BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Full-face mask specially designed for the Cleanspace CST system, quick and easy fitting, wide panoramic visor, inner mask made of soft silicone. This mask is NOT suitable for use in ATEX environments.
Compact filter to protect against suspended particles (dusts, mists and fumes), organic gases or vapours with a boiling point >65°C. Can be clicked directly into the motor units Cleanspace CST PRO and Ultra.
Neck support for Cleanspace CST.
Fabric head harness for Cleanspace masks.
Head harness non-fabric for Cleanspace masks.
Cleaning and storage plug set is designed for use with the CleanSpace CST PRO breathing air unit. It is an aid to seal all openings of the motor unit for storage. Do not carry the breathing apparatus when the plug set is in place. The plug set is made of polycarbonate and silicone.
Battery charger for PV-300E motor unit (phantom vision).
Kit of air duct S-960 that is placed on the supplied safety helmet G3000 and over which the hood S-605 pulls. Can be combined with the Versaflo motor units. Breathing hose and motor unit can be ordered separately.
Hood with air duct S-960 that is placed on the supplied safety helmet G3000 and over which the hood S-707 pulls. Can be combined with the Versaflo motor units. Breathing hose and motor unit can be ordered separately.
Versaflo air duct to be mounted on the 3M helmet G3000, and to be combined with hoses BT-20/BT-30/BT40, a Versalfo motor unit and one of the hoods S605/S-607/S-707, thus creating a complete head, respiratory and eye protection.
Complete kit with Speedglas heavy duty welding helmet G5-03 PRO AIR, adflo motor unit and carrying bag, without welding filter.
Comfortable combination safety goggle and half mask in TPE with replaceable low profile ABEK1P3 filters. For protection against most organic and arorganic gases and vapours, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivates, toxic dust, vapour and smoke particles metal fumes, mists and micro-organisms. Replacement filter: 1061777
Costs for a hotel stay if the trainer has to travel a long distance for an on-site training.
Neck support size small as a replacement part for Cleanspace Work.
Neck support size medium as a replacement part for Cleanspace Work.
Disposable and antistatic Chemprotex 300 chemical-resistant compressed air hood with a reusable and removable air system. It offers the highest level of protection against chemical particles and liquids. Designed to be worn over protective overalls. 10 year shelf life, airflow 210-400 ltr/min.
Air regulator with removable and washable strap, with a flow rate of 2 to 9 bar, for use with the Activeair Autoflow suits (1064302) and air cap (1064300). Equipped with a male CEJN coupling and an audible warning signal for low pressure.
Replacement shell for the welding helmet (outer helmet) G5-01, flip-up.
Escape hood with unfilled composite compressed air cylinder with constant airflow activated by opening the carrying bag. Quick and e fficient to use for a maximum escape time of 15 min. Suitable for environments where oxygen deficiency may occur.
SR500 motorunit with PVC belt drive to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Not for confined spaces. Flow rate: min. 175 or 240 L/min. Included: battery, battery charger, easy to clean PVC belt, 2x P filters, 2x filter adapters, 2x pre-filter holders, 10 prefilters, flow meter, user instructions, cleaning wipe, plug kit.Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
breathing hose tested and approved together with the following products, and intended for use with Sundström SR 500, SR 500 EX and SR 700 battery-powered fan units. • SR 200 Full Face Mask• SR 200 Compressed Air Feed Aviation Mask. SR 550 Plastic hose made of PU with a durable spring steel spiral. Chemical resistant. The hose comes with couplings
Head assembly harness for Sundstrom masks SR 200. No PPE.
scratch-resistant PC replacement visor for full mask SR200
Blue compressed air hose, 30 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Face seal speedglass 9100 air.
The Battery charger for all cleanspace models has interchangeable plugs for use in different countries.
Foldable mask, class P1, for irritating dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fit ted with non-adjustable, elastic headbands. Masks packaged separately. NPF: 4.
Dust mask, class P1, for irritating dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that the mask always retains its shape, even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhal ation resistance and low levels of CO2 and moisture in the mask. The valve also faces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands. NPF: 4.
Foldable mask, class P2, for harmful dust bulk packing. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non- adjustable, elastic headbands. NPF: 10.
Dust mask, class P2, for harmful dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that the ma sk always retains its shape, even when worn for extended periods or after folding the mask. Fitted with non-adjustable, elastic head bands. NPF: 10.
