BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Chlorinated (provides more comfort and is less sticky) with texture on the fingertips. Biodegradable. Size XXL: 90 pieces per dispenser.
The SST1 single gas detector provides up to two years of maintenance-free operation and is available in H2S, SO2, CO, or O2 models. Its simple design makes it perfect for users looking for ultimate protection while being easy to use, durable, and cost-effective. low and high alarm :4ppm
Disposable glove in nitrile materia, blackl. Powderfree. Palm and back with full-surface, non-slip fish scale structure. Firm grip in wet conditions, oil and grease. 24cm, 0.14mm thickness. Food safe. Sizes: S-XL. Conforms to: EN374-1:2016: Type B GKLMT; EN374-5:2016
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option and not for 3-year life detectors!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: 3 YEARS CO with alarms at 20PPM and 100PPM. Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Lightweight overall with hood, made of SMMS polypropylene, intended for limited use in dry conditions. Combines protection against dirt and non- hazardous substances with high comfort and breathability. Features nylon zipper with flap, external seams and elastic at wrists and ankles.
The SST1 single gas detector provides up to two years of maintenance-free operation and is available in H2S, SO2, CO, or O2 models. Its simple design makes it perfect for users looking for ultimate protection while being easy to use, durable, and cost-effective. low alarm: 2ppm, high alarm 4ppm.
Coverall, polypropylene, 50 gr./m², hood with elastic, zip closure under flap, elastic at wrists and ankles. Available in: white, blue. Sizes: L- XXL.
Overall, polypropylene with a microporous film, limited use, microporous film gives for extra protection in damp conditions such as light splashes of few hazardous liquids.
Coverall with hood, elastic face opening and chin flap for a tight fit around the breathing mask, stitched and taped seams, double adhesive zip, double zip and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle-tight fabric, excellent barrier against a wide range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Anti-static treatment (inside). Includes non-dissipative gloves and dissipative socks. Available sizes: S-3XL. Available colors: gray. In accordance with: EN 1073-2: 2002, EN14605: 2005 + A1: 2009 (Type 3/4), EN ISO 13982-1: 2004 + A1: 2010 (Type 5), EN 13034: 2005 + A1: 2009 ( type 6), EN14126: 2003 and EN 1149-5: 2008.
TYVEK® IsoClean® sleeve option 00 (Bulk Packed) Bound seams. Covered elastic at both ends. 45 cm long. White. Available sizes: one size For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.
Tyvek® IsoClean® IC 458B WS Boot cover Bound seams. Covered elasticated leg opening. Ankle ties. Slip-retardant Gripper™ sole. White. Available sizes: S - XL S fits up to EU 37 M fits up to EU 39,5 L fits up to EU 48,5 XL fits up to EU 53 For cleanrooms up to ISO 5, GMP A/B STERILE ONLY.
Robust yet lightweight protection providing a barrier against fine particles and low-level sprays in an extremely breathable white hooded coverall made with the innovative new Tyvek® APX™ fabric.
TYVEK® IsoClean® slip-retardant shoe cover option 00 (Bulk packed) Serged seams. Elasticated opening. Slip-retardant Gripper™ sole. White. Available sizes: M and L (M = up to EU 39,5 - L = up to EU 47) For cleanrooms up to ISO 7, GMP C/D. NOT CLEAN PROCESSED. NOT STERILIZED.
Earplugs with cord, made from a slow expanding, PU foam material. •An Ear Plug that gives evenly distributed pressure and a good seal with optimum comfort.
Powder-free and latex-free nitrile disposable glove, accelerator-free to reduce the risk of type IV allergies. Non-slip textured surface for excellent grip and precise object handling. Long cuff for optimal protection. Food approved. Thickness: 0.11 mm. Length: 290mm Sizes: 7 (S) – 11 (XXL) Packaging: 100 pcs/dispenser box. Sizes 10–11: 90 pcs/dispenser box Complies with EN 455‑1/2/3/4 for non-reusable medical gloves. Conformity: EN 374: TYPE B: JKT – VIRUS – EN 421
Metal detectabel cutter, easy to clean, for left- and righthanded. Enclosed blade. Ideal for cutting straps, plastic bags, shrink wrap, paper bags. Disposable cutter, no replaceable blades. No PPE.
Boot Cover – CTL903CMP • Tunneled elastic top • 19" high • Non-skid vinyl sole Pack: 50 pair Available sizes: SM/ LXL/ 2XL For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND NON-STERILE
Navy blue disposable nitrile glove. Powder-free and accelerator-free. Ambidextrous, with roughened fingertips. Designed for use in l aboratories and research environments.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask, with new improved exhalation valve. Protects against organic gases and vapours with a boiling point >65 °C, plus harmful dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. Sizes: universal. NPF: dependent on the filter used.
Dual Hook, Carbon Steel blade lasts twice as long as single blade cutters. Unique cardboard piercing shape prevents damage to carton contents. Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color makes it easy to find in cluttered work environments. Small ridges ensure a secure grip. Colour: yellow
Navy blue disposable nitrile glove. Powder-free and accelerator-free. Ambidextrous, with roughened fingertips. Designed for use in l aboratories and research environments. Version with long cuff.
Comfortable half-mask in rubber, with unique sealing profile for extra safety and longer life. Fitted with ergonomically formed head and neck bands for precise adjustment of the mask. Wide field of vision due to placement of filters. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. NPF: dependent on the filter used.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option and only for 2-year detectors) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: 3 YEARS H2S with alarms at 10PPM and 15PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
TYVEK® IsoClean® coverall IC 183 B WH DS with collar. Bounded seams, bounded neck, raglan sleeves. Covered elastic wrists and ankles. White. Available sizes: S - 3XL For cleanrooms up to ISO 5, GMP A/B CLEAN PROCESSED + STERILIZED
High barrier Type 3 <(>&<)> 4 chemical suit combined with FR properties. Can be worn over Thermal Protective (EN11612) Garments without compromising thermal protection as a standard chemical suit would. Quality: PVC film / EVOH film/ woodpulp/polyester nonwoven fabric. 232g/m². Available sizes: S-XXXL. Available colours: Dark blue.
TYVEK® IsoClean® frock with bound neck option 0B (Bulk packed) Bound seams. Covered elastication at wrists. Front snap closure for easy donning and doffing. White. Available sizes: S - 3XL For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.
TYVEK® IsoClean® boot cover IC 458 B WH MS Bound seams. Covered elasticated leg opening. Ankle ties. Slip-retardant Gripper™ sole. White. Available sizes: S - XL S fits up to EU 37 M fits up to EU 39,5 L fits up to EU 48,5 XL fits up to EU 53 For cleanrooms up to ISO 5, GMP A/B CLEAN PROCESSED + STERILE.
Fully encapsulating ChemMax 1 suit with HDPE barrier fabric to be worn with the e-breath Powered Air-Purifying Respirator. Version with non-slip soles.
Powder-free and latex-free nitrile disposable glove, accelerator-free to reduce the risk of type IV allergies. Non-slip textured surface. Food approved. Thickness: 0.11 mm – Length: 240 mm Sizes: 7 (S) – 11 (XXL) Packaging: 100 pcs/dispenser box. Sizes 10–11: 90 pcs/dispenser box Complies with EN 455‑1/2/3/4 for non-reusable medical gloves. Conformity: EN 374 – TYPE B: JKT – VIRUS – EN 421
Dual Hook, Carbon Steel blade lasts twice as long as single blade cutters. Unique cardboard piercing shape prevents damage to carton contents. Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color makes it easy to find in cluttered work environments. Small ridges ensure a secure grip.
Tyvek® IsoClean® IC193B TS coverall DuPont™ Tyvek® IsoClean® hooded coverall, model IC 193 B WH TS. Gamma-sterilized. Bound internal seams. Integrated overboots with a slip retardant Gripper™ sole. White. Available sizes: XS - 7XL (XS, 4XL, 5XL, 6XL and 7XL made to order. Terms <(>&<)> conditions applicable.) For cleanromms up to ISO 5, GMP A/B. STERILE ONLY
Tyvek® IsoClean® IC 729S WS Bouffant Elastic headband. Packed in a dual barrier validated packaging system (double bagged). White. Available sizes: one size For cleanrooms up to ISO 5, GMP A/B STERILE ONLY.
Ventilated coverall with stitched and over taped seams. Fully enclosed over hood with clear front and crown see through visor. Front closure with double flap hook and loop, single zipper closing to center, horizontal opening. Three exhaust valves; two at hips one in hood back. Air distribution plenum made of Tychem® 6000 fabric. Emergency Egress. Attached non-dissipative under gloves and integrated dissipative socks. Conform: EN 1073-1, EN 1149-5, EN 14126, EN 14594, CAT 3 *Made to order. Available sizes: S-3Xl Available color: grey
Non-rechargeable battery for Clean Air motor unit for use with the RJS suit.
Fully encapsulating ChemMax 1 suit with HDPE barrier fabric to be worn with the e-breath Powered Air-Purifying Respirator
DuPont™ Tyvek® 500 HV TY127S XG. Hooded coverall. Ergonomic-protective design. Respirator fit hood. Elasticated wrists and ankles and waist. Zipper made with Tyvek® material, Tyvek® flap. Fluorescent orange with grey retroreflective bands. Retroreflective bands create a symmetric "X" on the back of the coverall distinguishing rearward and forward orientation of the wearer. Stitched external seams.
Coverall with hood, elastic face opening and chin flap for a tight fit around the breathing mask, stitched and taped seams, double adhesive zip, double zip and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle-tight fabric, excellent barrier against a wide range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Anti-static treatment (inside). Includes non-dissipative gloves. Available sizes: S-3XL. Available colors: gray. In accordance with: EN 1073-2: 2002, EN14605: 2005 + A1: 2009 (Type 3/4), EN ISO 13982-1: 2004 + A1: 2010 (Type 5), EN 13034: 2005 + A1: 2009 ( type 6), EN14126: 2003 and EN 1149-5: 2008.
TYVEK® IsoClean® Gown option 00 Bulk ( Bulk Packed) Serged seams. Bound neck with ties. Knitted Cuffs. Bound ties originating at center front waist. White. Available sizes: M and 2XL For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.
Tyvek® IsoClean® IC501B WS Sleeve Bound seams. Covered elastic at both ends. 45 cm long. White. Available sizes: one size For cleanrooms up to ISO 5, GMP A/B STERILE ONLY.
Frock – CTL191CM • Mandarin collar • Zipper closure • No pockets • Tunneled elastic wrists with thumb loops Available sizes: M - 3XL For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND NON-STERILE
Coverall – CTL428CS • Zipper closure • Attached hood • Tunneled elastic on wrists (with thumbloops), ankles, and back half of waist Case Pack: 25 Available sizes: M - 3XL For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND STERILE
Single use fire blanket specially developed for controlling car fires. The fire is smothered immediately after the fire blanket is placed over the burning vehicle, resulting in less smoke development. Comes in a transport bag. Constant temperature resistance up to 600°C (short term > 1000°C).
Blue nitrile disposable glove providing excellent protection against chemical splashes. Textured fingertips. Food approved and touchscreen compatible. Extended cuff. Thickness: 0.20 mm Length: 295 mm Sizes: 7–11 Compliant with: EN 374‑1: Type A JKLOPST, EN 374‑5: VIRUS, EN 421
Disposable safety knife with double hook, a lanyard hole in the handle, and 2 small plastic tape splitters. The laminated blade prevents damage to the contents of the packaging. Metal detectable.
Lightweight disposable hood for use with Versaflo powered air units (NPF:500) or with 3M regulators for connection to a compressed air supply (NPF:200). Equipped with an adjustable head harness. Available in size M/L. Supplied in packs of 5 pieces individually packed .
Disposable black nitrile glove with protection against chemical splashes Type A (JKOPST). Ideal for environments where silicone must be avoided, such as painting or finishing work. Improved grip and control thanks to textured palm. Approved for food contact, silicone-free, powder-free, and suitable for touchscreens. Tested for substances that may interfere with paint adhesion. Length: 295 mm Thickness: 0.20 mm AQL: 0.65 Sizes: 7-11 Compliant with: EN388: 1000X EN374: Type A (JKOPST) EN374-5: VIRUS
Disposable knife made from metal-detectable plastic with a curved steel blade, preventing damage to contents. Suitable for both left- and right-handed users, equipped with a lanyard hole, and suitable for cutting up to 2-layer cardboard, tape, plastic, packing slips, shrink and stretch film, and strapping bands.
Microporous hood with exhalation valve, PETG visor, air duct and adjustable head harness. Unique low flow indicator to combine with T-airline regulator kit. To be used for working with motor unit. In line with EN 14594:205 Class 4A
Replacement earplug for Xact-Fit. Packed in a bag containing 250 pairs. SNR: 26dB.
Metal detectable disposable knife with integrated stainless steel blade, for left and right-handed use. Suitable for use in the food industry. For cutting tape, strapping tape, plastic, paper bags, foils, 2-ply cardboard. No PPE.
Green, latex-free disposable glove in Neoprene, suitable for use with touch screens.
Hood – CTL713CM • Covers shoulders • One size • Ties to customize fit Case Pack: 100 Available sizes: one size For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND NON-STERILE
Navy blue disposable nitrile glove. Powder-free and latex-free. Ambidextrous, with roughened fingertips. Designed for use in laborat ories and research environments. Content size XL: 170 pieces.
Single gas detector with limited life of 3 years without maintenance. Displays only remaining lifetime on screen, no concentrations. H2S with alarms at 1.6PPM and 3.2PPM. (min. 1.6PPM and 20PPM)
High-quality ambidextrous nitrile disposable gloves, specifically designed for use in laboratories and non-sterile pharmaceutical en vironments. The optimized nitrile formula (acrylonitrile butadiene) offers comprehensive protection against chemicals and chemotherapy drug spla shes without compromising comfort. Latex and silicone-free. Food-approved. Length: 240 mm Sizes: XS to XL Compliant: EN374: Type B: JKOPT, VIRUS
HD/PE barrier film laminate hood with exhalation valve, PETG visor, air duct and adjustable head harnes. Unique flow indicator. PE breating hose. For high hazard applications combined wit T-airline regulator kit. To be used with compressed air systems.NPF 2000.
Microporous hood with exhalation valve, PETG visor, air duct and adjustable head harness. Unique low flow indicator.PE breating hose combined with T-airline regulator kit. To be used for working with compressed air. NPF 2000 In line with EN 14594:205 Class 4A
TYVEK® IsoClean® hood with ties. option MS Clean-processed and gamma-sterilized. Bound seams. Bound hood opening for low particle shedding. Full face opening. Ties with loops for adjustable fit. Packed in a dual barrier validated packaging system (double bagged). White. Available sizes: one size For cleanrooms up to ISO 5, GMP A/B CLEAN PROCESSED + STERILE.
Tyvek® IsoClean® IC183B TS Coverall Bound seams, bound neck, raglan sleeves. Covered elasticated wrists and ankles. Single packed. White. Available sizes: 2XS - 7XL (2XS, XS, 4XL, 5XL, 6XL <(>&<)> 7XL are made to order. Terms <(>&<)> conditions apply.) For cleanrooms up to ISO 5, GMP A/B. STERILE ONLY.
Coverall – CTL428CM • Zipper closure • Tunneled elastic on wrists (with thumbloops), ankles, and back half of waist Available sizes: S - 3XL For cleanrooms ISO 4-6 CLEAN MANUFACTURED AND NON-STERILE
Navy blue disposable nitrile glove. Powder-free and latex-free. Ambidextrous, with roughened fingertips. Designed for use in laborat ories and research environments. Version with long cuff.
Disposable Excel knife for safely opening cardboard boxes, but also for cutting shrink wrap and binding ribbon. Also available with single laminated knife.
EVOH film barrier hood with exalation valve, PETG visor, air duct and adjustable head harness. Unique low flow indicator. For high hazard applications. Combined with T-airline regulator kit. To be used with motor unit. In line with EN 12941
HD/PE barrier film laminate hood with exhalation valve, PETG visor, air duct and adjustable head harnes. Unique flow indicator. For high hazard applications combined wit T-airline regulator kit. To be used with motor unit.
Disposable Excel single, wide knife for safely opening cardboard boxes, but also for cutting shrink wrap and binding ribbon. Also available with double laminated knife.
Replacement helmet with airduct and airduct indicator.
TYVEK® IsoClean® hood with ties option 00 (Bulk packed) Bound seams. Bound hood opening. Full face opening . Ties with loops for adjustable fit. White. Available sizes: one size For cleanrooms up to ISO 7, GMp C/D. NOT CLEAN PROCESSED. NOT STERILIZED.
Green powder-free nitrile glove with EBT Technololy: biodegradation occurs in biologically active landfills within 1-5 years. Decreased risk of allergies, latex free, food approved. Sizes: XS(5-6) to XXL (10-11). Length: 24 cm. Thickness: 0,10mm. Package: per 100 gloves! Food approved.
TYVEK® IsoClean® Bouffant option 00 (Bulk Packed) Serged Seams. Elastic headband. 54 cm Diameter. White. Available sizes: one size For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.
