BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Thin glove for medium arc flash protection with high cut resistance. Flame retardant neoprene coating on the palm. Sizes 7-11. Complies with: ASTM F2675 ATPV palm: 22cal/cm², backhand 5.9 cal/cm², IEC 61482-1-2 CL1 EN388:2016: 3X31D EN407: 41XXXX
Glove with excellent grip in oily environments, preventing slippage and injuries. Triple-coated with nitrile foam in the palm, for a solid oil barrier. Lining with 18 gg knitting technique and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 4.X.1.1.A - EN 407:2020: X.1.X.X.X.X
Glove with black HPPE and Zirnium and black PU coating and reinforcement in black split leather on palm, and fingers. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Highest cut resistance. Sizes: 7-11, lenght: 25cm.
Cut-resistant glove in special graphene fibers with HCT® Nitril Nano-foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers. Touchscreen compatible.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. Touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. DMF free, with impact protection on the back of the hand. Sizes 6 - 12.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a 3/4 liquid-tight coating. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Gloves designed for work in cold working conditions. The combination acrylic/spandex in the seamless liner (13 gauge) combines a light weight with warmth and suppleness. The double latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: 7(S)-11(XXL).
Very fine and cut resistant glove (43.9N) designed for fine work with high cut risks. Can be washed up to 5 times at 40°C without loss of efficiency.
The thinnest glove with cut protection level F, with the new advanced CRF® omni technology with a reinforced HPPE cut protection fibre. 21 gauge, with PU coating. Reinforcement between thumb and index finger and touchscreen functionality. Conforms to: EN ISO 21420:2020 - EN 388:2016+A1:2018 2.X.4.2.F
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Offers protection against contact heat of 100°C during 37 seconds, and 250°C during 12 seconds. Sizes: 8,9,10.
Seamless lined glove with foam latex coating on the full glove and extra latex on the palm. Extremely good grip and abrasion resistance. Carrier in nylon/polyester. Sizes: 6(S) -10 (XXL).
Cut-resistant glove in special graphene fibers with HCT® micro foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers.
Cut resistant, seemles knitted nylon-spandex-basalt fibre thread, CFR technology,stainless steel fibre yarn gloves (13 gauge) with insulating layer nitrile foam/aqua PU in the palm with reinforcement between thumb and index. approved for food handling, touch screen compatible, . Heat resistant up to 100°C contact heat. DMF free. Designed for heavy work.Sizes: 6-11.
The ultralight MFT PRO 381 gloves are designed with flexibility and comfort in mind, even during extended wear. The unique microfiber design, weighing only 19 g and with a finger thickness of just 0.84 mm, ensures the 381 offers optimal tactility when working on delicate projects. Sizes: 6-10 Compliant: EN388: 4121X
Cut resistant gloves with Kevlar® liner in combination with roughened latex coating offer good grip and optimal protection against cutting injuries in both dry and damp environments. Sizes: S / M / L / XL. Available in: blue.
Dexterous cut resistant glove with highest cut level F, suitable for precision work. Ultra light thanks to 18 gg knitted with CRF® Omni cut resistant technology. Palm dipped with super soft nitrile foam that provides excellent grip on dry surfaces. Reinforced thumb crotch for improved longevity. Breathable materials for all day comfort. Wide range of sizes means a perfectly fitting glove for everyone. Skin friendly with Derma-test and Oeko-Tex certificate. CAT II . In line with : EN 407:2004 X1XXXX - EN 388:2016 4X43F - EN 420:2003+A1:2009
Glove with excellent grip in oily environments, preventing slippage and injuries. Triple-coated with nitrile foam in the palm, for a solid oil barrier. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.3.C, EN407:2020: X.1.X.X.X.X
Cut-resistant gloves with Hagane coil liner in combination with the nitrile foam coating on the palm provide a good grip and optimum protection against cutting wounds in both dry and humid environments. Sizes: 6-10.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a liquid-tight palm and an airy top. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Solution for users looking for a glove that keeps hands warm and dry, protects them from contact heat, and offers high protection against cuts.
Carrier: Nylon / Dyneema® with roughened nitrile coating. Nylon inner glove for better comfort. Waterproof. Protection up to 500BAR. Sizes: 9 and 11. In line with EN388: 4.5.4.4
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Antistatic, silicone-free and DMF-free.
Antivibration protection for building and construction applications. Synthetic glove with premium PU in the palm. Damping foam for excellent anti vibration performances. Ventilation between the fingers. Exellent fit and preformed hand shape. Sizes: 7-12.
This glove offers excellent grip in dry, wet and slightly oily environments. Coated knuckles and triple nitrile foam palm coating for a solid oil barrier. Lining with 18 gg knitting technology and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 4.1.1.1.X - EN 407:2020: X.1.X.X.X.X
Seamless knitted nylon glove with white PU coated fingertips. For microelectronics, packaging, archiving and precision work. Sizes: 6, 7, 8, 9.
Extreme comfort and protection in high cut risk applications for increased compliance and an uninterrupted workday. The Intercept™ Cut resistant Technology provides high levels of protection against lacerations. Lightest weight design for comfort and dexterity, su pporting worker use compliance. High abrasion resistance delivers longer product use life. Suitable for use across a wide range of applications and risks, avoiding the need to change gloves when transitioning between tasks. Intermittent handling of hot work items up to 100°C. Latex and Silicone free. Sizes: 6-11.
Seamless knitted polyamide/elastane grey glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 25 seconds). Suitable for handling, and precisionwork in dry and oily conditions. Sizes: 7-11.
Gloves with high cut resistance and PU coating. 18 gauge. Very thin knit, 0.7 mm. Touchscreen. Reinforced thumb cavity. Sizes 6-12. Complies with: EN388:2016: 3X43F
18 gauge knitted glove made of HPPE, polyamide and Spandex fibres. Nano foam nitrile coating on palm and 3/4 back. Protection against impact on back and fingers. Touchscreen. Sizes: 7 to 11. Conforms to: EN388:2016: 3.X.4.2.D.P
Glove with excellent grip in oily environments, preventing slippage and injuries. Coated knuckles and triple nitrile foam palm coating for a solid oil barrier. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.2.C, EN407:2020: X.1.X.X.X.X
Glove with high cut protection (51N) and latex coating for excellent grip. Leaves no marks on surfaces. Sizes: 7-11 Compliant with EN 388 3X43F, EN407:X2XXXX
Highly cut-resistant glove in very fine knit, 0.85 mm. 18 gauge. Soft nitrile coating. Touchscreen on all fingers. Reinforced thumb cavity. Sizes: 6-12 Complies with EN388: 4X43F
The micropore nitrile palm coating is designed to deliver excellent grip, in both dry and oily conditions. With 360 degrees breathability, hands will be comfortable and free from irritation. EN388: 2016 level E cut resistance Rhino Yarn™ cut resistant technology; EN388: 2016 4 × 4 3 E; Fine 15 gauge lightweight liner; Increased abrasion resistance to level 4 for 2021; High level of tactility and dexterity; Approved for food contact to EU Regulation 10/2011; Touch screen compatible; Breathable liner and palm coating; New micropore nitrile palm delivers good dry and oil grip; Antistatic to EN1149-5: 2008.
A very thin and flexible nitrile-dipped ESD glove for ESD-protected work areas where maximum dexterity is needed. The glove has touchscreen functionality, ensuring seamless transition between duties without having to remove the glove. Thin 18 gg fibre and highly breathable to ensure all-day comfort. CAT II . In line with : EN ISO 21420:2020 - EN 407:2020 X 1 X X X X - EN 16350:2014 R <(><<)> 1,0 x 10⁸ Ω - EN 388:2016+A1:2018 4 1 1 0 X - IEC 61340-5-1:2016 R <(><<)> 1.0 x 10⁹ Ω
Soft and versatile glove with cut protection (level C/ANSI cut A3), made from recycled polyester and bio-based Dyneema® fibers - an innovation that limits dependence on fossil raw materials. Good for the environment! 13 gg knitting technique with touchscreen function - use your smartphone with gloves on. Less water consumption due to the new nitrile foam coating. Sizes: 6-11. Conforms to: EN 388:2016: 4.X.4.2.C and EN 407:2020: X.1.X.X.X.X.
Glove with very high cut protection, suitable for handling very sharp parts in the glass and metal industry.
Very soft, durable assembly glove made from recycled polyester. One pair is equal to a 0.5l PET bottle. The glove is 15 gg knit, contains spandex and has a new nitrile foam coating that uses less water in production. Touchscreen function - operate your smartphone with gloves on.. In line with : EN 388:2016+A1:2018 4121X - EN 407:2020:X1XXXX
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Nitrile coating on the palm with sand grain finish for extra grip. Fleece lining for extra warmth in cold temperatures. Reinforced thumb hole to reinforce high-wear areas. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.F.P
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass
HPPE glove, gauge 18. Nitrile foam coating on palm and fingertips. Wrist with elastic tightening. Ideal for precision work. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.2.1.B
Knitted glove made of HPPE and cobalt (without fiberglass), 13 gauge. Double RGO GRIP coating (nitrile + microfoam-nitrile) on the palm and three-quarters of the back. Elasticated wrist. Touchscreen. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D, EN407:2004: X.1.X.X.X.X
This glove offers excellent grip in dry, damp and slightly oily environments. The single nitrile foam coating in the palm makes the glove comfortable, yet grippy. Lining with 18 gg knitting technology and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 3.1.1.X - EN 407:2020: X.1.X.X.X.X
Winter glove, outer layer in polyester, 13 gauge. Waterproof membrane. Polyacrylic lining. Nitrile foam coating. Touchscreen. Oekotex certified. Sizes: 7 to 11 Conform: EN388:2016: 3.X.2.1.C EN511: 1.2.1
Very flexible lightweight glove in Dyneema. Hyflex offers excellent cutting resistance. The white outer coating in polyurethane protects the dyneema fibre (and thus the hand) during abrasive activities. This glove with great sensitivity will last and last. Recommended for manipulating materials and tools with sharp edges, e.g. in the automotive industry or in the production of durable goods. Sizes: 6-10.
Seamless knitted aramid and steel wire glove, fitted with a palm and finger coating in natural rubber. Excellent cutting resistance and good grip due to rough finish. Sizes 7, 8, 9 and 10.
A general purpose safety glove made of 13gge HPPE fibers with black PU coating on the palm. Guarantees all-day comfort. Suitable for fine work with limited cutting risk. Sizes: 6-11. Complies with: EN388:2016 4.X.4.2.B
Impact glove with new and unique KOROYD impact protection technology. An optimized PU elastomer absorbs and distributes the impact energy through its unique construction, reducing the load on critical parts of the hand. Advanced and increased impact protection: ANSI/ISEA level 3. Extremely suitable for heavy environments. 18 gauge, Nitrile-PU foam coating. Reinforced thumb attachment. Touchscreen. Sizes: 7-12. Conforms to: EN388:2016: 4.X.4.3.F.P
Warm, insulating gloves with RIPEL™ technology provide fully water-proof gloves. Leading dexterity among liquid-proof cold weather gloves. PVC-foam coating stays flexible down to -25°C, food approved.
Seemles knitted nylon-spandex gloves (18 gauge) with insulating double layer nitrile foam on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Seemles knitted nylon-spandex gloves (18 gauge) with 3/4 insulating double layer nitrile foam on the palm. Heat resistant up to 100°C contact heat. Sizes: 7-11.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The 3/4 nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex Certified.
Seamless insulate lined glove with water repellent natural rubber latex on the full glove, with a dual rubber latex coating with rough finishes surface on the palm. The dual coating provides high abrasion resistance and longer usage. Designed to protect at temperatures down to -30°C for short or intermittent contact and to contact temperature up to 250°C for 15 seconds. Anatomical hand shape design and high visibility orange color. Sizes: 7(M)-10(XXL).
Tactial cut protection glove for universal interventions, with excellent dexterity on the 'trigger' finger, touch screen function, padding on the palm, and silicone dots for an excellent grip. With extra choc protection on the back of the hand. Sizes: 6-11.
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, impact protection on the back of the hand and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass. Compatible with touchscreens.
Highly dexterous glove with high cut resistance. Nitrile foam coating with Aerofit technology (up to 30% thinner). Breathable 21 gauge liner. Food approved. Touchscreen compatible. Sizes: 5–12 Compliant with: EN 388: 3X32F
Very thin and flexible cut protection glove for fine assembly work with small, sharp objects. The cut protection is made from the world's first bio-based cut-resistant fiber - Dyneema®. This innovation reduces dependence on fossil raw materials and reduces your company's carbon footprint. Good for the environment! The glove is very light, 18 gg and has a PU coating for better grip. Conforms to: EN388:2016+A1:2018: 2X41B
HPPE glove, 13 gauge. Sandblasted foam nitrile coating on the palm and fingertips; elasticated wrist. Maximum abrasion and tear resistance. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D
RubyCut fiber knitted glove, 18 gauge. Foam nitrile coating, nitrile reinforcement thumb/index. Wrist with elastic tightening. Extreme finesse. Oekotex certified. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.3.1.C
RubyCut fiber knitted glove, 18 gauge. Foam nitrile coating, nitrile reinforcement thumb/index. Wrist with elastic tightening. Oekotex certified. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.4.2.D
Knitted glove made of 51% recycled polyethylene, polyester, lycra, 15 gauge. Nitrile foam coating on palm and fingertips. Wrist with elastic tightening. GRS and Oekotex certified. Sizes: 7 to 11. Conforms to: EN388:2016: 3.X.1.1.A
Knitted glove made of HPPE and cobalt (without fiberglass), 13 gauge. Double RGO GRIP coating (nitrile + microfoam-nitrile) on the palm the back. Elasticated wrist. Touchscreen. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D, EN407:2004: X.1.X.X.X.X
Impact resistant glove for demanding environments. Large back coverage. Touchscreen. High visibility colours for improved hand gestures. Conforms to EN388:2016: 4.X.4.3.D.P, EN407:2020: X.1.X.X.X.X
