BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Expiration valve Cool Flow for series 6000, 6500 and 7500 masks.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 4.
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
Set female and male coupling CEJN '342', 3/8"BSP. Equipped with screw thread. Combinable with compressed air hoses of 3M and filter unit AirCare of 3M.
Front seal as spare spart of hoods M-406, M-407. No PPE.
A2P3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C , toxic dust, vapour and smoke particles.
Lightweight air hood with inegrated bumpcap and fire retardant face seal, for work where there are sparkels or hot particles. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50 and compressed air, with Jupiter, NPF: 500 with TR-300, TR-600 and TR-800.
Filter holder for use in combination with dust filter holder 501 for direct connection of dust filters 5911, 5925 and 5935 to 3M hal f and full face masks.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. NPF: 4.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask.
Standard battery for TR-600. Weight 450 grams. Usage duration depends on filters used.
Atex Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
Screen seal as spare spart of hoods M-106, M-107, M-306, M-307, M-406, M-407. No PPE.
Cover for TR-600 can be combined with filter TR-6710E.
Air hood with safety helmet PC/polyester with hinged visor and fire resisteant Nomex full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 200 with compressed air, 500 with Jupiter or Versaflo. processes involving chemical risks.
P filter for motor unit Versaflo. Protects against highly toxic dust, mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. Odors only if concentration below the MAC value. NO protection against gases, only comfort.
ABEK1HgP3 + Formaldeyde filter in plastic housing for 3M full face masks. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, formaldehyde up to 10ppm plus toxic dust, vapour and smoke particles. Only for use with 3M full face masks. Class 1 gas filter: for max. concentration of 0.1%.
Replacement hood for hood S-655.
Dust mask, class P2, for harmful dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the sh ape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moi sture in the mask. Fitted with non-adjustable, elastic headbands. Protection against acidic gases < MAC value thanks to active carbo n layer. NPF: 10.
Green compressed air hose, 10 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Air regulator in Zytel (glass fibre reinforced polyamide) on belt for use in combination with 3M air hoods with bayonet coupling.Fitted with pressure reducer that eliminates any pressure fluctuations from the compressed air line, which provides improved comfort because the airflow remains constant. With regulator to adjust the air flow in the airhood. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 3.5 - 8 bar. NPF: 50 with M-100 and 200 with all other compliant hoods. Minimum airflow 170 l/min, max. 305 l/min.
Disposable protective cover against contamination by splashes and spray mist, for Versaflo TR-600 and TR-800.
Spark catcher as accessory for motor unit Versaflo. No PPE.
A1 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. conc entration of 0.1%.
Air hood with PC/polyester safety helmet with hinged visor and Cordura full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 500 with Versaflo or Jupiter, 200 with compressed air.
Long hose of lightweight PU that connects between Versaflo or Jupiter motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. PU hose, in combination with explosion-proof battery and Versaflo or Jupiter motor unit cover, makes a motor unit suitable for use in Ex zones. Length: 965 mm.
Charger with power supply as accessory for motor unit Versaflo TR-300, can be expanded with multi-charging station TR-342-3 to charge up to 10 batteries.
Protective foil for visor of 3M full face masks 6700S, 6800S and 6900S. Protects the visor against scratches and liquids. Suitable f or: processes involving chemical risks.
Foldable mask, class P3 for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. With handy lips to unfold the mask easily. Fitted with non-adjustable, elastic woven headbands. Masks packaged separately. This mask does not contian any components of latex rubber, or PVC. NPF: 50.
P2 dust filter from 3M for direct connection to 3M half and full-face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter!
External fire resistent collar as spare spart of hoods M-406, M-407. No PPE.
Tool to fix the atex battery TR-830 to the Atex motor unit TR-802E. No PPE.
Foldable mask, class P2, for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non- adjustable, elastic headbands. Masks packaged separately. NPF: 10.
xABEK2HGP3 screwfilter DIN 148 in synthetic capsulation. Protects against organic and inorganic gasses, sulphur dioxide, ammonia and high toxic dust-, haze- and smoke particles and mercury vapors. To combine with full mask with standard screw thread. Filter of class 2: until max. concentration of 0,5 %. Weight: 370 gr. Convenient for: processes with chemical risks. In line EN 141.
Set of 3 replacement filters for Aircare filter unit.
Hose of strong neoprene that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. Length: 840mm. Not for Atex environments.
Internal collar as spare spart of hoods M-406, M-407. No PPE.
Lightweight breathing hood made of WEB 24 with PE visor. Hood with neck and shoulder protection. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. With internal knit collar under the hood for better sealing. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 310 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.
Foldable mask, class P3 for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic woven headbands. Masks packaged separately. This mask does not contian any components of latex rubber, or PVC. NPF: 50.
Protective cover disposable for air tube in PU convenient for air caps.
Charger for 4 batteries.
Charger with power supply for 1 battery of the motor unit TR-600/TR-800, can be expanded with multi-charging station TR-642E-3 to charge up to max 10 batteries.
Fire resistant protection seal for breathing tubes BT. No PPE.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. Protection against organic vapour s < MAC value thanks to active carbon layer. NPF: 4.
AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6100FC.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. To be combined with half and full-face masks with standard threads or Proflow SC motor unit. Weight: 450 g.
Interior mask with nosepiece valve for full facemask 6800.
Radiant heat cover to cover head and shoulders for airhoods M-400. No PPE.
Male rectus threaded coupling for equipping V-500, V-100 and V-200 with male coupling.
Replacement hood for hood S-657.
Durable leather belt for TR-600/TR-800
Turning mechanism for the screen as spare spart of hoods M-106, M-107, M-306, M-307, , M-406, M-407. No PPE.
Belt, decontaminable, as spare spart for motor unit Versaflo. No PPE.
Cover for TR-600 can be combined with filter TR-6310E.
Lightweight disposable breathing hood with hood made of PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.
REAKTORHGP3 screw-in filter DIN 148 with plastic case. Protects against radioactive iodine, highly toxic particles, and smoke and haze particles. For use with a full-face mask and standard thread. Weight: 307 g.
ABEK1P3 filter in plastic housing for 3M Secure Click half face masks. Protects against anorganic and organic gases and vapours with a boiling point > 65°C, sulphur dioxide, acidic gasses and vapours, ammonia, organic ammonia derivates and toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%.
disposable S-920 visor protectors (tear offs) for breathing hood S-133, S-333, S-433 and S-533. Prevents wear and damage of the visor.
Disposable S-922 visor protectors (tear offs) for breathing hood S-600, S-700 an S-800. Prevents wear and damage of the visor.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar. Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Model on base. Can be ordered with 3-way output 1002713 and 1014794 couplers. For use with compressed air hoses with maximum lenght of 10m.
