BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Dust filter protects against all types of particles (highly toxic dust, mist and smoke particles) Can be used in combination with the Sundström motor units SR500/SR500EX/SR700. Cannot be combined with a gas filter.
3M™ Versaflo™ BT-63 Length Adjusting Breathing Tube is designed to be used with 3M™ Full Facepiece Respirators 7907 S Series, 6000 Series, and half face masks 7500 Series and the 3M™ Versaflo™ Powered Air Purifying Respirator TR-600 and TR-800.
AE1HGP3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C ,sulfur dioxide and hydrogen chloride, mercury and toxic dust, vapour and smoke particles.
3-layer gray bonded and perforated medium-weight universal absorbent pad. Durable top and bottom layers provide extra strength and a longer lifespan. Lint-free, soft, and supple. Dimensions: 41x51cm, absorption capacity: 84L.
Lightweight breathing hood made of WEB 24 with PE visor. Hood with double neck and shoulder protection so the inner hood can be tucked inside the clothing. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 310 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.
Eye-catching, signal red galvanised 34L bin. Used for cleaning pads, sponges and other waste that is saturated with flammable and/or environmentally harmful liquids. The waste container has a self-closing lid operated by a foot pedal or manually. The bottom edge has ventilation openings to prevent self-ignition caused by heat build-up.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. Alarm values HCN: 1,0-4,7ppm.
Long reacht davit arm with a range of 70cm to 113cm high capacity. Short and long reach davit arm high capacity can only have 1 davit mast extension. Complete davit (mast extension + davit arm) can be used on any fixed or portable davit base high capacity. Authorised SRL and winch can be mounted front or back whether on the universal lower mast or davit mas extension. Can be used for persons as well as loads with a maximum of 205 kg with portable bases, or 340 kg with fixed bases. For fall arrest applications: 2 users (max 140kg max each), for rescue applications: 1 user (max 140 kg max.).
Navy blue disposable nitrile glove. Powder-free and accelerator-free. Ambidextrous, with roughened fingertips. Designed for use in l aboratories and research environments.
This ready-to-use kit includes a PF-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1235E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger. Compatible with 3M filters DT-Series.
Test liquid for performing fit test. Content: 55 ml.
Set for performing a personal fit test for dust masks. Set contains test liquid, sprayer and hood. Test person puts on dust mask and hood, then the test liquid is sprayed inside the hood. If the wearer can taste the test liquid, the mask has not been fitted proper ly or the mask does not seal sufficiently for that person. Test can also be performed without hood.
P1 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
Adapter for mounting sealed block on davit arm.
P filter for TR-600/TR-800 motor unit. Protects against highly toxic dust, mist, smoke particles and irritating odours. Clogging of filter only be detected through an increase in the (breathing) resistance, motor unit will then sound an alarm.
Navy blue disposable nitrile glove. Powder-free and accelerator-free. Ambidextrous, with roughened fingertips. Designed for use in l aboratories and research environments. Version with long cuff.
Lightweight breathing hood made of WEB 22 with PC visor. WEB 22 material captures particles, preventing the particles on the wearer from getting onto the work piece. Hood with double neck and shoulder protection so the inner hood can be tucked inside the clothing. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For spray painting applications, special raw material of hood and visor can be cleaned with thinner. Weight: 315 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.
Hand soap for a deeper hygiene of 99.9% against the most common bacteria. Biodegradable formula with ECOLABEL. Dispenser: 1060725
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Inside of mask equipped with comfort pad for better sealing. Equipped with individually adjustable, elastic head bands. NPF: 50. Planet version, manufactured from 26.5% recycled material.
The easiest single-gas detector for Ozone to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Bitter test liquid for performing fit test. Content: 55 ml.
P3 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist, ozon and smoke particles.
The 3M ™ Versaflo ™ BT-64 Breathing Hose is a heavier and more robust breathing hose with a fixed length to use for heavy work. This BT-64 Breathing Tube connects approved 3M close-fitting facepieces to 3M motor-powered systems to ensure clean air reaches the facepieces with unrestricted airflow. The breathing tube is supplied with the 3M ™ TR-973 Air Flow Indicator. The BT-953 cleaning and storage kit can be ordered separately. For use with 6000 and 7907S series full face masks, and 7500 series half masks in combination with the Versaflo TR-600 and TR-800.
Comfortable half mask in TPE with replaceable A1P3filters . Sizes: S/M and M/L.
Harness to carry fan units SR500 EX on the back. No PPE.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. No PPE.
This ready-to-use kit includes a PF-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1135E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger.
Kit with SR 500 EX fan unit and face shield SR 570 with triacetate (TAC) visor. Contains, SR 500 EX fan unit, SR 570 face shield, battery SR 502 EX, battery charger EX, PVC belt, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 pre-filter, 2 pcs pre-filter holder, flow meter, plug kit, cleaning wipe and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Combination filter class 1 for use with Sundström half and full face masks. Provides protection against organic gases and vapors, with boiling point > +65 °C, inorganic gases and vapors, acid gases and vapors such as sulfur dioxide and hydrogen fluoride, ammonia and ammonia vapours, mercury vapors and dust particles, fog and smoke.
Very light and compact mask. The cartridges are profiled to give a perfect field of vision. Featuring a quick release harness with a djustment points for optimal comfort. The inner half-mask has 2 inhalation valves to prevent fogging. Mask comes with 2 ABEK1P3 filters that can be replaced.
New Multi charging station for 3 batteries, high capacity, as accessory for motor unit Versaflo TR-300. Without power supply.
Eye-catching, signal red galvanised 80L bin. Used for cleaning pads, sponges and other waste that is saturated with flammable and/or environmentally harmful liquids. The waste container has a self-closing lid operated by a foot pedal or manually. The bottom edge has ventilation openings to prevent self-ignition caused by heat build-up.
Very robust fall-prevention device with winch, 15 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on davit arm via adapter. For 1 person, max. 150 kg. Weight: 15 kg.
Winch for descents or rescue. To be used in combination with AM100 tripod. Galvanised cable. Best used in combination with suspension harness. To be used in confined spaces.
Descending and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably to be used with seat harnesses. Ideal for enclosed spaces.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. Alarm values: 1,6 - 3,2ppm.
Floor base for davit arm with boom. For permanent attachment to concrete or a metal construction. Opening for davit fitted with hard PVC sleeve to allow davit arm to pivot more smoothly. W 30,48 x L 30,48 x H 24.1 cm. Other floor bases or a mobile base for the davit arm are available on request.
Kit with SR 500 EX fan unit and protective helmet SR 580. Contains, SR 500 EX fan unit, SR 580 protective helmet, battery SR 501 EX, battery charger SR 513 EX, belt SR 508 EX, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 pre-filter, 2 pcs pre-filter holder, flow meter, plug kit, cleaning wipe and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Charger as accessory for motor unit Clean air Chemical.
Very light and compact mask. The cartridges are profiled to give a perfect field of vision. Featuring a quick release harness with a djustment points for optimal comfort. The inner half-mask has 2 inhalation valves to prevent fogging. Mask comes with 2 A2P3 filters that can be replaced.
Robust mulitgas detector with built-in pump for vrijgage confined spaces. Designed for harsh environments with a 95dB audible alarm. Detects simultaneously: %LEL, H2S, O2 and CO. Battery autonomy: up to 50h. With catalytic low power (fltered) LEL sensor. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST.
Wall mounted eye shower with two 45° angled heads, incl. 1.5m inlet hose. Trigger operated including a built-in check valve and FLOWFIX for regulation of water flow (14 l/min). Min. working pressure: 1,5 bar.
Neutral detergent, also suitable for the food sector. Dispenser: 1060646
Intrinsically safe (Ex-proof) Li-ion battery 18V,3.0 Ah for SR 500 EX motor unit.
Gas detector reusable multigas detects %LEL, H2S, O2 and CO simultaneously. Including batteries and induction charger. Equipped with NFC and a large display that clearly shows information. Correction factors can be set with the WatchGas SST Range app. The device is robust and is equipped with stable sensors that remain reliable under extreme temperatures and conditions. Can be calibrated every six months. Alarm values low and high: O2 19.5%-23.5%, CO 35-200PPM LEL 10%-20%, H2S 10-15PPM. Equipped with an unfiltered LEL sensor.Alarm settings can be set to the user's preference with the SST Docking Station (1062077) and the Watchgas app.
Single gas gas detector easy to operate with 1 button. Equipped with NFC, making the device easy to connect to the free Watchgas app, and therefore easy to manage. Equipped with reliable and stable sensors, developed according to the latest technology. Display shows real-time values. Alarm values can be set by connecting to the app, or by using the docking station. Battery and sensors can be replaced.
Super light glasses (19g) made of clear polycarbonate. Thanks to an innovative new production technology, the uvex pure-fit can be made entirely from just one material. It is made entirely of polycarbonate and is therefore 100% recyclable — just like the product packaging. This makes the uvex pure-fit an extremely durable solution. The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Navy blue disposable nitrile glove. Powder-free and latex-free. Ambidextrous, with roughened fingertips. Designed for use in laborat ories and research environments. Content size XL: 170 pieces.
Table mounted eye shower with two 45° angled heads, incl. 1.5m inlet hose. Trigger operated including a built-in check valve and FLOWFIX for regulation of water flow (14 l/min). Min. working pressure: 1,5 bar.
White/transparant safety goggles with adjustable silicone headband. With clear polycarbonate lenses covered with an antifog and supravision CR coating. Offers an excellent panoramic field of view. Band contains silicone. This CR model has been manufactured for repeated autoclavable sterilisation (up to 10 times). Perfect for use in clinics, laboratory, cleanrooms and food manufacturing.
Very soft, moisturizing, mildly perfumed hand soap. Hypoallergenic for sensitive skin. Biodegradable formula with ECOLABEL. Dispenser: 1060725
Robust mulitgas detector with built-in pump for vrijgage confined spaces. Designed for harsh environments with a 95dB audible alarm. Detects simultaneously: %LEL, H2S, O2 and CO. Battery autonomy: up to 18h. With catalytic (unfltered) LEL sensor. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST.
P3 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.
P3 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles. The new IonicAir filter technology reduces breathing resistance by 30%.
Powder-free and latex-free nitrile disposable glove, accelerator-free to reduce the risk of type IV allergies. Non-slip textured surface. Food approved. Thickness: 0.11 mm – Length: 240 mm Sizes: 7 (S) – 11 (XXL) Packaging: 100 pcs/dispenser box. Sizes 10–11: 90 pcs/dispenser box Complies with EN 455‑1/2/3/4 for non-reusable medical gloves. Conformity: EN 374 – TYPE B: JKT – VIRUS – EN 421
Davit arm with boom. Davitarm and base system includes adjustable upper mast, lightweight lower mast and 3-piece lightweight base. Includes mounting bracket for a winch. Order winch and SRL separately. Boom has a universal anchor point for fall-blocks or safety line. In combination with the adapters, fall-protection blocks with or without winch or permanent winches, can also be mounted to the davit. Boom has two roller wheels to guide cable of fall-protection block or winch. The boom is extendible in different positions. Height with boom: max. 2542 mm.
Spare hood for the 3M fittest kit FT10 or FT30. No PPE.
