BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Black carrying bag made of nylon coated with TPU. Dimensions: 50x24x24cm.
Automatic downward evacuation device for 1 person. Descent speed approx. 2m/sec regardless of weight (max. user weight: 141 kg). With 9 ,6mm kernmantle rope with 20m lenght and 2 carabiners, comes in a handy transport bag. To be used by 1 person.
WorkAir by D-Air Lab is the first PPE-certified airbag system for workers at height. Designed and manufactured entirely in Italy, the system protects back, chest and vital organs by inflating within 40 milliseconds in the event of a fall. It can be used without fall protection from 1.2 m to 2 m, and above 2 m in combination with a fall arrest harness. WorkAir uses the "Intelligent Clothing" technology developed by Dainese for motorbike racers and skiers. It is lightweight, comfortable and ergonomic. Also available in Fluo yellow and Fluo orange.
Ideal for installation and use on large structures (skydomes, trees, beam anchors, posts, etc.). Can be used with a horizontal temporary lifeline. Two elastic loops to hold the free end during use. Has a small Velcro strap to keep the lifeline coiled up when not in use. Minimum breaking strength > 24 kN.Static strength > 18 kN. Max length 5m, width: 45mm.
Descender for safe descent of 11 mm kernmantle rope. Equipped with a double safety: clamps the rope if the lever is not pressed or i s pressed too far. This prevents unintended descent in a panic situation. Opening at the bottom to be connected to the harness with a safety line.
Ascender for left-handers for use on 8-13 mm kernmantle rope. Ideal for climbing rope in combination with a foot loop. Has two openi ngs at the bottom: one for the foot loop and one to be connected to the harness with a safety line. Can also be used to gain a bette r grip when pulling up a rope.
Ascender for right-handers on 8-13 mm kernmantle rope. Ideal for climbing rope in combination with a foot loop. Has two openings at the bottom: one for the foot loop and one to be connected to the harness with a safety line. Can also be used to gain a better grip when pulling up a rope.
Bag for tools that can be attached to harness. Made of solid plastic with transparent section for easy use at height. Content 9L.
Very robust fall-prevention device, 15 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 12 kg.
Fall-stop device 2.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for extremely sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
To anchor tools to avoid tools falling when working at height. Max weight: 15.9 kg. Not PPE.
Anchorage for I-beams ranging from 30.4 to 91 cm. Maximum thickness of beam 6.5 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Fall arrest block Rebel 15 metres stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. Both for vertical and horizontal usage, if horizontal usage it is mandatory to use a 2 metre webbing sling (art 1026475).
Wall base for davit arm with boom. For permanent attachment to concrete or a metal construction. Opening for davit fitted with hard PVC sleeve to allow davit arm to pivot more smoothly. Dimensions: W25.4 x D 19 x H 32,4 cm. Other feet or mobile bases for the davit arm are available on request.
Cap for fixed base davit arm. No PPE.
- Elastic lanyard for tools - Hook on one side, loop on the other side - Max load rating: 4.5kg - Lenght: min 81cm to max 119cm when fully extended
Fall arrest device Rebel 12 meters galvanized steel cable with integrated shock absorber. Plastic housing. Stops any vertical falling movement almost immediately. Serves as a connection between anchor point and harness. Equipped with ergonomic cable handle and carabiner with fall indicator that allows you to know when a fall has occurred. For vertical <(>&<)> horizontal use.
To create attachment point on tools. For material lighter than 0.9kg. Always use with Python Safety Quick wrap tape. Not PPE.
Holster to fit virtually any hand-held radio, mobile phone and many other devices. With clip2loop coil tether and micro D-ring. No PPE.
Retractable telescopic pole of glassfiber to attach the rescue line to the harness of a fallen person. To combine with carabiner 1056763 and the evacuation kit 1056761 in order to save a victim without to descend yourself. The snap closure is held in an open position. Lenght: 0,75 - 3m. Comes with a transportation bag.
Atex fall arrest block with steel cable and integrated rescue winch. Can be attached to tripods 1063976/1062545 using adapter 1063981. Maximum user weight: 140 kg (vertical use).
Double fall-stop device 2.5 metre strap with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Also useful for fall factor 2.
Removable extension strap with D-ring for attachment to the dorsal anchor point of Kratos harnesses from the Premium series, and for use only in conjunction with a fall arrest block. This extension allows for easy anchoring on the back.
Temporary horizontal lifeline with a maximum length of 18m, easy to install. Durable plastic housing with a carrying handle and tension indicator. Built-in shock absorption mechanism to limit impact forces during a fall. Suitable for two people and can be used in Atex Zone 1 environments.
Temporary aluminum anchor for door or window frames with dimensions from 60 to 125 cm. For horizontal use only, and suitable for 2 people.
Adaptation kit to attach fall arrestor kalypso 10m with winch (1063977/1063978) to tripod 1062545/1063976.
Work and rescue winch, mountable on Kratos tripods. Suitable for lifting or lowering materials (minimum weight: 60kg, maximum weight: 250kg - in accordance with the Machinery Directive) and persons preferably wearing a seat harness. In case of rescue, the victim may only be lifted upwards. Max weight person: 135kg. Stainless steel cable 4.8mm. Suitable for use in Atex environments. Complies with Machinery Directive 2006/42/EC, EN 1496:2017 Class A, EN13157:2004, Atex Directive 2014/34/EU.
Lanyard in 11mm thick sharp edge kernmantel rope with aluminum self-locking hooks (1 scaffold hook and 1 small carabiner).
Lanyard, 2 meter length, consisting of elastic strap with integrated shock absorber. Fitted with one aluminium standard carabiner and two aluminium with big opening (60mm) and a fall indicator. Capacity up to 140Kg. Serves as connection between anchor point and harness. Suitable for use with sharp edges.
Lanyard made of 30mm wide polyester webbing with a damper, specially designed to protect operators working at height in environments with potential electrical hazards. Maximum user weight: 100kg.
Repair of Kratos fall block with direct delivery to the end user price on request
Work seat designed to improve comfort during long periods of work. Supplied with 2 quick release buckles and can be attached to the side of the harness Volt light, Volt, Volt Wind and Volt Wind Offshore
Transparent PVC and polyamide cover for protecting fall arrest blocks up to 15 m used outdoors
Cord attached to the carabiner of a high-mounted retractable fall arrester, allowing the carabiner to be easily pulled down to connect to the harness anchor point
Evacuation sling made of polyester/cotton with adjustable shoulder straps. Can easily be fitted to unconscious person. For safe evac uation of a person requiring assistance, in combination with an evacuation device such as made by Rollgliss. The three ends are brou ght together and connected to a single carabiner in order to evacuate the person.
Rope clamp for kernmantle ropes from 8 to 13 mm. Facilitates lowering of hoisting of a person using the Rollgliss system if the clamp is mounted on the rope of the Rollgliss. In compliance with: EN341.
Bag for tools that can be attached to harness. Made of solid plastic with transparent section for easy use at height. Content 7.4L.
Rescue fork extendible to 4.8m to work from a distance, and allow a person who has fallen descend with a fall-block Ultra-lok RSQ. The descent button can be operated remotely.
Winch for descents or rescue. Max load 204kg. To be used in combination with Davit-system or AM100 tripod. Handle to be used in 2 different ways (reduction 4 and 9:1). Best used in combination with suspension harness. To be used in confined spaces.
Rescue and descent device with rotating wheel and 9.5 mm kernmantle rope for rescue or evacuation of you, a second person or any victim from height. The hand-wheel serves to lower or retrieve victims. Suitable for rescue operations in hard to access locations and heights.
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Locking mechanism remains blocked even if there is a recoil effect after the fall (ideal for use with horizontal lifelines). Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical use.
Compatible with all ISO certified containers. Provides an elevated anchoring point, allowing free fall requirements to be reduced. Provides a total fall protection solution, even for a single container. No tools or adjustments to container required. Height: 1.25m. Weight: 12 kg. Always combine with fall-block.
The 3M™ DBI-SALA® pocket holster with roll-up mechanism is a belt holster with a roll-up mechanism at the back. This holster is ideal for tape measures and other small hand tools. Not PPE.
Descending and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably use with seat harnesses. To be operated with a drill. Not for use in enclosed areas.
Set of 10 adjustable wristbands with cord to attach tools.
Padded cordura provides for durability and comfort. Waist size S/L (71cm -117cm) No PPE.
U-shaped base for Davit arm. Width adjustable from 1,9m - 2,6m.
Davit mast 533 mm, to be combined with boom, base, fall-block and/or descent winch and accessories.
Harness with 2 attachment points on the back and chest. Breast anchor point by means of 2 loops and back attachment point by means of D-ring. Equipped with a positioning belt with 2 D-rings on the sides. Adjustable leg and shoulder straps. Designed for extreme conditions where high voltage is a risk. Bands made of heat resistant Nomex / kevlar and equipped with dielectric quick-release fasteners. Available in S / M, L / XL or XXL.
Set of 10 spiral cords with hook and quick ring. Length: relaxed 7,6cm, extended 157,5 cm. For tools with max weight of 0,9kg.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Width: 2,54cm, lenght: 2,74m Not PPE.
Movable base with 4 wheels for davit arm RJ200.
Yellow stainless steel anchor point for wind turbines, rotable with stainless steel mointing hardware. Use for 1 person included gear with maximum weight of 140 kg.
Stainless steel carabiner automatic closing, opening 22.5 mm, weight: 230 gr. Breaking force: 25kN.
Double action aluminum rebar hook with large gate opening, automatic locking mechanisme and a closed connection point. Suitable for use with rescue pole 1056762 and evacuation kit 1056761.
White-yellow replacement rope of 2m for positioning line Grillon.
