BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
95 impregnated wipes of 15x15cm, cleaning and disinfecting. Bactericidal and fungicidal. Disinfect after 5 seconds of contact time. The tissues do not dry out in the packaging. Use biocides safely. Always read the label and product information before use. BE-REG-01578
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 300g.
Powerful rechargeable LED head and flashlight, with a maximum output of 2700 lumens, making them extremely suitable for use in industry. the lamp can also be used hands-free, by means of a metal pocket clip. There is also a built-in magnet on the back to secure them to a metal surface. The lamp can be rotated 180° to easily set the desired angle. Easy to operate, even with gloves. Comes with micro USB cable to charge the 21700 Li-Ion battery at 4000 mAh, battery holder, lamp holder, headband, spare O-ring, pocket clip and a lanyard. Can also be charged with 2 CR123A batteries.
High ranger shoe in waterproof leather with metal toecap and metal anti-perforation sole. PU / PU sole, with added PU raised toecap. Fully padded water-tongue. Contains a Gore-Tex membrane. With chainsaw protection class 2. Sizes: 38-48.
Tripod with tubular aluminium legs for lowest possible weight. Four eye bolts in the head that can be used as anchor points. Tripod is adjustable from 1.35 to 2.35 metres. Tripod is meant for two people, with a total weight of 500 kg. To be used in combination with winch and rescue set Rollgliss or SRL Weight 14.5 kg. Without carrying bag: 1003772.
Firefighter boot with chainsaw protection (class 2) in black water and firerepellant PBI fabric and microfiber, with a synthetic ant iperforation sole and composite 200J toecap. Reflectors on both sides, AN ankle protection. Fitted with a Crosstech liner. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on front and back in PBI. Specially designed BOA closing system. Sizes: 35-50.
Overboot in ultra chemical resistant and antistatic material (Hazmax). Outsole in vulcanized rubber, with a perfect slip resistance, oilresistant and heatresistant up to 300°C. Forseen with a heel part, excellent for climbing ladders. Fixing by rubber strap for a perfect fit, wide shaft for ease entry and fitting.
The STRATO VENT helmet is lightweight, comfortable, and secure thanks to the CENTERFIT and FLIP&FIT systems. Its adjustable chinstrap and ventilation openings make it suitable for both work at height and on the ground. Fully modular, it can be equipped with accessories such as a headlamp or hearing protection. The high-visibility version ensures optimal visibility, both day and night.
Firefighter boot in black water and firerepellant PBI fabric and microfiber, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection. Fitted with a Crosstech liner. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on front and back in PBI. Specially designed BOA closing system. Sizes: 35-50.
Traffic cone made of polyvinyl chloride, fluorescent orange and reflective white. Height 30 cm, reflective white band around circumf erence, black non-slip base, highly visible during the day due to fluorescent orange colour and at night due to reflective propertie s.
Trafic Rescue Helmet; It can be esuipped with with hearing protection and clear visor. It can also be fitted with high performance XP-lamp and SCBA mask for rescue in toxic and dusty environments.
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Gore- Tex. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Pull straps in leather Sizes: 38-48.
Compressed air device that supplies environmentally-independent air and overpressure to the full-face mask. Apparatus for work situations or interventions. Ergonomic basic backplate with shoulder and hip straps with shock absorbing lining and plastic buckles. Includes pressure reducer, pressure gauge, warning whistle to indicate low air, and cylinder connection. Thanks to unique hose technology, 3 functions are combined in 1 hose: pressure gauge, 2 connectors for lung demande valve and whistle signal (single line). To be combined with steel or composite air cylinder 6L(6.8L)/300BAR, regulator M1 and corresponding 3S Maxx or G1 Maxx masks not included. Working time: approx. 45 minutes. NPF: 50 ,000.
Corresponding dispenser(s): 1054720 or 1060911.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. Protection against organic vapour s < MAC value thanks to active carbon layer. NPF: 4.
Compressed air bottle in composite 6.8l/300bar with tap. Content 2040L breathing air. Can be mounted on all compressed air, except the BD mini. Can also be mounted on small compressed air carriage. Weight: 4.2kg. Supplied unfilled and with test certificate. Recertification required every five years. Service life 15 years. Equipped with outflow safeguard.
Self-adhesive waterproof high-visibility tag with personal info. Statement: In Case or Emergency. You stick this ticket on your helmet after you have entered all of your important personal information. This would include your name, address, companies who should be contacted in the event of an accident. It could also include any allergies, diseases such as diabetes etc. In short, anything that could be of interest to the first responders in order to identify you.
Motor unit Clean Air for suit RJS, including battery, hose, and belt. Filters and battery charger to be ordered separately.
Flame retardant boxer short. Quality: Merino RX, 200 g / m². Available colors: Black. Available sizes: XXS-4XL. Compliant with: EN ISO 14116: INDEX 3, EN 1149-5.
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Offers protection against contact heat of 100°C during 37 seconds, and 250°C during 12 seconds. Sizes: 8,9,10.
Lamp for attachment to the helmet F1SF by MSA. The lamp has extremely powerful LED technology. Completely waterproof. Equipped with an ergonomic switch. The XP helmet lamp is photoluminescent, so they can be recognized easily in the dark. Comes with 4 AA batteries.
Synthetic wipes, soaked in disinfectant liquid. Handy wipes for cleaning full and half-face masks. Wipes are individually packaged.
This transparent mask for mouth-to-mouth resuscitation allows a goodviewof the victim. Packed in a hard box.
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
Isotec S5 safety boot in ultra chemical resistant and flame resistant material with steel toecap and steel antiperforation sole. Removable, washable insole. Vulcanised rubber sole, oil resistant, non-slip and heat resistant up to 300°C (contact heat). With shock absorbent tunnel system in the heel. Colour: green. Available: 35-50.
Soap- and alkaline-free liquid for responsible cleaning of rubber masks, medical equipment, parts of compressed air equipment, prote ctive clothing, etc. Clean is a slightly viscous mixture of anionic surfactants, corrosion protectors, inhibitors, additives and fix atives, water and NaOH, with a pH value of 7. Completely biodegradable, non-flammable and does not irritate skin or mucous membranes . Use a 0.5-1% or 1%-3% solution, depending on the materials to be cleaned. For manual cleaning.
Firefighter jacket Tiger Plus Elite with NOMEX® COMFORT GRID, 200 gr / m², SOFIDRY: ▪ High in 1 piece upright closing collar with wide closure. ▪ Shoulder pads with internal 3D thermal reinforcements and external silicone coated Kevlar® reinforcements. ▪ YKK anti-panic crystal closure with a waterproof flap and velcro closure. ▪ Pockets: o Radio pocket and 1 flashlight holder. o Napoleon pocket + pen holder in the side of the jacket. o 2 patched outer pockets with slanted flap with flap. o Equipped with D-rings for glove attachment. o Knitted aramid cuffs. o Various microphone loops. o All pockets with pull loops. ▪ Pre-formed 3D sleeves with insert. ▪ Unique protectors on the pressure points made in 3D and with RHTI24> 40sec! ▪ Equipped with external elbow protection and reinforced sleeve ends. ▪ The underside of the jacket is provided with an anti-absorbent layer for perfect watertightness. ▪ Extended back for better protection.
Premium fire blanket specially developed for controlling battery fires. The fire is smothered immediately after the fire blanket is placed over the burning vehicle/battery. In the event of a battery fire, the battery will continue to burn, albeit in a controlled manner, resulting in less smoke and heat production. The Premium blanket can be used multiple times and is equipped with 120cm long loops to easily hoist the blanker over the burning vehicle. Comes in a transport bag. Constant temperature resistance utp to 1000°C (short tem up to 1300°C)
Flame retardant and antistatic long underpants for women in 60% merino wool/38% Lyocell/2% polyester. Cool and comfortable material, regulates body temperature elastic waistband. Available sizes: XS-2XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Reliable and easy to use single gas detector. It works maintenance free for up to two years, just switch it on and it works continuously - no need to charge the battery or even replace the sensors. That means great reliability and no downtime.
Flexible, chemically resistant PU sealing mat. Tightly seals off draingrates and prevents spilled liquids from draining away. As long as it iscleaned with a non-aggressive detergent, this mat is reusable. Dimensions: 50 x 50 cm. Suitable for sewers with dimensions 30x30cm. Comes in a handy storage box.
Fire blanket specially developed for controlling battery fires. The fire is smothered immediately after the fire blanket is placed over the burning vehicle/battery. In the event of a battery fire, the battery will continue to burn, albeit in a controlled manner, resulting in less smoke and heat production. Also suitable for limiting a spontaneous battery fire during charging. Transport bag included. Dimensions: 250x300cm.
Pulley with carabiner to attach to tripod for cable of winch or fall arrest block.
Reusable multi-gas detector detects %LEL, H2S, O2 and CO simultaneously. Semi-annual calibration required. Battery autonomy: approx. 48u. With catalytic filtered LEL sensor are calibrated to methane by default. Suitable for very many applications, but less suitable for heavier compounds (C5 and above), not suitable for inert applications. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST..
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Suitable for work in ATEX environments only in combination with Hazmax ESD boots. Sizes: S - XXL.
Mandown alarm in the form of a compact GSM device. Supplied with charger, USB adapter, USB cable and clip for wearing on your belt. Provides automatic alarm via SMS or call to max. 10 pre-programmed telephone numbers. Alarm is activated by a lack of movement or absence of movement through a specific angle (horizontal or vertical). Alarm can also be activated manually via a separate button. Always gives an initial alarm that can be overridden in order to avoid false alarms. Once alarm calls have been processed, there is a signal of 110 dB which allows the person to be located. Works on basis of SIM card. Initial configuration and all settings can be amended via free software downloaded from www.twigcom.com. With GPS location option that can send a Google Maps link via SMS (works best outside buildings).
Disinfectant fluid for responsible cleaning of rubber masks, medical equipment and plastic or metal parts. Disinfect for 15 minutes with a 1% solution of this product. Desinfecto kills bacteria and mildew, deactivates viruses, is non-flammable and biodegradable. B ottle containing 1 litres, pH value 6.7.
Fluid barrier that dams or directs spilt liquids. With built-in end connectors to easily join multiple barriers. Ideal as a barrier in passageways during maintenance work, as a dam for directing liquid spills away from costly equipment or vulnerable environments. Highly visible yellow colour. Resistant to oil, water and most chemicals. Reusable after cleaning with a non aggressive detergent. Preferably to be used on a slippery surface. Dimensions: 3mx10mx7cm. Storage/transport box included
Inflatable splints Pneumasplint. Set of 4 splints packed in inflatable bag, such as to be used as a cushion. (leg, arm, hand and fo ot)
The Skipper road cone’s patented design features an integrated helix, which deflects wind and increases the cone’s stability. The innovative glass bulb shell is more reflective than prismatic alternatives and, like the entire Skipper range, is robust and durable. With a wide range of applications, from airports and traffic control systems to industrial and construction, the Skipper road cone is revolutionising road cones worldwide. Complies with BS EN 13422.
High shoe, in rough environments, weather or no weather, on construction sites and slippery floors - the ANTONIO XXSG GTX Mid ESD S3S WR CI is at home wherever it can become critical. The EXTRAGUARD® upper material offers optimal protection against external influences thanks to its robust construction and water-repellent properties For a secure grip on a wide variety of surfaces, the PU/PU WELLMAXX SAFETY GRIP sole with certified anti-slip resistance SR. And the PU creep nose in the toe area extends the life of the boot. Waterproof, oil- and fuel-resistant, the safety boot defies even the most adverse conditions. Thanks to Laddergrip in the profile of the sole, it is also suitable for safe use on ladders. BASF's Infinergy® sole core absorbs shocks and vibrations and ensures comfortable wear throughout the working day. ESD capability and cold insulation complete this innovative foot protection. Maten: 36-48. Conform: EN ISO 20345:2022 S3S WR/FO/SR/SC/ LG/CI, type B
-For breathing apparatus, 6,8L cylinder, mounted mask and demand valve -Outer dimensions: 700x300x520mm -Weight: 4,8 Kg
Well designed fireman's helmet made of thermo-hardened phenol textile, coated with photoluminescent paint and finished with reflective strips. Easily replaceable PU suspension, height adjustable, with a 4-point fastening strap with wheel ratchet. Pyros offers exceptional shock absorption and is resistant to extreme temperatures. The polycarbonate shield is scratch resistant and forms a hermetic seal at the top to protect against spattering. Shield tested in accordance with EN14458. This high-quality helmet can be worn in combination with corrective glasses, standard compressed air masks with a spider strap, and a communication system. Can be optionally equipped with a neck flap (see figure/ref.: 05550001). Total weight: 1150 g.
Flexible, chemically resistant PU sealing mat. Tightly seals off draingrates and prevents spilled liquids from draining away. As long as it iscleaned with a non-aggressive detergent, this mat is reusable. Dimensions: 60 x 60 cm. Suitable for sewers with dimensions 40x40cm. Comes in a handy storage box.
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has Kemblok and neoprene gloves attached to the sleeves with a 'locking cuff' . The suit is designed to be worn over the compressed air equipment. With pass-through and CEJN couplings to be able to connect to external air source. Available in: yellow. Sizes: S - XXL.
Kiss-of-life breathing mask with one-way valve for resuscitation and first aid. The mask serves as a hygienic cover over the victim' s face. Packaged in a handy, yellow key chain holder.
Compress to use for first, second or third degree burns. Safe, efficient and effective cooling method for burns. The compresses are made of a synthetic foam, that can fix the maximum amount of gel and therefore seamlessly connect to all contours of the body. Sterile milk white to clear hydrogel, largely consisting of water (96%) with preservatives. Tea Tree Oil disinfects, stimulates, is antibacterial and prevents the formation of scar tissue. Cools, relieves pain and minimises the development of the burn. Dimensions: 20 x 45cm.
Flame retardant and anti-static long sleeve t-shirt for women in 60% merino wool/38% Lyocell/2% polyester. Cool and comfortable material, regulates body temperature. Available sizes: XS-2XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Comfortable sitting harness with two attachment points: on the back and on the chest. Both shoulder and leg bands are adjustable and are padded for extra comfort. Equipped with a D-ring on the abdomen to allow work in seated position or to descend/ascend. This D-ring is not suitable for fall arrest. With sturdy, padded hip belt fitted with two positioning rings to free up hands for other tasks. Leg bands with quick-release buckles. Hip belt equipped with various rings for attachment of tools.
Fall arrest block in a 3.5m strap, sharp-edged, tested, with external shock absorber. Suitable for vertical and horizontal use and for a maximum user weight of 140kg.
Absorbent pads on 38 cm x 46 m sized roll, sheets perforated every 46 cm. These heavy-weight perforated pads on a roll are packaged in a box. Available per roll. The wipes are made from 3-ply melt-spun polypropylene. This means they do not absorb water and can per manently float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and othe r water-insoluble chemicals. Absorption capacity: 94 litres.
Flexible, chemically resistant PVC sealing mat. Tightly seals off draingrates and prevents spilled liquids from draining away. As long as it iscleaned with a non-aggressive detergent, this mat is reusable. Dimensions:120X120cm to seal: 100x100cm.
Fall-prevention device, 25 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. Weight: 7.4 kg.
High ranger shoe in nubuck leather, with a synthetic antiperforation sole and steel toecap. Fitted with a breathable, abrasion resistant liner in textile and leather. Outsole in Nitril, SRA antislip, oil and carburant resistant. Has chainsaw protection class 2. Removable, polyurethane insole with textile layer. Sizes: 36-47.
Flame retardant and anti static long john in 60% merino wool/38% Lenzing FR®/2% Beltron®. Cool and comfortable fabric which regulates body temperature, elastic waist band. Available sizes: S-XXL. Available colours: grey anthracite.
Solution for users looking for a glove that keeps hands warm and dry, protects them from contact heat, and offers high protection against cuts.
Fall arrest device 'double sharp edge' designed for use on aerial work platform. The dynamic force exerted on an EN28 anchor point in the event of a fall is less than 3 kN. Maximum user weight: 140 kg.
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Sizes: S - XXL.
Black plastic wall bracket for Skipper Unit (1044502/1044611), can be screwed down for permanent/semi-permanent use. Ideal for situations where the use of a pole or cone is not possible.
Chainsaw legprotector which can be attached to safety shoes.
Gloves with chemically resistant coating consisting of 7 layers. Can also be used as liner gloves. Extremely supple and ergonomically formed model. Offers protection against an exceptionally wide range of chemical products and solvents. Silicone and latex free. Working temperature: -40°C to 70°C
Flame retardant, antistatic with ARC protection and at the same time comfortable: the most important assets of the Tiolo. This T-shirt with round neck and long sleeves feels very light. The Tiolo is finished with elastic wrist bands and has good moisture-regulating and antibacterial properties. Quality: 60% Modacryl + 38% cotton + 2% AST; ± 220 g / m². Available sizes: XS-4XL. Available colors: Marine. Complies with: EN ISO 11612 A1B1C1F1, EN 1149-5, EN ISO 14116 and IEC 61482-2: 2009 class 1 - ATPV 5.7 cal / cm². PPE category: 3.
I-beam trolley for I-beams ranging from 9 to 35.5 cm. Maximum thickness of beam 3.2 cm. For horizontal use. Suitable for 1 person with max weight (gear included: 140kg). Atex approved. Can be used in combination with a safety line or fall-block.
A safety rope with a detachable and easy to handle floating rope. Floating bag with wide stiffened opening. High visibility color with reflective details. Breaking strength of 10kN.
