BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Parka with hidden zipper with hidden snaps, 2 front pockets with flap, 2 inset chest pockets with right chest pocket with D-ring for badge holder, detachable hood with drawstring, zip-in lining is available separately, escape mask loop, cuffs with Velcro, extended back, reflection band. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin binding + DWR, 280 gr / m2. Available sizes: S-3XL. Available colors: corn blue / navy, gray / blue, black / gray and gray / red. Complies with: EN 1149-5, EN 13034 type 6, EN 343 3: 2, IEC 61482 class 2, EN ISO 11611 class 1 and EN ISO 11612 A1A2.B1.C1.E2.F1.
High shoe in waterresistant, breathable Putek®, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a br eathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
Disinfectant spray for the skin. User instructions: Spray directly on the area to be treated, then dab using a compress. Repeat this process every 6 hours if necessary. Immediate effect. Composition: Aqua, chlorhexidine digluconate (Cas No. 18472-510) 0.2%.
Offshore work jacket Ramea with arc flash protection: Upright collar; Hidden popper fastening; 2 patched breast pockets with flaps; 2 patched side pockets with flaps; 2 loops for gas detectors; Sleeve narrowing by means of press studs; Extended back. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g / m². Available sizes: 44-64 EU. Available colors: Navy. Conforms to: IEC 61482-2: 2009 class 1 - ATPV 9.4 cal / cm², EN ISO 11612: 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116: 2015, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008 and EN 13034: type PB [6].
Full zip hoodie: • sweater and jacket at the same time • fur on the inside for extra warmth • hood with drawstring • large front pockets • knitted, elastic waistband at the bottom hem • reflective piping on the front and back Quality: 65% cotton, 35% polyester | inner side: 100% polyester, 430 g/m². Available sizes: XS-4XL. Available colors: Black, red, gray and navy.
Hi-vis polo with long sleeves, navy collar, 3 button placket, horizontal and vertical reflective tapes. Quality: 55% Cotton, 45% Polyester, Knit, 175g / m². Available sizes: S-3XL. Available colors: Fluo yellow / navy, Fluo orange / navy. Conforms to: EN ISO 20471 Class 2.
Kernmantel restraint lanyard 1.5m with a twist lock karbiner and a steel GO55 Scaffold hook. Only suitable for positioning.
SR500 motorunit to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Not for confined spaces. Flow rate: min. 175 or 240 L/min. Included: battery, battery charger, standard nylon belt, 2x P filters, 2x filter adapters, 2x pre-filter holders, 10 prefilters, flow meter, user instructions, cleaning wipe, plug kit.Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
Dark grey hearing protector with HiViz red element for attachment to helmet, made of combination of plastic and stainless steel. Very light model with ergonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
Banded earplugs, lightweight and reusables, ideal for visitors. In line: EN 352-2 (SNR23).
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask, with new improved exhalation valve. Protects against organic gases and vapours with a boiling point >65 °C, plus harmful dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. Sizes: universal. NPF: dependent on the filter used.
Lanyard, 2 metre length, consisting of elastic strap with integrated shock absorber. Fitted with one standard carabiner and one with big opening. Maximum user weight: 140kg
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: H2S with alarms at 10PPM and 15PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
This glove offers excellent grip in dry, wet, and lightly oily environments. The single nitrile foam coating on the palm makes the g love soft and comfortable while still providing a secure grip. Cut protection level C and reinforcement between the thumb and index finger. Knitted 18 gg lining with cut-resistant CRF® technology and partially recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016+A1:2018: 4.X.4.3.C
Boot in waterresistant oiled leather, with an steel antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner. Outsole in PU/PU, SRC antislip. Sizes: 35-49.
Low shoe in SAFETY KNIT textile with FUSETEC elements, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 39-48.
The CrossForce Flex is equipped with the smart Fast Lock System. A safe and easy-to-use alternative to traditional laces, it can be operated with one hand. A smart system that allows you to quickly put on and take off your safety shoes and prevents you from tripping over laces. Discover how safety and sustainability go hand in hand. Extremely safe without the use of metal and made with partially recycled content. This lightweight, flexible and dynamic shoe has a 3M reflective strip on the instep and heel. With the innovative Framework PU outsole and NANO carbon toe cap, it ensures better performance and a safer feeling.
This low safety shoe is metal-free, sporty, lightweight and dynamic. The ingeniously designed tongue keeps moisture and dirt out. Are you on your feet all day long? Experience optimal comfort and ultimate grip thanks to the use of nubuck leather, a soft insole with comfortable PU foam and the Framework PU outsole. This S3S safety shoe is ideal for people who work outdoors.
The first disposable glove resistant to acetone for at least 15 minutes. This glove features an innovative multi-layer design with Type A chemical resistance. Enhanced mechanical protection. The striking orange color improves visibility. Sizes: 6,5-7 to 9,5-10 length: 285mm, thickness: 0.50mm Compliant: EN388: 2110A EN374 TYPA A: JKLOAPST VIRUS EN421
Comfortable and lightweight plastic safety glasses with patented adjustable nose bridge, of which the nose bridge can be put in 3 po sitions in order to achieve the best possible fit.
Hi-vis shell jacket 4680, class 3. Concept: Trofta
Super-light (300 g) safety helmet with short peak, made of strong ABS. With 6-point textile suspension (1000276) (51-63 cm), highly absorbent hydro-flock sweatband (1000299) and standard 4-point chin strap (1034406). Specially designed to prevent injury if helmet becomes trapped during a fall: chin strap opens automatically. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm Connect slot for attachment of hearing and face protection.
Safety helmet made of polyethylene with 6-point textile suspension (51-63 cm) and black nylon sweatband, without ventilation. With European 30 mm slot for attachment of hearing and face protection.
Low-cut, black safety shoe in full grain leather with steel toecap and antiperforation midsole, scuffcap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight duocomfort (PU/Nitrile) outsole, with heel profile, high wear resistance, antistatic, slipresistant, resistant to oil, petrol and acid, high shock absorbency. Sizes: : 37-49 (D, XD).
These reusable & detectable earplugs are an ideal alternative to otoplastics for personnel who are only temporarily exposed to noise or for temporary personnel who work under noisy conditions. The Comfoor Parttime includes a unique filter that filters out all the harmful noises, without completely blocking the ear. As a result, conversations and sounds from the surroundings remain audible and there is no sense of vertigo. It is made of skin-friendly, durable silicone material that easily conforms to the ear. The result is a good seal and superb wearing comfort. Thanks to the unique design and special grip, the Comfoor Parttime is easy to place in the ear and to remove. Can be optionally fitted with a cord with clothing clip. Available in: blue. (SNR 24 dB).
The choice of professionals: maximum protection for arc welding. Ideal in shipbuilding and construction sectors, folding glass holder size 50x108mm. Weight: 521gr. Easy adjustable headband, perfect comfort, leather chincup available. Supplied with welding glass DIN 10.
Cable locking system + metal cable with vinyl coating (2.44 m). Not PPE.
This 0.63mm thick knife is very suitable for cutting different materials. The ergonomic support in aluminium makes the knife very stable and is suitable for left and right handed ones. Very handy slider for using the knife while wearing safety gloves! Spare blades: 1024827
Fully nitrile coated glove. Flexible and close-knit glove for excellent grip in wet and oily conditions. Unique: Also checked for food contact. Available in sizes: 7, 8, 9, 10 and 11.
This practical bracket permits mounting of the USED BLADE CONTAINER No. 9810 on piping, tubular supports, posts or walls (just attach the BLUE plate!). IMPORTANT NOTE: This bracket can only be used with the Model WITHOUT the lateral notches! No PPE.
Trousers, MR - 65% cotton 35% polyester, canvas, 320 gr/m², zipper, 2 front pockets, 2 loose hanging pockets, 2 back pockets with press-stud, ruler pocket, thigh pocket, handy pocket, Cordura® knee pockets, belt, Cordura® reinforcements, reflective piping. No PPE.
For maintenance and repair of electrical installations. In siliconised calf leather (palm). 100% Kevlar® tricot interlock (back). Protection against thermal and mechanical hazards. Tested with 7kA / 0.5 s ARC test
Kneepads, polyethylene foam, extremely low weight, comfortable to wear, flexible.
Reusable cold / hot pack. Helps with sprains, muscle tears, bruises and headaches etc. The cold / hot pack cannot be placed directly on the skin when used due to use. Freezing or burning symptoms (use the supplied Velcro bandage for this).
Raincoat, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zip under storm flap with press stud fastening, sleeves with press stud fastening, 2 straight pockets. Complies with: EN 343.
Lined finger-sensitive nitrile cap gloves with a grip coating according to the new Grip Technology. Very good physical properties and good grip even in oily and damp/wet conditions. Top finished with straight edging. Sizes: 8 / 9 / 10, Length: 280 mm.
Manually retractable cutter in the form of a pen with replaceable ceramic blades. Rubber holder Double sided ceramic knife is specially designed to stay sharper and cause fewer accidents. Stays sharp for up to 10x longer than normal replacement blades. Orange version. Knife can be blocked. No PPE.
Classic goggles with appropriate fit for each face. Lens in gray polycarbonate: like all uvex PC lenses offer the gray tinted lenses 100% protection against harmful UV radiation to 400 nanometers. The gray tint filter parts of the visible spectrum and it offers protection against intense glare of sunlight among others. The color signal recognition of color remains unhindered. Protects against reflections and optical irritations outdoors (e. g. water surfaces) for greater visual comfort. With anti-scratch coating coating.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1 metre. Anchor point for protection of one person.
Ceramic Pen and Box Cutter replacement blade • Blade lasts 10 times longer than a steel blade. • Snaps into the knife holder quickly and safely. • Fewer fractures. • The knife has 4 rounded cutting sides. • Cutting side has a length of 34 mm. • Very strong and cannot rust • Packs of 4
P3 filter with thread connection EN148-1 in ABS housing.
Bodytrousers in 65% cotton/35% polyester (290g/m²). Covered zipper with press-studs, 2 side pockets, 2 side slits, breast pocket with flap, pen pocket, handy pocket, back pocket with flap, ruler pocket with flexible steel ruler pocket, knee pockets, elasticated back and elasticated shoulders. Available sizes: 46-64. Available colours: navy, Cornflower blue.
Low shoe in white synthetic material, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
Plastic box for moldex full face mask. Dimensions: 29x19x27,5cm
100% acrylic beanie soft touch with lapels. Thinsulate ™ lining. Available sizes: Universal. Available colors: Navy, black and gray.
Fleece jacket in high vis: • spacious front pockets with zip • inside pockets • thumb grip on the cuffs • YKK zipper in the front Quality: 100% polyester. Available sizes: S-4XL. Available colors: Hi-Vis yellow / black and hi-vis orange / black .. In accordance with: EN ISO 20471 class 3.
Made from an inherently flame-retardant, breathable and supple fabric, harmless to the skin, this jacket offers excellent arc protection, and protection against heat and metal splashes. It is equipped with double-stitched reflective FR strips for increased visibility. The tailored jacket is anti-static and resistant to wear, shrink and pilling, even after frequent washing. Quality: 57% aramid + 42% polyester + 1% AST; ± 260 g/m². Available sizes: 44-64 EU. Available colours: Fluo orange/navy.
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. BOA closing system. Fitted w ith a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-48.
Welding vest FR08: Protects against radiant, convection and contact heat; 100% Metal Free; Industrial wash at 75°C and machine dry 155°C; Flame Retardant Industrial Washable Striping; antistatic; Extended back for more protection; Radio loops for easy attachment of a radio; Velcro adjustable cuffs for a snug fit. Quality: Bizflame Ultra: 80% Cotton, 19% Polyester, 1% Carbon Fiber 340g. Available colours: Gray and Royal Blue. Available sizes: S-3XL. In accordance with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 1 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 Class 1, EN 13034 Type PB [6] and ASTM F1959/F1959M-12 ATPV 16 CAL/CM2 (HAF 83.7%).
Baseball bumpcap in nylon, frame in EVA and shell in ABS. Fitted with ventilation wholes and velcro strap at the rear of the head.
This Safety vest provides extra comfort for the wearer through a zipper. Please note: the size combination XS-S is certified according to EN ISO 20471: 2013, Class 1. The safety vest has a stitched striping. Quality: 100% polyester, Warp knit, 120 g / m². Available colors: Fluo Orange and Fluo yellow. Sizes: XS / S - 5XL. Conform: The Rijkswaterstaat guidelines are applied, just like the EN ISO 20471: 2013 / Class 2 standard for High Visibility.
Welding helmet shell 100-QR, without Quick Release Rail, without welding filter, without safety helmet.
Low shoe in waterrepellant microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in polyester. Outsole in EVA/Rubber, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Exterior: Stand-up collar, concealed snap button closure under facing 2 patch chest pockets with flaps with hidden press studs, 2 patch side pockets with flaps with hidden press studs, 2 loops for gas detectors, round sleeves, sleeve narrowing by means of a button. press studs, flame retardant reflective tape (50 mm). Inside: 1 inner pocket, identification label. Material: Sio-Safe Essential Eco: 50% cotton + 30% Tencel = 19% recycled polyester + 1% AST. +- 320 g/m. Complies with: EN 61482-2 ELIM 9.7 cal/cm² - ATPV 11 cal/cm², EN ISO 11612 A1 A2 B1 C1 E3 F1, EN ISO 11611 Class 1 A1 A2, EN 1149-5, EN 13034 (Type PB 6), EN 17353, EN ISO 13688. Available colours: navy-fluo yellow Available sizes: 44 - 64
Butyl rubber glove against very aggressive chemicals. Improved ergonomics and increased flexibility through a unique butyl formula that feels soft and maximizes flexibility and dexterity. A reinforced grip due to a raised diamond pattern. Length 35 cm, thickness 0.35 mm. According to EN 374-1:3016 TYPE A - ABCIKMPST and 374-5:2016
Green plastic hearing protector with neck band made of combination of plastic and stainless steel. Allows simultaneous use of helmet s or other head wear. Universal size.
Made from durable polyethylene. Certified according to the latest IMO and SOLAS standards. Diameter 75 cm, Weight 4.5 kg. Cord 30m available (art. 1032349).
High shoe in black textile composed of high tenacity polyamide. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in EVA/VIBRAM. Sizes: 35-50.
Compact professional headlamp with adjustable light suitable for explosive environments. Rechargeable battery is worn on the back of the head for ergonmic weight distribution. Battery can also be attached to clothing or equipment with an extension cable. Lamp is resistant to dust and water: IP68. Equipped with emergency lighting if the battery should run down during work. Charging time: 210 minutes. Very suitable as a mine light.
Comfortable half mask in rubber with double perfectly adaptable strap. Covers the nose, mouth and chin. Maximal confort because of two exhalation valves that keep the exhalation resistance low. With threaded connection EN 148 for screw-on filters.With quir adjustable strap and magnetic buckle on the neck strap. Not for filters > 300g. NPF: dependent on the filter used.
High shoe in microfiber/polyester (made from recycled PET bottles) with synthetic anti-perforation sole with a composite protective toe cap. Equipped with a bamboo and recycled polyester lining that is resistant to abrasion. Sole in PU/PU. Antibacterial Memory Foam sockliner. Sizes: 35-50 Conforms to: EN ISO 20345:2022 S3S CI FO SR.
High shoe S3 in waterresistant black full grain leather with uvex waterstop technology for protection against splashing water and 200J synthetic toe cap and steel antiperforation sole. Innovative uvex bionom x design creates a biomechanical symbiosis between the foot, the upper, the sole and the floor. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU (i-PUREnrj) with strong antislip values and very good shockabsorption. Free of phthalates and silicones. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 38-52.
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (52-63 cm) and highly absorbent hydro-flock sw eatband. With extended neck protection and indirect ventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Colours: white, yellow, blue, red, green, orange.
Lanyard, 1.5 metre length, consisting of webbing strap with integrated shock absorber. Fitted with two standard carabiners. Serves a s connection between anchor point and harness.
The Com4-fit, with cord, has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate bag. Colours: orange.
Prairie sole inserts are made of leather with a felt layer. They are breathable, mildew resistant and do not conduct heat or cold. S izes: 36-47.
Absorption pads available to order in sets of 4, diameter 7.6 cm x 366 cm, 100% polypropylene. Chemically inert, green captioned sorbent, absorbs 16 times its weight in chemicals, water, or oil, absorption capacity 45 liters, weight 5.4 kg. Suitable for absorbing hazardous liquids and can be applied to a wide range of chemicals including hydrofluoric acid. Easy to contain larger contaminations.
Mini cable locking system - nylon cable The mini-cable locking system with nylon cable is also suitable for locking interrupters. Not PPE.
