauge liner. Food approved. Touchscreen compatible. Sizes: 5–12 Compliant with: EN 388: 3X32F
Thin 18‑gauge cut‑resistant glove with nitrile coating. Touchscreen compatible and food approved. Sizes: 6–11 Complies with: EN 388: 4X31B – EN 407: X1XXXX
Solution for users looking for a glove that keeps hands warm and dry, protects them from contact heat, and offers high protection against cuts.
18 gauge knitted glove made of HPPE, polyamide and Spandex fibres. Nano foam nitrile coating on palm and 3/4 back. Protection against impact on back and fingers. Touchscreen. Sizes: 7 to 11. Conforms to: EN388:2016: 3.X.4.2.D.P
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
Glove with excellent grip in oily environments, preventing slippage and injuries. Triple-coated with nitrile foam in the palm, for a solid oil barrier. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.3.C, EN407:2020: X.1.X.X.X.X
Cut resistant gloves with Kevlar® liner in combination with roughened latex coating offer good grip and optimal protection against cutting injuries in both dry and damp environments. Sizes: S / M / L / XL. Available in: blue.
Cut-resistant gloves with Hagane coil liner in combination with the nitrile foam coating on the palm provide a good grip and optimum protection against cutting wounds in both dry and humid environments. Sizes: 6-10.
Carrier: Nylon / Dyneema® with roughened nitrile coating. Nylon inner glove for better comfort. Waterproof. Protection up to 500BAR. Sizes: 9 and 11. In line with EN388: 4.5.4.4
5-finger gloves, palm and back in water and oil repellent cowsplit leather, inner lining of reinforced TEKINOX. Sizes: 11. Application: tasks with extreme risk of cutting, heavy industrial activities. Standards: EN388:2016 4.X.4.4.F, EN407: X.1.X.X.X.X
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for extra wide arms. Lenght 40 cm.
Winter glove, outer layer in polyester, 13 gauge. Waterproof membrane. Polyacrylic lining. Nitrile foam coating. Touchscreen. Oekotex certified. Sizes: 7 to 11 Conform: EN388:2016: 3.X.2.1.C EN511: 1.2.1
Glove with high cut protection (51N) and latex coating for excellent grip. Leaves no marks on surfaces. Sizes: 7-11 Compliant with EN 388 3X43F, EN407:X2XXXX
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 30,5 cm.
Glove with excellent grip in oily environments, preventing slippage and injuries. Coated knuckles and triple nitrile foam palm coating for a solid oil barrier. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.2.C, EN407:2020: X.1.X.X.X.X
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for narrow arms. with thumb hole Lenght 30 ,5 cm.
Glove with very high cut protection, suitable for handling very sharp parts in the glass and metal industry.
Soft and versatile glove with cut protection (level C/ANSI cut A3), made from recycled polyester and bio-based Dyneema® fibers - an innovation that limits dependence on fossil raw materials. Good for the environment! 13 gg knitting technique with touchscreen function - use your smartphone with gloves on. Less water consumption due to the new nitrile foam coating. Sizes: 6-11. Conforms to: EN 388:2016: 4.X.4.2.C and EN 407:2020: X.1.X.X.X.X.
Very flexible lightweight glove in Dyneema. Hyflex offers excellent cutting resistance. The white outer coating in polyurethane protects the dyneema fibre (and thus the hand) during abrasive activities. This glove with great sensitivity will last and last. Recommended for manipulating materials and tools with sharp edges, e.g. in the automotive industry or in the production of durable goods. Sizes: 6-10.
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 305 mm.
The micropore nitrile palm coating is designed to deliver excellent grip, in both dry and oily conditions. With 360 degrees breathability, hands will be comfortable and free from irritation. EN388: 2016 level E cut resistance Rhino Yarn™ cut resistant technology; EN388: 2016 4 × 4 3 E; Fine 15 gauge lightweight liner; Increased abrasion resistance to level 4 for 2021; High level of tactility and dexterity; Approved for food contact to EU Regulation 10/2011; Touch screen compatible; Breathable liner and palm coating; New micropore nitrile palm delivers good dry and oil grip; Antistatic to EN1149-5: 2008.
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass
Knitted glove made of HPPE and cobalt (without fiberglass), 13 gauge. Double RGO GRIP coating (nitrile + microfoam-nitrile) on the palm and three-quarters of the back. Elasticated wrist. Touchscreen. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D, EN407:2004: X.1.X.X.X.X
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Nitrile coating on the palm with sand grain finish for extra grip. Fleece lining for extra warmth in cold temperatures. Reinforced thumb hole to reinforce high-wear areas. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.F.P
Impact glove with new and unique KOROYD impact protection technology. An optimized PU elastomer absorbs and distributes the impact energy through its unique construction, reducing the load on critical parts of the hand. Advanced and increased impact protection: ANSI/ISEA level 3. Extremely suitable for heavy environments. 18 gauge, Nitrile-PU foam coating. Reinforced thumb attachment. Touchscreen. Sizes: 7-12. Conforms to: EN388:2016: 4.X.4.3.F.P
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The 3/4 nitrilfoam coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: HPPE. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex Certified.
Tactial cut protection glove for universal interventions, with excellent dexterity on the 'trigger' finger, touch screen function, padding on the palm, and silicone dots for an excellent grip. With extra choc protection on the back of the hand. Sizes: 6-11.
Glove with impact and cut protection that keeps hands warm and dry. TPR impact protection on top of the hand and over the entire length of the fingers. 70gr Thinsulate™ insulation for extra warmth, the patented waterproof barrier keeps hands dry. Features PVC patches on the palm for extra grip, and an extra layer on the palm provides extra cut resistance. The extended cuff with gaiter closure keeps the dirt out and has reflective bands for extra visibility. The tips of the index, middle finger and thumb are suitable for use with touch screens. Sizes: 8-12. Complies with : EN388:2016 3.X4.4.F.P, EN511:1.2.1
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, impact protection on the back of the hand and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass. Compatible with touchscreens.
Welding and heat protection glove made of synthetic material with cut protection level E. Suitable for welding and medium heat environments, especially TIG and MIG. Length: 35–39 cm Sizes: 7–12 Compliant with: EN407: 42324X EN12477: TYPE A EN388: 3X32E
Very thin and flexible cut protection glove for fine assembly work with small, sharp objects. The cut protection is made from the world's first bio-based cut-resistant fiber - Dyneema®. This innovation reduces dependence on fossil raw materials and reduces your company's carbon footprint. Good for the environment! The glove is very light, 18 gg and has a PU coating for better grip. Conforms to: EN388:2016+A1:2018: 2X41B
HPPE glove, 13 gauge. Sandblasted foam nitrile coating on the palm and fingertips; elasticated wrist. Maximum abrasion and tear resistance. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D
RubyCut fiber knitted glove, 18 gauge. Foam nitrile coating, nitrile reinforcement thumb/index. Wrist with elastic tightening. Extreme finesse. Oekotex certified. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.3.1.C
RubyCut fiber knitted glove, 18 gauge. Foam nitrile coating, nitrile reinforcement thumb/index. Wrist with elastic tightening. Oekotex certified. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.4.2.D
Knitted glove made of HPPE and cobalt (without fiberglass), 13 gauge. Double RGO GRIP coating (nitrile + microfoam-nitrile) on the palm the back. Elasticated wrist. Touchscreen. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D, EN407:2004: X.1.X.X.X.X
Glove with excellent grip in oily environments, preventing slippage and injuries. Fully and triple coated with nitrile foam in the palm and a latex-free cuff. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.2.C, EN407:2020: X.1.X.X.X.X
Ultralight design: 20% lighter. 13 gauge. Enhanced Fortix® technology: 20% more abrasion resistance. 12 times higher cut resistance (vs. standard HPPE) using Next Generation single strand HPPE yarn developed with INTERCEPT(TM) cut resistance technology. Nitrile coating. Oeko-Tex certification. Food approved. Sizes: 6-12. Conforms to: EN388:2016: 4.X.4.3.F. EN407: X.1.X.X.X.X
Glove with high cut protection and impact protection. Nitrile coating. Very fine knit, 0.85 mm. 18 gauge. Touchscreen on all fingers. Thumb cavity reinforcement. Sizes: 6-12 Complies with: EN388:2016 4X43FP
Providing incredible EN388: 2016 level F cut resistance (ANSI 105:2016 A8), the glove is light and dexterous able to be worn for long periods of wear. An extended cuff provides added protection to the wrist area and all gloves in the food range can be industrially laundered to the ISO 15797:2018 standard. EN388: 2016 level F cut resistance (ANSI 105:2016 A8); EN388: 2016 4 × 4 X F; New yarn structure delivers improved grip and mechanical performance; Permanent antimicrobial component; Free from glass fibre to prevent product contamination; Tested to EN ISO 15797 industrial wash test to withstand x50 washes at up to 85°c and drying up to 70°c with no effect on cut resistance; Colour coded to prevent cross-contamination; Designed for knife hand use; Ambidextrous.
