BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Breathing hose for connection to the motor unit PF-602E
Protective foil for visor on Shogun full-face mask. Protects the visor against scratches and liquids.
Scott full face mask made of high quaulity elastomere. With standard connection for screwfilter EN148. Large anti-damp PC visor. NPF 2000 with motorunit. In line with EN12942
P3 dust filter from 3M for attachment to 3M secure click gas filters when used with dust filter holder D701. Protects against harmful dust, mist and smoke particles.
A2 filter in plastic housing for 3M half face masks Secure Click. Protects against organic gases and vapours with a boiling point >65 °C. Dust filters series 7900 can be mounted on gas filter if dust filter holder D701 is used. Class 2 gas filter: for max. concentration of 0.5%.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, M-206 hood, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(><)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Output for 2 persons / compressed air hoses to be installed on Aircare filter system.
Head harness as spare spart of hoods M-106, M-107. No PPE.
Replacement battery for motor units PF-602E and PF-602E-ASB
Dust filter holder for attachment of dust filters secure click series D7900 to 3M secure click gas filters. No PPE.
Connection joint for expiration valve for full face masks of the 6000 series 3M.
Fit test adapter for testing the fit of a 3M personal mask. Only suitable for use with bayonet mounted filters.
Dust mask, class P2, for irritating dust. Mask without nose bridge vut whit seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with adjustable, elastic headbands. NPF: 10.
Charger for batterie of motorunit Proflow SC and EX.
Connection piece for S-series air caps. Connection piece for attachment on back of cap which makes that the air tube can be attached to the cap. Also needs a sealing ring to attach.
Sealing ring for S-series air caps which permits to attach the connection on the hood.
Hose of lightweight PU that connects between Jupiter or Versaflo motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S- series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. PU hose, in combination with explosion-proof battery and Versaflo orJupiter motor unit cover, makes a motor unit suitable for use in Ex zones. Length. Length: 735 mm.
Buttons for the frame of the screen as spare spart of M-series hoods. 10pc
This ready-to-use kit includes a PF-602E-ASB powered breathing system, FF-602 full face mask, 2 x particulate filter PFR 10 P3 DT-1235E, SS-6600 pre-filters with holder, SC-BT-56-ASB breathing hose, PF-653 filter port caps, PF-972 waist belt, PF-972 air flow indicator and PF-641E battery charger. Compatibler with 3M filters DT series.
Combination of safety helmet G3001, air duct S-960 to be attached to the helmet and chemical resistant hood with shoulder cover S-805E. Can be combined with Versaflo air hose and Versaflo motor units, or V-500E for working on compressed air. This combination is extremely suitable when respiratory protection needs to be combined with a safety helmet.
Compensation per trainer who comes on-site for a 3M training.
Fold Mask P3 for toxic dust. Comfortable three-piece folding mask with soft edges to increase comfort. With non-adjustable elastic headbands. Exhalation exhalation and lowers low C02 and humidity in the mask. Masks are packaged separately. NPF: 50.
Set for performing a personal fit test for dust masks. Set contains test liquid, sprayer and hood. Test person puts on dust mask and hood, then the test liquid is sprayed inside the hood. If the wearer can taste the test liquid, the mask has not been fitted proper ly or the mask does not seal sufficiently for that person. Test can also be performed without hood.
Spare hood for the 3M fittest kit FT10 or FT30. No PPE.
K1 filter in plastic housing for 3M half and full face masks. Protects against ammonia and organic ammonia derivatives. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. concentration of 0 .1%.
Air deflector as spare spart of hoods M-306, M-307, M-406, M-407. No PPE.
Vaporiser to vaporise liquid in hood of fit test FT10.
Pre-filters for powered air respirators can extend the life of 3M™ filters by capturing large particles that would otherwise clog the filter.
A1P3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C , toxic dust, vapour and smoke particles.
Blower caps to protect the PAPR from dust and contaminent entry when no filters are attached.
Disposable cover for motorunit Proflow.No PPE.
Bitter test liquid (low concentration)for performing fit test. Content: 55 ml.
P2 dust filter from 3M for attachment to 3M secure click gas filters when used with dust filter holder D701. Protects against harmful dust, mist and smoke particles.
P3 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.
2 sealing ringlet to cover the Pro 2000 filters after use. No PPE.
P2 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.
