BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Foldable mask, class P3, New Generationfor toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic woven headbands. Improved Cool Flow Comfort Exhalation valve provides even lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. This mask does not contain components of rubber latex and PVC. NPF: 50.
A1 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 1: up to max concentration of 0.1%. processes with chemical risks.
A1 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. conc entration of 0.1%.
Dust mask, class P2, for harmful dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and re duce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 10.
Dust mask, class P3, for toxic dust and ozon concentrations below the treshold limit value. Form-retaining thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfort and better sealing. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. Fitted with adjustable, elastic headbands with closure. The new IonicAir filter technology reduces breathing resistance by 30%.
New generation demand valve with quick-coupling for compressed air apparatus. Demand valve that responds to lung demand very quickly and comfortably and switches to overpressure automatically upon the first breath. Maintains a constant overpressure of 3.9 mbar in the full face mask to prevent inwards leakage. For use in combination with full face masks 3S-Maxx and Ultra Elite Maxx as well as with G1 Maxx.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. Fitted with adjustable, elastic headbands. Without an adjustable nosepiece (metal-free) and extra wide headbanf for more comfort and a secure fit.NPF: 50.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask.
Set female and male coupling CEJN '342', 3/8"BSP. Equipped with screw thread. Combinable with compressed air hoses of 3M and filter unit AirCare of 3M.
ABE2K1HgP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentration of 0.1%.
Filter holder for use in combination with dust filter holder 501 for direct connection of dust filters 5911, 5925 and 5935 to 3M hal f and full face masks.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. NPF: 4.
Escape mask (halfface) with ABEKP2 filter. Protects against organic and inorganic gases, solvents, sulphur dioxide, acidic gases, am monia, organic ammonia derivatives and toxic dust, mist and smoke particles. Easy to put on. Working time: at least 15 minutes. Pack aged in plastic box for belt or wall attachment. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosp here. Shelf life: four years.
AX screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 260g.
FFP2 premium flat-fold mask. Exhalation valve. Practical individual packaging. Adjustable head band. Color: white. maximum breathability even with really high dust levels. Cannot be reused. Comfort features: exhalation valve reduces breathing resistance and build-up of heat and moisture in the mask. Flexible and adjustable nose clip. Soft sealing lip guarantees a secure, comfortable sealed position of the mask. Soft material edges for high wearing comfort. D label. Certified FFP2 face mask to EN 149.
Standard facial seal as spare spart of hoods M-106, M-107, M-306, M-307. No PPE.
Comfortable half mask in silicone with sealing profile for extra safety and longer life cycle. Remains soft and stable in shape even at extreme temperature (-10°C/+100°C)Equipped with ergonomically shaped head- and neckbands to accurately adjust the mask. Can be combined with gas filters 9100 to 9600. Filters 9010, 9020 and 9030 can be mounted on gas filters.
Expiration valve Cool Flow for series 6000, 6500 and 7500 masks.
Lightweight air hood with inegrated bumpcap and fire retardant face seal, for work where there are sparkels or hot particles. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50 and compressed air, with Jupiter, NPF: 500 with TR-300, TR-600 and TR-800.
Innovative compact folding mask with 7 dynamic parts providing excellent facial movement with maximum comfort. Valved and with inner foam for increased comfort for the wearer. DOLOMITE optional clogging test. An individual polybag and special flat shape make it easy to store and vending machine ready. Disposable mask FFP2 level, protects against solid and liquid particles of average toxicity. NPF:10.
Air regulator in Zytel (glass fibre reinforced polyamide) on belt for use in combination with 3M air hoods with bayonet coupling.Fitted with pressure reducer that eliminates any pressure fluctuations from the compressed air line, which provides improved comfort because the airflow remains constant. With regulator to adjust the air flow in the airhood. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 3.5 - 8 bar. NPF: 50 with M-100 and 200 with all other compliant hoods. Minimum airflow 170 l/min, max. 305 l/min.
Dust mask, class P2, for harmful dust, with layer of active carbon for ozone with concentration 10 x MAC. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding. Exhalation valve for lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. With internal nose pad for comfort. Fitted with non-adjustable, elastic headbands with closure. NPF: 10.
P filter for motor unit Versaflo. Protects against highly toxic dust, mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. Odors only if concentration below the MAC value. NO protection against gases, only comfort.
Front seal as spare spart of hoods M-406, M-407. No PPE.
Standard battery for TR-600. Weight 450 grams. Usage duration depends on filters used.
Dust mask, class P2 protects against solid and liquid particles of average toxicity. With exhalation valve for lighter breathing resistance and adjustable nose clip for optimized fit. Fitted with elastic headbands, ultrasound welded. NPF: 10.
Plastic ABEK2HgP3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives, and particulates.
Screen seal as spare spart of hoods M-106, M-107, M-306, M-307, M-406, M-407. No PPE.
Cover for TR-600 can be combined with filter TR-6710E.
A2P3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C , toxic dust, vapour and smoke particles.
P3 RD Elipse replacement filter for usage on Elipse Integra masks. Pack of 10 paires..
Air hood with safety helmet PC/polyester with hinged visor and fire resisteant Nomex full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 200 with compressed air, 500 with Jupiter or Versaflo. processes involving chemical risks.
Spark catcher as accessory for motor unit Versaflo. No PPE.
Protective foil for visor of 3M full face masks 6700S, 6800S and 6900S. Protects the visor against scratches and liquids. Suitable f or: processes involving chemical risks.
Charger for batteries LI-ON for Adflo motor unit. Batteries must be charged for four hours. risks.
Green compressed air hose, 10 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Plastic box for moldex mask.
PPE with CE - mark of class 3.
Transport box for full mask, such as Shogun. Equipped with practical shoulder strap. Ideal for dust-free storage of full face mask and filter, when they are not connected together.
Dust mask, class P2, for harmful dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the sh ape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moi sture in the mask. Fitted with non-adjustable, elastic headbands. Protection against acidic gases < MAC value thanks to active carbo n layer. NPF: 10.
Dust mask, class P2, for harmful dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. 5 years schelf life from date of manufacture.
Atex Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
Plastic ABEK2HgP3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives, mercury vapour and particulates.
Dust mask, class P1, for irritating dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. Various classes of the Gobi series can be distinguished based on the different colours of filter material on the inside of the mask. NPF: 4.
P3 filter with thread connection EN148-1 in ABS housing.
Full face mask G1 with rubber headgear, successor to Ultra Elite mask, light, compact with wide field of vision on pc coated lens, and neckband. Improved air flow in the mask. Size medium, other sizes available on request, quick coupler, adjustable headgear, fully serviceable with voice membrane.
Complete kit with Speedglas heavy duty welding helmet G5-01, welding filter G5-01TW, Adflo particle filter, adflo motor unit and carrying case.
Replacement hood for hood S-655.
ABEK1HgP3 + Formaldeyde filter in plastic housing for 3M full face masks. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, formaldehyde up to 10ppm plus toxic dust, vapour and smoke particles. Only for use with 3M full face masks. Class 1 gas filter: for max. concentration of 0.1%.
Foldable mask, class P2, for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non- adjustable, elastic headbands. Masks packaged separately. NPF: 10.
Air hood with PC/polyester safety helmet with hinged visor and Cordura full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 500 with Versaflo or Jupiter, 200 with compressed air.
Plastic box for moldex full face mask. Dimensions: 29x19x27,5cm
A2P3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65 °C, plus toxi c dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
Hose of strong neoprene that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. Length: 840mm. Not for Atex environments.
Screw filter A2P3 in plastic housing with standard thread connection DIN EN148-1. Suitable for protection against organic gases and vapours, such as solvents with a boiling point higher than 65°C, solid and liquid particles of toxic substances, radioactive substances and micro-organisms such as bacteria and viruses. These RSG filters are designed to provide exceptionally low breathing resistance and high comfort for extended use. The standard threaded connection ensures that they are also compatible with RSG's T-air motor unit and all masks with a standard threaded connection. Compliant: EN14387
Full set with Speedglass Heavy duty welding helmet G5-01 with welding filter G5-01/03VC, adflo motor unit for high altitudes, and carrying bag. Not suitable for use in confined spaces. The large clear visor (104x170mm) is curved and provides excellent visibility in all directions. The welding filter's natural color technology provides a lighter, more detailed and colorful view, and switches on/off automatically. The airflow is adjustable on the face, visor or anywhere in between. The helmet's slim profile and ergonomic design makes it even lighter and easier to work in tight spaces.
xABEK2HGP3 screwfilter DIN 148 in synthetic capsulation. Protects against organic and inorganic gasses, sulphur dioxide, ammonia and high toxic dust-, haze- and smoke particles and mercury vapors. To combine with full mask with standard screw thread. Filter of class 2: until max. concentration of 0,5 %. Weight: 370 gr. Convenient for: processes with chemical risks. In line EN 141.
External fire resistent collar as spare spart of hoods M-406, M-407. No PPE.
Complete kit with SR 500 fan unit and protective helmet SR 570, 1 protective film, standard battery, battery charger SR513, belt SR508, 2 pieces of SR510 P3 particle filters, 2 filter adapters, 10 prefilters SR221, 2 prefilter holder, flow meter, plug kit, cleaning tissue and user instructions. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
A2 filter protects against organic gases and vapours. Can be used in combination with the Adflo motor unit. If A2 filter is used in combination with Adflo dust filter, use of the heavy duty battery is recommended if 8 hours of operation on a single battery is desired. Class 2 gas filter: for max. concentration of 0.5%.
Long hose of lightweight PU that connects between Versaflo or Jupiter motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. PU hose, in combination with explosion-proof battery and Versaflo or Jupiter motor unit cover, makes a motor unit suitable for use in Ex zones. Length: 965 mm.
ABE2K1 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentration of 0.1%.
