BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Rescue and descent device with rotating wheel and 9.6 mm semi-static kernmantle rope for rescue or evacuation of you, a second person or any victim from height. The hand-wheel serves to lower or retrieve victims, can be used with an electric screwdriver. Maximum weight for 2 persons: 225kg. Suitable for rescue operations in hard to access locations and heights.
Semi-fixed height, single user mast. Semi-rigid masts have a limited (1.5 m) adaptability to optimize the anchor height during installation. Height: 4,6 m - 6,1 m. Offset/range: 3,7 m. PRICE WITHOUT TRANSPORTATION COST!
Semi-fixed height, single user mast. Semi-rigid masts have a limited (1.5 m) adaptability to optimize the anchor height during installation. Height: 5,3 m - 7,6 m. Offset/range: 3,7 m. PRICE WITHOUT TRANSPORTATION COST!
Fall arrest block Rebel 20 metres stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. Weight: 10kg.
Makes it possible to separate the mast from the base and transport it vertically with the forklift.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Width: 2,54cm, lenght: 5,48m. No PPE.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Sold per pack of 10. No PPE.
Height adjustable mast for 2 users. Height-adjustable masts can be easily adjusted using the integrated winch or with a drill fitted with a slip clutch (accessory). Height: 4,5m - 6,1m. Offset/range: 3,7m. PRICE WITHOUT TRANSPORTATION COST!
Removable counterweight box (without concrete) with built in fork pockets and lifting ring attachement points (sold separately). Inegrated leveling bubbles. Open mulit-directional base designed to accomodate a wide array of fork shapes and sizes. Dimensions: 2,06 x 1,7 x 1,86m. PRICE WITHOUT TRANSPORTATION COST!
Height adjustable mast for 1 user. Can be easily adjusted using the integrated winch or with a drill fitted with a slip clutch (accessory). Height: 3,8m - 6,1m. Offset/range: 2,3m. PRICE WITHOUT TRANSPORTATION COST!
Height adjustable mast for 1 user. Can be easily adjusted using the integrated winch or with a drill fitted with a slip clutch (accessory). Height: 5,3m - 9,1m. Offset/range: 2,3m. PRICE WITHOUT TRANSPORTATION COST!
Descent / evacuation kit with 10mm core rope equipped with a 5:1 reduction that makes retrieving or descending a person lighter. Rec ommended accessories, bag for storage (1061196), and rope clamp (1061197 or 1061199) for easier rope handling. Please note: usable length of rope should be divided by 5.
WorkAir by D-Air Lab is the first PPE-certified airbag system for workers at height. Designed and manufactured entirely in Italy, the system protects back, chest and vital organs by inflating within 40 milliseconds in the event of a fall. It can be used without fall protection from 1.2 m to 2 m, and above 2 m in combination with a fall arrest harness. WorkAir uses the "Intelligent Clothing" technology developed by Dainese for motorbike racers and skiers. It is lightweight, comfortable and ergonomic. Also available in Fluo yellow and Fluo orange.
WorkAir by D-Air Lab is the first PPE-certified airbag system for workers at height. Designed and manufactured entirely in Italy, the system protects back, chest and vital organs by inflating within 40 milliseconds in the event of a fall. It can be used without fall protection from 1.2 m to 2 m, and above 2 m in combination with a fall arrest harness. WorkAir uses the "Intelligent Clothing" technology developed by Dainese for motorbike racers and skiers. It is lightweight, comfortable and ergonomic.
Unique system: 2-point harness integrated in a backpack. Backpack has a separate compartment for storing a safety helmet and an extra compartment for storing a fall block or lanyard. The advantage is that everything stays together, and is ideal for inspectors who do not know in advance whether they have to work at height, and in this way are always provided with the necessary PPE. Backpack is equipped with auto-lock zippers that do not unzip further when the bag is partially opened, is equipped with reflective accents and waterproof.
Harness with secure steel quick-release buckles (cannot be accidentally opened), loops for lanyards when not in use, fall indicators, straight leg straps with soft padding, and elastic straps in the upper section for added comfort. Suitable for a maximum user weight of 140 kg.
Specially designed for working in environments with potential electrical hazards. Adjustable shoulder and leg straps, and an adjustable hip belt. The polymer-coated metal buckles and D-rings provide electrical insulation up to 12 kV. Universal size. Suitable for a maximum user weight of 140 kg. Best used with electrically insulating lanyards (1064014/1064015).
Comfortable harness with adjustable shoulder, thigh, and hip straps. With elastic straps for optimal comfort and padded mesh for better shock absorption and increased user comfort, up to a maximum weight of 140 kg. Equipped with parking eyes for a lanyard and two tool loops.
Removable hook for attaching to a harness and hanging tools, or to the hooks of a lanyard when not in use. This is not an anchor point for fall protection or rescue under any circumstances!
Fixed anchor point suitable for steel or concrete walls, ceilings, or roofs. Size M10, suitable for one person.
Mobile and universal anchor point, for use by 1 person.
Universal anchor point for one person with a protective sleeve. Suitable for structures with sharp edges.
Anchor point for one person, suitable for horizontal or vertical I-beams with a width of 100 to 340 mm. For use only as a vertical anchor point (overhead). Suitable for use in Atex environments.
Temporary, portable, and freestanding anchoring system for use on TPO roofing or concrete surfaces. The anchor point is equipped with an energy absorption system. The bottom plates have a rubber anti-slip backing. Consists of 4 cast plates and 12 top plates, each weighing 25 kg (55 lbs), (total weight: 416.5 kg). May only be used with all associated components. Suitable for 1 person.
- Fall arrest device with 10-meter cable and rescue winch - With internal energy absorber - Carabiner with fall indicator - Plastic housing - Suitable for confined spaces - vertical use - Weight: 7.40 kg - Maximum user weight: 140 kg (vertical use) - EN360 - Atex - With adapter 1063982, this can be mounted on tripods 1063976/1062545
Fall arestor 30-meter stainless steel cable, fully sealed housing, suitable for use in extreme weather conditions. With stainless steel musketon with fall indicator, convenient handle. Suitable for vertical use only. Max user weight: 140kg
Work and rescue winch, mountable on Kratos tripods. Suitable for hoisting or lowering materials (min. weight: 60 kg, max. weight: 250 kg - in accordance with the Machinery Directive) and persons wearing a seat harness. In the event of an evacuation, the victim may be hoisted, or lowered a maximum of 2 m. Maximum person weight: 135 kg. 6 mm synthetic rope. Suitable for use in Atex environments. Complies with Machinery Directive 2006/42/EC, EN 1496:2017 Class B, EN13157:2004, Atex Directive 2014/34/EU.
Automatic descent and evacuation device for one person. Suitable for rapid rescue operations. Descent speed of approximately 2 m/s regardless of weight (max. user weight: 141 kg). Includes 20m of 9.6 mm kernmantle rope with two carabiners and a handy carrying bag. For use by one person.
Steel carabiner, automatic locking, opening 16mm, weight 160gr, breaking force 25kN.
Stainless steel carabiner with automatic locking, opening 16.5 mm, 210 g, breaking force 23 kN.
Exoskeleton to protect the housing of the fall arrestor Helixon-S, especially during horizontal use. Attaches with 4 included screws.
Exoskeleton to protect the Helixon-S fallarrestor housing, especially during horizontal use. Attaches with 6 included screws.
Lanyard made of 11mm thick, sharp-edged kernmantel rope with self-locking aluminum hooks (one scaffold hook and one small carabiner). Maximum user weight: 140kg.
Double lanyard made of 30mm wide polyester webbing with a damper, specially designed to protect operators working at height in envir onments with potential electrical hazards. Maximum user weight: 100kg.
Kernmantel rope with a diameter of 12mm, assembled with a non-removable rope clamp and energy absorber. It features a steel snap hook (manual locking) on one end of the rope and a knot on the other. Suitable for use near sharp edges. The rope stitching is protected by a strong, transparent protective sleeve that also facilitates visual inspection of the seams before each use.
Double lanyard for attaching to the tool loop of a harness on one side and two tools, each weighing up to 5 kg, on the other. Maximum length: 130 cm.
Stretch lanyard for attaching to the tool loop of a harness on one side and a tool weighing up to 5 kg on the other. Max. length: 130 cm
Double elastic lanyard with comfort‑grip scaffold hooks that are side‑load rated, tested for a maximum user weight of 130 kg and suitable for use over sharp edges.
Fall arrest block of 1.8m length, plastic housing, swivel on housing with tri-lok steel carabiner and automatic carabiner in galvanized steel both with 17mm opening. Max user weight up to 140kg. Suitable for fall factor 1 (connection at shoulder height).
Fall arrest block of 1.8m length, plastic housing, swivel on housing with tri-lok steel carabiner and aluminum scaffold hook on the strap 57mm opening. Max user weight up to 140kg. Suitable for fall factor 1 (connexion at shoulder height).
Double lanyard of 2m with shock absorber and 2 large aluminum scaffold hooks (60 mm) (M51) and classic carabiner (M10) on the side anchoring harness. Strap made of polyester of 30mm width. Max user weight including material: 150 kg. Conforms: EN355.
Extra deep tool belt holster.
