BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Economical solution for light applications where a durable coating and firm grip is required for working in greasy conditions. The double-layer nitrile coating with a roughened finish keeps hands dry and comfortable, and provides a good grip. Fully coated glove on 13 gauge polyester liner. Sizes: 6-11. Conforms to: EN388: 2016 4.1.2.1.A
Gloves with blue nitrile layer on a jersey lining, palm coating and tricot cuff. Excellent abrasion and cut resistance and very good grip when working with oil and greases. Flexible, comfortable and ideal for use in automotive, construction and metal working indus tries. Application: heavy working conditions. Sizes: 8-10.
Padded winter glove with synthetic leather palm and polyester back. Reinforced fingertips. Fleece lining. Windproof and waterproof membrane. Good grip. Velcro closure. Touchscreen compatible. Sizes 7-12. Complies with: EN388:2016 1.1.2.1.X and EN511 X.2.X
Durable heatprotective quality leather in the palm of this welding glove. Back of the hand in aluminised para-aramide. Hand is completely lined with para-aramid/cotton fabric and a Porelle membrane: water- and damp-proof. Sizes: 8-9-10-11.Length 45 cm.
Sustainable glove with a natural latex coating. The liner consists of 44% recycled material, namely 25% recycled polyester and 19% recycled cotton. The roughened latex coating provides a firm grip and good abrasion resistance. Versatile because the liner also offers a limited degree of cut resistance. (class B) and offers good short protection against thermal risks (up to 250 ° C). Possible applications: general maintenance, construction and logistics, green service. Conforms: EN388: 2016: 3.1.4.2.B, EN407: X2XXXX. Available sizes: 8-11.
The XA-326 is specifically designed to provide maximum "all-around" performance on slippery grip applications in non-hazardous chemical environments. The 13-gauge seamless wooly nylon liner and "backhand coated style" provide an excellent flexibility, minimizing h and fatigue, thus increasing productivity. A soft yet durable latex coating technology "MicroFinish" adheres to virtually any dry or slippery surface. Sizes: 6(XS)-11(XXL).
Gloves knit from Zirnium® yarn, palm and fingers covered with cowsplit leather, 1.1 mm thick, 25 cm length, seams stitched with Kevlar® fibres.
Thin work glove with a microporous nitrile foam coated palm. This ensures a very good dry grip and protects against moisture. Oeko-Tex approved. Resistant to contact heat up to 250°C (for 15s). Sizes 5-12. Complies with: EN388:2016 4.1.3.1.X, EN407: X.2.X.X.X.X
Glove made from renewable raw materials: natural bamboo fibres, with flexible coating that ensures high sensitivity, comfort and effective grip. This glove adapts exactly to each individual shape of the hand after 3 to 5 minutes. Exceeds REACH regulations. CO² neutral production in Germany, short supply chain.
Ideal for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
Good level of abrasion resistance <(>&<)> grip, but also high sensitivity in dry to slightly oily conditions.
Very comfortable seamless knit glove in a nylon double-nitrile fabric for superior grip. Sizes: 6-11.
Thin, flexible work glove – part of our ENVI sustainable products series. ENVI gloves are manufactured using less energy and/or less water consumption. They are also DMF, butadiene and silicon-free. 3304 has a 15 gg liner made of glycose/glycerol starch and small amount of nylon for a more sustainable choice and exceptional moisture management. Approved for contact heat level 1 and Oeko-Tex certified. Premium nitrile palm dipped. Touchscreen.
Cut-resistant glove with HXFIBR fiber (18 gauge) with PU coating. Very finger sensitive. reinforcement between thumb and forefinger. Thight fit and flexible cuff, without glas fibre. ESD, touchscreen function. Free of DMF, silicone and natural latex. Oeko-Tex standard 100. Sizes: 6-12. In line ith: EN388:2016 4.X.4.2.C, EN407: X.1.X.X.X.X.
The latex coated glove with steel, fiberglass, Kevlar lining and extra long knit cuff is the practical solution for a safe way to manipulate glass, metal and plastic. She is distinguished by an exceptional cut resistance, excellent overall mechanical performance and superior comfort. In wet or dry conditions, this glove an excellent grip thanks to the coating on the palm of natural rubber. The PowerFlex ® 80-658 is a unique glove on a highly efficient way to adequately protect combines with natural dexterity.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 20,000 volts, operating voltage of 17,000 volts. Length 41 cm, Sizes: 7-12.
Very comfortable high cut resistant (cut class E) glove with a gray PU coating. Highest dexterity (18 gauge). Ideal for dry applications in disassembly, handling of objects with sharp edges. Touch screen functionality. According to EN388: 4.X.4.2.E
High Cut resistant glove with Nitrile Coating * High dexterity / 18 gauge * Reinforecement between thumb and index finger * Touch Screen functional * Made from black Kevlar * Highest cut resistant class F * Short protection against contact heat up to 100°C
Glove with PE and Zirnium with PU coating and reinforcement in split leather on palm, index finger and thumb. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 7 / 8 / 9 / 10 / 11.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 2500 volts, operating voltage of 500 volts. Length 36 cm, Sizes: 6-12.
Seamless knitted cut resistant glove in polyethene and basalt fibres. Coated completely with nitrile that makes the glove water repellent. With nitrile foam coating on the palm for optimal grip in oily and durty conditions.Sizes 7 - 11.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (15 gauge) with insulating layer nitrile foam in the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
This glove combines tough protection with natural comfort. The Intercept™ Cut Resistance Technology provides extreme cut protection, the liner made with water-based polyurethane/nitrile provides enhanced comfort and dexterity, it is solvent free and OekoTex 100 certified. The Fortix technology provides extended use with up to 4x the durability in the thumb crotch region versus the standard glove without thumb crotch reinforcements. Latex and silicone free. Sizes: 6-11.
Very thin and light glove, 15 gauge. The INTERCEPT™ yarn provides high cut protection while providing dexterity and comfort. The nitrile palm coating design improves grip, extends glove life in abrasive conditions and allows the hand to breathe. The glove is silicone free which prevents the transfer of silicone contaminants to metal parts prior to painting. The Oeko-Tex certification guarantees that the glove does not contain any harmful substances such as DMF and other chemicals.Fiber glass free, latex free, antisttic, food approved and machine washable at40°C. Sizes: 5-12.
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating ensures for a good grip. 13 gg liner and extra reinforcement along the thumb and index finger. Very high level of cut protection, approved for contact heat up to 100°C (15sec). Approved for ESD environments and food safe for all types of food. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X
The new INTERCEPT™ fibre offers unrivalled cutting protection and more comfort and mobility. The coated palm design gives the user more grip, prolongs the life of the glove during abrasive work and allows the back of the hand to breathe. The silicone-free PU coating does not hinder processing of painted metal parts. The grey coating camouflages dirt when working in polluted environments.
Durable glove made from 90% recycled nylon fiber (15 gauge) with a nitrile foam coating on the palm. Touch screen compatible. The ZONZ™ patented knitting technique provides improved and comfortable hand movement. Less packaging material by omitting plastic in the inner packaging. The FORTIX™ technology ensures that the glove is 20% more abrasion resistant, and can therefore be used longer in applications where a lot of abrasion resistance is required. Latex, silicone and DMF free. Suitable for use in the food industry. Sizes: 5-12. Complies with: EN388:2016: 4.1.3.1.A, EN407: X.1.X.X.X.X.
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF-free.
The neoprene coated glove with Kevlar. Materials used in the glove are inherently flame resistant, even after washing. Arc Flash Hazard/Risk Category 2: helps protect workers against arc flash hazards.
Orange Hiviz winterlined glove with seamless acrylic liner, water thight and fully latex dipped. Sizes: 8-11.
Black Zirnium yarns knitted glove with black nitrile foam coating in the palm. Excellent cut resistance and dexterity and very good grip in oily conditions Sizes: 7-11.
This glove, made with the very latest Dyneema® Diamond Technology 2.0, provides unparalleled comfort combined with high cut resistance and high fingertip sensitivity, and this for tough work. This without using glass fiber! The patented foam nitrile coating provides a solid "oil grip" and is extremely durable so that it can be worn longer in abrasive applications. The glove also offers short-term protection against contact heat up to 100 ° C. The cooling effect of the fiber provides the necessary comfort during the entire working day! Intrinsically one of the most cut resistant fibers available at the moment !! Available sizes: 7-12. Conforms to EN388: 2016: 4.X.4.3.D and EN407: X1XXXX
Very durable gloves for all extended tasks in cold conditions. Double nitrile coating on insulating lining.
Providing EN388: 2016 maximum level F cut resistance and abrasion resistance the 50-6121 has a breathable, sandy foam nitrile palm coating designed to deliver excellent grip, particularly in oily conditions. The thumb area has been reinforced with a nitrile patch to provide additional support and protection in a key high action area, extending the life of the glove. EN388: 2016 level E cut resistance; EN388: 2016 3 × 4 3 F; EN407: 2004 × 1 X X X X; Rhino Yarn™ cut resistant technology; High level of abrasion resistance and durability; Good oil and dry grip; Breathable open back and coating; Dark colour hides dirt, extending life of the glove; Reinforced thumb crotch with nitrile patch.
Gloves with a yellow nitrile layer on interlock lining. Coated palm, open back, tricot cuff. Good grip and abrasion resistance. Ideal for light work and in warm environments.
Extra thin (18gg) cut resistant glove that keeps the user cool all day long. High dexterity, nitrile coating on the palm and fingers. Approved for use in contact heat up to 100°C (15sec) with reinforced thumb grip and touch screen compatible. Sizes: 6-12. Complies with: EN388:2016 4.X.4.3.C, EN407 X.1.X.X.X.X
Gloves with roughened rubber coating on interlock lining with open back and tricot cuff. Good cut resistance and very good grip on dry and wet or smooth surfaces.
Ultra-thin (21gg) and airy glove that feels like 2nd skin, for precision work.
Seamless knitted Kevlar glove, with palm and finger coating in natural rubber. Excellent cutting resistance and good grip due to rough finish.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. Oekotex certified.
Driver extra gloves are very light, supple and durable. This glove is extremely comfortable and has a perfect fit. The top-quality sheep skin leather also provides very good tactility.
Very finger-sensitive glove with nitrile coating and nipples. Coating resistant to contact heat of 100°C for 15 sec. Sizes 7/ 9/ 11.
A supple glove with cut, puncture and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and the fingertips from needles and sharp objects. Knitted of HDPE cut-resistant fibre, which gives the whole glove cut protection level 5 according to EN 388. Liquid-proof all the way down over the knuckles, making them suitable for e.g. cleaning and wet/oily work. Extremely durable dipping. In conformity with: EN388:2016 4.X.4.3.F
Ultra-lightweight design (20% lighter than standard CUT D), without the addition of aggressive materials. 3x greater cut resistance (compared to other gloves made from the same material) using INTERCEPT cut resistance technology. 20% greater abrasion resistance thanks to FORTIX technology. Touchscreen, antistatic, EN16350, FOOD APPROVED. Sizes: 5-12 Complies with: EN388: 4X43D, EN407: X1XXXX
Gloves with blue nitrile layer on a jersey lining. Palm coating and safety cuff. Excellent abrasion and cut resistance, very good grip when working with oil and greases. Flexible, comfortable and ideal for use in automotive, construction and metal working industries. Application: heavy working conditions. Sizes: 8-10.
Cut resistant glove made of HPPE and a black, abrasion resistant nitrile foam coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A light weight glove, high dexterity, touchscreen compatibility and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.3.4.2.C, EN407:2020:X.1.X.X.X.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With extra long cuff. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 11.
Seemles knitted nylon-spandex gloves (15 gauge) with insulating layer foam nitrile on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Superb protection against cuts and abrasion, successor of Hyflex 11-630
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility, brought together in a winter glove.
Cut resistant glove for cold applications. This soft, flexible and breathable glove, with nitrile coating, had as enhanced grip in wet and dry conditions. Highest cut protection (level F) and protection against short contact with temperatures up to 250°C. Soft inside acrylic terry liner in hi-viz orange. Glove can be used in extreme cold applications, cold storage, metal fabrication and general maintenance. EN388: 4X43F / EN407: X2XXXX / EN 511: X10
Gloves in soft jersey lining with natural rubber coating. Comfortable, smooth latex for excellent grip on wet and smooth items. Also insulates against cold.
Welding gloves made of grey cowgrain leather with 15 cm protective cuff and cowsplit leather backing. Safe seam reinforcement around the fingers. Sizes: 10.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. Oeko-Tex standard 100. DMF free, with impact protection on the back of the hand. Sizes 6 - 11.
Fully nitrile coated glove. Flexible and close-knit glove for excellent grip in wet and oily conditions. Unique: Also checked for food contact. Available in sizes: 7, 8, 9, 10 and 11.
Gloves with five fingers, American cut. Palm, fingers and inside of thumb are made of para-amide coated interlock.. The gloves are fully lined with an acrylic/cotton felt. Elastic cuffs, finished with bias binding. The seams are stitched with a para-amide thread, overall length is 50 cm.
Seamless liner of cotton/polyester, roughened green latex coating on palm and fingertips.
Seamless glove with nitrile 3/4 coating. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Nylon carrier.
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The glove is fully coated with a double coating layer in the palm, for adequate protection against liquids and oils. Approved for contact with all types of food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X
Highly abrasion resistant nitrile coating on a nylon-spandex liner, with impact TPR protection on the back of the hand and fingers.
Dark cut resistant glove made with the latest Dyneema® Diamond technology and a black, abrasion resistant PU coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A "breathable" glove, tactile, touchscreen compatible, electrostatic properties and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.X.4.3.C, EN407:2020:X.1.X.X.X, EN16350
Glove made of cut-resistant HDPE material with PU coating. Very finger sensitive. Sizes: 6-11.
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility.
Polyethyleen/composite yarns knitted glove with double nitrile coating. First orange coating liquid proof full dipped. Second palm coating in black nitrile foam. Sizes: 6-11.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating provides a good grip. 15 gg liner and extra reinforcement along the thumb and index finger. Cut protection level D, approved for contact heat up to 100°C for max.15 sec. Approved for ESD and food safe. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.D, EN407: X.1.X.X.X.X
