BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Classic fleece vest with the rich appearance of polyester. This vest has two zip pockets that allow you to store your belongings. Quality: 100% Polyester, 225 g / m². Available colors: Dark gray, black, navy and khaki. Available sizes: XS - 5XL.
Salvequick Plastic Plasters are convenient high-quality plasters. The plasters are allergy tested. They are easy to apply, flexible and convenient to use. CONTENT: Each refill contains 45 plasters (27 plasters measuring 72 x 19 mm and 18 plasters measuring 72 x 25 mm). 6 refills/box.
Cottover hoody with ribbed cuffs and bottom hem. Inside of the hood in single jersey. Two front pockets. Quality: 80% organic Fairtrade cotton, 20% recycled polyester, 280 g / m². Available sizes: S-4XL.
Flame retardant, anti-static hi-vis bodywarmer Vikja: Straight collar; Zip closure under flap with touch <(>&<)> close fastening; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket. Quality: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available sizes: S-3XL. Available colours: Fluo yellow/navy and fluo orange/navy.
White clog made out of microfiber with steel toecap. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 40-48.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Waterproof fully lined winter glove with soft, durable goat grain in the palm. The glove has touchscreen function on the back of the middle finger, pre-shaped fit and synthetic stretch material at back of hand. The cuff, which has a half<(>&<)>#02;length cut, is elastic at wrist to ensure that the glove stays firmly in place. Sizes: 6-13.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 50 inches. Material: Rubber.
Corresponding dispenser(s): 1054720 or 1060911.
Soft and form-retaining Hi-Vis T-Shirt in tricot with a cotton finish on the inside for comfort. T-Shirt short sleeves with heat seal reflection. Quality: 113: 55% polyester / 45% cotton, 200 g/m². Available colours: Fluo yellow/navy and fluorescent orange/navy. Available sizes: XXS-4XL. Complies with: EN ISO 20471 class 1-2.
Emergency first aid kit Industry is supplied with a wall holder. This first aid kit is specially composed to meet the needs of the "workshop". Dimensions: L 44.5 cm x H 32 cm x D 15 cm.
High shoe in waterrepellent full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF, SRC antislip, oil and carburant resistant. Removable, perforated insole with PU and Elastopan layer for reducing pressure points and stress, while standing and running for a long time . 100% metalfree. Sizes: 35-48.
Low shoe in full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. PU/PU outsole. Removable, polyurethane insole with textile layer. Sizes: 36-47.
PFAS free and inherently flame retardant work jacket in Cantex Weld on the front and sleeves, and Cantex Weld/Cantex Weld Stretch on the back. Available sizes: XS-4XL. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
High shoe in waterrepellant full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with breathable liner in 3D-textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Uvex insole, ultra breathable and moisture absorbing. With perforations for better ventilation. Shockabsorbing and comfortable structure. Available in width 10, 11, 12, 14.
The new lightweight uvex pheos planet safety helmet is made of 30% biobased material and retains its shape even under lateral pressure – and meets the safety requirements in the construction and industrial sector. 6-point textile harness with rotary knob, the headband is made from 50% recycled helmet shells. Thanks to the efficient accessory system, the helmet can be quickly and easily adapted to individual needs, such as attaching uvex pheos earmuffs, helmet-mounted lamp or visor. Head circumference : 52-61 cm. PCF (Product Carbon Footprint) = 2 ,0kg CO².
Complete kit with SR 500 fan unit and protective helmet SR 570, 1 protective film, standard battery, battery charger SR513, belt SR508, 2 pieces of SR510 P3 particle filters, 2 filter adapters, 10 prefilters SR221, 2 prefilter holder, flow meter, plug kit, cleaning tissue and user instructions. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Proflex knee support with reinforced nylon shell for protection against perforation. The knee support is filled with a gel for bette r comfort and support. The Proflex is cut resistant, abrasion resistant and has a non-slip surface for better grip on the work surfa ce. Sizes: universal size.
Red hearing protector with neck band. Attenuation: SNR 35. Material: plastic. Features: allows simultaneous use of helmets or other head wear. Sizes: universal. Applications: pneumatic machines, compressors.
P2 dust filter from 3M for direct connection to 3M half and full face masks. Protects against harmful dust, mist and smoke particles .
Very supple, black fireman's gloves, 100% leather with lining of interlock Kevlar® and cotton. Leather wrist protection with Velcro closure and 15 cm long cuff of supple cowsplit leather. Water repellent and heat resistant. Available in: black. Sizes: 8 / 9 / 10 / 11 / 12, length 35 cm, cuff 15 cm.
A2 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65 °C. Can be used in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %. Suitable f or: processes involving chemical risks. Weight: 180g.
Sign according GHS normation in self adhesive polyester: corrosive. Size: 100x100mm. 4 labels per card. No PPE.
Helmet liner in flame retardant material. Fits between the helmet shell and the interior, for warmth without compromising on comfort. With zipper connection to the frost neck cape.
Lanyard, 1,5 metre length, consisting of elastic strap with integrated shock absorber. Fitted with one standard carabiner and one with big opening. Max user weight: 140kg.
ZOLL AED Plus, Type 123 lithium batteries, 10 pieces with storage sleeve. Suitable for the Zoll AED Plus semi-automatic (1060426) or the Zoll AED Plus fully automatic (1060427).
Tripod with tubular aluminium legs for lowest possible weight. Four eye bolts in the head that can be used as anchor points. Tripod is adjustable from 1.35 to 2.35 metres. Tripod is meant for two people, with a total weight of 500 kg. To be used in combination with winch and rescue set Rollgliss or SRL Weight 14.5 kg. Without carrying bag: 1003772.
Comfortable and lightweight plastic safety glasses with trendy temple design and soft nose bridge.
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Harness is very easy to put on. Integrated fall indicator on the front and back, suspension trauma straps and padding on the waist belt.
High shoe S3 in waterresistant black full grain leather with uvex waterstop technology for protection against splashing water and 200J synthetic toe cap and steel antiperforation sole. Innovative uvex bionom x design creates a biomechanical symbiosis between the foot, the upper, the sole and the floor. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU (i-PUREnrj) with strong antislip values and very good shockabsorption. Free of phthalates and silicones. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 38-52.
Face shield in clear polycarbonate for use with face shield holder S89 or helmet face shield holder S54 CE.
Face shield in clear polycarbonate for use with face shield holder S89SR or helmet face shield holder S54 CE.
Absorbent pillows measuring 43 cm x 48 cm. These heavy-weight cushions are packaged in a box. Packaged per 16 pieces. Ideal for the absorption of chemicals, acids and bases or universal absorption. The green colour identifies these pillows as chemical waste. Absor bent pillows for regular leaks in the same place. Absorption capacity: 105 litres.
Magnifying welding glass for Speedglas 9000, 9001 and 9002 series.
Adsorbs a wide range of chemicals, including acids and caustics Chemically inert - product does not degrade or react with adsorbed liquid. Green colour alerts workers that product is used with hazardous liquids. Green colour also allows easy identification for separate waste disposal. Perfect to clean up chemical spills or for use in laboratories Adsorption capacity: 76 litres
ALLWIK® Pillows feature a dark spunbond outer covering filled with gray polypropylene. Versatile - for use with all oil and water-based fluids.
High shoe in nubuck leather and Techno leather (long-lasting), with a steel anti-perforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant Vent-Air liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Earplug in TPE with soft strips for an easy fit in the ear canal. Equipped with a cord and handles to easily remove earplugs.
Martor spare knife type 37BR, packed per 10 pieces. PPE Category not applicable.
Model wallmounted eye/face wash including a stainless steel 11" round bowl, antimicrobially treated Axion MSR eye/face wash head to help protect against the growth of mold and mildew on the treated components. Inverted directional laminar flow and integral 3.7 and 1.3gpm flow controls, chrome-plated brass stay-open ball valve equipped with stainless steel ball and stem, and chrome-plated brass in-line 50 x 50 mesh water strainer. Unit shall also include cast-aluminum chromate protected wall bracket, tailpiece and trap, universal sign, 1/2" inlet, and 1-1/2" waste.
High-shoe S3, semi-orthopaedic, in full grain leather with toecap in aluminium sole with L-Protection. Equipped with 100% Nappa cowhide leather lining. Sole in Nitrile and HRO. Antibacterial insole. Sizes: 39-47.
This practical bracket permits mounting of the USED BLADE CONTAINER No. 9810 on piping, tubular supports, posts or walls (just attach the BLUE plate!). IMPORTANT NOTE: This bracket can only be used with the Model WITHOUT the lateral notches! No PPE.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE. not damaged by scuffing from pallets. Available in different colours and sizes. Not PPE.
Eye-catching, signal red galvanised 52L bin. Used for cleaning pads, sponges and other waste that is saturated with flammable and/or environmentally harmful liquids. Waste bin has self-closing lid that is operated with a foot pedal or manually. The bottom edge has ventilation openings to prevent self-ignition caused by heat build-up.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 41 cm.
The 0.63 mm thick stainless steel blade is ideal for various materials. The ergonomic aluminium holder offers a high degree of stability and is suitable for right and left handers. The thumb can remain on the slider while cutting but the blade will slide back after use. Ideal for use with safety gloves. Replacement blades 199: 1016574
Inox scissors for cutting fabric or paper. Does not cut in skin.
Overboot against electricity. Sole is produced with a vulcanised rubber and tested against 35000V. Each boot is tested separately against 25000V before getting sold. 100% waterproof and adjustable in height. Easy to pull out, because of V-shackle. In accordance with: EN50321 / EN ISO 20347 OB HRO SRA.
Bandage scissors for cutting bandages or tape Material: stainless steel. Matt Silver - can be sterilised. Dimensions: 14 cm
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Gore- Tex. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Pull straps in leather Sizes: 38-48.
Standard Adjustable footrest Height is adjustable to two positions - Thanks to the 'floating' elevation, you can stretch your legs, stimulating blood circulation - The roughened surface massages the soles of the feet for stress reduction
Men's trousers in 65% polyester/35% cotton, 245 g/m² with 2 side pockets, 1 thigh pocket, 1 back pocket with flap and ruler pocket. Modern design with hi-vis details. Available sizes: 36-64. Available colours: Grey/Hi-vis orange, Navy/Hi-vis yellow. No PPE.
Firefighter jacket Tiger Plus Elite with NOMEX® COMFORT GRID, 200 gr / m², SOFIDRY: ▪ High in 1 piece upright closing collar with wide closure. ▪ Shoulder pads with internal 3D thermal reinforcements and external silicone coated Kevlar® reinforcements. ▪ YKK anti-panic crystal closure with a waterproof flap and velcro closure. ▪ Pockets: o Radio pocket and 1 flashlight holder. o Napoleon pocket + pen holder in the side of the jacket. o 2 patched outer pockets with slanted flap with flap. o Equipped with D-rings for glove attachment. o Knitted aramid cuffs. o Various microphone loops. o All pockets with pull loops. ▪ Pre-formed 3D sleeves with insert. ▪ Unique protectors on the pressure points made in 3D and with RHTI24> 40sec! ▪ Equipped with external elbow protection and reinforced sleeve ends. ▪ The underside of the jacket is provided with an anti-absorbent layer for perfect watertightness. ▪ Extended back for better protection.
Inox scissors (15cm) for cutting fabric or paper. Does not cut in skin.
Inexpensive full body harness with 2 D-ring and pas through buckles. Only shoulder and chest straps are adjustable. Test Weight: 140kg. Universal size.
Creamy handwash foam for stressed skin. Contains moisturizing conditioner, aloe vera and glycerin. Skin neutral pH and citrus perfumed. Contains 1000ML. Suitable for showering. With Ecolabel.
Arm protector heat and cut resistant. Length 45 cm.
Sleeve in polyester, nylon and glass fiber with adjustable Velcro strap system.Lenght: 475mm. Characteristics: Cuff with excellent protection against heat, cut risks and abrasion.Thermal protection upto 100°C. EN388:2.5.4.2 and EN407:X.1.X.X.X.X
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length: 0.6 metres. Anchor point for protection of one person.
Core jacket rope of 20 meters and 10.5mm diameter with a knot at one end and a musketon at the other, available in various lengths. Conforms to EN353-2
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with 2 Skalt Comita aluminium hooks with 20 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.
