BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Descending and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably use with seat harnesses. To be operated with a drill. Not for use in enclosed areas.
Descending and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably to be used with seat harnesses. Ideal for enclosed spaces.
Davit arm with boom. Davitarm and base system includes adjustable upper mast, lightweight lower mast and 3-piece lightweight base. Includes mounting bracket for a winch. Order winch and SRL separately. Boom has a universal anchor point for fall-blocks or safety line. In combination with the adapters, fall-protection blocks with or without winch or permanent winches, can also be mounted to the davit. Boom has two roller wheels to guide cable of fall-protection block or winch. The boom is extendible in different positions. Height with boom: max. 2542 mm.
Adaptor to connect short davit arm with old fixed base No PPE.
Cap for fixed base davit arm. No PPE.
Harness with 2 attachment points on the back and chest. Breast anchor point by means of 2 loops and back attachment point by means of D-ring. Equipped with a positioning belt with 2 D-rings on the sides. Adjustable leg and shoulder straps. Designed for extreme conditions where high voltage is a risk. Bands made of heat resistant Nomex / kevlar and equipped with dielectric quick-release fasteners. Available in S / M, L / XL or XXL.
Rescue and descent device with rotating wheel and 9.6 mm semi-static kernmantle rope for rescue or evacuation of you, a second person or any victim from height. The hand-wheel serves to lower or retrieve victims, can be used with an electric screwdriver. Maximum weight for 2 persons: 225kg. Suitable for rescue operations in hard to access locations and heights.
To use with rescue harnesses, allows the victim to be pulled out of the manhole in vertical position.
Mobile davit arm 6m to enable fall protection on vehicles, containers, etc. for loading and unloading materials and/or general inspection and repair purposes. Rotating arm, suitable for 1 person. Including base for concrente (3000Kg) and fall arrest block steel cable 10m. Price includes transport. Price for mounting and/or concrete pouring upon request.
HiViz yellow safety vest with integrated positioning harness. Equipped with 4 tool holders.
Webbing rescue ladder with aluminium reinforced rungs with a length of 6m in an integrated transport bag. Only to be used for rescuing a person after a fall from at height !! Never use as an access point! With inegrated secuity system. Delivered with 3 steel carabiners.
Atex fall arrest block with steel cable and integrated rescue winch. Can be attached to tripods 1063976/1062545 using adapter 1063981. Maximum user weight: 140 kg (vertical use).
Movable base with 4 wheels for davit arm RJ200.
Stainless steel carabiner automatic closing, opening 22.5 mm, weight: 230 gr. Breaking force: 25kN.
Descent/evacuation kit Rollgliss with 9.5 mm core rope with reduction 3:1 that makes retrieval and descent lighter. Total rope length should be divided by 3 to know the usable rope length. To be hung from the eyes of Rollgliss or other anchoring points. Can only be used with the supplied line clamp Jumar which must be operated by a second person, not for self-descent. Hoisting a person with the R350 is only permitted in combination with the AM100 tripod. Transport bag included. Max descent capacity: 250kg, max raising capacity: 150kg.
Descent/evacuation kit Rollgliss with 9.5 mm core rope with reduction 5:1 that makes retrieval and descent lighter. Total rope length should be divided by 5 to know the usable rope length. To be hung from the eyes of Rollgliss or other anchoring points. Can only be used with the supplied line clamp which must be operated by a second person, not for self-descent. Max descent capacity: 250kg, max raising capacity: 200kg. Hoisting a person with the R350 is only permitted in combination with the AM100 tripod.
Double action aluminum rebar hook with large gate opening, automatic locking mechanisme and a closed connection point. Suitable for use with rescue pole 1056762 and evacuation kit 1056761.
White-yellow replacement rope of 2m for positioning line Grillon.
Mobile mast of 6 m as anchor point for fall protection above vehicles, containers, etc. so that loading and unloading of materials, inspection and repair actions can be carried out safely. Rotating arm of 2 m suitable for 1 person. Price complete including fall block, transport and assembly.
Sturdy waterproof material on top and sides. Has 4 ventilation holes at the bottom to prevent damage to wet rope. Suitable for max 50kg. Dimensions 55 x 33 cm.
WorkAir by D-Air Lab is the first PPE-certified airbag system for workers at height. Designed and manufactured entirely in Italy, the system protects back, chest and vital organs by inflating within 40 milliseconds in the event of a fall. It can be used without fall protection from 1.2 m to 2 m, and above 2 m in combination with a fall arrest harness. WorkAir uses the "Intelligent Clothing" technology developed by Dainese for motorbike racers and skiers. It is lightweight, comfortable and ergonomic. Also available in Fluo yellow and Fluo orange.
WorkAir by D-Air Lab is the first PPE-certified airbag system for workers at height. Designed and manufactured entirely in Italy, the system protects back, chest and vital organs by inflating within 40 milliseconds in the event of a fall. It can be used without fall protection from 1.2 m to 2 m, and above 2 m in combination with a fall arrest harness. WorkAir uses the "Intelligent Clothing" technology developed by Dainese for motorbike racers and skiers. It is lightweight, comfortable and ergonomic.
Aluminum tripod with two anchor points and one pulley in the head, adjustable height from 1.15m to a maximum of 2.15m. Weight: 13kg. Max. capacity: 500kg. Equipped with a built-in winch mount and supplied in a convenient carrying bag.
Wrist strap with a 120mm line to attach tools weighing up to 2kg to prevent them from falling when working at height.
Double lanyard for attaching to the tool loop of a harness on one side and two tools, each weighing up to 5 kg, on the other. Maximum length: 130 cm.
Stretch lanyard for attaching to the tool loop of a harness on one side and a tool weighing up to 5 kg on the other. Max. length: 130 cm
Economical basic harness with 2 anchor points and classic buckle closures (buckle-by-buckle). Universal size. Adjustable shoulder and leg straps. Maximum user weight: 140 kg.
Specially designed for working in environments with potential electrical hazards. Adjustable shoulder and leg straps, and an adjustable hip belt. The polymer-coated metal buckles and D-rings provide electrical insulation up to 12 kV. Universal size. Suitable for a maximum user weight of 140 kg. Best used with electrically insulating lanyards (1064014/1064015).
Mobile and universal anchor point, for use by 1 person.
With a D-ring at each end. Suitable for use in ATEX Zone 1 and for one user only.
Temporary webbing lifeline with adjustable length from 5 to 20 meters, suitable for two people. It can be attached directly to a structure or to an anchor point using the supplied snap hooks (2). Supplied in a convenient carrying bag.
Temporary horizontal lifeline with a maximum length of 18m, easy to install. Durable plastic housing with a carrying handle and tension indicator. Built-in shock absorption mechanism to limit impact forces during a fall. Suitable for two people and can be used in Atex Zone 1 environments.
Temporary, portable, and freestanding anchoring system for use on TPO roofing or concrete surfaces. The anchor point is equipped with an energy absorption system. The bottom plates have a rubber anti-slip backing. Consists of 4 cast plates and 12 top plates, each weighing 25 kg (55 lbs), (total weight: 416.5 kg). May only be used with all associated components. Suitable for 1 person.
- Fall arrest device with 10-meter cable and rescue winch - With internal energy absorber - Carabiner with fall indicator - Plastic housing - Suitable for confined spaces - vertical use - Weight: 7.40 kg - Maximum user weight: 140 kg (vertical use) - EN360 - Atex - With adapter 1063982, this can be mounted on tripods 1063976/1062545
Atex fall arrestor with stainless steel cable and integrated rescue winch, can be attached to Kratos tripod 1063976/1062545 using adapter 1062544. Max user weight: 140kg (vertical use).
Work and rescue winch, mountable on Kratos tripods. Suitable for hoisting or lowering materials (min. weight: 60 kg, max. weight: 250 kg - in accordance with the Machinery Directive) and persons wearing a seat harness. In the event of a person being evacuated, they may be hoisted or lowered a maximum of 2 m. Maximum person weight: 135 kg. 6 mm synthetic rope. Suitable for use in Atex environments. Complies with Machinery Directive 2006/42/EC, EN 1496:2017 Class B, EN13157:2004, Atex Directive 2014/34/EU.
Automatic descent and evacuation device for one person. Suitable for rapid rescue operations. Descent speed of approximately 2 m/s regardless of weight (max. user weight: 141 kg). Includes 20m of 9.6 mm kernmantle rope with two carabiners and a handy carrying bag. For use by one person.
Kernmantel rope, 2m long, 11mm diameter, with steel snap hooks and a ring adjuster to adjust the rope length. The seams are protected by a strong, transparent protective sleeve that protects the ends and makes the seams visible, making inspection before use easy. For positioning only.
Kernmantel rope 11mm diameter with aluminum snap hooks, including one scaffold hook. The seams are protected by a strong, transparent protective sleeve that protects the ends and makes the seams visible, making inspection before use easy. For positioning only.
Kernmantel rope with a diameter of 12mm, assembled with a non-removable rope clamp and energy absorber. It features a steel snap hook (manual locking) on one end of the rope and a knot on the other. Suitable for use near sharp edges. The rope stitching is protected by a strong, transparent protective sleeve that also facilitates visual inspection of the seams before each use.
Unique system: 2-point harness integrated in a backpack. Backpack has a separate compartment for storing a safety helmet and an extra compartment for storing a fall block or lanyard. The advantage is that everything stays together, and is ideal for inspectors who do not know in advance whether they have to work at height, and in this way are always provided with the necessary PPE. Backpack is equipped with auto-lock zippers that do not unzip further when the bag is partially opened, is equipped with reflective accents and waterproof.
Removable hook for attaching to a harness and hanging tools, or to the hooks of a lanyard when not in use. This is not an anchor point for fall protection or rescue under any circumstances!
Removable extension strap with D-ring for attachment to the dorsal anchor point of Kratos harnesses from the Premium series, and for use only in conjunction with a fall arrest block. This extension allows for easy anchoring on the back.
Fixed anchor point suitable for steel or concrete walls, ceilings, or roofs. Size M10, suitable for one person.
Fixed anchor point suitable for steel or concrete walls, ceilings, or roofs. Size M12, suitable for one person.
Universal anchor point for one person with a protective sleeve. Suitable for structures with sharp edges.
Anchor point for one person, suitable for horizontal or vertical I-beams with a width of 100 to 340 mm. For use only as a vertical anchor point (overhead). Suitable for use in Atex environments.
Fall arestor 30-meter stainless steel cable, fully sealed housing, suitable for use in extreme weather conditions. With stainless steel musketon with fall indicator, convenient handle. Suitable for vertical use only. Max user weight: 140kg
Adapter kit to attach 20m Kalypso fall arrestor with winch (1060088/1058563) to tripod 1062545/1063976.
Adaptation kit to attach fall arrestor kalypso 10m with winch (1063977/1063978) to tripod 1062545/1063976.
Winch for descents or rescue. To be used in combination with tripod MultiSafeWay and EasySafeWay. Stainless steel cable 4,8mm. Best used in combination with suspension harness. To be used in confined spaces.
Steel carabiner, automatic locking, opening 16mm, weight 160gr, breaking force 25kN.
Stainless steel carabiner with automatic locking, opening 16.5 mm, 210 g, breaking force 23 kN.
Exoskeleton to protect the housing of the fall arrestor Helixon-S, especially during horizontal use. Attaches with 4 included screws.
Exoskeleton to protect the Helixon-S fallarrestor housing, especially during horizontal use. Attaches with 6 included screws.
