BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 170 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Pre-filter for TR-600. Ensures longer life of main filter.
Dust filter protects against all types of particles (highly toxic dust, mist and smoke particles) Can be used in combination with the Sundström half and full face masks and motor units SR500/SR700. It's easy to combine this filter with gaz filters of this range. Clogging of the filter can only be detected through an increase of the (breathing) resistance.
Comfortable half-mask with sealing profile for extra safety and longer life. Fitted with ergonomically formed head and neck bands for precise adjustment of the mask. Large field of view due to placement of filters. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5 %. NPF: dependent on the filter used.
ABEK2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >6 5 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Only for use with full face masks with sta ndard threads. Class 2 gas filter: for max. concentration of 0.5 %.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(> <<)>(><(><<)>)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Reusable FFP Mask with a very low breathing resistance. AirWave® Pleated Filter for comfortable breathing and fatigue-free work. Longer use time, less consumption ProValve: Built-in valve, reduces condensation from exhaled air. Comfortable full-face seal made of washable TPE material which is gentle on the skin DuraMesh®: strong and durable structure, keeps the mask in shape. ActivForm®: no nose clip needed Length-adjustable loop strap with clip for quick, simple and safe on and off. Single packed, 5 pieces in box. Tested and certified to EN 149:2001+A1:2009 All Moldex products and packages are 100% free off PVC
AXP3 filter in plastic housing for 3M full face masks. Protects against organic gases and vapours with a boiling point <65 °C, plus toxic dust, vapour and smoke particles. Only for use in combination with full face mask, and filter is for one-time use only. Suitab le for: processes involving chemical risks.
P filter for TR-600 motor unit. Protects against highly toxic dust, mist and smoke particulates. Clogging of the filter can only be detected through an increase of the (breathing) resistance, motor unit will then sound an alarm.
Pre-filter for Sundström filters, if you change the pre-filter dayly, the life span of the P-filter wil be extended up to 10 times.
ABEK1P3 plastic filter housing with EasyLock connection for series 7000 and 9000 of Moldex. Protects against organic and inorganic gases and vapors with boiling point> >65 °C, sulfur dioxide, acid gases and vapors, ammonia and organic ammonia derivatives and toxic dust, mist and smoke particles. Filter Class 1: up to max concentration of 0.1%. +A1:2008.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Inside of mask equipped with comfort pad for better sealing. Equipped with individually adjustable, elastic head bands. NPF: 50.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speec h is conveyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry str ap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coup ling.
AB2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C. Can be used in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0. 5 %.
Comfortable half mask in TPE with integrated and replaceable particle filters . Sizes: S/M and M/L.
AX screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
Comfortable half mask in TPE with integrated safety goggle and replaceable particle filters . Sizes: S/M and M/L.
Motor unit Versaflo TR-302E+ can be combined with hoods of M and S series. Includes filter cover and air flow indicator. Can be combined with filters TR-3710, TR-3800, TR-3820 and BT-hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Battery, charger, air hose belt and filters can be ordered separately. Flow: 190L / min. Weight: 1095Gr with filter, belt, battery. NPF: depending on chosen hood.
ABE2K1 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point > 65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentrati on of 0.1%.
ATEX battery for TR-800. Usage duration depends on filters used. Can be charged with standard battery chargers TR-641 and TR-644. No PPE
Spark protector to protect filters against sparks.
Coarse pre-filter, to be mounted on filters of the ADFLO motor unit. Prevents rapid saturation of gas and dust filters. Very useful when working in very dusty areas. To be ordered per 80 pieces. No PPE.
Dust mask, class P2, for harmful dust, welding fumes, ozone and'unpleasant odours. Mask with nose bridge and seal along the entire e dge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistanc e and low levels of CO2 and moisture in the mask. Mask has rigid cup form for better retention of the shape of the mask. Fitted with adjustable, elastic headbands. Protection against ozone up to 10x MAC value. NPF: 10.
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter or Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For medium heavy applications. Respiration, face and head protection in one. Weight: 1000g. NPF: 50 with Jupiter, 200 with compressed air, 500 with Versaflo.
ABEK1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. risks.
Battery LI-ON, heavy duty, for Adflo motor unit. Allows approx. 8 hours of work if a combination of dust and gas filters are used on the Adflo motor unit.
Protects against ammonia and organic ammonia vapours. For use in combination with a half or full face mask with standard threads. Class 2 gas filter for maximum concentraiton of 0,5%. Weight: 175gr.
Backpack to carry the motor unit Versaflo TR-300, TR-600 and TR-800 comfortly on the back. Easy to clean and adjust.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
P2 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
ABE1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic and inorganic gases and vapors with boiling point >65°C and sulfur dioxide. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
ABEK2P3 screw-on filter DIN 148 in synthetic housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, toxic dust, vapour and smoke particles. Only for use with full face masks with standard threads and motorunit Proflow. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 370g.
Motor unit Versaflo TR-302E+can be combined with hoods of M and S series. With filter cover and air flow indicator. Heavy Duty Battery, charger,length adjustable air hose BT-30, dust filter and pre-filters are included. Can be combined with filters TR-3712E, TR-3802E, TR-3822E and BT- hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Flow: 190L / min. Weight: 1095 with filter, belt and battery. NPF: depending on chosen hood.
Lightweight air hood with inegrated bumpcap. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50, with Jupiter and compressed air, NPF: 500 with TR-300, TR-600 and TR-800.
Foldable mask, class P3, New Generationfor toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic woven headbands. Improved Cool Flow Comfort Exhalation valve provides even lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. This mask does not contain components of rubber latex and PVC. NPF: 50.
AB2E1 gasfilter in plastic housing for Moldex masks series 7000 and 9000for protection agains inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
High capacity battery as spare spart for motor unit Versaflo. 10 to 12 hours with new filter. No PPE.
Dust mask, class P2, for harmful dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Internal comfort pad for nose. With adjustable, elastic headbands. NPF: 10.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter! Suitable fo r: processes involving chemical risks.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. For use in combination with half and full face masks with standard threads.
High capacity battery for TR-600. Weight: 620 grams. Usage duration depends on the filters used.
Easy-to-clean belt for TR-600.
Dust mask, class P3, for toxic dust. Form-retaining mask thanks to Dura- Mesh shell on the outside of the mask. Mask always retains itsshape,even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhalation resistance and low levels ofCO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. The pleated filter technology reduces breathing resistance to 50%. Non reusable. Fitted with adjustable, elastic headbands with closure. packed per piece. NPF: 50.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. For use in combination with ha lf and full face masks with standard threads.
Foldable mask, class P3, for toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted w ith non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in t he mask. Masks packaged separately. NPF: 50.
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. Fitted with adjustable, elastic headbands. Without an adjustable nosepiece (metal-free) and extra wide headbanf for more comfort and a secure fit.NPF: 50.
Carry bag for full face mask 3S. With handy shoulder strap. Ideal for dust-free storage of full face mask and filter. Dimensions: 295mm x 200mm x 295mm.
Standard fabric belt as spare spart for motor unit Versaflo. No PPE.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against organic vapours < MAC value thanks to active carbon layer. NPF: 4.
P2 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M half and full face masks when used with filter holder 603 and dust filter holder 501. Protects against harmful dust, mist and smoke particles.
Retractable hose (525-850 mm) in PU for Adflo motor unit.
Comfort facial seal as spare spart of hoods M-106, M-107,M-206, M-207, M-306, M-307. No PPE.
Twin pack dust filter protects against highly toxic dust, mist and smoke particles. Can be used in combination with the Adflo motor unit. Clogging of the filter can only be detected through an increase of the (breathing) resistance.
Dust and spatter-proof wall storage box in impact resistant plastic for storage of full-masks in industrial workplaces. Blue model, with pictogram, includes wall mounting hardware. Dimensions: 236 x 315 x 200 mm.
A2 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 2: up to max concentration of 0.5%. processes with chemical risks.
Cover for TR-600 and TR-800 to be combined with filter TR-6110E and TR-6130E.
Innovative compact folding mask with 7 dynamic parts providing excellent facial movement with maximum comfort. Valved and with inner foam for increased comfort for the wearer. DOLOMITE optional clogging test. An individual polybag and special flat shape make it easy to store and vending machine ready. Disposable mask FFP2 level, protects against solid and liquid particles of average toxicity. NPF:10.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 4.
Dust mask, class P3, for toxic dust and ozon concentrations below the treshold limit value. Form-retaining thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfort and better sealing. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. Fitted with adjustable, elastic headbands with closure. The new IonicAir filter technology reduces breathing resistance by 30%.
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
Full-face mask Basic Plus is the economical version of full-face mask 3S. Mask made of very comfortable, high-quality rubber. Antifo g visor made of acetate, provides wide field of vision (80 %). Speech is conveyed via exhalation valve located just above the filter connection. The headband is easily adjustable, no carry strap for hanging the mask around the neck. Fitted with standard EN 148 thr eaded connection for filters or air hoses with matching coupling.
Standard facial seal as spare spart of hoods M-106, M-107, M-306, M-307. No PPE.
Full set ergonomic motor unit for air welding helmets with speed glass. With two dust and/or gas filters. Not for use in closed areas. Set includes a motor unit, standard Li-on battery, charger, air hose, pre-filter, dust filter and flow indicator. Equipped with visual and auditory low flow alarm. Battery life: approx. 8 hours, when used with dust filters. Flow rate: 170-200 l/min. Weight of motor unit: 1.16 kg. NPF: 500.
Plastic ABEK2HgP3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives, and particulates.
