BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
WorkAir by D-Air Lab is the first PPE-certified airbag system for workers at height. Designed and manufactured entirely in Italy, the system protects back, chest and vital organs by inflating within 40 milliseconds in the event of a fall. It can be used without fall protection from 1.2 m to 2 m, and above 2 m in combination with a fall arrest harness. WorkAir uses the "Intelligent Clothing" technology developed by Dainese for motorbike racers and skiers. It is lightweight, comfortable and ergonomic. Also available in Fluo yellow and Fluo orange.
Temporary horizontal lifeline in 16mm core jacket rope to be used with 2 container anchor posts Conte Post (1061610). Suitable for 1 or 2 users. At each end of the lifeline is 2m of red rope, intended to prevent access to hazardous areas (container ends). Supplied with 2 salen triple action locking musketon hooks and a transport bag. Total length: 14m, minimum length: 5m. Static strength: 18kN, minimum breaking strength: 23kN.
Fall harness with 2 anchor points and integrated hiviz orange safety vest with refelctive straps. Maximum user weight: 140kg.
Atex fall arrest block with steel cable and integrated rescue winch. Can be attached to tripods 1063976/1062545 using adapter 1063981. Maximum user weight: 140 kg (vertical use).
- Fall arrest device 6 meter strap 25mm - With internal fall damper - Carabiner with fall indicator - Plastic housing - Weight: 2.33 kg - Max user weight: 140kg
Safety harness with 2 anchor points, adjustable shoulder and leg straps. Equipped with automatic buckles. Shoulder and thigh straps are color-coded. Max. user weight incl. equipment: 140kg.
Descender for safe descent of 11 mm kernmantle rope. Equipped with a double safety: clamps the rope if the lever is not pressed or i s pressed too far. This prevents unintended descent in a panic situation. Opening at the bottom to be connected to the harness with a safety line.
Ascender for left-handers for use on 8-13 mm kernmantle rope. Ideal for climbing rope in combination with a foot loop. Has two openi ngs at the bottom: one for the foot loop and one to be connected to the harness with a safety line. Can also be used to gain a bette r grip when pulling up a rope.
Ascender for right-handers on 8-13 mm kernmantle rope. Ideal for climbing rope in combination with a foot loop. Has two openings at the bottom: one for the foot loop and one to be connected to the harness with a safety line. Can also be used to gain a better grip when pulling up a rope.
Manual winch to facilitate casualty retrieval. Can only be combined with the Rollgliss R350 with rope control device and the AM100 tripod. Weight: 4 kg.
Bag for tools that can be attached to harness. Made of solid plastic with transparent section for easy use at height. Content 7.4L.
Very robust fall-prevention device, 9 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 9 kg.
Fall-stop device 2.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for extremely sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Double fall-stop device 2.5 metre strap with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Also useful for fall factor 2.
The 3M™ DBI-SALA® Utility Pouch is constructed from heavy-duty 22 oz. duck canvas and features two side ears that are designed to hold spud wrenches and sleever bars. Two inner pockets are included in the pouch for additional tools. Tools can be tethered to two D-rings on the front of the pouch, or to an additional D-ring inside the pouch.
Case in neoprene for roller meters. Fits most roller sizes. Provided with a clip to attach to a belt strap or holster. Ideal when working at height Not PPE.
Harness for heat applications made from Nomex on Kevlar carrier with 2 anchoring points. Combustion temperature 425°C. Easy to put on due to delta shape on the back. Test weight: 140 kg, Sizes U-XL.
Fall arrest block Rebel 25 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 13kg.
Fall-prevention device with 6 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Locking mechanism remains blocked even if there is a recoil effect after the fall (ideal for use with horizontal lifelines). Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical and horizontal use; if horizontal: 2-metre anchor loop must be used (Art. 1026475).
Descending and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably to be used with seat harnesses. Ideal for enclosed spaces.
1/2 day training anti-fall protection by 3M (Capital Safety) at the training center of 3M.
U-shaped base for Davit arm. Width adjustable from 1,9m - 2,6m.
Wall base for davit arm with boom. For permanent attachment to concrete or a metal construction. Opening for davit fitted with hard PVC sleeve to allow davit arm to pivot more smoothly. Dimensions: W25.4 x D 19 x H 32,4 cm. Other feet or mobile bases for the davit arm are available on request.
Davit mast 533 mm, to be combined with boom, base, fall-block and/or descent winch and accessories.
Floor base for davit arm with boom. For permanent attachment to concrete or a metal construction. Opening for davit fitted with hard PVC sleeve to allow davit arm to pivot more smoothly. W 30,48 x L 30,48 x H 24.1 cm. Other floor bases or a mobile base for the davit arm are available on request.
Fall arrest device Rebel 12 meters galvanized steel cable with integrated shock absorber. Plastic housing. Stops any vertical falling movement almost immediately. Serves as a connection between anchor point and harness. Equipped with ergonomic cable handle and carabiner with fall indicator that allows you to know when a fall has occurred. For vertical <(>&<)> horizontal use.
Anchorage points designed to be installed on platforms, bridges, horizontal surfaces mad up of pressed steel gratings with min.mesh 30mm x 30mm. Simple light and easy to install. Designed to be used with a fall arrester system, but can also be used with work positioning or restraint system. Provided with 3 different lenghts of wire rope slings (250mm, 500mm, 750mm) as well as a 8,5m long cordd to facilitiate installation of the fall arrest system. Weight: 3,75 kg.
Lanyard, 2 meter length, consisting of elastic strap with integrated shock absorber. Fitted with one aluminium standard carabiner and one aluminium with big opening (60mm) and a fall indicator. Capacity up to 140Kg. Serves as connection between anchor point and harness. Suitable for use with sharp edges.
I-beam anchor for I-beams ranging from 100 to 330 mm. Suitable for 1 person and to combine with a fall arrestor or safety line. Atex approved.
Harness with two attachment points: on the back and on the chest and quick release buckles. Chest and back attachment point using D-ring. Leg and shoulder straps adjustable. Ideal for welding as raw material is Kevlar fabric blended with highly durable, heat resistant and flame retardant modacrylic fibres. Available in S, M/L or XL.
Retractable telescopic pole of glassfiber to attach the rescue line to the harness of a fallen person. To combine with carabiner 1056763 and the evacuation kit 1056761 in order to save a victim without to descend yourself. The snap closure is held in an open position. Lenght: 0,75 - 3m. Comes with a transportation bag.
Moveable anchor point designed for use on a low parapet wall. Easy to install without tools, does not damage the structure of the wall. For walls from 60 to 320mm thick. Suitable for 1 user.
Fall arestor 20-metre stainless steel cable, fully sealed housing, suitable for use in extreme weather conditions. With stainless steel musketon with fall indicator, convenient handle. Suitable for vertical use only. Max user weight: 140kg
Adaptation kit to attach fall arrestor kalypso 30m (1062543/1063980) with winch to tripod 1062545/1063976.
Aluminum tripod with two anchor points and one pulley in the head, adjustable height from 1.52m to a maximum of 2.9m. Weight: 15kg. Max. capacity: 500kg. Equipped with a built-in winch mount and supplied in a convenient carrying bag.
Ideal for installation and use on large structures (skydomes, trees, beam anchors, posts, etc.). Can be used with a horizontal temporary lifeline. Two elastic loops to hold the free end during use. Has a small Velcro strap to keep the lifeline coiled up when not in use. Minimum breaking strength > 24 kN.Static strength > 18 kN. Max length 5m, width: 45mm.
Automatic downward evacuation device for 1 person. Descent speed approx. 2m/sec regardless of weight (max. user weight: 141 kg). With 9 ,6mm kernmantle rope with 20m lenght and 2 carabiners, comes in a handy transport bag. To be used by 1 person.
Telescopic pole in fibreglass extendable from 2 to max 8M. Ideal for attaching a lifeline from the ground. Voltage resistance: 50kV. Forms an anchor point together with the musketon (1060634).
Aluminium musketon to be used with anchor lance (art.1060633) with jaw opening of 60mm. With eye to attach lifeline.
Mobile anchor point in stainless steel for temporary anchoring in a horizontally positioned metal profile. For anchoring only 1 person. May only be used for vertical applications. A 22 to 23 mm hole is required for installation.
- Fall arrest device with 10-meter stainless steel cable and rescue winch - With internal energy absorber - Carabiner with fall indicator - Plastic housing - Suitable for confined spaces - vertical use - Weight: 7.40 kg - Maximum user weight: 140 kg (vertical use) - EN360 - Atex - With adapter 1063982, it can be mounted on tripods 1063976/1062545
For rescuing victims without a harness. With four buckles for size adjustment and three metal D-rings for attachment. Universal size.
Atex fall arrestor with steel galvanised cable and integrated rescue winch, can be attached to Kratos tripod 1063976/1062545 using adapter 1062544. Max user weight: 140kg (vertical use).
Mobile and universal anchor point, for use by 1 person.
Double lanyard made of 11mm thick, sharp-edged kernmantel rope with self-locking aluminum hooks (2 scaffold hooks and one small carabiner). Maximum user weight: 140kg.
Rescue fork extendible to 4.8m to work from a distance, and allow a person who has fallen descend with a fall-block Ultra-lok RSQ. The descent button can be operated remotely.
Descent and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably to be used with seat harnesses. Ideal for enclosed spaces.
Winch for descents or rescue. Max load 204kg. To be used in combination with Davit-system or AM100 tripod. Handle to be used in 2 different ways (reduction 4 and 9:1). Best used in combination with suspension harness. To be used in confined spaces.
Very robust fall-prevention device, 15 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 12 kg.
Anchorage for I-beams ranging from 6.35 to 60.92 cm. Maximum thickness of I-beam: 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Free-standing counterweight anchor that can easily be placed on top of a roof to form a point of attachment for one employee. Includes sixteen cast iron weights of 20.3 kg, a base plate, a pole and a D-ring.
Mast adjustable from 1.20 to 2.13 m with rotating head <(>&<)> materials. Including bracket for a winch. Ideal for applications where where a tripod cannot be used. Can be suspended from anchor point in ceiling or other structure. Combined with base (Art: 1026260) and winch or fall-block.
T-shape base for extendible davit arm.
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Locking mechanism remains blocked even if there is a recoil effect after the fall (ideal for use with horizontal lifelines). Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical and horizontal use; if horizontal: 2-metre anchor loop must be used (Art. 1026475).
Compatible with all ISO certified containers. Provides an elevated anchoring point, allowing free fall requirements to be reduced. Provides a total fall protection solution, even for a single container. No tools or adjustments to container required. Height: 1.25m. Weight: 12 kg. Always combine with fall-block.
Safety line, 2 metres comprising belt with integrated shock-absorber. With 2 standard carabiner hooks. Hooks tested in such a way that the safety line may be positioned around a structure if the hook opening is insufficiently large. A combination of anchor loop and safety line is thus created. Serves as connection between anchor point and harness. With smaller, robust EZ shock absorber that provides shorter braking distance.
Double safety line, 2 metres comprising belt with integrated shock-absorber. With 2 standard carabiner hooks. Hooks tested in such a way that the safety line may be positioned around a structure if the hook opening is insufficiently large. A combination of anchor loop and safety line is thus created. Serves as connection between anchor point and harness. With smaller, robust EZ shock absorber that provides shorter braking distance.
Fall-stop device with 2 metre flame retardant strap with integrated shock absorber and 2 self-locking hooks. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
The 3M™ DBI-SALA® pocket holster with roll-up mechanism is a belt holster with a roll-up mechanism at the back. This holster is ideal for tape measures and other small hand tools. Not PPE.
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Extra lining on shoulder and leg straps for greater comfort and ease. Chest and leg straps fitted with quick release facility with lock. Reinforcement on shoulders to prevent wear. Straps made of dirt-repellent and abrasion resistant Repel webbing. Standard version with trauma loops on leg straps for deployment after a fall. Harness is very easy to put on. Integrated fall indicator.
Mast adjustable from 1.8 to 3.05 m with rotating head <(>&<)> materials. Including bracket for a winch. Ideal for applications where where a tripod cannot be used. Can be suspended from anchor point in ceiling or other structure. Combined with base (Art: 1026260) and winch or fall-block.
