BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Sturdy glove made of nitrile and neoprene with rolled cuff. Powder and silicone free with special inner layer for fast and smooth donning. Chemical disposable glove.
Low shoe in microfiber, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
J-Energy series with Adidas Boost Technology. Low hygiene shoe in microfibre, with minimal seams. With protective synthetic toecap, synthetic antiperforation sole, comfortable Infinergy sole (PU/E-TPU) and Polyjal insole for optimal absorption of perspiration moisture. Elastic closure under protective tongue. Lining in non-woven textile.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Foldable mask, class P3, for toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 50. Contains at least 25% recycled content, at least 30% recycled content in individual product packaging, 100% recycled content in primary carton, and at least 76% recycled content in shipping carton.
J-Energy series with Adidas Boost Technology. Low hygiene shoe in microfibre with protective aluminium toecap, synthetic antiperforation sole, comfortable Infinergy sole (PU/E-TPU) and Memory ESD insole for optimal absorption of perspiration moisture. Lining in 3D-mesh.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Unique combination of allergy prevention and comfort. The new NeoTouch gloves are the first industrial neoprene gloves for one-time use. They are an ideal solution to protect employees against type I allergies. Since they are also powder-free, they also reduce the chance of dermatitis for the user. The gloves are highly resistant to acids, bases and alcohols and provide the same comfort as latex gloves. The NeoTouch gloves have a polyurethane inner coating for easy donning. The protective surface (resistant to acids, bases and alcohols) is larger and the gloves form a better seal against the protective clothing. Sizes: 6.5 - 7 / 7.5 - 8 / 8.5 - 9 / 9.5 - 10 / length: 290 mm.
Low shoe in white microfiber, with a synthetic 200J toecap. Fitted with a synthetic liner. Outsole in PU/PU. Sizes: 40-48.
Low shoe in white microfiber, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in Smartec Air Sanitized. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: D (35-49), XD (37-49).
FFP3 premium flat-fold mask. Exhalation valve. Practical individual packaging. Adjustable head band. Particle-filtering folding mask with exhalation valve. Color: white. Also available with carbon filter. D label (dolomite dust test passed): maximum breathability even with really high dust levels Cannot be reused. Comfort features: exhalation valve reduces breathing resistance and build-up of heat and moisture in the mask. Fexible and adjustable nose clip. Soft sealing lip guarantees a secure, comfortable sealed position of the mask. Soft material edges for high wearing comfort. Area of use : Construction and related industries – asbestos: work of very limited scope, disposal/cleaning: contact with radioactive contaminated dust, disposal/cleaning: handling of medical waste, woodworking: sanding/brushing off paint containing chrome, woodworking: sanding/brushing off water-soluble paints containing copper, chrome or arsine, wood working – hard wood (oak, beech, tropical wood): grinding and cutting, agriculture: treatment of sick animals/animal diseases, agriculture: handling mould spores, medicine/nursing/health: bacteria, viruses, infections, Legionella, metal processing – high alloy steel/stainless steel: drilling, grinding, milling, welding: hard soldering, welding: welding of stainless steel and aluminium . Safety features: certified FFP3 face mask to EN 149 and EU Directive 89/686/EEC.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
The upper is made of washable microfibre. The closure features an elastic strap under a waterproof flap. The breathable textile lining provides extra comfort. The composite safety toe cap offers protection up to 200 joules. The shoe is equipped with a PU2D sole.
Dust mask, class P3, for harmful dust. Form-retaining mask thanks toDura-Mesh shell on the outside of the mask. Ensures that the mask alwaysretains its shape, even when worn for extended periods or after foldingthe mask. Exhalation valve provides lower exhalation resistance and lowlevels of CO2 and moisture in the mask. The valve also faces downward to prevent fogging of glasses. Fitted with adjustable, elastic headbands. The new IonicAir filter technology reduces breathing resistance by 30%. NPF: 50.
Haevy duty backpack in flame retardant fabric to carry the motor unit Adflo and Versaflo R-300, TR-600 and TR-800 comfortlaby on the back.
Sturdy glove, for limited use, made of 100% nitrile with rolled cuff. Long version (30 cm), unpowdered and completely free of wax, silicones or softeners. Touch N Tuff offers 3x more perforation resistance than vinyl and natural latex!
Low mocassin in white waterresistent synthetic material, fitted with a Air Toe composite toecap (perforated) and non metallic antiperforation midsole Safe & Flex Zero+. Outsole in PU, extreem antislip, lightweight, oilresistant and antistatic. Energyabsorbing heelpart. Liner in 3D material, with moisture regulating celstructure. Removable and ergonomical insole in polyethylene/EVA with textile layer for a beter comfort. Big size range. This shoe has an extreme slip resistance and washable shaft for several activities. 100% metalfree. Sizes: 35-48.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
ABE2K1HGP filter for motor unit TR-600 and TR-800. Protects against organic and inorganic gases, sulphur dioxide, ammonia, mercury vapour and dust particles. Can be combined with filter cover TR-6500FC.
P filter for motor unit Versaflo TR-300. Protects against highly toxic dust,mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. In line with: EN12941.
Spray bottle with neutralising solution (DIPHOTERINE®) for immediate eye rinsing when chemicals have spattered into the face. 100 ml. Atomised water stream ensures perfect distribution. Shelf life two years, one-time use. Optionally available: leather holder for belt attachment.
Blue microporous cryogenic SAFEGRIP glove lined with wool. Guard of 15cm in leather. Equipped with a Velcro closure at cuff. Thickness: 1mm. Length: 40cm.
Dust filter protects against all types of particles (highly toxic dust, mist and smoke particles) Can be used in combination with the Sundström half and full face masks and motor units SR500/SR700. It's easy to combine this filter with gaz filters of this range. Clogging of the filter can only be detected through an increase of the (breathing) resistance.
Rescue safety harness, easy to put on due to padding, easy-to-adjust straps, with revolving adjuster system on the chest straps, shoulder reinforcements with integrated anti-trauma straps, and large stand-up D-ring on the back, and quick closures. With 2 hooks on the shoulder straps for rescue from enclosed spaces (victim comes straight up), to be used with rescue harness spreader (art.1031078).
Eye wash bottle containing DIPHOTERINE® solution for immediate eye rinsing in case of chemical splashes. Contents: 50 ml. Shelf life: 2 years. Supplied with a nylon pouch for belt attachment. Optional: leather pouch for belt attachment. Suitable for environments where there is a risk of contamination by hazardous liquids. Start rinsing within the first 10 seconds following the chemical accident. Use the entire contents of the bottle. Single-use only. DIPHOTERINE® solution is intended for use in the event of splashes of corrosive or irritant substances (except hydrofluoric acid). www.prevor.com.
Flexible glove in high quality flocked nitrile. The high abrasion and perforation resistance make this model excellent for the treatment of chemicals in refineries and for degreasing processes (e.g. in aviation and automotive sectors), drilling and cutting.
AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6300FC.
Ultra-thin cleanroom glove designed with 3 layers for superior protection against irritating chemicals including acids, solvents and bases, vacuum packed.
Anti-static absorbent pads measuring 41 cm x 51 cm. These heavy-weight perforated pads are packaged in a box. Packaged per 100 piece s. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacity: 112 litres.
Pre-filter for Sundström filters, if you change the pre-filter dayly, the life span of the P-filter wil be extended up to 10 times.
Very comfortable half-mask made of silicone rubber, fully maintainable. Fitted with adjustable head and neck bands for precise adjus tment of the mask. Half-mask can also be combined with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6 057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fil ter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used.
ABEK2HgP3 + Formaldeyde filter in plastic housing for 3M full face masks. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, formaldehyde up to 10ppm plus toxic dust, vapour and smoke particles. Only for use with 3M full face masks. Class 2 gas filter: for max. concentration of 0.5%.
Fall-stop device 2 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Plastic casing. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Also suitable for fall factor 2.
Comfortable half-mask in rubber, with unique sealing profile for extra safety and longer life. Fitted with ergonomically formed head and neck bands for precise adjustment of the mask. Large field of view due to placement of filters. Class 1 gas filter: for max. concentration of 0.1%. NPF: dependent on the filter used.
Absorbent pads measuring 7.6 cm x 122 cm. These heavy-weight socks are packaged in a box. Packaged per 12 pieces. These absorb all i ndustrial liquids, including oils, water, solvents and coolants. The great flexibility of the socks allows them to be easily placed around machines. Absorption capacity: 45 litres.
Comfortable half mask in TPE with integrated safety goggle and replaceable particle filters . Sizes: S/M and M/L.
Backpack to carry the motor unit Versaflo TR-300, TR-600 and TR-800 comfortly on the back. Easy to clean and adjust.
Prefilter as spare spart for motor unit Versaflo TR-300. No PPE.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Visor in actetate in order to be able to clean the visor with thinner. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Comfortable half mask in TPE with integrated and replaceable particle filters . Sizes: S/M and M/L.
AXP3 filter in plastic housing for 3M full face masks. Protects against organic gases and vapours with a boiling point <65 °C, plus toxic dust, vapour and smoke particles. Only for use in combination with full face mask, and filter is for one-time use only. Suitab le for: processes involving chemical risks.
ABEP filter for TR-600 and TR-800 motor unit. Protects against organic and inorganic gases, sulphur dioxide and particulates. Can be combined with filter cover TR-6100FC.
Low shoe in white microfiber, with a synthetic 200J toecap. Fitted with a synthetic liner. Outsole in PU/PU. Sizes: 35-42.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: CO with alarms at 20PPM and 100PPM. (min. 5PPM and 200PPM) Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Safety ashtray Elite Smokers Cease Fire - Cool black Dimensions: 965mm x 305mm
P filter for TR-600 motor unit. Protects against highly toxic dust, mist and smoke particulates. Clogging of the filter can only be detected through an increase of the (breathing) resistance, motor unit will then sound an alarm.
Pre-filter for TR-600. Ensures longer life of main filter.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
ATEX battery for TR-800. Usage duration depends on filters used. Can be charged with standard battery chargers TR-641 and TR-644. No PPE
A2P3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C , toxic dust, vapour and smoke particles.
Synthetic wipes, soaked in non-aggressive liquid. Handy wipes for cleaning full and half-face masks. Wipes are individually packaged.
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Complete D breast anchor point. Leg straps easily adjustable. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Extra lining on shoulder and leg for greater comfort; also easy to put on. Chest and leg straps have quick-release buckles. Standard version with trauma loops on leg straps for deployment after a fall. Harness is very easy to put on. Large stand-up D-ring on the back of the harness.
Lightweight disposable breathing hood with hood made of WEB 24 and visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Versaflo motor units or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 100 g. NPF: 500 when used with motor unit; 200 when used with compressed air. Available in S/M and M/L. with: EN 12941 and EN 166:2:F:3.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Inside of mask equipped with comfort pad for better sealing. Equipped with individually adjustable, elastic head bands. NPF: 50.
ABEK2 gasfilter in plastic housing for Moldex masks series 7000 and9000. Protects against inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 2 gas filter: for max. concentration of 0.5%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. risks.
A1 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C and formaldehyde, specifically for laboratories and hospitals. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dus t filter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%.
Comfortable half-mask with sealing profile for extra safety and longer life. Fitted with ergonomically formed head and neck bands for precise adjustment of the mask. Large field of view due to placement of filters. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5 %. NPF: dependent on the filter used.
Absorption granules that absorb virtually all aqueous and non-aqueous chemicals. Trivorex not only neutralises acids and bases but a lso oxidants, reductants, etc.
Economical spill kit in a yellow PVC carry bag with handle. Easily fits behind or under the seat of a lorry. Ideal for transport fir ms that occasionally transport liquids. Content: 10 pads (41 x 51cm), 2 socks (7.6 x 122 cm), 1 pair of gloves and 1 disposal bag. A bsorption capacity: 18 litres.
P3 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M h alf and full face masks when used with filter holder 603 and dust filter holder 501. Protects against toxic dust, mist and smoke par ticles.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 170 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Fall-stop device with 2 metre strap with integrated shock absorber and 2 self-locking hooks. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
The slimline, compact GasAlertMicroClipX3 provides affordable protection against atmospheric hazards. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BWs automatic MicroDock II test and calibration system. Tamper- proof, single-button operation. Compatible with motorised pump for remote sampling. Fitted with internal vibration alarm for use in noisy environments. Powered by a lithium polymer battery. Compliant with directive 89/336/EEC and Ex ia IIC T4. 3 years of warranty on the complete device, sensors, battery. New type of O2 sensor with life span up to more than 5 years
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter! Suitable fo r: processes involving chemical risks.
