BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
I-beam trolley for I-beams ranging from 9 to 35.5 cm. Maximum thickness of beam 3.2 cm. For horizontal use. Suitable for 1 person with max weight (gear included: 140kg). Atex approved. Can be used in combination with a safety line or fall-block.
Comfortable, lightweight and breathable padding for better comfort and shoulder and back protection. Can be easily mounted and removed by the user. Fits all new models of 3M ™ Protecta® harnesses. No PPE
Very comfortable fall protection harness with 2 attachment points on the back and chest, positioning belt and D ring at the navel for descent. Full D chest anchor point. Leg and shoulder straps are easily adjustable. Extra lining on shoulder and leg for greater comfort; also easy to put on. Chest and leg straps fitted with quick release belts. Straps made of wear and abrasion resistant Repel webbing. Harness is very easy to put on. Integrated fall indicator.
Harness with two attachment points: on the back and on the chest. Chest and back attachment point using D-ring. Leg and shoulder straps adjustable. Ideal for welding as raw material is Kevlar fabric blended with highly durable, heat resistant and flame retardant modacrylic fibres. Available in S, M/L or XL.
Fixed anchor point for 1 person. Mounting possible in wall, floor and ceiling. Anchoring D-ring: 12 mm attachment. Can be loaded in 3 directions. During installation, this must be tested at 6kN, this can be done by our fixed fall protection team. Contact us for a tailor-made offer. According to EN795 A.
Winch for descents or rescue. To be used in combination with AM100 tripod. Galvanised cable. Best used in combination with suspension harness. To be used in confined spaces.
Fall arrest block Rebel 15 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 7,5kg.
Harness with two attachment points: on the back and on the chest and quick release buckles. Chest and back attachment point using D-ring. Leg and shoulder straps adjustable. Ideal for welding as raw material is Kevlar fabric blended with highly durable, heat resistant and flame retardant modacrylic fibres. Available in S, M/L or XL.
Shoulder and back padding for XE50 fall harnesses. Protects the shoulder straps and offers more comfort when wearing the harness.
D-ring combination concrete, sturdy design for heavy conditions. Safe 'hook up' indicator lets the user see if it is properly installed. Install in holes of 18 or 19 mm. Only standard drilling required.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 0.8m. Anchor point for protection of one person.
Tool cord 30.48 cm with carrying capacity up to max. 4.5kg. There are trigger hooks on both sides of the line, these rotate around a spindle so that the rope cannot become tangled. Pack of 10 items. Not PPE.
TOOL CINCH ATTACHMENT with two wings - 15.9 kg maximum carrying capacity
Double safety line of 2m with large hooks (50mm) for welders. Protection of damper against heat and combustion, up to 371°C. Straps reinforced with Nomex/Kevlar which provides protection against combustion.
Lanyard, 1,5 meter length, consisting of elastic strap with integrated shock absorber and fall indicator. Fitted with 1 standard carabiner and 1 carabiner large opening.
Temporary horizontal lifeline in galvanised steel with a maximum length of 18 meters. Lifeline using line tension can be stretched between two points. Equipped with a snap hook to the hard plastic case and a carabiner on the end of the cable to be attached to various structures with anchor points. Housing provides a sturdy zinc handle with the carabiner attached to it. Weight: 11.25kg. Lifeline Thickness: 6.25mm. Strength: 24.5Kn. Serves 2 persons.
Adapter for mounting sealed block on davit arm and tripod KM1PT7 (1032166)
Comfort tool belt. Extra padding for comfort. Modular design for flexible carrying options. For safe storage of tools while working at height. Size: L/XL (36-44cm) Not PPE.
Long reacht davit arm with a range of 70cm to 113cm high capacity. Short and long reach davit arm high capacity can only have 1 davit mast extension. Complete davit (mast extension + davit arm) can be used on any fixed or portable davit base high capacity. Authorised SRL and winch can be mounted front or back whether on the universal lower mast or davit mas extension. Can be used for persons as well as loads with a maximum of 205 kg with portable bases, or 340 kg with fixed bases. For fall arrest applications: 2 users (max 140kg max each), for rescue applications: 1 user (max 140 kg max.).
Window & door groove anchor: Adjustable from 55 to 130 cm width. Non-penetrating design, does not damage the construction. The anchor is simply compressed between two vertical sides of structure. Quick and easy to install with built-in settings button, no tools or drilling required.
Safety line 1.5 metre made of kernmantle rope with integrated shock-absorber Serves as connection between anchor point and harness.
Set of 25 quick rings with diameter of 3,8cm for tools with maximum weight of 0,9kg and that have pre-drilled holesin them. No PPE.
The 3M™ DBI-SALA® Utility Pouch is constructed from heavy-duty 22 oz. duck canvas and features two side ears that are designed to hold spud wrenches and sleever bars. Two inner pockets are included in the pouch for additional tools. Tools can be tethered to two D-rings on the front of the pouch, or to an additional D-ring inside the pouch.
Unique sleeve design conforms to the size of virtually any drill battery.Sleeve is cinched to the drill, allowing the drill to be tethered off while being used at height.
- Elastic lanyard for tools - Hook on one side, loop on the other side - Max load rating: 4.5kg - Lenght: min 81cm to max 119cm when fully extended
Descent/evacuation kit Rollgliss with 9.5 mm core rope with reduction 2:1 that makes retrieval and descent lighter. Total rope length should be divided by 2 to know the usable rope length. To be hung from the eyes of Rollgliss or other anchoring points. Can only be used with the supplied line clamp which must be operated by a second person, not for self-descent. Max descent capacity: 200 kg, max raising capacity: 100kg. Hoisting a person with the R350 is only permitted in combination with the AM100 tripod.
Safety line, 2 metre length made of kernmantle rope, with integrated shock absorber and scaffolding hook. Safety line tested according to sharp side test and thus extremely reliable for use near sharp edges. Serves as connection between anchor point and harness.
Belt lanyard with karabiner.
1/2 day training anti-fall protection by 3M (Capital Safety) at the training center of 3M for a group of 8 persons.
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted.
Line only suitable for positioning, not for fall protection. With line clamp to easily adjust the length, also for area limitation, can also be used as a horizontal lifeline. Adjustable length, rope diameter: 11mm
Very comfortable positioning harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Extra lining on shoulder and leg straps for greater comfort and ease. Chest and leg straps fitted with quick release facility with lock. Standard version with trauma loops on leg straps for deployment after a fall. Harness is very easy to put on. Integrated fall indicator.
Manual winch to facilitate casualty retrieval. Can only be combined with the Rollgliss R350 with rope control device and the AM100 tripod. Weight: 4 kg.
Positioning belt with pass-through buckle and padding.
Anchorage for I-beams ranging from 6.35 to 30.48 cm. Maximum thickness of beam 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
• Innovative self-closure system that traps objects inside, the pouch makes it nearly impossible for objects to fall out once placed in the bag.• Easy to retrieve objects since no opening or closing is necessary.• Compatible with most tool belts. Belt loops
To create attachment point on tools. For material lighter than 0.9kg. Always use with Python Safety Quick wrap tape. Not PPE.
Adjustable wrist band with velcro.
Tool-bag with D-ring and 2 pull-outs. Hook and loop closure system. Loops to attach to belt strap. Easy to open even when wearing gloves. Maximum weight: 2.3 kg Not PPE
Hammer holster with hook and loop to keep the hammer securely in place so that the tool does not fall when working at height. With reflective details. Maximum weight hammer: 2.3 kg Not PPE
Descending and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably use with seat harnesses. To be operated with a drill. Not for use in enclosed areas.
Sling sleeve anchorage system for temporary anchoring around a rigid support. Diameter:6 mm , lenght: 2m. In Line with EN795
Double safety lanyard with 2 big snap hooks and 1 automatique carabiner. Lenght 1,30m. Not to use in case there is risk of falling from heights. In line with EN354
Adaptor to connect the fall arrester rebel with winch 15m to the new davit arm. No PPE.
Set consisting of 1-point harness (size M/L), Nano-lok 2G fall arrestor of 2M with scaffold hook (1034477) and backpack (1032246) with product overview card. Max user weight: 140kg.
Mobile anchor point in 25mm wide polyester webbing, tested for sharp edges. Anchor point for security of 3 persons or maximum 300kg. Breaking strenght: 22kN
Very robust fall-prevention device with winch, 15 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on davit arm via adapter. For 1 person, max. 150 kg. Weight: 15 kg.
Rescue fork extendible to 4.8m to work from a distance, and allow a person who has fallen descend with a fall-block Ultra-lok RSQ. The descent button can be operated remotely.
Fall-stop device 2.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Also useful for fall factor 2 (horizontal).
Case in neoprene for roller meters. Fits most roller sizes. Provided with a clip to attach to a belt strap or holster. Ideal when working at height Not PPE.
Python scaffold wrench holster (belt)with retractor and ext-H2LBungee.
The 3M™ DBI-SALA® pocket holster with roll-up mechanism is a belt holster with a roll-up mechanism at the back. This holster is ideal for tape measures and other small hand tools. Not PPE.
Fall arrest block Rebel 25 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 13kg.
Double fall-stop device 2 metre strap with integrated shock absorber with scaffolding hook on side with fall indicator. Plastic casing. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Also suitable for fall factor 2.
Constructed from a heavy-duty canvas with an inner lining to prevent punctures, with multiple inner pockets and integrated D-ring makes tehtering tools easy. Magnetic closure system. Dimensions: 22,2cm x 30cm. No PPE
Set of 10 adjustable wristbands with cord to attach tools.
1/2 day on-site training fall protection by 3M. Content and location according to your needs.
