BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
ABEK1P3 filter in plastic housing for 3M Secure Click half face masks. Protects against anorganic and organic gases and vapours with a boiling point > 65°C, sulphur dioxide, acidic gasses and vapours, ammonia, organic ammonia derivates and toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%.
Kit to connect Peltor hearing protection to the Versaflo hoods M-series.
A2P3 screw filter DIN 148 in plastic housing. Protects against organic gases and vapors with a boiling point >65 ° C, toxic dust, mist and smoke particles. Combinable with half-or volmasker standard threaded or motor unit series PF-600E. Filter Class 2: up to concentration of 0.5%. Weight: 230 gr.
Frame of the screen as spare spart of hoods M-106, M-107, M-306, M-307, M-406, M-407. No PPE.
Leather belt as spare spart for motor unit Versaflo. No PPE.
Dust mask, class P2, for harmful dust and ozon. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against ozon 10 x MAC value thanks to active carbon layer. NPF: 10.
Disposable S-922 visor protectors (tear offs) for breathing hood S-600, S-700 an S-800. Prevents wear and damage of the visor.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar. Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Model on base. Can be ordered with 3-way output 1002713 and 1014794 couplers. For use with compressed air hoses with maximum lenght of 10m.
Radiant heat resistant protection seal for breathing tubes BT. No PPE.
Chin strap as accessory of hoods M-206, M-207, M-306, M-307.
Replacement filters for flowstream air regulator. AK filter that removes unpleasant odours and taste from compressed air. Suitable f or: processes involving chemical risks.
external high resistent collar as spare spart of hoods M-406, M-407. No PPE.
Dust mask, class P3, for toxic dust and nuisant levels of acid gas benath the TLV. Mask with nose bridge and seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Mask has rigid cup form for better retention of the shape of the mask during use. Fitted with non-adjustable, elastic headbands. NPF: 50.
New multi charging station for 3 batteries, high capacity, as accessory for motor unit Versaflo TR-600 and TR-800. Without power supply.
Replacement hood for breathing hood S-855E in PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.
P1 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M h alf and full face masks when used with filter holder 603 and dust filter holder 501. Protects against irritating dust, mist and smok e particles.
Output for 3 persons / compressed air hoses to be installed on Aircare filter system.
Head harness as spare spart of hoods M-306, M-307, M-406, M-407. No PPE.
Large sized full face mask made of high quaulity elastomere. Can be used as a negative pressure mask with standard connection screwfilters and is also compatible with the 3M Versaflo TR-600 ane TR-800 powerd air systems including particulate, gas and vapour and combination filters. The PC visor provides a good field of vision and the front-mounted speech diaphragm helps provide communication. The 5 point rubber head harness helps provide a secure stable fit and the side-fitting filter and clear inner mask help ensure good downwards visibility.
3M™ Versaflo™ BT-63 Length Adjusting Breathing Tube is designed to be used with 3M™ Full Facepiece Respirators 7907 S Series, 6000 Series, and half face masks 7500 Series and the 3M™ Versaflo™ Powered Air Purifying Respirator TR-600 and TR-800.
Fire-resistent seal for the head shell as accessory of hoods M-106, M- 107, M-306, M-307. No PPE.
AE1HGP3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C ,sulfur dioxide and hydrogen chloride, mercury and toxic dust, vapour and smoke particles.
Plastic carry bag with belt for protecting half masks against dust and dirt. Can be worn over the shoulder or around the waist. Suit able for: processes involving chemical risks.
Screwfilter AXP3 only to use with motorunit Proflow 3 EX120 (1033156).
Air supply system for use with compressed air line in combination with 3M half-face or full face masks. For use only with 3M filters to mount on half-face or full face masks for situations in which supply from compressed air line is cut off or for protection under a decontamination shower. Not for use in confined spaces. Working pressure: between 3 and 7 bar. NPF with half-face mask: 50, NPF with full face mask: 200.
Very sturdy motor unit in impact-resistant plastic to be combined with head covers. To be used with 2 dust and/or gas filters with standard DIN 148 thread; these filters can also be used on half-face and full-face masks. Class 2 gas filters work as class 1 filters when used with these units, max. concentration is therefore 0.1%. Device is equipped with a low-flow alarm and electronics for maintenance. Not for confined spaces. Battery life: approx. 7-15 hours. Flow Rate: min. 160 L/min. Weight: 1.4 kg. NPF: dependent on the mask used. Included : battery, charger and comfort belt.
Lightweight breathing hood made of WEB 24 with PE visor. Hood with double neck and shoulder protection so the inner hood can be tucked inside the clothing. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 310 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.
Filter cover in ABS as spare part for motor unit Versaflo. No PPE.
Cover for expiration valve for full face masks of the 6000 series of 3M.
Uncoated polycarbonate screen as spare spart of hoods M-106, M-107, M-306, M-307, M-406, M-407. No PPE.
Silver coloured, metal glasses frame to click into 3M series 6000 and 7000 masks, corrective lenses not included.
This ready-to-use kit includes a PF-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1235E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger. Compatible with 3M filters DT-Series.
Test liquid for performing fit test. Content: 55 ml.
Set for performing a personal fit test for dust masks. Set contains test liquid, sprayer and hood. Test person puts on dust mask and hood, then the test liquid is sprayed inside the hood. If the wearer can taste the test liquid, the mask has not been fitted proper ly or the mask does not seal sufficiently for that person. Test can also be performed without hood.
Front seal as spare spart of hoods M-306, M-307, M-406, M-407. No PPE.
P filter for TR-600/TR-800 motor unit. Protects against highly toxic dust, mist, smoke particles and irritating odours. Clogging of filter only be detected through an increase in the (breathing) resistance, motor unit will then sound an alarm.
Lightweight breathing hood made of WEB 22 with PC visor. WEB 22 material captures particles, preventing the particles on the wearer from getting onto the work piece. Hood with double neck and shoulder protection so the inner hood can be tucked inside the clothing. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For spray painting applications, special raw material of hood and visor can be cleaned with thinner. Weight: 315 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.
User-friendly full face mask with filter connection on the side (standard thread - EN148-1), easy to adjust headband. Suitable for use with 3M powered breathing systems.
High quality P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. In plastic housing for extra protection against spatters.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Suitable for wall mounting. Can be ordered with 3 way 1002713 and 1014794 output clutches. For use with compressed air hoses with maximum length of 10m.
Sweat band for hoods from S-600 and S-700 series, and for S-950.
Bitter test liquid for performing fit test. Content: 55 ml.
Cover for TR-600 can be combined with filter TR-6820E.
The 3M ™ Versaflo ™ BT-64 Breathing Hose is a heavier and more robust breathing hose with a fixed length to use for heavy work. This BT-64 Breathing Tube connects approved 3M close-fitting facepieces to 3M motor-powered systems to ensure clean air reaches the facepieces with unrestricted airflow. The breathing tube is supplied with the 3M ™ TR-973 Air Flow Indicator. The BT-953 cleaning and storage kit can be ordered separately. For use with 6000 and 7907S series full face masks, and 7500 series half masks in combination with the Versaflo TR-600 and TR-800.
This ready-to-use kit includes a PF-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1135E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger.
Sweat band for air caps, S-133, S-333, S-433 and S-533.
Air cooler with neoprene cover on belt for use in combination with 3M airhoods with bayonet coupling. With regulator to adjust the airflow and temperature in the air hood. Can cool air up to 28 °C. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 4 - 8 bar. Minimum airflow 170 l/min, max. 500 l/min. processes involving chemical risks. NPF: 50 with M-100 and 200 with all other usable air hoods.
Radiant heat cover to cover head and shoulders for airhoods M-300.
Extension for the easy-to-clean belt for motor unitTR-600.
New Multi charging station for 3 batteries, high capacity, as accessory for motor unit Versaflo TR-300. Without power supply.
Foldable mask, class P2, New Generation for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. With handy lips to unfold the mask easily.Fitted with non-adjustable, woven elastic headbands. Improved Cool Flow Comfort exhalation valve provides even lower exhalation resistance and lower levels of CO2 and moisture in the mask. Masks packed separately. This mask does not contain components of rubber latex or PVC.NPF: 10.
Air heater with neoprene cover on belt for use in combination with 3M airhoods with bayonet coupling. With regulator to adjust the airflow and temperature in the air hood. Can heat air a maximum of 28 °C. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose in rubber of PU to hood not included. All usable buttons are made blue. Inlet pressure: 4 - 8 bar. Minimum airflow 170 l/min, max. 500 l/min. NPF: 50 with M-100 and 200 with all other hoods.
Plastic carry bag with belt for protecting full face masks against dust and dirt. Can be worn over the shoulder or around the waist.
Spare part for motorunit TR-800.
Plastic carry bag with belt for protecting full face masks against dust and dirt.
Dust mask, class P2, for irritating dust. Mask without nose bridge vut whit seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with adjustable, elastic headbands. NPF: 10.
Insert for prescription glasses for full face mask Promask. No PPE.
Plugs designed for Versaflo hoses BT. These are used to prevent contamination of the hoses when they are stored. Pack of 5 Pieces. No PPE.
A2P3 filter in plastic housing for 3M Secure Click half face masks. Protects against organic gases and vapours and toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5%.
Front seal as spare spart of hoods M-106, M-107. No PPE.
Storage box for motorunit kit proflow asbestos: 1058093
Light bracket in durable polymer, can be used with a series of wired and wireless mining lamps. Easy to install and adjust for a desired lamp corner. For example, designed that the visor of the M-series air hoods can be lifted without removing the lamp.
Head harness in butyl/NR as a replacement for the FF-600 mask. Clean with a damp cloth and household detergent.
