BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating provides a good grip. 15 gg liner and extra reinforcement along the thumb and index finger. Cut protection level D, approved for contact heat up to 100°C for max.15 sec. Approved for ESD and food safe. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.D, EN407: X.1.X.X.X.X
Chain mail glove made of 100% stainless steel. The closure at the wrist is made with a polyurethane band and press-stud for optimal hygiene and comfort. Reversable and maximum protection against cutting injuries. The wrist band has a different colour for each size.
A flexible glove with cutting, perforation and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and fingertips from needles and other sharp objects. Knitted in cut-resistant HDPE fibre, giving the whole glove protection level 5. Provided with PU coating from fingertips to over knuckles and therefore suitable for cleaning or working in wet conditions. Extremely wear-resistant coating. Sizes: 8-11.
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 305 mm.
Natural latex glove, good grip, lined inner, freedom of movement: excellent comfort thanks to the textile inner (seamless work surface), very high tear resistance, very good resistance to various acids and ketones. Applications: Chicken breeding, vegetable cultivation, perfume production, polyester lining, masonry work, and ink and dye production. Length: 31 to 33 cm (depending on size). Thickness: 1.15 mm. Sizes: 5-10.
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 0: operating voltage 1000V, test voltage 5000V, special properties R (acids, oil, ozone) and C (low temperatures) .With 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-12.
Cap glove with wrinkled rubber coating on an interlock liner, 31 cm long. Provides good cutting resistance and has a very good grip on dry and wet or smooth surfaces. Ideal for work with glass, roof tiles, ceramic, tin plates, smooth plastic, ... Sizes: 7-10.
A versatile antistatic and latex-free glove with superior cut-resistance and mobility. The exclusive Intercept lining of the glove ensures maximum safety and productivity. The glove has optimal fit and flexibility due to the elasticity of the lining and the elasticity of the coating in nitrile foam. This coating has a breathable character to keep the glove comfortable throughout the day. The Hyflex CR is resistant to heat and scattered molten particle and can therefore be used in various work conditions. Suitable for manipulation and assembly applications in metallurgy, the automotive industry (press department, body department and welding department), the glass industry, the plastics sector. Length 240 mm.
- Dexterity and robustness - Cold protection and heat contact resistance - Latex coating on the palm with excellent grip - Respects the natural shape of the hand - 10 gauge - Sizes: 7(S) - 11(XXL) - EN388:2016 3.X.4.2.B - EN511:2006 X.1.X - EN407:2004 X.2.X.X.X.X
White gloves made of heavy cotton. Sensitect gloves have a perfect fit,and are ergonomic and extremely comfortable due to the Interlockquality. Can be worn either as a liner glove or for product protection.
High quality cow grain leather glove (beige) with pistol reinforcement on the palm in cow split leather. If you need a solid glove with very good grip, this is the ideal solution! The glove is fully lined with a very comfortable cotton lining and has an extra long rubberized cuff of 10 cm for better protection of the forearm. The glove reaches outstanding mechanical results and is available in a lot of sizes. Sizes available: 8-12. The gloves are designed to use in the construction sector, transport and distribution. Conform: EN388: 4.2.4.4
Supple, comfortable and chemical resistant gloves made of butyl covered with a layer of Viton with smooth finish. Provides exceptional chemical resistance to toxins, alkalis and acid, esters and ketons, UV rays and ozone, hydrogen peroxide, desinfectant solutions, oxidizing chemicals, non-polar hydrocarbons and aromatics, halogenated hydrocargons, and oils and greases. Gastight and latex free. Lenght: 30cm, Thickness: 0.35mm. Sizes: 7-11.
Glove with arc flash protection for the toughest conditions in Cow split leather and goat grain leather. Lined with heat-resistant aramid fibres, which also provide cut protection. The entire outside of the palm is equipped with reinforcements, for extra protection. With safety cuff and double heat-resistant seams. Provides protection against splashes of molten metal, and is also suitable for MIG/MAG welding. Sizes: 7-12. Complies with: EN388:2016 2.X.4.3.B, EN407: 4.1.3.2.4.X, EN12477 Type B, ASTM F2675 Cal.14 ATPV2.
The ideal solution to mitigate static buildup when working with chemicals and liquids in environments with static hazards or high ex plosive risks. High performance Nitrile compound offers a far superior snag, puncture and abrasion protection. Reverse lozenge palm finisch for improved dry and wet grip. Foldable cuff gutter to prevent dripping on the forearm. Antistatic flocking layer for ease of donning/doffing and moisture management. Without Silicone. Sizes: 7-11.
Comfortable white nylon liner combined with a tough nitrile coating featuring Ansell Grip Technology that reduces the amount of force needed to get a firm grip on oily objects. Provides high protection against bases, oils and some types of solvents and greases.
Talcum powder for electro gloves. Helps when pulling on gloves and absorbs transpiration. No PPE.
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin, Full grain goatskin, Reinforced index finger and reinforced seams.
Seemless knitted nylon/spandex gloves (18 gauge) with foamy insulating layer nitrile on the palm. Ultra-thin ergonomic design provides extreme tactility to handle small parts easily. It is dermatologically tested and solvent-free and is Oekotex certified for no harmfull substances. Fortix™ Technology delivers extended wear time. They are particularly suitable for light assembly applications in industries such as automotive, plastics, textiles and finished products, and for the needs of logistics and warehousing. Sizes: 6-11.
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s PU coating provides good grip. 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level D, approved for contact heat up to 100°C (15 sec), ESD and Touchscreen compatible. Sizes: 6-12.
Gloves with a supple neoprene coating. The knit cotton lining provides excellent perspiration absorption. Good grip in damp conditions. Antistatic Sizes: 8 / 9 / 10, length: 30 cm. Antistatic.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X.
Gloves for all lengthy work activities involving chemicals, heat or cold. Neoprene on a double cotton liner. Temp-Tec 332 can be used for the manipulation of oiled, hot parts up to 250 °C. Available in: blue/black. Sizes: 8 / 9 / 10, length: 35.5 cm.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 40 cm.
The new generation of working gloves offering maximum grip with maximum impact protection. Abrasion resistant nitrile foam coating provides exceptional grip in dry environments as well when working when ther is water, grease and oil contact. Lightweight and breathable seamless liner (13 gauge) with Hook <(>&<)> Loop strap for secure fit all day long. Sizes: 7(S) - 12(3XL).
Biodegradable single use glove, powder free.
Cut resistant glove on seamles knit liner in renewed HXFIBRE (18 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 12.
Gloves designed for work in cold working conditions. The combination acrylic/cotton/polyester in the seamless liner combines a light weight with warmth and suppleness. The roughened latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: S / M / L / XL.
Strong, ambidextrous blue knitted (13 gauge) gloves made of Intercept Technology® that delivers the highest cut protection level F throughout entire glove and cuff, even after laundering. More durable and stain masking designed for extende use life. Suitable for food processing and services.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (15 gauge) with insulating layer nitrile foam/aqua PU in the palm with longer cuff. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The nitrile coating in the palm provides excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 5-11. Complies with: EN388:2016 4.X.4.3.C, EN407: X.1.X.X.X.X
The SHOWA 8005PF is designed for jobs requiring increased protection without compromising on comfort and tactility. A rolled cuff prevents dirt from entering the glove and allows for easy removal of the glove in case of puncture. The glove is ambidextrous and uses second-skin feel to significantly reduce hand fatigue over long periods of wear. Powder and latex free, food approved. Sizes: S(7)-XL(10).
Glove made of green grain leather and aramid thread for protection from cut wounds. With 2-hand protection against chain saws.
Synthetic glove, Nitrile, 3/4 dipped, Acrylic, Polyester, 10 gg, 13 gg, Sandy finish, Cat. II, Yellow high-viz, black, High-viz colour, Water and oil repellent palm and knuckle, for allround work . EN 388:2003, 4331 EN 511:2006, 02X
Seamless knitted glove in yellow high-viz cut resistant ATA® fibres, with double palm and finger coating in nitile Microfinish®. Excellent cutting resistance and good grip in dry, wet and oily condtions. Available in sizes 6, 7, 8, 9, 10 and 11.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and supple model (18 gauge) has a double coated palm for total liquid protection. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and touchscreen function. Sizes: 7-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
ESD working glove seamless knitted 15gg, tight fit, with rolled knitted cuff. Touch screen compatible. PU coating on fingertips. Very comfortable. Sizes: 5-11.
Flexible and close-fitting glove made of Guide HXFIBR material that offers cut protection and excellent dexterity. With nitrile coating on the palm for good grip, with high-visibility orange TPR/TPU impact protection on the back. Sizes: 6 to 12 Compliant with: EN388: 4X42DP, EN407: X1XXXXX, EN16350, EN 61340-5-1
Glove with flexible nylon carrier and nitrile foam coating with anti slip design. Glove is very pleasant to wear and thus provides increased comfort. Excellent grip in oily conditions thanks to the foam nitrile coating with anti-slip design. Available in sizes 6, 7, 8 and 9. In line with EN388 3.1.2.1.
Guide 6402 CPN offers a unique combination of maximum protection against needlesticks and cuts while maintaining flexibility and comfort. This model is the latest innnovation with needle and cut protection in the palm area. Kevlar in dark gray for heat resistance and cut protection is used on the back of the hand. Suitable for police and security forces when there are risks of cut, puncture and needle injuries. Great grip and tactile feeling. Sizes: 7-12.
A warm and durable glove in our Freez range, well suited for cold environment work and freezer. The Guide GTX - Armor reinforcements in palm, fingertips, thumb and indexfinger makes the glove really durable. The elastic at wrist and the lined part towards the knitted cuff prevents cold air from entering the glove. The extra lining on back of hand gives this glove an exellent cold protection. Touchscreen at fingertips back of hand. Size 7-12.
Chemical glove for precision and medium duty work in cold conditions. Dipped in a two-layer liquid proof NBR/PVC blend. 35 cm long safety cuff. 18gg nylon liner combined with an acrylic winter lining for cold environments. Sizes: EN388:2016 4.1.4.1.X, EN511: 0.2.1, EN407: X.2.X.X.X.X, EN ISO 374-1:2016 Type A: JKLMNOPT, EN ISO 374-5:2016 Virus
Soft yet robust technical liner, engineered to offer protection against the cold and heat, as well as cut level A4/D protection Exceptional anti-wear properties and double protection against thermal hazards. Extremely durable latex coating with increased resistance around the thumb for extended use. Conform EN388:3X43D EN511: X1X EN407: X2XXXX
Innovative impact protection and cut resistance glove offers protection against liquids combined with superior dexterity for ultimate comfort in a variety of applications. TPR impact protection on top of the hand and along the entire length of the fingers. Patented double coating technology. Full nitrile coating with smooth finish for liquid resistance. Half nitrile palm coating with sand grain finish for extra grip on wet and dry surfaces Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Sizes: 7-13. Complies with: EN388:2016 4.X.4.4.F.P
Seemless knitted glove 18 gauge with nylon, spandex, carbon fibres and a FORTIX™ foam nitrile coating on the palm. This glove has ES D-functionalitye certified to EN16350, protection products against electrostatic discharge. It is also touchscreen compatible and dermatologically approved by Dermatest and certified by OEKO-TEX®. The nitrile foam coating offers excellent grip and long lastingprotection. The careful selection of materials, the Ansel ZONZ™ Comfort Fit Technology and proprietary washing process makes the HyFlex® 11-819 a clean, ultra breathable and highly comfortable glove. The glove is latex and silicone free, and laudryable at 40°C. Sizes: 6-11.
Durable, heat resistant Kevlar glove with heavy coton liner, 35 cm long. Cut resistant and isolating till 350°C.
Seamless cut resistant glove with double nitrile coating on the full glove. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Cut resistant S-TEX liner (steel/polyester ,nylon). Sizes: 6 (S) - 10 (XXL)
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Thin and comfortable shock-absorbing glove with cushioning Poron material in the palm and on the underside of the glove.
Class 2 welding protection, elasticated cuffs for a secure fit, designed to be worn in a harsh working environment, designed with a comfortable fit, CE certified, this product is sold in pairs, UKCA marked. Outer fabric: split cowhide, thickness 1.3 mm Sizes: one size Standards: EN ISO 11611 Class 2 A1
This glove is specially designed to protect against liquid gases at very low temperatures. The Gore-Tex membrane ensures water-tightness. American assembly. The cowhide leather is oil and water repellent and heat resistant. The glove has a 20 cm long cap-cuff and is lined in wool.
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, impact protection on the back of the hand and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass.
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
5-finger glove with palm in split leather and aluminized back. Wool lining. Kevlar seams. Glove with contact heat up to 100°C. Materials are resistant up to 250°C. Length 40 cm.
Cut resistant lined welding glove made of durable soft goat leather with Kevlar seams.
Welding glove made of high-quality split cowhide leather with cotton lining and heat-resistant Kevlar seams.
Extreme chemical protection: MICROCHEM™ multi-layer barrier. Utilizing unique rubber polymer and plastic laminate technology for extreme protection against a wide range of chemicals. Approved for contact heat up to 100°C/212°F, antistatic according to EN 1149-3 standards and made without natural rubber or silicone, for protection against mechanical risks and allergic reactions. Comfortable unique manufacturing process and nylon liner support for more comfort during use
Liquid-tight, black gloves made of neoprene. Freedom of movement due to flock-lined cotton lining. Better grip due to non-slip finish. Good chemical resistance to acids and solvents.
Powder-free nitrile gloves for single use. Fingertips with relief. Light blue colour. Lenght 30 cm, thickness 0.11 mm.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colour: blue.
Leather glove, Unlined, 0,6-0,7 mm, Full grain goatskin, Nylon, Cat. II, Blue, white, Elasticated 180°, for fine assembly work . EN 388:2003, 2010
Soft flexible liner offering suppleness and dexterity. Excellent tactile sensitivity with superior comfort. Anatomically engineered, reducing hand fatigue and increasing comfort. Excellent grip performance for safe handling in dry-to-oily applications. Sizes: 7-11. Complies with: EN388:2016 4.1.3.1.X
PowerFlex®+ 80-602 glove is the practical answer to the safe handling of glass, metal and plastics. It offers exceptional cut resistance and robust overall mechanical performance, plus superior comfort. In both wet and dry conditions, this glove grips superbly. The PowerFlex® 80-600 is truly a unique glove solution that provides the highly efficient combination of protection plus natural dexterity.
Cold insulating glove with foam insulation and PVC coating. The roughened finish provides excellent abrasion resistance. This fluore scent, supple and ergonomically shaped model features a protective cap and is completely impervious to liquids. It is also dirty, fat and water repellent. Ideal in the chemical and petroleum industry and for work in cold stores, ports, public services or other env ironments where protection against cold is required. Anitstatic. Length: 27.5 cm.
The full nitrile coating repels oil and liquids keeping hands dry and protected, whilst the new micropore nitrile palm coating ensures excellent grip in both dry and oily conditions. Conform EN3 88: 2016 level E cut resistance in such a fine touch, lightweight glove is unrivalled in the market place. Available sizes: 6-11.
