BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Forestry Pants 1SNA: zip fly; 2 inset zip pockets; 1 patch thigh pocket with flap; 1 patch smartphone pocket on the right leg with waterproof zipper; Ventilation zipper on the back leg; Elasticated waist with belt loops and loops for suspenders with velcro (ref. 5SD4); 3-needle stitching at the back. Available sizes: XS-2XL. Colors available: Grey/Black, Red/Black and Khakhi/Black. Complies with: EN 381-5 : 1995 Design A, Class 1, AS/NZS 4453.3:1997 Type 1 and ASNZS4453.3 Type 1.
Waterproof fully lined winter glove with soft, durable goat grain in the palm. The glove has touchscreen function on the back of the middle finger, pre-shaped fit and synthetic stretch material at back of hand. The cuff, which has a half<(>&<)>#02;length cut, is elastic at wrist to ensure that the glove stays firmly in place. Sizes: 6-13.
Flame retardant work jacket in Cantex Weld on the front and sleeves, and in Cantex Stretch on the back. Cantex Stretch gives the work jacket flexibility and offers freedom of movement and high comfort, while Cantex Weld at the front offers extra high protection against welding and grinding spatter. The work jacket has increased visibility. Concealed front zip with press studs. Extended back. Two walkie-talkie loops. Chest pockets with flaps, right with tool loops and concealed key ring for the ID card holder. Left vertical chest pocket with zipper. Spacious slit pockets with flap. Cuffs adjustable with press studs. inner pocket. Contrast stitching. Quality: Cantex Weld, 365 gsm. Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Foldable mask, class P3 for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic woven headbands. Masks packaged separately. This mask does not contian any components of latex rubber, or PVC. NPF: 50.
Sweater bicolor seams: Round neck, Sleeve cuffs, Dryer resistant, American fleece, Cotton/Polyester, Bi-colour, Bicolour, Sweaters, 60 °C, Construction, Pa inters <(>&<)> Plasterers, Transport <(>&<)> Logistics, Bicolour Seams, 60°C washable. Quality: 70% Cotton / 30% Polyester, 280 g/m². Available sizes: XS-8XL. Available colors: Navy/Royal Blue, Navy/Black, Black/Grey, Black/Orange, Black/Red and White/Black.
Anti-fog kit. Spray (30ml) + cloth. Suitable for all types of lenses (Except AR coated lenses).
High shoe in waterrepellent split leather. With an aluminium 200J toecap and a synthetic anti-perforation sole. Inner lining in breathable 3D polyester and insole in polyurethane foam. Sole in PU/PU. Sizes: 35-42.
Recirculation filter unit, suitable for all cabinet sizes of fire‑rated storage cabinets (S‑line, Q‑line, V‑line, UB‑line and XL‑line). Equipped with a colour display and signalling system to indicate filter saturation, operating status or fault messages. Fitted with a highly efficient broadband activated carbon filter, filtering and retaining 99.999% of hazardous substances from the processed air. Provides great flexibility in installation options: cabinet‑mounted, wall‑mounted or integrated into a housing. Supplied complete with a multi‑stage filtration system, secondary filter, connection cable and mains plug. ATEX compliant – CE EX II3/-G Ex ic nA IIB T4 Gc, ultra‑quiet operation: approx. 23 dB(A). Activated carbon filter 54‑1044 included, to be replaced annually.
Ultra-light and comfortable harness with webbing anchor points topstitched with high-quality Cordura®, with aluminum alloy automatic closures. Suitable to combine with life jacket Besto Offshore 300N (1057433) that can be attached to the harness by means of press studs. Comes in a handy carrying bag. After end of life or a fall, the harness can be returned to the manufacturer who recycles the harness to make carrying bags. Maximum user weight: 150kg.
Metal holder for attachment to wall and storage of one Barikos bottle.
Chin strap for Vulcan helmet.
The Xact-fit, with cord, adapt perfectly to the shape of the ear. The ergonomic shape guarantees optimum wearer comfort. Available in a disposable box containing 50 pairs, each pair in a carton minibox.
Jaune, comfortable gas goggles with large field of vision and frame in PVC. Fits perfectly over prescription glasses, gas-tight. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Charging cable for ACK081. Can be charged via an USB-port or connected to a FR08 (power supply). No PPE.
Safety helmet with micro peak and integrated arc visor, made of strong ABS for improved low temperature (-40°) and side impact protection. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
The JALNITRO from Jallatte is a low safety shoe with innovative anti-fatigue technology, ideal for professionals who stand or work for long hours in demanding environments. Sizes: 35-48 Compliant with: EN ISO 20345:2022
Light work jacket from the Progression collection, enhanced visibility EN17353.
Ledlenser Bluetooth 2x 21700 battery box for H7R Work/Signature, H15R Core/Work, H19R Core/Signature
Flexible adapting cut protection glove without coating, developed in collaboration with food companies. Ideal to put on under a disposable glove or chemically resistant glove. Oekotex and touch screen
Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.
Cut resistant gloves knit from Zirnium® thread, length 25 cm.
Refill for first aid panel: wound cleaning wipes (3227).
Compresses for very rapid first aid for burns in the acute burning phase. 20 x 20 cm. Three year shelf life.
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 300g.
Light (340 g) safety helmet made of polyethylene with medium-length peak (neither short nor normal length). Quality and comfort are guaranteed due to the improved, permanently attached 6-point textile suspension with slide adjustment (51-63 cm), fitted with a highly absorbent sweatband, made of 2 mm thick brushed nylon. The additional neck protection not only provides increased protection but also improves the aesthetic aspects of the helmet and the visibility. You can choose from silver, fluorescent yellow or fluorescent orange versions. Thanks to the innovative combi-slot (European 30 mm + English Connect slot), you can attach various hearing and face protection accessories. The helmet is delivered in a vented version, with plugs for the vent holes. This makes the helmet suitable for use during both the summer and winter. Suitable for: general industrial applications. Helmet shell colours: white, blue, yellow, red, hi-viz yellow, orange, green, grey, black, hi-viz orange IN COMBINATION with silver, hi-viz yellow, hi-viz orange neck protection.
Safety helmet made of ABS. With 4-points suspension 'Fas-trac' in textile (52-64cm), with a wheel and highly absorbent textile sweatband. Vented. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange, gray, black. Weight: 400g.
Fire resistant protection seal for breathing tubes BT. No PPE.
Waterproof PVC bag with small karabiner to attach to belt. Ideal for storing and transporting electro gloves. Dimensions: 450x180x70 (mm)
Goggle with mounted faceguard with a clear polycarbonate lens with 180° panoramic visual field. Anatomical shape and soft material allow close, yet comfortable fit. Fits comfortably over most prescription spectacles. Frosted top to reduce glare. High-quality, easily adjustable headband. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
The real remanent air-purifying spray. Natural and very powerful, for a fresh and clean atmosphere. Each spray dispenses 0.11 ml of solution and treats an area of 20m³. Also suitable for combating microbial particles in the air. Viruside test results available upon request. Use biocides safely. Always read the label and product information before use.
Suspension in plastic with ratchet for Peltor G2001 helmet.
System for attaching most types of chemical gloves to the garment sleeve through the use of 2 concentric rings. Very easy to attach your chemical gloves to the Chemmax coverall. 1 box contains 5 sets for 5 coveralls (10 black and 10 white rings). For use with CHEMMAX 1,2 and 3 coveralls. In line with EN 14605 Type 3 in combination with coveralls.
3M™ Solus™ 1000 is an adjustable safety spectacle. It has a Scotchgard anti-fog layer which protects longer than a normal anti-fog layer. Marking: 5C-3.1 1 FT KN.
Extremely good fingertip sensitivity, extra flexible, perfect fit and extremely light glove. Seamless knitted white nylon (13 gauge) Suitable for light applications in dry circomstances. Sizes: 6-11. In line with EN388: 2.1.2.X
Oval carabiner made of aluminium Manual closure of the locking mechanism. Opening: 20 mm. Resistance: 25 kN. Weight: 92g.
Softshell Shift with zipper, 1 chest pocket with zipper, 2 inset side pockets with press stud fastening, sleeves adjustable by. Velcro, adjustable waist by means of drawstring, D-ring, reflective piping on the front and back of the shoulders, inner pocket with velcro. Quality: 92% / 8% polyester / elastane, 320 gr / m2 Available sizes: S-3XL. Available colors: black / gray, gray / blue, gray / red, gray / fluorescent yellow, charcoal gray and white.
Flame retardant and antistatic safety vest with RWS reflection. Quality: 100% Polyamide, 200 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: XS / S - 5XL. Compliant with: EN ISO 14116, EN1149-5, EN ISO 20471: 2013 CLASS 2, RWS.
Anti-fog spray with microfiber wipes. You can use the Artnog 100 times and the anti-fog coating is retained for 20 hours. This can be used on glasses that also have an anti-reflection layer. No PPE.
Shirt with round neck, front and sleeves constructed with CUTEX®, back made of functional knitted fabric, increased protection of the forearms due to additional fencing fabric inside, Superfabric abrasion protection in the abdominal area and thumb hole. Available sizes: S-4XL. Available colour: yellow and black.
T-shirt bicolor with slanting seam on the chest. Quality: 50% Combed cotton / 50% Polyester, 190 g / m². Available sizes: XS-8XL. Available colors: navy / royal blue, royal blue / navy, gray / red, black / red, black / orange, black / lime, black / yellow and black / gray.
Functional jacket: • wind and waterproof • taped seams • good breathability • detachable hood with adjustable rubber cord • two chest pockets with zippers • two front pockets with zip • D-ring in left breast pocket for ID card • three inner pockets • adjustable cuffs. Quality: 100% polyester. Available sizes: XS-4XL. Available colors: Fluo yellow / black, fluo yellow / navy and fluo orange / black.
Sandal S1P in microfibre with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
Inherently flame-retardant metal-free switch pants. The pants have a zipper over the full length of the legs (outside) and are made of supple, wind- and water-resistant softshell material. Removable braces with fix-lock closure. Loops at the waist. Side pockets with flap. Front pocket with flap. Two-way zipper in the legs. With comfortable heat seal reflection. Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1+A2 B2 C2 F2, IEC 61482-2 APC 2 (ELIM: 40.0 cal/cm² EBT: 44.0 cal/cm²), EN 1149-5, EN 13034 type PB[6] and EN SO 20471 class 1.
ESD working glove compatible with touch screens. Seamless nylon / carbon. Without coating. Very comfortable. Sizes: 5-11.
Sponge sweatband for welding helmet G5-01. Packaged in sets of three. Not separately certified as PPE.
High shoe Glove in nubuck leather with aluminium toecap and a synthetic anti-perforation sole. Equipped with TPU heel reinforcement and scuffcap. Inner lining in breathable textile and insole in polyurethane foam. Sole in PU/Nitrile, resistant to 300°C. Sizes: 35-48.
Spectacle with light brown CBR23 PC lens with Supravision Excellence coating: anti-scratch (outside) and anti-fog (inside). Has ajustable side-arms and nose. Fits perfect onto the face. X-tended sideshield for increases side protection Color: black/white.
Low shoe in velours microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-50.
Protects against sulphur dioxide, acidic gasses and vapours. For use in combination with a half or full face mask with standard threads. Class 2 gas filter for maximum concentraiton of 0,5%.
Low shoe in microfiber, with a synthetic antiperforation sole and synthetic 200J toecap. Winch closing system. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SR antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-49. with: EN ISO 20345 S3S FO SR ESD.
Protective film to protect the visor of the powered air hood from dirt and scratches.
Knee protection for heavy work. The outer face reinforced with nylon provides protection against punctures. It resists cuts, tears a nd has a non-slip surface for better grip. One size fits all.
Dust mask, class P2, for harmful dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfort and better sealing. Exhalation valve for lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands with closure.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. Protection against organic vapour s < MAC value thanks to active carbon layer. NPF: 4.
Light, flexible banded earplugs made of a single piece, easy to wear around the neck. Caboflex is made of dimensionally stable plast ic and is perfectly washable and reusable. Excellent protection against universal noise.
Polycarbonate replacement visor, for the Iris II.
Face seal for 9100 AIR hoods.
Hose to connect Adflo motor unit to air hood. In heavy duty rubber.
Sweat band in synthetic leather for helmets Airwing and Pheos. Not certified seperatly as PPE.
Low shoe in microfiber/polyester (made from recycled PET bottles) with synthetic anti-perforation sole with a composite protective toe cap. Equipped with a bamboo and recycled polyester lining that is resistant to abrasion. Sole in PU/PU. Antibacterial Memory Foam sockliner. Sizes: 35-50 Conforms to: EN ISO 20345:2022 S3S CI FO SR.
Atex approved hand lamp with large magnetic switch that is easy to handle with gloves. Suitable for the highest gas and dust groups (IIC/IIIC). 3x alkaline AA batteries, belt clip and turning clip type G included.
The uvex 3 S3L low shoe provides excellent protection and comfort for demanding work environments. The shoe is designed for long-term use, with a breathable and durable construction to keep the feet dry and comfortable.
JALAMBER is a low safety shoe in the J-QUARTZ range from JALLATTE, with a shaft made of water-repellent grain leather, antistatic. a sole polyurethane J-Quartz equipped with the JAL'GRIP system (LG) and a safety nose made of composite Xetane B and perforation-resistant sole. EN ISO 20345:2022 From 35 to 48
Highly cut-resistant glove in very fine knit, 0.85 mm. 18 gauge. Soft nitrile coating. Touchscreen on all fingers. Reinforced thumb cavity. Sizes: 6-12 Complies with EN388: 4X43F
Designed from a 100% recycled polyester piqué mesh and a segmented RETHIOTEX® retroreflective transfer, the BALI long-sleeved T-shirt offers lightness, breathability, flexibility and elasticity. The perforated mesh under the arms allows maximum ventilation. Complies with: EN ISO 20471, EN 13758-2 UPF 40+.
Double Lanyard, 1.5 metre length, consisting of webbing strap with integrated shock absorber. Double Lanyard to allow continuous pro tection, even when switching between two anchor points. Fitted with a standard carabiner and two snap hooks with a 65 mm gate openin g. Serves as connection between anchor point and harness.
Rope ladder made of orange, UV resistant polypropylene with 16 mm diameter rope. Equipped with two eyes at the end for hanging. Rungs are 40 cm wide, 3 rungs per metre. These ladders are made to order. The ladder is supplied as standard without an inspection certificate. This can be offered as an option. Price available upon request.
