BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Standard Lithium-Ion battery for SR700 motor unit, 14,8V 2,25Ah. Battery charging time: 0-80% capacity in 30min, battery autonomy d epending on filter and set air flow: 4-7h.
Ergonomically shaped with clear full colour LED display. Uses 3 standard thread filters (only approved with RSG filters); autonomy to max. 8 hours. With visual vibration and audible alarm for low flow or saturation of dust filter. Air flow can be set. IP65 approved for decontamination under the shower. To be combined with all air hoods from the T-air series with hose 1035014, or with full face mask 500E together with hose 1046652. NPF: depends on the mask used.
Blower caps to protect the PAPR from dust and contaminent entry when no filters are attached.
Disposable cover for motorunit Proflow.No PPE.
Cleanspace combined filter A1P3. Suitable for protection against airborne particulate (dust, mists and fumes), organic gases or vapours (boiling point >65°C). Weight: 220g. In line with EN12942
Cleanspace combined filter ABEK1P3 for protection against airborne particulate (dust, mists, and fumes), organic, inorganic gases or vapours, solvents, (boiling point >65°C). Weight: 200g In line with EN12942
EX battery charger for the fan unit SR 500 EX. No PPE.
Filter cover for gas filter in combination with motor unit PX5.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters and designed for welding applications. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, 2 inch FR belt, spark arrestor, flow meter, battery and charger, P filter and pack of prefilters. NPF: Depends on hood used.
Atex Half face mask designed to work to complete the Claenspace EX PAPR systems. Clips quickly onto the power units and are easily unclipped for cleaning. Made of soft silicone that readily moulds to the face and doesn't cause allergic dermatitis.
Spares pack PF-940 for powered air respirators PF-600E and PF-600E-ASB (former Proflow)
Short hose for motor unit PX5, in combination with the decontaminable harness (1053172).
Complete kit contains, SR 500 fan unit, SR602 hood, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Complete anti-static air hose with couplings for use with SR500, SR500 EX and SR700 motor units, and full mask SR200.
Complete motor unit kit consisting of SR500 motor unit, SR575 (safety helmet) air hood and passive welding filter SR574 with welding shade 10, standard battery, battery charger SR713, leather belt SR503, protective cover for air hose SR59021, 2 x P3 filters SR510, 10x prefilters SR221, 2 prefilter holder, 2 spark arresters SR336, 2 filter adapters, flow meter, plug kit, and cleaning cloth. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Air hose with angled piece connection to connect motorunit Proflow with full face mask Promask.
Kit with ABE1 filter and Li-ion battery. Filter protects against organic and inorganic gases and sulphur dioxide. Can be used in combination with the Adflo motor unit. Class 1 gas filter: for max. concentration of 0.1%.
EX battery charger for the atex battery SR502 (1061168) to be used with motor unit SR 500 EX.
Cleaning and storage plug set is designed for use with the CleanSpace WORK breathing air unit. It is an aid to seal all openings of the motor unit for storage. Do not carry the breathing apparatus when the plug set is in place. The plug set is made of polycarbonate and silicone.
Batteru for PV-300E motor unit (phantom vision).
Full-face mask specially designed for the Cleanspace CST system, quick and easy fitting, wide panoramic visor, inner mask made of soft silicone. This mask is NOT suitable for use in ATEX environments.
Cleaning and storage plug set is designed for use with the CleanSpace CST PRO breathing air unit. It is an aid to seal all openings of the motor unit for storage. Do not carry the breathing apparatus when the plug set is in place. The plug set is made of polycarbonate and silicone.
Battery charger for PV-300E motor unit (phantom vision).
Complete kit with Speedglas heavy duty welding helmet G5-03 PRO AIR, adflo motor unit and carrying bag, without welding filter.
SR500 motorunit with PVC belt drive to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Not for confined spaces. Flow rate: min. 175 or 240 L/min. Included: battery, battery charger, easy to clean PVC belt, 2x P filters, 2x filter adapters, 2x pre-filter holders, 10 prefilters, flow meter, user instructions, cleaning wipe, plug kit.Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
Motorgerät zur Kombination mit allen Kopfteilen der S- und M-Serie. Gebläseunterstützte Atemschutzsysteme beseitigen den Atemwiderstand, sind für Bart- und Brillenträger geeignet, Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-600E Turbo Unit, M-306 helmet, A2P filter, filter cover, pre-filters (x10), easy-Clean belt high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used. S uitable for: processes with chemical risks.
This ready-to-use kit includes a PF2-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1135E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger.
This ready-to-use kit includes a PF2-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1235E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger. Compatible with 3M filters DT-Series.
This ready-to-use kit includes a PF-602-ASB Powered Air Respirator, FF-602 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1235E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger. Compatible with 3M filters DT-Series.
Spare head harness for cleanspace Respirator (PAF-0034)
The Battery charger for all cleanspace models has interchangeable plugs for use in different countries.
