BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 10,000 volts, operating voltage of 7500 volts. Length 41 cm, Sizes: 7-12.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a liquid-tight palm and an airy top. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Solution for users looking for a glove that keeps hands warm and dry, protects them from contact heat, and offers high protection against cuts.
Cut-resistant gloves with Hagane coil liner in combination with the nitrile foam coating on the palm provide a good grip and optimum protection against cutting wounds in both dry and humid environments. Sizes: 6-10.
Fully lined, comfortable glove from the Arctic series. Made for the cold and harsh conditions. A quality glove with a long cuff, removable liner, waterproof membrane, snow closure, carabiner, wrist fastening and adjustable Velcro strap at the wrist. Soft goat leather for superior comfort, touchscreen function and reinforcements in the palm. Size 7-12. Complies with: EN388:2016 3.1.2.2.X, EN511: 3.3.1, EN407: X.2.X.X.X.X
• 15 gauge grey Kyorene® graphene liner • Full blue nitrile coating with black HCT® micro foam nitrile palm coating for superior oil and water resistance • Bacteriostatic kills harmful bacteria • Thermal regulating to keep the hands comfortable • Odor neutralizing to keep the gloves smelling fresh • DMF and silicone free
Impact resistant glove for demanding environments. Large back coverage. Touchscreen. High visibility colours for improved hand gestures. Conforms to EN388:2016: 4.X.4.3.D.P, EN407:2020: X.1.X.X.X.X
Winter glove, outer layer in polyester, 13 gauge. Waterproof membrane. Polyacrylic lining. Nitrile foam coating. Touchscreen. Oekotex certified. Sizes: 7 to 11 Conform: EN388:2016: 3.X.2.1.C EN511: 1.2.1
High-cut chemical glove. Strong grip. 18-gauge HPPE liner. FOOD approved Sizes: 6-11, length: 350 mm. Compliant with: EN388:2016 4.X.4.3.F, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 EN407: X1XXXX
Powder-free and latex-free nitrile disposable glove, accelerator-free to reduce the risk of type IV allergies. Non-slip textured surface for excellent grip and precise object handling. Long cuff for optimal protection. Food approved. Thickness: 0.11 mm. Length: 290mm Sizes: 7 (S) – 11 (XXL) Packaging: 100 pcs/dispenser box. Sizes 10–11: 90 pcs/dispenser box Complies with EN 455‑1/2/3/4 for non-reusable medical gloves. Conformity: EN 374: TYPE B: JKT – VIRUS – EN 421
Liquid-proof gloves made of jersey coated with high-quality neoprene. High mechanical resistance and resistant to a wide range of ch emical products.
Cut resistant gloves with Kevlar® liner in combination with roughened latex coating offer good grip and optimal protection against cutting injuries in both dry and damp environments. Sizes: S / M / L / XL. Available in: blue.
Gloves with chemically resistant coating consisting of 7 layers. Can also be used as liner gloves. Extremely supple and ergonomically formed model. Offers protection against an exceptionally wide range of chemical products and solvents. Silicone and latex free. Working temperature: -40°C to 70°C
Heavyweihgt working glove in piggrain leather, collar model, specially-sewn thumb, cotton back and cuff. Extra small end extra large sizes : 4, 7-13.
Antivibration protection for building and construction applications. Synthetic glove with premium PU in the palm. Damping foam for excellent anti vibration performances. Ventilation between the fingers. Exellent fit and preformed hand shape. Sizes: 7-12.
Loggers working gloves with mechanical resistance in 100% goat leather with nylon and spandex inserts in red color. They provide great dexterity and grip. They have a perfect fit, and impact and vibration foams in the palm of the hand. Sizes: 8-12.
Fully lined, comfortable glove from the Arctic series. Made for the cold and harsh conditions. A quality glove with a waterproof membrane, adjustable Velcro strap at the wrist and a pull tab at the cuff with an opening for the carabiner. Soft goat leather for superior comfort, touchscreen function and reinforcements in the palm. Size 7-12. Complies with: EN388:2016 3.1.2.2.X, EN511: 3.2.1, EN407: X.2.X.X.X.X
Navy blue disposable nitrile glove. Powder-free and accelerator-free. Ambidextrous, with roughened fingertips. Designed for use in l aboratories and research environments.
Top quality welding glove made of black analyne leather on palm and back and lined cuff of 15cm in super split leather for even better heat resistance. This glove is super comfortable and has a good dexterity. The palm is extra reinforced, which increases the durability of the glove. With kevlar seams.Glove can be used for MIG/MAG and electrode welding. Available color: black/gold Available sizes: 10, 11
This glove offers excellent grip in dry, wet and slightly oily environments. Coated knuckles and triple nitrile foam palm coating for a solid oil barrier. Lining with 18 gg knitting technology and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 4.1.1.1.X - EN 407:2020: X.1.X.X.X.X
Navy blue disposable nitrile glove. Powder-free and accelerator-free. Ambidextrous, with roughened fingertips. Designed for use in l aboratories and research environments. Version with long cuff.
Vibrothan® foam technology for optimal vibration dampening protection. Excellent durability and grip performance due to Microthan® synthetic leather. Vibration reducing according to EN ISO 10819, Reinforced index finger and little finger, Reinforced seams, Reinforced fingertips, Padded palm, Pre-bent fingers, Specially designed thumb, Ergonomically shaped, Specially designed details. Sizes: 7-12 EN388:2016 2.2.2.2.X
Knitted glove made of HPPE and cobalt (without fiberglass), 13 gauge. Double RGO GRIP coating (nitrile + microfoam-nitrile) on the palm and three-quarters of the back. Elasticated wrist. Touchscreen. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D, EN407:2004: X.1.X.X.X.X
Light seamless glove with micro-porous nitrile coating on the palm (0.84mm). Finger-sensitive with good grip on wet or oiled components. Ultralight (19g) Microfibre carrier. Latex-free. Sizes: 6(S)-10(XXL).
Ansell HyFlex 11-814: Ultra-thin, breathable work glove with exceptional sensitivity, strong grip, and excellent comfort – ideal for precision work. 18 gauge. Nitrile foam coating. Sizes: 5-12 Compliant with: EN388: 3121A
Glove with high cut protection (51N) and latex coating for excellent grip. Leaves no marks on surfaces. Sizes: 7-11 Compliant with EN 388 3X43F, EN407:X2XXXX
Gloves with roughened rubber coating on interlock lining with open back and tricot cuff. Good cut resistance and very good grip on dry and wet or smooth surfaces.
Carrier: Nylon / Dyneema® with roughened nitrile coating. Nylon inner glove for better comfort. Waterproof. Protection up to 500BAR. Sizes: 9 and 11. In line with EN388: 4.5.4.4
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
Chemical protection glove, PVC (Vinyl), Cotton, Seamless, Sandy finish, Cat. III, Blue, Extra long 70cm, for heavy work. Sizes: 7-11.
Seamless knitted polyamide/elastane grey glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 25 seconds). Suitable for handling, and precisionwork in dry and oily conditions. Sizes: 7-11.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for extra wide arms. Lenght 40 cm.
Cut and impact resistant apron in water and oil repellent split leather. Lining in Tekinox for maximum cutting resistance. Adjustable neckband with velcro closure. Length: 80 cm Width: 62 cm.
Glove with excellent grip in oily environments, preventing slippage and injuries. Coated knuckles and triple nitrile foam palm coating for a solid oil barrier. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.2.C, EN407:2020: X.1.X.X.X.X
Seamless knitted nylon glove with white PU coated fingertips. For microelectronics, packaging, archiving and precision work. Sizes: 6, 7, 8, 9.
5-finger gloves, palm and back in water and oil repellent cowsplit leather, inner lining of reinforced TEKINOX. Sizes: 11. Application: tasks with extreme risk of cutting, heavy industrial activities. Standards: EN388:2016 4.X.4.4.F, EN407: X.1.X.X.X.X
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 305 mm.
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
Heat-resistant glove, Cotton, Nitrile-dots, Dots. Withstands contact heat up to 250°C, Extra long, for allround work. EN 388:2003 1.2.3.2 EN407 0.2.X.X.X.X
Durable un-lined glove in synthetic leather with great dexterity and a good grip. The pre-shaped fit makes the glove comfortable and flexible, an elastic at wrist and a half-length cuff to ensure that the glove stays firmly in place. Sizes: 6-13.
ARC FLASH APG TX MIDDLE SIZED GLOVES. For maintenance and repair of electrical installations. In siliconised calf leather (palm). 100% Kevlar® tricot interlock (back). Protection against thermal and mechanical hazards. Tested with 7kA / 0.5 s ARC test
The 100% nitrile glove provides protection against a wide range of oils, solvents and chemicals. The diamond grip surface finish increases grip wet road surface for more convenience and safety. Length 33cm, thickness 0.15mil Sizes: 7(S)-11(XXL)Conform: EN388:2016 4.1.0.1.X, EN ISO 374-1:2016 Type A: AJKLOPT, EN ISO 374-5:2016 VIRUS
High-quality welding and heat protection sleeve with elastic upper part and additional hook-and-loop fastening for a secure fit. The soft, pre-shaped textile makes the sleeve highly flexible and ensures a comfortable fit around the arm. The sleeve provides excellent protection against ambient heat and is certified for contact heat level 2 (250 °C). Suitable as a versatile sleeve for TIG, MIG and MAG welding. Suitable for both right and left arm. Sizes: M to XL Complies with: EN388: 2222X – EN407: 423234
HPPE glove, gauge 18. Nitrile foam coating on palm and fingertips. Wrist with elastic tightening. Ideal for precision work. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.2.1.B
Five-finger glove in Kermel terry cloth with wool fleece lining, short-term contact with 500°C, long cuff in split leather, Kevlar s titched, length 40 cm.
Powder-free and latex-free nitrile disposable glove, accelerator-free to reduce the risk of type IV allergies. Non-slip textured surface. Food approved. Thickness: 0.11 mm – Length: 240 mm Sizes: 7 (S) – 11 (XXL) Packaging: 100 pcs/dispenser box. Sizes 10–11: 90 pcs/dispenser box Complies with EN 455‑1/2/3/4 for non-reusable medical gloves. Conformity: EN 374 – TYPE B: JKT – VIRUS – EN 421
PowerFlex®+ 80-602 glove is the practical answer to the safe handling of glass, metal and plastics. It offers exceptional cut resistance and robust overall mechanical performance, plus superior comfort. In both wet and dry conditions, this glove grips superbly. The PowerFlex® 80-600 is truly a unique glove solution that provides the highly efficient combination of protection plus natural dexterity.
Polyvinyl alcohol coated gloves with knitted cotton lining. Idea for processing aggressive chemicals and strong organic solvents. Virtually no reaction with aromatic and chlorine-containing solvents. Due to coating, the gloves are not suitable for working with water-based solvents!
Acrylic lining without seams, PVC coating, thickness 1.1 mm, length 30 cm. The lining protects against cold (up to -20°C), is comfortable and efficient. The PVC is highly resistant to most chemical products. Good tear resistance. Washable at 40°C with a neutral detergent. Sizes: M(8)-XL(10).
Goat leather combat glove combined with heat resistant materials from Nomex / Kevlar intended for special operations for intervention services and riot police. Knuckle protection, palm grip, thumb protection, closure with Velcro. Sizes: 8-11. In line with EN388: 3.2.3.2, EN407: 4.1.X.X.X.X
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 30,5 cm.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for narrow arms. with thumb hole Lenght 30 ,5 cm.
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing.Sizes: 8-11. Thickness: 1,5mm, Lenght: 360mm Certified for resistance to acid (Category A), Ozone (Category Z) and very low temperatures (Category C).
A very thin and flexible nitrile-dipped ESD glove for ESD-protected work areas where maximum dexterity is needed. The glove has touchscreen functionality, ensuring seamless transition between duties without having to remove the glove. Thin 18 gg fibre and highly breathable to ensure all-day comfort. CAT II . In line with : EN ISO 21420:2020 - EN 407:2020 X 1 X X X X - EN 16350:2014 R <(><<)> 1,0 x 10⁸ Ω - EN 388:2016+A1:2018 4 1 1 0 X - IEC 61340-5-1:2016 R <(><<)> 1.0 x 10⁹ Ω
Versatile tactical winter glove designed to enable weapon operation and precise frisking. Slim all-round fit and exceptional dexterity. Windproof and water-repellent durable softshell fabric with fleece liner, TPR reinforcements, touchscreen compatible.
Strong hook and loop fasteners with universal systemfor molle or belt. Perfect for plate carriers, backpacks and all belt systems. Easy to open and close with additional tab, multi-purpose system for gloves, ropes ,...
Soft and versatile glove with cut protection (level C/ANSI cut A3), made from recycled polyester and bio-based Dyneema® fibers - an innovation that limits dependence on fossil raw materials. Good for the environment! 13 gg knitting technique with touchscreen function - use your smartphone with gloves on. Less water consumption due to the new nitrile foam coating. Sizes: 6-11. Conforms to: EN 388:2016: 4.X.4.2.C and EN 407:2020: X.1.X.X.X.X.
Very soft, durable assembly glove made from recycled polyester. One pair is equal to a 0.5l PET bottle. The glove is 15 gg knit, contains spandex and has a new nitrile foam coating that uses less water in production. Touchscreen function - operate your smartphone with gloves on.. In line with : EN 388:2016+A1:2018 4121X - EN 407:2020:X1XXXX
Flexible and comfortable butyl rubber glove with rough finish. Provides exceptional chemical resistance to toxins, alkalis and acid, esters and ketons, UV rays and ozone, hydrogen peroxide, desinfectant solutions, oxidizing chemicals. Gastight and latex free. Lenght: 35cm, Thickness: 0.7 mm. Sizes: 7-11.
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass
Blue nitrile disposable glove providing excellent protection against chemical splashes. Textured fingertips. Food approved and touchscreen compatible. Extended cuff. Thickness: 0.20 mm Length: 295 mm Sizes: 7–11 Compliant with: EN 374‑1: Type A JKLOPST, EN 374‑5: VIRUS, EN 421
