BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Lightweight workwear trousers in a modern fit with leg pockets on each leg and back pockets with flap. Sizes C42-C64 are adjustable. By unpicking the red stitching at the hem the trousers can be lengthened by 5 cm. Quality: 65% polyester, 35% cotton 245 g/m2. Available Colours: sky blue, red, navy, black, green, white and grey. Available Sizes: C44-C62, D84-D120, C146-C156.
Economical solution for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless polyester lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
Blue split leather glove, winter lined with Scotchgard leather reinforcements in the palm. Thumb and forefinger tips are touchscreen compatible. Protects against temperatures up to -30°C (slightly wet or dry environments). Sizes: 7-11.
Coverall Shift with concealed zip with concealed press studs, thigh pocket with concealed press stud closure, ruler pocket with tape measure, Cordura® knee pockets with Velcro closure, 1 back pocket with concealed press stud closure, back pleats, 1 breast pocket with concealed press stud closure, back elastic, reflective piping, inset front pockets, D-ring , extra insert at crotch to prevent tearing, concealed press studs. Quality: 65% / 35% cotton / polyester, 2/1 twill weave, 290 gr / m². Available sizes: 44-66. Available colors: Blue / gray, navy / gray, charcoal gray, black / gray and red / gray. Compliant with: EN 14404.
4-points chinstrap for Pheos helmet. No PPE.
The Vaski is a hi-vis ladies rain jacket which also offers a high degree of protection to the wearer. The jacket is made out of a light, but high quality fabric and complies to many international standards such as IEC 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5 and EN 13034. This premium jacket is equipped with a YKK zipper with handy grip for easy opening and closing. The sleeve ends are preshaped and the back is extended for your comfort. Available sizes: XS-2XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
This glove was developed together with experts from the Dutch Defense. The target was to develop a glove that offers both a maximum protection during fast roping practices and a high tactility for handling weapons in case of interventions. Where most fast roping gloves fail to meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm offers superb grip on both dry and wet ropes and is a great buffer against the heat accumulation during fast roping. On top of that, in this case handling weapons with these gloves is no longer a theme. Sizes: 7-14.
The 100% cotton glass workers jacket offers maximum comfort and has an AFLAMMIT® flame retardant treatment. Composition: 100% flame retardant cotton 490g/m². Available sizes: M-2XL. Available colours: Green. Complies with: EN ISO 11612 A / B2 C2 D2 E2 F2.
Sweater bicolor seams: Round neck, Sleeve cuffs, Dryer resistant, American fleece, Cotton/Polyester, Bi-colour, Bicolour, Sweaters, 60 °C, Construction, Pa inters <(>&<)> Plasterers, Transport <(>&<)> Logistics, Bicolour Seams, 60°C washable. Quality: 70% Cotton / 30% Polyester, 280 g/m². Available sizes: XS-8XL. Available colors: Navy/Royal Blue, Navy/Black, Black/Grey, Black/Orange, Black/Red and White/Black.
High shoe in waterrepellent full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF, SRC antislip, oil and carburant resistant. Removable, perforated insole with PU and Elastopan layer for reducing pressure points and stress, while standing and running for a long time . 100% metalfree. Sizes: 35-48.
Sponge sweatband for welding helmet G5-01. Packaged in sets of three. Not separately certified as PPE.
High shoe Glove in nubuck leather with aluminium toecap and a synthetic anti-perforation sole. Equipped with TPU heel reinforcement and scuffcap. Inner lining in breathable textile and insole in polyurethane foam. Sole in PU/Nitrile, resistant to 300°C. Sizes: 35-48.
Face shield in clear polycarbonate, length 215 mm. For use on EVO safety helmets. Marking: 1 AT 3 8-1-0 9 KN.
Protects against sulphur dioxide, acidic gasses and vapours. For use in combination with a half or full face mask with standard threads. Class 2 gas filter for maximum concentraiton of 0,5%.
Low shoe in microfiber, with a synthetic antiperforation sole and synthetic 200J toecap. Winch closing system. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SR antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-49. with: EN ISO 20345 S3S FO SR ESD.
Butyl rubber glove against very aggressive chemicals. Improved ergonomics and increased flexibility through a unique butyl formula that feels soft and maximizes flexibility and dexterity. A reinforced grip due to a raised diamond pattern. Length 35 cm, thickness 0.35 mm. Palm thickness: 28 mil/0.7mm According to EN 374-1:3016 TYPE A - ABCIKMPST and 374-5:2016 EN 16350 - EN421
Protective foil for visor of 3M full face masks 6700S, 6800S and 6900S. Protects the visor against scratches and liquids. Suitable f or: processes involving chemical risks.
Replacement earplugs for X-cap (1015672 en 1032428). Sold in a bag of 5 pairs. Available in: lime yellow.
Jaune, comfortable gas goggles with large field of vision and frame in PVC. Fits perfectly over prescription glasses, gas-tight. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Motor unit Clean Air for suit RJS, including battery, hose, and belt. Filters and battery charger to be ordered separately.
Pulley with carabiner to attach to tripod for cable of winch or fall arrest block.
Mildly perfumed gel based on the purest ethanol with antifungal effect. Use biocides carefully. Read the label and product information before use. Dispenser: 1049021
High shoe in hydrofugated microfiber/textile, fitted with a steel toecap and non metallic antiperforation midsole. Lining in Gore-Tex, insole ESD. Outsole in PU/PU, resistant to fats and oils. Sizes: 36-48
Safety shoe of the urban sport type, designed with anti-fatigue technology and made from 63% biobased or recycled materials. These black shoes are ESD electrostatic dissipative and comply with EN 61340-4-3 and EN 61340-5-1 standards, protecting electronic devices from electrostatic discharge. The upper is made of recycled microfiber with a TPU insert at the heel for good support and better foot alignment. The lining is made of 3D Surf mesh, providing protection, comfort, and ventilation. The padded tongue and side inserts prevent materials from entering the shoe. The padded top of the shaft offers extra comfort and protection at the ankles and Achilles tendon. The closure system consists of laces through metal eyelets and Quick LIO hooks, with two flat laces of 160 cm. The insole is made of PU Dynamic Biomass Balance with memory foam, which cushions pressure points, improves weight distribution, and absorbs heel shocks. The Link ESDTM system ensures electrostatic dissipation. 35-48 Conform: EN ISO 20345:2022
Atex headlamp suitable for all explosion-proof environments (Zone 0 - EX II 1G Ex ia IIC T4 Ga), with 2 brightness levels (high and low), dust and water resistant IP67, up to 12 hours of autonomy, high impact resistance and tiltable. 3x AAA batteries included. Minimum/maximum operating time: 5 hours/12 hours
uvex 3 quatro – Safety Boot for Extreme Conditions Robust, lightweight, and comfortable: the uvex 3 quatro is made from durable materials to deliver maximum protection and all-day comfort in demanding environments. Key Features - Hydrophobic leather upper & warm lining - Extra-wide fit, sizes 36–40 designed on a women’s last - Removable antistatic insole Protection & Comfort- - uvex i-PUREnrj midsole with energy return (10% recycled material) - PU outsole, foamed polyurethane scuffcap & heel basket - Metal-free toe cap, steel penetration resistance - Reflective elements, ESD-certified Application: heavy-duty construction and industrial environments
Can be combined with knee pads (art. 1066122). Quality: 90% Sorona 4-way stretch, 10% polyester Available colors: Fluorescent yellow/enamel blue. Available sizes: Unisex (32-68) Conforms: EN ISO 20471 Class 1.
Liquid-tight, black gloves made of neoprene. Freedom of movement due to flock-lined cotton lining. Better grip due to non-slip finish. Good chemical resistance to acids and solvents.
A2 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 2 gas filter: for max. conc entration of 0.5%.
Supple winter gloves made of yellow cowhide leather with a warm lining. These gloves have an ergonomic design and provide high tactility. Available in: yellow cowhide leather. Sizes: 9 / 10 / 11.
Full-face mask Basic Plus is the economical version of full-face mask 3S. Mask made of very comfortable, high-quality rubber. Antifo g visor made of acetate, provides wide field of vision (80 %). Speech is conveyed via exhalation valve located just above the filter connection. The headband is easily adjustable, no carry strap for hanging the mask around the neck. Fitted with standard EN 148 thr eaded connection for filters or air hoses with matching coupling.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate with silicate coating, provides very wide field of vision (95 %). Speech is conveyed via the speech membrane, which provides clear speech transmission. Speech membrane is positioned so the filter is not in front of it. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry strap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coupling. Also available order in size small or in silicone rubber.
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 300g.
Standard casing for hand wheel valves. Not PPE.
Water and chemical resistant high shoe in coated leather, with a steeltoecap and antiperforation sole, waterresistant padded tongue. Anti-transpirant liner in Sympatex membrane Airflow. Leather insole, outsole in nitrile and polyurethane, oil-, petrol- and acid resistant, antistatic and antislip. Colour: black/grey. In line: ISO EN 20345 S3 HRO SRC.
Roll of white paper for paper roller on examination table (Art: 1006179). Dimensions: 50cm x 50m.
REAKTORHGP3 screw-in filter DIN 148 with plastic case. Protects against radioactive iodine, highly toxic particles, and smoke and haze particles. For use with a full-face mask and standard thread. Weight: 307 g.
A2 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 2: up to max concentration of 0.5%. processes with chemical risks.
Safety knife with an additional slider on the back of the cutter. For work with triple-walled corrugated board boxes. MAXISAFE adapts to the type of cut required at the time, be it sideways, horizontal or straight from "up top". Designed for a minimum of effort at a maximum of efficiency. Ergonomically styled plastic handle with metal wear- protector at the blade outlet.Welcome the safest and most versatile knife mechanism in the world! For use by right- and lefthanders. "GS- TESTED FOR SAFETY". Easy blade change: no extra tools required. No PPE. Blades: 1024827
Fully nitrile coated glove. Flexible and close-knit glove for excellent grip in wet and oily conditions. Unique: Also checked for food contact. Available in sizes: 7, 8, 9, 10 and 11.
Martor stainless steel trapezoidal reserve blade 610 for food industry. Packs of 10. PPE cat.: n/a.
Dispenser with 500 pairs of disposable earplugs suitable for lower noise levels. The conical shape allows the earplug to be introduced into the ear canal easily, where the foam will expand to the ear canal's individual shape. Simply turn the knob at the bottom of the dispenser and the earplug will be dispensed into your hand. For the sake of hygiene, the container is replaced in its entirety. All Moldex products and packaging are 100% PVC-free. Wallholder available (SAP 1001186). MelLows SNR = 22 dB
Safety helmet with slide adjustment, short peak, made of strong ABS, with 6-point textile interior (51-63cm) and highly absorbent hydro-flock sweatband. Non-ventilated. With European 30mm slot for attachment of hearing and face protection. With UPDATED built-in face shield that easily slides over glasses. Mark A, optical class 1, with easy to operate side-pieces. Anti-scratch and anti-vapour coating. Colours: white, yellow, blue, red, green, orange, black.
The real remanent air-purifying spray. Natural and very powerful, for a fresh and clean atmosphere. Each spray dispenses 0.11 ml of solution and treats an area of 20m³. Also suitable for combating microbial particles in the air. Viruside test results available upon request. Use biocides safely. Always read the label and product information before use.
Super lightweight sportive spectacles (21g) in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. Flexible frame with soft temples (XST). The clear polycarbonate lens is fog-free on the inside and anti scratch on the outside.
Antistatic clog autoclave Studium, very suitable for surgery and aseptic places. With antislip SRC, antistatic ESD and shock absorption in the heel. Adjustable heel strap. Autoclavable up to 134°C. Available in different colours and double sizes. Sizes: 35/36 - 45/46.
Standard Adjustable footrest Height is adjustable to two positions - Thanks to the 'floating' elevation, you can stretch your legs, stimulating blood circulation - The roughened surface massages the soles of the feet for stress reduction
Bicolor t-shirt in 100% cotton, 190 gr/m² single jersey. available sizes: XS-7XL. Available colours: Khaki/Black, White/Darkgrey, Grey/Black, Black/Grey, Darkgrey/Black, Black/Red, Black/Orange, Black/Lime, Navy/Red, Navy/Royalblue, Royalblue/Navy, Navy/Lime. Stockarticle in Darkgrey/Black sizes XS-L
Poloshirt bicolor, 50% cotton/50% polyester, 180 gram/m² piqué. 1 left breast pocket, neck tape and 3-buttons closure. Straight model with side splittings. Very durable, color-and formretaining. Available sizes: XS-7XL. Available colours: Khaki/Black, White/Darkgrey, Grey/Black, Black/Grey, Darkgrey/Black, Black/Red, Black/Orange, Black/Lime, Navy/Red, Navy/Royalblue, Royalblue/Navy, Navy/Lime. Stockarticle in Darkgrey/Black sizes XS-L
System for attaching most types of chemical gloves to the garment sleeve through the use of 2 concentric rings. Very easy to attach your chemical gloves to the Chemmax coverall. 1 box contains 5 sets for 5 coveralls (10 black and 10 white rings). For use with CHEMMAX 1,2 and 3 coveralls. In line with EN 14605 Type 3 in combination with coveralls.
Super-light safety helmet for working at height, with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-63 cm) and sweatband. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is required. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. industry, contractors and installation companies. Colours: white, grey, blue, light blue, green, yellow, yellow HiViz, orange, orange HiViz, red, black.
Kit with 10 ABS holders in white and red letters. 20 cards in polypropylene for scafftag inspection. 1 permanent marker. All marking in DUTCH.
Refill bag with 3M™ 1100 earplugs for use with the 3M™ One-Touch™ Dispenser. SNR: 35dB.
The 3M™ DBI-SALA® Utility Belt XL/3XL (102-137cm) is compatible with all 3M™ DBI-SALA® belt holsters and tool pouches. Padding inside two layers of Cordura provide for durability and comfort. No PPE.
Safety helmet with integrated eye protection made of ABS with badge holder. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Elbow and forearm protection which gives users close to 100% covering of the forearm. With anti-slip band on the inside to ensure that the protection stays in position.
Low shoe S1P in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12: 35-52.
Flame retardant, antistatic and arc shirt with flat collar, closure with hidden press studs, 2 patch pockets with flap, 1 loop for gas detector, round inset sleeves with narrowing by press studs. Quality: 54% modacrylic + 44% cotton + 2% AST; ± 180 g / m². Available colors: Marine. Available sizes: S-3XL.
The Slice® 10593 Auto-Retractable Utility Scraper is another finger-friendly® addition to our expanding line of safety tools. It fea tures a rounded-tip 10526 safety blade housed in a sturdy, ergonomic, reinforced nylon handle with soft grips for user comfort. Compared with manual scrapers, auto-retractable scrapers typically risk causing hand strain as the user absorbs pressure in the thumb that keeps the blade extended. Slice solves this problem by introducing SureScrape™, a mechanism that reduces strain so users don’t have to choose between safety and comfort. As with all Slice safety ceramics, the 10593’s blade is oil and lubricant free, chemically inert, and never rusts. No PPE.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Fluo yellow/Grey and fluo yellow/navy. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
Functional jacket: • wind and waterproof • taped seams • good breathability • detachable hood with adjustable rubber cord • two chest pockets with zippers • two front pockets with zip • D-ring in left breast pocket for ID card • three inner pockets • adjustable cuffs. Quality: 100% polyester. Available sizes: XS-4XL. Available colors: Fluo yellow / black, fluo yellow / navy and fluo orange / black.
The SR 200 full face mask is made of silicone and is produced in one size that will fit most face sizes. The mask is equipped with three inhalation valves and two exhalation valves, and the breathing resistance is therefore very low. The exhalation valve covers with baffles effectively protect the valves and membranes against dust and paint mist. The design and location of the exhalation valves improve the scope available for communicating. The material and pigments of the mask body are FDA- and BGA approved for exposure to provisions, which minimizes the risk of contact allergies. The easily adjustable elastic head harness of the mask is secured to the visor frame and to the exhalation valves which, together with a large crown plate, contributes towards a comfortable and secure fit. The spherical visor of the mask is made of scratch-resistant polycarbonate, which provides a large field of vision. The mask can be used either as a filtering device in combination with filters from the Sundström range of filters, or as breathing apparatus with a continuous air flow together with the SR 307 compressed air attachment. The SR 200 can also be used as head top together with th e Sundström fan unit SR 500 or SR 700. Holder for pre-filter is included. The SR 200 full face masks together with the SR 500 EX fan are approved for use in a potentially explosive atmosphere. Best stored in box SR 344 alternatively storage case SR 339-1 or SR 339-2.
Flamirins is an isotonic solution for cleaning wounds. (250ml) Indications: Promotes wound healing by removing necrosis Cleans the w ound mechanically Moisturises the wound Neutralises disinfectants Removes adhered compresses Content: 250ml
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Hi-Vis T-Shirt with short sleeves and Cooldry yarns. This offers protection against the sun through a UPF50 +. Quality: 50% Polyester / 50% Polyester, Cooldry, 180 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: XS-7XL. Compliant with: EN 20-471 class 2.
