BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
U-shaped base for Davit arm. Width adjustable from 1,9m - 2,6m.
Cap for fixed base davit arm. No PPE.
Floor base for davit arm with boom. For permanent attachment to concrete or a metal construction. Opening for davit fitted with hard PVC sleeve to allow davit arm to pivot more smoothly. W 30,48 x L 30,48 x H 24.1 cm. Other floor bases or a mobile base for the davit arm are available on request.
Removable leg paddings for more comfort. Fits all new models of 3M ™ Protecta® harnesses. No PPE.
Double fall-stop device 2.5 metre strap with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Also useful for fall factor 2.
Double elastic lanyard with scaffold hooks, tested for a maximum user weight of 130 kg and suitable for use with sharp edges.
Evacuation sling made of polyester/cotton with adjustable shoulder straps. Can easily be fitted to unconscious person. For safe evac uation of a person requiring assistance, in combination with an evacuation device such as made by Rollgliss. The three ends are brou ght together and connected to a single carabiner in order to evacuate the person.
Kernmantle rope Rollgliss 9MM
Very robust fall-prevention device, 9 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 9 kg.
Very robust fall-prevention device with winch, 9 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 12 kg.
Fall-stop device 2.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for extremely sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Set of 25 2.5 cm diameter rings to attach to apparatus of maximum 0.9 kg when working at height. Not PPE.
183 cm tray for attaching tools with a maximum weight of 15.9 kg to avoid tools falling when working at height. Provided with a loop on one side and a carabiner with safety lock on the other side. Not PPE.
Anchor lance, synthetic material, extendible from 1.8 to max. 7.8 metres. Forms an anchor point in combination with carabiners with AP168 cord. Ideal for attachment of a temporary vertical safety line for safe vertical movement. Temporary vertical life-line with line clamp, can be attached to eye of carabiners. Anchor lance cannot be removed until protection is no longer required. Weight: 2.5 kg.
Descending and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably to be used with seat harnesses. Ideal for enclosed spaces.
Core jacket rope of 15 meters and 10.5mm diameter with a knot at one end and a musketon at the other, available in various lengths. Conforms to EN353-2
Fall arrest block Rebel 15 metres stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. Both for vertical and horizontal usage, if horizontal usage it is mandatory to use a 2 metre webbing sling (art 1026475).
Padded cordura provides for durability and comfort. Waist size S/L (71cm -117cm) No PPE.
Wall base for davit arm with boom. For permanent attachment to concrete or a metal construction. Opening for davit fitted with hard PVC sleeve to allow davit arm to pivot more smoothly. Dimensions: W25.4 x D 19 x H 32,4 cm. Other feet or mobile bases for the davit arm are available on request.
Davit mast 144 cm, to be combined with boom, base, fall-block and/or descent winch and accessories.
Adaptor to connect the old davit arm with the new fixed base No PPE.
Chain set: 7.92m chain, carabiner and mesh bag. As a replacement part for the tripod AM100.
Equipement carrying and storage bag duffels style bag (300x500mm). Built-in adjustable webbing shoulder strap. Drawstring closure, durable canvas construction, compact and lightweight design.
Fall arrest device Rebel 12 meters galvanized steel cable with integrated shock absorber. Plastic housing. Stops any vertical falling movement almost immediately. Serves as a connection between anchor point and harness. Equipped with ergonomic cable handle and carabiner with fall indicator that allows you to know when a fall has occurred. For vertical <(>&<)> horizontal use.
To create attachment point on tools. For material lighter than 0.9kg. Always use with Python Safety Quick wrap tape. Not PPE.
- For tape measures - Includes a retractor - Sleeve allows tape measures to be safely tethered and holstered - Reflective details
Set of 10 clip to clip coil tether non conductive. To attach tools safely and to prevent they drop from height. Extended lenght: 70cm
Set of 10 belt loops with trigger hook attachment to attach tools up to 2.3kg.
Extra deep, with innovative self-closing system, making it almost impossible for parts to fall out of the bag. Easy to take things out because no extra action is needed to open the bag.
Black carrying bag made of nylon coated with TPU. Dimensions: 50x24x24cm.
Winch for descents or rescue. Max load 204kg. To be used in combination with Davit-system or AM100 tripod. Handle to be used in 2 different ways (reduction 4 and 9:1). Best used in combination with suspension harness. To be used in confined spaces.
Very robust fall-prevention device, 15 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 12 kg.
Rescue and descent device with rotating wheel and 9.5 mm kernmantle rope for rescue or evacuation of you, a second person or any victim from height. The hand-wheel serves to lower or retrieve victims. Suitable for rescue operations in hard to access locations and heights.
Fall arrest block Rebel 20 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage.Weight: 10kg.
Compatible with all ISO certified containers. Provides an elevated anchoring point, allowing free fall requirements to be reduced. Provides a total fall protection solution, even for a single container. No tools or adjustments to container required. Height: 1.25m. Weight: 12 kg. Always combine with fall-block.
To anchor tools to avoid tools falling when working at height. Max weight: 15.9 kg. Not PPE.
Adaptable to most walkie-talkies and phones. With D-ring. Can be attached to a belt or harness Not PPE.
Descending and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably use with seat harnesses. To be operated with a drill. Not for use in enclosed areas.
Anchorage for I-beams ranging from 30.4 to 91 cm. Maximum thickness of beam 6.5 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Davit mast 533 mm, to be combined with boom, base, fall-block and/or descent winch and accessories.
- For tools with max weight of 2,3 kg - With 2 carabiners - Line stays staut when reaching, retracts when not in use - With swivel housing connection
Holster to fit virtually any hand-held radio, mobile phone and many other devices. With clip2loop coil tether and micro D-ring. No PPE.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Sold per pack of 10. No PPE.
Descent/evacuation kit Rollgliss with 9.5 mm core rope with reduction 5:1 that makes retrieval and descent lighter. Total rope length should be divided by 5 to know the usable rope length. To be hung from the eyes of Rollgliss or other anchoring points. Can only be used with the supplied line clamp which must be operated by a second person, not for self-descent. Max descent capacity: 250kg, max raising capacity: 200kg. Hoisting a person with the R350 is only permitted in combination with the AM100 tripod.
Fall arrest device 2.4-metre strap with integrated shock absorber in backpack style with 2 self-locking hooks. Plastic housing. Stops almost instantly any vertical fall movement. Serves as connection between anchor point and harness. Also usable at fall factor 2 and tested for use near sharp edges.
Rope clamp for kernmantle ropes from 8 to 13 mm. Facilitates lowering of hoisting of a person using the Rollgliss system if the clamp is mounted on the rope of the Rollgliss. In compliance with: EN341.
Safety lanyard without absorber. 1M braided rope in white polyamide with diameter 10,5mm. Rope with 2 sewed thimble loops, identification thread and yellow and red wear indicator. Only to use for positioning.
Very robust fall-stop device: 10 metre galvanised steel cable, with integrated shock absorber and descent brake. Casing made of coated aluminium. Immediately stops any vertical fall. Serves as connection between anchor point and harness. Equipped with carabiner hook. After a fall, the brake ensures the person descends at a constant speed automatically. This mechanism can be activated in advance or remotely (provided a rescue rod is used). Only for vertical use. Weight: 8.5 kg. Maintainable.
Very robust fall-prevention device with winch, 25 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 23 kg.
Descent and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably to be used with seat harnesses. Ideal for enclosed spaces.
Anchorage for I-beams ranging from 6.35 to 60.92 cm. Maximum thickness of I-beam: 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Free-standing counterweight anchor that can easily be placed on top of a roof to form a point of attachment for one employee. Includes sixteen cast iron weights of 20.3 kg, a base plate, a pole and a D-ring.
Mast adjustable from 1.20 to 2.13 m with rotating head & materials. Including bracket for a winch. Ideal for applications where where a tripod cannot be used. Can be suspended from anchor point in ceiling or other structure. Combined with base (Art: 1026260) and winch or fall-block.
