BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
The Peltor COMTAC XPI is an active noise reducting ear muff. Has a 2-way radio communication in noisy environments.
Spare hood for the 3M fittest kit FT10 or FT30. No PPE.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Width: 2,54cm, lenght: 2,74m Not PPE.
Set of 10 quick spins with coil tether to attach tools.
Set of 10 spiral cords with hook and quick ring. Length: relaxed 7,6cm, extended 157,5 cm. For tools with max weight of 0,9kg.
Lightweight and quick to deploy shelter. Fully inflatable, can be set up in a few minutes and will stay standing without continuous inflation, nor mechanical frame. These shelters are lightweight and compact to transport and to store. Dimensions: 400x400x250cm. Weight: 58kg.No PPE.
Hygiene set for hearing protector VERISHIELD VS130D/VS130M
Very comfortable seat harness specially developed for the oil and gas industry. Features ultra-lightweight aluminum D-rings, Belly Board attachment points. Transit buckles, integrated trauma straps, seat with D-rings for upright support. Reflective material and orange bands for high visibility. Repel strap, revolver vertical torso adjusters, and hybrid comfort pads and extended 30cm back anchor point. Maximum user weight including material: 140kg. Sizes: M-L-XL. Compliant: EN361, EN358, EN813
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
The new 3M™ PELTOR™ ComTac™ VII headset is designed to allow for dual hearing protection. It can be used in combination with 3M™ PELTOR™ TEP-300 earplugs, or passive earplugs. A new headband design helps to make transition between rail mounted systems and headband easier. It can also help to improve comfort when worn under a ballistic helmet. Natual Interaction Behavoiur (NIB), helps to improve close range face-to-face communication in steady state noise environments.
Utilizing near field magnetic induction, the 3M™ PELTOR™ System Control Unit helps to improve cable management through cord-free connection to the 3M™ PELTOR™ ComTac™ VII Headset, and 3M™ PELTOR™ Tactical Earplugs, TEP-300. There is also a port for an optional wired connection to the 3M™ PELTOR™ ComTac™ VII Headset. The SCU is equipped with three com ports for radios and intercom systems, and is designed to handle multiple radios with multiple channels. The SCU is also available with Bluetooth® technology. The SCU can be remotely operated via a wireless remote control unit (RCU). It is designed to be mounted on a picatinny rail, but can be placed elsewhere. Besides using the remote as a push-to-talk PTT, it can also be used to adjust the volume level of the environmental listening or radio. No PPE.
Flame-retardant dungarees with a thin lining, so that they comply with electric arc IEC 61482-2 class 2. Adjustable suspenders with concealed fix-lock closure and elastic at the back. Chest pocket with flap and key ring. inner pocket. Side pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket and concealed key ring. ruler pocket. Pre-shaped knees with height-adjustable knee pockets on the inside. Completely metal-free. Quality: Tera TX, 260 g/m². Available colors: Navy. Available sizes: 44-64, 146-156, 96-120 SCA. Complies with: EN ISO 11612 A1+A2 B1 C1 E1 F1, EN 1149-5, EN ISO 11611 Class 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 2, ELIM: 15.0 cal/ cm², ATPV: 18.0 cal/cm².
Women's inherently flame retardant T-Shirt with increased visibility and 20% recycled cotton. Round neck. With heat seal reflection. Quality: Cantex Jersey AT, 180 gsm. Available sizes: S-2XL. Available Color: Navy/Yellow. Complies with: EN ISO 14116 and EN 1149-5.
Fully inflatable life raft in PU for 3 people, light and easy to carry. Exceptionally stable, can be used at low tide. Can be quickly inflated. Suitable for rescue on water. Dimensions: 256 x 117 x40 cm. Dimensions when folded: 88x35x30 cm. Weight 17 kg.
Complete kit contains, SR 500 fan unit, SR601 hood, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
The 3M™ X5 Lamp Holder is designed for mounting (mining) lamps on 3M™ industrial safety helmets and consists of a dark gray ABS part and 2 strips of 3M™ VHB™ double coated pressure sensitive adhesive. When properly attached to an industrial safety helmet, the slot can accommodate multiple brands of lamps. Not certified seperately as PPE.
The 3M™ Premium 4 Point Chin Strap X5-P4PTCS2 has a magnetic buckle and features an exclusive selector function to switch between EN397 or EN12492 safety standards. No PPE.
As spare part of the RigRat.
TYVEK® IsoClean® hood with ties. option MS Clean-processed and gamma-sterilized. Bound seams. Bound hood opening for low particle shedding. Full face opening. Ties with loops for adjustable fit. Packed in a dual barrier validated packaging system (double bagged). White. Available sizes: one size For cleanrooms up to ISO 5, GMP A/B CLEAN PROCESSED + STERILE.
Tyvek® IsoClean® IC183B TS Coverall Bound seams, bound neck, raglan sleeves. Covered elasticated wrists and ankles. Single packed. White. Available sizes: 2XS - 7XL (2XS, XS, 4XL, 5XL, 6XL <(>&<)> 7XL are made to order. Terms <(>&<)> conditions apply.) For cleanrooms up to ISO 5, GMP A/B. STERILE ONLY.
Coverall – CTL428CM • Zipper closure • Tunneled elastic on wrists (with thumbloops), ankles, and back half of waist Available sizes: S - 3XL For cleanrooms ISO 4-6 CLEAN MANUFACTURED AND NON-STERILE
Navy blue disposable nitrile glove. Powder-free and latex-free. Ambidextrous, with roughened fingertips. Designed for use in laborat ories and research environments. Version with long cuff.
Multifunctional safety helmet for working at heights and rescue work. With MIPS technology, which combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Light ABS helmet shell offers a high level of protection and durability. The 6-point textile suspension offers optimal fit and comfort. Euroslot adapters (30 mm) on the side for fitting earmuffs. Clamps for attaching extras with an elastic band, e.g. goggles and LED light for climbing helmet. Head circumference: 51-63cm .Conforms to EN 397, MM, LD, -30°C / EN 12492 .
The Fitted Polo Rewear is part of the Rewear collection: a fully sustainable and circular clothing package. This polo is made of 50% Bio-cotton and 50% Recycled Polyester. MATERIAL 180 g/m² 50% organic cotton / 50% recycled polyester Piqué Available colors: black Available sizes: XS - 5XL
Mobile anchor point made of sharp edge tested webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1 metre. Anchor point for protection of 3 persons with a maximum weight of 300kg.
Softshell jacket with Breathing System technology by Geox. Detachable hood with triple adjustment, 2 side pockets, 1 front pocket with zip and an inner pocket with Velcro closure. Longer at the back for a better fit. Drawstring to adjust the waist. Ergonomic sleeve with adjustable cuffs. Water column: 5000 mm. Breathability: 5000 mvp. Available sizes: XS-4XL Available colors: Asphalt Grey
The Glacier is based on our Nash, one of our bestsellers and a top quality, reliable, very comfortable rain jacket. This ARC class 2 jacket is perfectly wind and waterproof and now has the Sustainable Sioen label, which means that we have adapted the design and confection to reduce the impact on the environment. For example, we have reduced the weight of the fabrics used, replaced the former cotton with renewable TencelTM Lyocell and adapted the confection to make it easier to recycle at the end of its life. In addition, we have made the repair easier so that the life of the garment can be extended. Complies with: EN 61482-2 Class 1, EN ISO 11612 A1.A2.B2.C2.F2., EN ISO 11611 class 1 - A1/A2, EN 1149-5, EN 13034, EN ISO 20471, EN 343 3.3 Available sizes: S-3XL Available color: fluo yellow/navy
Kernmantle rope diameter 12.5mm. For individual use or in combination with rope clamp AC4000, AC4001 or AC4002
Protects against organic and inorganic gases and vapours sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives.
Universal lower mast for high capacity davit system, already equipped with the (1045265) adapter to mount the winch advanced
A high-float‚ one size fits all PFD, which can outfit your whole emergency response team. With all the essential safety features, it's quick to adjust for a secure and safe fit. Failsafe shoulder webbing and heavy duty ripstop material make this buoyancy aid strong and durable for extended service. Featuring a size adjustable UCLan harness (Patent GB2492084) for safe release every time.
Sporty goggles, OTG compatible and very wide panoramic view. Frame consists of 35% recycled material. Headband consists of 45% bio-based material (Castor oil) and 60% recycled yarn. Equipped with a clear polycarbonate lens, which consists of 71.5% mass balanced polycarbonate: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. PCF (Product Carbon Footprint) = 0,20kg CO².
Air regulator suitable for working in ATEX environments, mounted on a belt and equipped with flow meter and warning whistle. Regulator provides continuous air flow and serves as a connection between the Sundström half- and fullface masks and the compressed air hose.
Fall arrester with 2 self-retracting lanyards that can be attached directly to the back of most harnesses. Provides continuous fall protection and extra mobility when moving from one location to another. Replaces the double lanyard and improves safety by shortening the fall distance. With 2 aluminum large (63.5 mm) Comfort Grip hooks (can be attached crosswise to, for example, the beams of ladders) and 1-pin SRL coupling made of galvanized steel. Max user weight including material: 140 kg.
Motor unit can only be combined with dust filters SR510 or SR710 (P3 filters) and air hoods and half and full face masks from Sundström. Flow rate: 175 or 225 L/min. Equipped with visual and audible alarm in case of dust filter saturation or low battery. Includes: motor unit, belt, charger, battery,2 filteradapters, 2x P3 filters, 2 pre-filter holders, 10 pre-filters, flow meter. Battery charging time: 0-80% capacity in 30min. battery autonomy depending on filter and set air flow 4-7 hours. NPF: depending on the cap used.
Yellow stainless steel anchor point for wind turbines, rotable with stainless steel mointing hardware. Use for 1 person included gear with maximum weight of 140 kg.
Boot with epoxy coated steel 200J toe cap. Provided with a oil-resistant and vulcanized rubber sole, extremely slip-resistant, energy absorption in the heel. 100% water resistant and adaptable height. Washable up to 40°C. Easy to put on and take off by "hands free removal". Resistant to heat up to 300°C. Polyester lining, washable insole. Sizes: 35-50.
Stainless steel carabiner automatic closing, opening 22.5 mm, weight: 230 gr. Breaking force: 25kN.
Replacement earplugs for Caboflex.
K1 filter in plastic housing for 3M half and full face masks. Protects against ammonia and organic ammonia derivatives. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. concentration of 0 .1%.
Head protection made of Tecaweld, a mix of 75% cotton and 25% Kevlar fibres. To be used with the full helmet system to protect the user from welding sparks and spatter on the top of the head. For use with Speedglas 100 and 9000 series welding helmets.
Charger for batterie of motorunit Proflow SC and EX.
Connection piece for S-series air caps. Connection piece for attachment on back of cap which makes that the air tube can be attached to the cap. Also needs a sealing ring to attach.
Double Step Chrome-plated with 2 steps
Visor in metal mesh with edging in metallised tape, to be combined with SCR CARRIER HELMET ALU FR CENTURION for a perfect fit on the Centurion Vulcan helmet. It shields the face from radiant heat. Size: 500x250mm.
Replacement spare part, for use if the original air duct becomes worn out or dammaged during use.
Hygiene set for hearing protector FM Radio, Radio XP en WS Alert XP headsets. Replacement cup cushions to ensure a proper tight seal for optimum protection, as well as new foam inserts. Each Hygiene kit contains 2 x foam inserts and 2 x cup cushions which can be replaced in a few easy steps. Not certified seperately as PPE.
Harness for heat applications made from Nomex on Kevlar carrier with 2 anchoring points. Combustion temperature 425°C. Easy to put on due to delta shape on the back. Test weight: 140 kg, Sizes U-XL.
StokoDerm Silicone Free Hand Cream for protecting and conditioning skin combat occupational skin disease, the second largest nonfatal occupational illness. StokoDerm® is ideal where both oil and water hazards are present. It contains the skin protective against, Eucoriol® for rough, dry hands. Content: 1000ml. Old name: Stokoderm Twinprotect 1000ml To be used in dispensers 1032479
● Phone pocket ● Mounted back pocket ● Back fold for more freedom of movement ● Radiolus for attaching a radio ● 8 storage bags ● UPF 50+ fabric blocks 98% of UV radiation ● Folding rule pocket ● Durable polyester / cotton cloth for high performance and maximum carrier comfort Available colors: Green, navy, yellow, royal blue, gray, black and red. Available sizes: S-2XL.
Set of ballistic spectacles. Case is supplied with 3 PC lenses: clear, smoke and yellow. Srtap is also supplied inside the case. Lenses have a PLATINUM coating: anti-scratch and anti-fog on both sides.
