BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Flame retardant and anti-static fleece. Quality: 60% modacrylic, 38% cotton, 2% AST, 280 gr / m². Available sizes: S-4XL. Available colors: Royal blue and navy. Complies with: EN ISO 14116 index 3, EN ISO 11612 A1.B1.C1., EN 1149-5.
Akileine very quickly regulates heavy foot perspiration. This spray neutralises the scent of perspiration and prevents development o f foot odour, mould and athlete's foot by means of a natural antibacterial agent (Swiss Alps lichen) and a double odour receptor. Th e spray is very suitable for treating socks and shoes. Protects the leather parts of the shoe. Contains: 150ml.
With the Druten sweater you will feel comfortable even in hazardous working situations as it provides protection against the risks of electrical flashover, against heat and flame, flamespread and static electricity. This navy sweater is finished with a small stripe segmented reflective tape and 2 side pockets with zip closure. Quality: 55% modacrylic + 43% cotton + 2% AST; ± 300 g/m². Available sizes: S-3XL. Available color: Navy. Complies with: IEC 61482-2 : 2018 APC1 - ATPV 14,8 cal/cm², EN ISO 11612 : 2015 / A1 B1 C1 F1, EN ISO 14116 : 2015 / IND.3 and EN 1149-5 : 2018.
Foldable mask, class P3, for toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 50. Contains at least 25% recycled content, at least 30% recycled content in individual product packaging, 100% recycled content in primary carton, and at least 76% recycled content in shipping carton.
High shoe in waterresistant black nubuck leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a Gore-Tex liner. Outsole in PU/VIBRAM, SRC antislip. Sizes: 39-47.
Belt, 42% modacryl/cotton 58% polyester, elastic, width 38mm. Available lengths: 90-130 cm. Color: black.
Flame retardant, anti-static T-shirt with long sleeves, Very soft handle, Comfortable, Good moisture regulating properties, lightweight, Inherent flame retardant & anti-static, Outside: Long sleeves, Elasticated wristband, Fabric: 60% Protex® - 39% Viloft® - 1% AST (Jersey); ± 175 g/m². in line with: EN14116 index 3, EN 1149-5.
Firefighter boots in fireresistant leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, a brasion resistant liner in Crosstech. BOA closing system. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
Further perfected version of this high-cut safety shoe with rubber toe bumper, that has been a standard for years.The combination of top grain hide leather, luxurious inner finish in leather,extra-wide width and the self-cleaning and improved sole profile makes Merlot CAP an exceptionally comfortable, robust, high-cut safety shoe.In addition, a new antistatic and antibacterial insole with integrated gel cushion provides optimal shock absorption. 100% metalfree. Sizes: 35-48.
Coverall, double polymer coated, extra layer of chemical resistant film, 100% particle tight, resistant to splashes of hazardous liquids (up to 5 bar), fixed hood with elastic, stitched and sealed seams, elastic at wrists and ankles and waist, zip with double flap and adhesive, thumb loops. Available in: orange, gray.
Flame retardant anti-static long sleeve sweatshirt, modaflame knit, 300 gr/m².
Waist height wader. Lightweight and versatile product with protective steel toecap and midsole. Waterproof, antistatic and superb slip resistance. Colour: Black. Size range: 37-47.
Hooded coverall with elastic face opening and chin flap for tight fit around respirator, stitched and over-taped seams, double self-adhesive zipper flap, double zipper and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle tight fabric, excellent barrier against a broad range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Antistatic treatment (inside).
Coverall flame retardant and antistatic, 80% cotton 19% polyester 1% anti-static yarn, satin binding, 280gr./m², 2 chestpockets with flap, 2 patched side pockets, 1 meterpocket with flap, 1 back pocket with flap, elasticated back waist, hidden closure, retro-reflective bands. Available in: navy, orange, red, charcoal and black.
The HAZMAX S5 HRO ESD boot, in green, chemical resistant HAZMAX, constructed seamlessly, equippes a 200J steel toe cap and has an antiperforation sole in stainless steel, with an even better cut resistance than your conventional safety boot. Boot is adjustable in height. Lining in knitted nylon. Aside from strong chemical resistance against chemical vapours and materials, this boot is excellent for fire fighters. Its vulcanised sole is resistant to contact heat up to 300°C, fuel, oils and is cold-isolating. Comfortable, removable and washable inlay sole up to 40°C. Sizes : 35 - 50.
High shoe in full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-50.
Flame retardant, anti-static long john, Very soft handle, Comfortable, Good moisture regulating properties, Lightweight, Inherent flame retardant & anti-static, Outside: Front fly, Ribbed ankles for extra comfort, Fabric: 60% Protex® - 39% Viloft® - 1% AST (Jersey); ± 175 g/m². in line with: EN14116 index 3, EN 1149-5.
Nitrile gauntlet gloves, lined with Intercept™Cut Resistance Technology that provides ISO C cut protection. Nitrile barrier provides advanced chemical protection from many frequently used chemicals. With new Grip Technology for the handling of wet or oily parts providing enhanced dexterity, grip and comfort. Finished at top withstraight-cut opening. Antistatic and suitable to use in foor environments .
High shoe, in rough environments, weather or no weather, on construction sites and slippery floors - the ANTONIO XXSG GTX Mid ESD S3S WR CI is at home wherever it can become critical. The EXTRAGUARD® upper material offers optimal protection against external influences thanks to its robust construction and water-repellent properties For a secure grip on a wide variety of surfaces, the PU/PU WELLMAXX SAFETY GRIP sole with certified anti-slip resistance SR. And the PU creep nose in the toe area extends the life of the boot. Waterproof, oil- and fuel-resistant, the safety boot defies even the most adverse conditions. Thanks to Laddergrip in the profile of the sole, it is also suitable for safe use on ladders. BASF's Infinergy® sole core absorbs shocks and vibrations and ensures comfortable wear throughout the working day. ESD capability and cold insulation complete this innovative foot protection. Maten: 36-48. Conform: EN ISO 20345:2022 S3S WR/FO/SR/SC/ LG/CI, type B
Flame retardant and antistatic long sleeve t-shirt in 60% modacrylic l/ 38% Lyocell / 2% polyester. Cool and comfortable material, regulates body temperature. Available sizes: XS-4XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Black waders in PVC, fitted with a steel 200J toecap and steelantiperforation midsole. Outsole from PVC Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Waders in PVC, 100% waterproof. Sizes: 39-47.
Splash suit in chemprotex 300 to be combined with Malina motor unit Clean Air (ordered separately). Suit with attached chemically resistant Kemblok gloves. The trousers have fixed socks and straight legs as a boot cover. Sizes: S - XXL.
These supple and comfortable outdoor gloves are made of water repellent cowgrain leather and fitted with an efficient and elastic 5 cm cuff. Sizes: 9 / 10.
Firefighting jacket in NOMEX® STRIKE, 220g/m², SOFIGUARD treatment with PU FR membrane (145g/m²) and aramid lining (250g/m²). High separate collar, patched radio pocket, microphone loop, zip closure under flap with velcro closure, cuffs with thumbloops, 2 patched pockets with flap and hole loops, torch holder, coated KEVLAR® reinforcements on shoulders and elbows, elongated back, bottom hem finished to prevent water rising, extra internal thermal reinforcements on shoulders and arms. Available colours: navy. Available sizes: S-4XL.
Spray bottle with neutralising solution (DIPHOTERINE®) for immediate eye rinsing when chemicals have spattered into the face. 100 ml. Atomised water stream ensures perfect distribution. Shelf life two years, one-time use. Optionally available: leather holder for belt attachment.
Comfortable white nylon liner combined with a tough nitrile coating featuring Ansell Grip Technology that reduces the amount of force needed to get a firm grip on oily objects. Provides high protection against bases, oils and some types of solvents and greases.
The Sweater Mulitnorm from the Tricorp Safety collection is made of 60% modacrylic, 39% combed cotton and 1% carbon with a canvas weight of 280 gr / m2. This product is EN ISO 11612 (heat and flame protection) and EN 1149 (protection against electrostatic properties) certified. Quality: 60% Modacryl / 40% Combed cotton, 280 g / m². Available sizes: XS-7XL. Available colors: Marine. Conforms to: EN ISO 11612 and EN 1149.
Flame retardant and antistatic long johns in 60% modacryll/38% Lyocell /2% polyester. Cool and comfortable material, regulates body temperature, elastic waistband. Available sizes: XS-4XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
The new HAZMAX S5 FPA HRO boot, in green, chemical resistant HAZMAX, constructed seamlessly, equippes a 200J steel toe cap and has an antiperforation sole in stainless steel, with an even better cut resistance than your conventional safety boot. Boot is adjustable in height. Lining in knitted nylon. Aside from strong chemical resistance against chemical vapours and materials, this boot is excellent for fire fighters. Its vulcanised sole is resistant to contact heat up to 300°C, fuel, oils and is cold-isolating. Comfortable, removable and washable inlay sole up to 40°C. Sizes : 36 - 48.
Blue safety goggles type Skylite with soft grey DCT element. Offerscomfort and a profound protection, and adapts to the face perfectly.Combines the security of goggles with the comfort of a pair of glasses.Plastic frame and clear polycarbonate lenses. All Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres, this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Firefighting trousers in NOMEX® STRIKE (220g/m²), SOFIGUARD treated with PU FR membrane (145g/m²), internal aramid (ARALINEX) lining (250g/m²). Press-stud closure under velcro, external reinforcements on knees, executed in 2 parts for easy bending, removable suspenders, 2 patched leg pockets with extra knee pads in neopreen. bottom finished for protection against water rising, leg hem provided with KEVLAR® re inforcements, leg cuffs. Available sizes: 164/82 untill 194/124. Available colours: navy.
Eye wash bottle containing DIPHOTERINE® solution for immediate eye rinsing in case of chemical splashes. Contents: 50 ml. Shelf life: 2 years. Supplied with a nylon pouch for belt attachment. Optional: leather pouch for belt attachment. Suitable for environments where there is a risk of contamination by hazardous liquids. Start rinsing within the first 10 seconds following the chemical accident. Use the entire contents of the bottle. Single-use only. DIPHOTERINE® solution is intended for use in the event of splashes of corrosive or irritant substances (except hydrofluoric acid). www.prevor.com.
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Gore-Tex. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on both sides in leather. Specially designed BOA closing system. Sizes: 38- 48.
Green, high pressure PU injected safety boot, through which a smooth PUsurface. Fitted with a 200J steel toecap and steel antiperforation midsole. This boot has an excellent thermal insulation. Outsole in PU. Waders coated with PU, 100% waterproof and flexible. Sizes: 40 -49.
Anti-static absorbent pads measuring 41 cm x 51 cm. These heavy-weight perforated pads are packaged in a box. Packaged per 100 piece s. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacity: 112 litres.
Low shoe in full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Firefighter boot with chainsaw protection (class 2) in black water and firerepellant PBI fabric and microfiber, with a synthetic ant iperforation sole and composite 200J toecap. Reflectors on both sides, AN ankle protection. Fitted with a Crosstech liner. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on both sides in PBI. Sizes: 35-50.
A1BE2K1/CO/NO/HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boi ling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, toxic dust, vap our and smoke particles, nitrous gases and (to a limited extent) carbon monoxide. Only for use with full face masks with standard th reads. BE filter of class 2: for max. concentration of 0.5 %. AK filter of class 1: for max. concentration of 0.1%.
Low shoe in waterresistant black nubuck leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a Gore-Tex liner. Outsole in PU/VIBRAM, SRC antislip. Whole insole. Sizes: 39-47.
Lanyard, 2 metre length, consisting of kernmantle rope of 11mm with integrated shock absorber. Fitted with one standard carabiner and a snap hook with a 65 mm gate opening. Serves as connection between anchor point and harness.
Flame retardant and antistatic t-shirt in 60% Protex®/39% Viloft®/1% AST (180g/m²). V-neck, long sleeves, stitched seams, length back: 69 cm. Very soft and good moisture regulating properties. Available sizes: S- 3XL. Available colours: navy, grey.
Trousers, Guardian H²O, flame retardant, antistatic, water and wind proof, elastic in waist, side pockets, reflective bands.
Flame retardant and antistatic poloshirt Bladel with ARC protection: Lay-flat collar; Closure with hidden buttons under flap; Round sleeves; Segmented reflective tape (2,5 cm); Back length 74 cm (L). Quality: 55% Protex + 33% cotton + 10% p-Ar + 2% AST; ± 230 g/m². Available sizes: S-3XL. Available colour: Navy.
Overboots, Tychem F, antistatic, non-slip soles, elastic and bindingaround the leg. Available in: grey.
Leather conditioner, when used regularly, ensures that your shoes remainin optimal condition. Leather conditioner protects and rejuvenates the leather, keeps it supple and makes the shoes waterresistant. Delivered in bowls of 200ml. No PPE.
Jacket, Guardian H²O polyester, 260 gr/m², zipper under flap, lined, hood also available. Concealed zipper and velcro closure at centre front, chest pockets with safety flaps and velcro closure, inside pocket at left hand side, goggle pocket behind storm flap, lower pockets with safety flap, lower side entry pockets with blind zipper closure, adjustable velcro closure at cuffs, adjustable puller at hem, fully taped seams, reflective striping.
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Crosstech (resistant against bacteria and chemicals). Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Sizes: 38-48.
Mask in very comfortable and high quality EPDM rubber. Anti-vapour visor in polycarbonate with very wide field of view. Voice transfer occurs via the speech membrane that provides clear voice transmission. Double exhalation valve to keep exhalation resistance very low. The headband is easily adjustable, includes a carry strap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coupling.
Glove in butyl rubber, unlined, length 35 cm, thickness 0.78mm. Colour: black. Flexible and comfortable, protects against a wide range of chemical products, detergents and solvents, liquid-tight. Silicone-free and antistatic. Sizes: 7-10. Suitable for chemical, petroleum and paint industry, transport and handling of hazardous products.
Hazmax S5 safety boot in ultra chemical resistant material with steel toecap and steel antiperforation sole. Removable, washable insole. Vulcanised rubber sole, oil resistant, non-slip and heat resistant up to 300°C (contact heat). With shock absorbent tunnel system in the heel. Colour: green. Available: 35-47.
Composite rescue stick, used to rescue a victim (in the event of electrocution, blinding, etc.) during work on posts of the 1st, 2nd and 3rd categories. Allows the victim to be brought to safety by securing him at the waist. Length 1470mm. Weight 1.4 kg. Voltage 45 kV.
Buff flame retardant and antistatic in 87% Nomex®, 5% Kevlar®, 4% elasthane, 4% carbon fibre. Keeps bodytemperature in cold environments. Protects against heat, flames and static electricity. Dimensions: 24,5 cm x 54 cm. Available colours: navy, red, green, beige.
Foldable mask, class P3, New Generationfor toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic woven headbands. Improved Cool Flow Comfort Exhalation valve provides even lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. This mask does not contain components of rubber latex and PVC. NPF: 50.
Reflective cone made of polyvinyl chloride, for cordoning off areas and traffic control. Perfectly visible, both day and night. Equipped with sturdy non-slip base. Length: 50 cm. Colour: orange/white.
Post and pedestal system to place Skipper unit (1044502/1044611), fits perfectly in any environment. The base can be filled with water or sand for extra stability and sturdiness.
Coverall, 50gr./m² polyester viscose rayon mix, firming nylon film on the inside, non-woven, flame retardant, limited use, to wear above heat- insulating clothing, 3-thread overlock seams, offers protection against hazardous dust and dirt. Available in: Blue.
Electric insulating boot with epoxy coated steel 200J toecap. Foreseen with a rubber vulcanised outsole (fuel and oil resistant), antislip and tested against 35 KV, energy absorbing heel. Every boot is tested to 25 KV before leaving the factory. This boot is 100% waterresistant and adjustable in height. Easy to pull out through the 'hands free removal'. Needs to be retested every year. Resitance to hot contact 60 seconds 300°C. Liner in polyester, washable insole. Sizes: 35(uk3)/50(uk15).
Flame retardant and anti-static hat. Provides protection in thermal risk environments. Comfortable and bi-elastic. Available color: Dark blue. Complies with: EN ISO 11612/15, EN 1149-5/18.
Black safety/fire fightingboot in nitril rubber with 200J non-metallic toe cap and synthetic anti-perforation sole(Sizes 36 and 37/38 toe cap and synthetic anti-perforation sole in metal). Outsole in nitrile. This boot offers an excellent protection against heat with emission of chemicals and contact with flames.
Safety glasses in grey Polycarbonate. Sturdy, protective, stylish, comfortable and leightweight model (21g). Foreseen of a an adjustable nose bridge and TIPGGRIP temples, which fits perfectly all faces thanks to its shape-memory material. With Platinum coating: This permanent coating on both sides of the lens gives them a high resistance to scratching (1.4 cd / m²), to the most aggressive chemicals and delays fogging. Protects against UV-radiation. EN 172 5-2,5.
Splash suit made of blue laminate. Suit with attachedc hemically resistant Kemblok gloves. The pant legs have integral socksandstraight legsthat can bepulled over boots. The zipper is located on the back of the suit. The suit is designed to be worn over the compressed air equipment. Available in: blue. Sizes: S - XXL.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and split leather hood cuff. Total length 35cm. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Industrial headlamp Vizion I,with non-slip rubber helmet strap.Safety Yellow, ATEX. 3 beam modes: spot,diffuse and red diffuse.The red diffuse mode makes night vision possible. The Vizion is O-ring sealed for a completely watertight guarantee. Designed for gloves. Effortlessly access the power button and beam selectors with even the thickest gloves. Lamp module can be removed from its casing for use as a portable work light.
Flexible, chemically resistant PU sealing mat. Tightly seals off draingrates and prevents spilled liquids from draining away. As long as it iscleaned with a non-aggressive detergent, this mat is reusable. Dimensions: 90 x 90 cm. Suitable forsewers with dimensions 70x70cm. Comes in a handy storage box.
Small, multifunctional bin for quick and efficient response to leaks or maintenance projects, anywhere in the factory. The spill kit includes a handy inner panel with well organised, clearly legible leakage guidelines. Absorption capacity: 69 litres. Content: 1 ro ll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of MRO qualit y.
Delineation tape in red/white with a length of 100M, with of 80mm.
Synthetic wipes, soaked in non-aggressive liquid. Handy wipes for cleaning full and half-face masks. Wipes are individually packaged.
T-shirt Multinorm 103004 with long sleeves and reflective bands. Quality: 60% Modacrylic / 39% Cotton / 1% Other, 200 g/m². Available colors: Navy. Available sizes: XS-5XL. Complies with: EN 1149-5:2008 and EN ISO 11612:2015.
