BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Welding and heat-resistant glove, Fully lined, 1,2-1,4 mm, Split cowhide of top quality, Split cowhide of top quality, Jersey, Cat. II, Yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for heavy work. EN Compliance: EN 388:2003, 3143 EN 407:2004, 41324X
Stylish multinorm HI-VIS softshell with hood. Quality: 60% modacrylic, 38% polyester and 2% carbon, 350 gr / m². available sizes: XS-5XL. Available colors: Hi-vis yellow/navy. Compliant with: EN-1149-5, EN ISO 20471 class 2, EN ISO 11612, EN 13034, EN ISO 11611 and IEC 61482.
A light jacket that offers you a very high level of protection, including ARC protection. This hi-vis Kaldvik rain jacket is made out of the new lightweight (280 g/m²) Siopor® Excell fabric. Different linings can be zipped in this soft and supple jacket. Furthermore, the Kaldvik has many practical features like the possibility of attaching a hood (available separately), narrowing the sleeve ends, 1 chest pocket, 2 inside pockets and a practical zipper grip for easily opening and closing the jacket. Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Welding glass in mineral glass. Dimensions: 51X108mm.
Gray flame-retardant PU coating on 1 side, for strength and slip resistance. For light welding and grinding work. Vertical use. Free of asbestos. Short-term temperature resistance up to 600°C. Approved according to EN13501-1.
Practical plastic hearing protector (di-electric) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Cut resistant lined welding glove made of durable soft goat leather with Kevlar seams.
Dust mask, class P2, for harmful dust, with layer of active carbon for ozone with concentration 10 x MAC. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding. Exhalation valve for lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. With internal nose pad for comfort. Fitted with non-adjustable, elastic headbands with closure. NPF: 10.
Lightweight / Comfortable and breathable fabric, soft <(>&<)> supple / Inherently flameretardant properties / Very good moisture management properties / Non-allergenic and harmless to the skin / Reinforced seams for an increased durability and longer lifetime / Higher abrasion resistance / dimensionally stable / excellent pilling resistance. Quality: 31% polyester + 28% modacrylic + 20% aramid + 20% viscose FR + 1% AST. Available colors: Hi-Viz orange/navy. Available sizes: SHORT 48 - SHORT 58 - REGULAR 44 - REGULAR 64 - LONG 46 - LONG 56.
Gray flame-retardant PU coating on 2 sides, for strength and slip resistance. For light welding and grinding work. Vertical and horizontal use. Free of asbestos. Short-term temperature resistance up to 600°C. Approved according to EN13501-1
Flame retardant coverall in Cantex Weld on the front and sleeves, and in Cantex Stretch on the back. Cantex Stretch gives the overall flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The coverall has increased visibility. Concealed front zip. Two walkie-talkie loops. Chest pockets with flap, right pocket with tool loops and concealed key ring for ID card holder. Side pockets with flap. Height-adjustable knee pockets. Back pockets with flap. Ruler pocket with flap. Adjustable cuffs with press studs. Elastic at the waist. Contrast stitching. Quality: Cantex Stretch, 365 g/m² + Cantex Weld, 365 g/m². Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1B1C1E3F1, EN ISO 11611 A1 Class 2, EN 1149-5, IEC 61482-2 Class 1 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²), EN 13034 type PB [6 ].
Welding glove made of high-quality split cowhide leather with cotton lining and heat-resistant Kevlar seams.
Automatic welding cassette with three automatically darkening welding filters. Width of welding filter: 73x107mm. Battery life: 2000 hours.
These hi-vis trousers stand out with their double-stitched reflective FR strips and fluorescent colour. Extremly light with high protection. These trousers with arc protection are anti-static and offer excellent protection against heat and metal splashes. In addition, these comfortable and practical trousers with five pockets are made from a light, inherently flame-retardant, breathable and supple fabric with moisture-regulating properties, harmless to the skin. Available colors: Hi-Viz orange/navy. Available sizes: SHORT 48 - SHORT 58 - REGULAR 44 - REGULAR 64 - LONG 46 - LONG 56.
Flame retardant jacket Laruns with arc protection: Straight collar; Zip closure under flap; 2 patched chest pockets with flap; 2 inset pockets with flap; 2 loops for gas detectors; Round sleeves; Sleeve narrowing; Extended back; Welded, segmented reflective tape. Quality: 24% PES + 75% cotton + 1 AST; ± 250 g/m². Available sizes: 44-64. Available colors: Navy/fluo yellow. Conform: IEC 61482-2 : 2009 class 1 - ATPV 8.4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E1 F1, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008 and EN 13034 : 2005 + A1 : 2009 Type PB [6].
Scratch resistant, tempered mineral glass for protection against welding spatter. Dimensions: 108x51mm.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
Hood for welders, 100% cotton Proban®, 340gr./m²,flameretardant,quilted flameretardant wool on the top,a cord closure around the face. Sizes: 1 size.
Set female and male coupling CEJN '342', 3/8"BSP. Equipped with screw thread. Combinable with compressed air hoses of 3M and filter unit AirCare of 3M.
The Com4-fit has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 200 pairs, each pair in a separate bag. Colours: light orange.
Comfortable bump cap made of flame retardant Proban material, with modern 'casual' baseball cap look. Full peak. With woven ventilat ion opening along the side. Size: 54-62cm.
Welding goggles with white lens and Supravision HC-AF coating (extremely scratch resistant on the outside and prevents condensation on the inside. 100% UV-resistant). Flip up lens in grey polycarbonate with Infradur AF coating (offers protection against harmful UV and IR radiation when welding without altering colours, thanks to the grey lens (EN172). With anti-vapour coating on the inside and extremely scratch-resistant on the outside).
Complete kit with Speedglas heavy duty welding helmet G5-01, welding filter G5-01TW, Adflo particle filter, adflo motor unit and carrying case.
Parka with hidden zipper with hidden snaps, 2 front pockets with flap, 2 inset chest pockets with right chest pocket with D-ring for badge holder, detachable hood with drawstring, zip-in lining is available separately, escape mask loop, cuffs with Velcro, extended back, reflection band. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin binding + DWR, 280 gr / m2. Available sizes: S-3XL. Available colors: corn blue / navy, gray / blue, black / gray and gray / red. Complies with: EN 1149-5, EN 13034 type 6, EN 343 3: 2, IEC 61482 class 2, EN ISO 11611 class 1 and EN ISO 11612 A1A2.B1.C1.E2.F1.
A2 filter protects against organic gases and vapours. Can be used in combination with the Adflo motor unit. If A2 filter is used in combination with Adflo dust filter, use of the heavy duty battery is recommended if 8 hours of operation on a single battery is desired. Class 2 gas filter: for max. concentration of 0.5%.
The choice of professionals: maximum protection for arc welding. Ideal in shipbuilding and construction sectors, folding glass holder size 50x108mm. Weight: 521gr. Easy adjustable headband, perfect comfort, leather chincup available. Supplied with welding glass DIN 10.
Flame retardant and antistatic ladies pants in strong inherent flame retardant material with an increased visibility at the bottom of the legs. Concealed zip, 2 deep side pockets, 2 back pockets with flap, folding ruler pocket, separate leg pocket and knee pockets. Available sizes: 36-46 EU. Available color: navy. Compliant with: EN ISO 11612 A1A2B1C1E3F1, EN 1149-5, EN ISO 11611 Class 1, EN 13034-6, IEC 61482-2 Class 1 (ATPV: 15 cal / cm²) PPE category 3.
Flame retardant trousers Barcus with arc protection: Front fly with zip closure; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket; 1 gusset pocket; Elasticated waist; Knee pockets; Waistband with loops for belt. Quality: 24% PES + 75% cotton + 1 AST; ± 250 g/m². Available colors: Blue/fluo yellow. Available sizes: 48 S - 58 S - 44 R - 64 R - 46 L - 56 L.
Replacement visor (anti-fog and hard coating) for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01. 5-piece packaging. No PPE.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. - Stretch elements M-Move - Industrial laundry Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Fluo yellow/Grey. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
Green compressed air hose, 10 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Durable anti-cut quality leather welding gloves in cow split leather water and oil replleant for beter heat resistance. With waterproof and breathing membrane. Excellent protection of fore arm due to a 15 cm long heat resistant leather cuff. Sizes: 8-9-10-11.
Parka Gore Tex Diablo multinorm: - 2 front pockets; - 1 napoleon bag; - 1 breast pocket; - 1 inner pocket. Quality: PES / CARBON WITH GORE PYRAD TECNOLOGY Available sizes: XS-3XL. Available colors: Fluo yellow / navy, fluo yellow / gray and fluo orange / gray. Compliant with: EN 343 4:4, EN ISO 20471 class 2/3, EN ISO 11612, EN ISO 14116, EN 13034 type 6, EN 1149-5 and IEC 61482-2 class 2.
Welding vest FR08: Protects against radiant, convection and contact heat; 100% Metal Free; Industrial wash at 75°C and machine dry 155°C; Flame Retardant Industrial Washable Striping; antistatic; Extended back for more protection; Radio loops for easy attachment of a radio; Velcro adjustable cuffs for a snug fit. Quality: Bizflame Ultra: 80% Cotton, 19% Polyester, 1% Carbon Fiber 340g. Available colours: Gray and Royal Blue. Available sizes: S-3XL. In accordance with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 1 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 Class 1, EN 13034 Type PB [6] and ASTM F1959/F1959M-12 ATPV 16 CAL/CM2 (HAF 83.7%).
This multinorm work jacket has a regular fit. The twill weave makes this jacket very strong. The multinorm jacket has an ergonomic fit and pleasant wearing comfort. Quality: 25% polyester and 1% carbon. Available colors: Navy. Available sizes: XS-5XL. Conforms to: EN 1149-5: 2018, EN 11611: 2015, EN 13034: 2005, EN ISO 11612: 2015, IEC 61482-2: 2009.
Women's Casma trousers with ARC protection: Closure with 1 hidden button / Front fly with zipper 2 inset pockets with flap and press stud fastening 1 ruler pocket with flap closed by hidden press studs elastic waist knee pockets Waistband with belt loops Double stitched (2x2) flame retardant reflective striping (50mm). Quality: 79% FR cotton + 20% PES + 1% AST; ± 350 gsm. Available sizes: 36-56. Available colors: Navy. In accordance with: IEC 61482-2: 2009 Class 1- ATPV 15.2 cal/cm², EN ISO 11612: 2015 / A1A2B1C1E3F1, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008 and EN 13034: 2005 + A1 : 2009 Type PB [6].
Professional Outdoor Neyfik spray fire extinguisher class 5A/21B. Very compact and effective extinguisher suitable for burning liquids and solids. The spray is supplied with a vehicle holder. Each spray extinguisher also contains a check schedule that, if desired, can be used to perform periodic checks. The spray extinguisher is completely maintenance-free and has a lifespan of 5 years. The spray is supplied with a vehicle holder. This model contains French text excluding control schedule. This model is also available with Dutch text including inspection schedule (art. 1044623).
Compresses for very rapid first aid for burns in the acute burning phase. 20 x 20 cm. Three year shelf life.
Offshore work jacket Ramea with arc flash protection: Upright collar; Hidden popper fastening; 2 patched breast pockets with flaps; 2 patched side pockets with flaps; 2 loops for gas detectors; Sleeve narrowing by means of press studs; Extended back. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g / m². Available sizes: 44-64 EU. Available colors: Navy. Conforms to: IEC 61482-2: 2009 class 1 - ATPV 9.4 cal / cm², EN ISO 11612: 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116: 2015, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008 and EN 13034: type PB [6].
Multinorm ladies' softshell Heika with arc protection: Straight collar; Zip closure under flap; 2 inset pockets; 2 loops for gas detectors; Round sleeves; Sleeve narrowing; Elongated back tail; Flame retardant reflective segmented striping (50mm). Quality: 3-layer softshell: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: XS-2XL. Available colors: Fluo orange/navy and fluo yellow/navy. Compliant with: IEC 61482-2 : 2018 APC1 - ATPV 24,3 cal/cm², EN ISO 11612 : 2015 / A1 B1 C2 F1, EN ISO 14116 : 2015 / IND.3, EN ISO 11611 : 2015 / Class 2 - A1, EN 1149-5 : 2018, EN 13034 : 2005 + A1 : 2009 Type PB [6], EN ISO 20471 : 2013 +A1 2016 / Class 2 and EN 14058 : 2017 / Class 1 3 x x.
Flame retardant work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. Available sizes: 44-64, 84-120, 146-156 SCA. Available color: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Premium quality boot covers made of split cowhide leather. The strong material protects the feet and lower legs when welding and is designed to last in the toughest environments. Class 2 welding protection Designed with a comfort fit Designed to be worn in a tough work environment CE certified This product is sold in pairs UKCA marked Shell Fabric : Split Cowhide Leather, thickness 1.3 mm Available sizes: one size
Trousers, ME - 75% cotton 24% polyester 1% antistatic, 2/2 twill weave, 360 gr/m², zipper, 2 inset side pockets with flap, back pocket with flap, ruler pocket with flap, thigh pocket with flap, elasticated back, legs with adjustable press-studs.
Inox scissors (20cm) for cutting fabric or paper. Does not cut in skin.
Multirisk trousers with concealed zip, 2 inset side pockets, 1 back pocket with flap, 2 thigh pockets with flap, knee pockets, elastic at the waist. Quality: 79% / 20% / 1% Kat / Poly / AS. Available sizes: 44-66 HAV. Available colors: Blue / gray, gray / yellow and black / gray. Conforms to: EN 1149-5, EN 11611 class 1 A1, EN 11612 A1 B1 C1, EN IEC 61482-2 class 1.
This multinorm Dapro coverall is tough and comfortable. The coverall has an adjustable elastic at the waist for the perfect fit and a front closure with a welding proof flap construction. Available sizes: 44-70 NL. Available colors: Navy and royal blue
Automatic welding helmet from the G5-01 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. Adjustable airflow distribution with three automatically darkening welding filters. Width of welding filter: 73x109mm. Battery life: 1500 hours.
Lightweight and comfortable welding shield, maximum protection when welding overhead, 50x108mm glass holder, weight 382gr, one of the lightest shields on the market. Supplied with welding glass 10DIN.
Superlight spectacle with side shields and a perfect, pressure- free fit. Lens angle and temple length are size adjustable. Frame in black/green synthetic material. Fitted with a grey polycarbonate lens: welding lenses are protection from harmfull UV and IR radiation. With Infradur Plus coating: High-tech coating, scratch resistant on both sides, fog-free on the inside and minimise damage from welding sparks.
Balaclava in 44% meta-aramid/42% viscose FR/6% tencel/3% para- aramid/3% antistatic fibre/2% elasthane. Large opening in front for eyes. Available sizes: 1 size. Available colour: paris blue.
Multirisk Softshel Diablo: Invisible zip at the center front; Raglan sleeves; 1 vertical chest pocket; 2 front pockets; 1 inner pocket; 2 slanted reflective bands on the front and back and sleeves; 1 vertical reflective band on each shoulder; Bottom with elastic cord and cord stopper. Quality: 34% MODACRYL, 28% POLYESTER, 21% COTTON, 16% PU, 1% ANTI-STATIC. Conforms to: EN 1149-5: 2008, IEC 61482-2 class 1, EN ISO 14116: 2015 IND 3, EN 13034: 2005 + A1: 2009 TYPE PB [6], EN ISO 11612: 2015 A1 B1 C1 F1, EN ISO 20471: 2013 + A1: 2016 CLASS 2 and EN ISO 11611: 2015 A1 CLASS 1.
Short jacket with concealed zip and concealed press studs, 2 front pockets with flaps, 2 inset chest pockets, back pleats for extra freedom of movement, escape mask loop, extra insert at armpits to promote freedom of movement, cuffs with velcro, extended back and reflective tape. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin weave + DWR, 280 gr / m2. Available sizes: 44-66 Havep. Available colors: Black / gray, gray / blue, cornflower blue / navy and gray / red. Conforms to: EN 1149-5, EN 13034, type 6, EN ISO 11611 class 1, EN ISO 11612 A1B1C1E2F1 and IEC 61482-2 (front class 2, rear class 1).
Flame retardant softshell Umia with arc protection: Straight collar; Zip closure under flap; 1 patched chest pocket with flap; 2 inset pockets; 1 loop for gas detector; 1 loop for badge; 1 Napoleon pocket; Round sleeves; Sleeve narrowing by touch and close fastening. Quality: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-3XL. Available colors: Navy/fluo yellow.
Cut resistant and comfortable welding glove in reverse goat leather, with Kevlar lining and seams.
This premium quality welding trouser is made from split cowhide leather and stitched with para-aramid thread. It offers enhanced protection to the wearer when welding and is designed to last in the toughest environments. Made with cowhide leather for a premium finish Class 2 welding protection Button front closure Wider belt loops for wider belts Designed to be worn in a tough work environment CE certified UKCA marked Shell Fabric : Split Cowhide Leather, thickness 1.3 mm Available sizes: S - 3XL
Durable anti-cut quality leather welding gloves in cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 8-9-10-11.Length cuf: 15 cm.
Multinorm RWS trousers with hidden zipper, 2 inset side pockets, back pocket with flap, ruler pocket with flap, thigh pocket with flap, pre-shaped easily accessible knee pockets with opening at the top lockable with flap and Velcro and length seam. Quality: 50% / 49% / 1% polyester / cotton / carbon + DWR, 295 gr / m2. Available colors: Fluo orange. Available sizes: Size range 44-66. Complies with: EN 1149, EN 13034, EN ISO 11611 class 1, EN ISO 20471 class 1, EN ISO 11612, IEC 61482 class 1.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Fluo yellow/Grey and fluo yellow/navy. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
The Vaski is a hi-vis ladies rain jacket which also offers a high degree of protection to the wearer. The jacket is made out of a light, but high quality fabric and complies to many international standards such as IEC 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5 and EN 13034. This premium jacket is equipped with a YKK zipper with handy grip for easy opening and closing. The sleeve ends are preshaped and the back is extended for your comfort. Available sizes: XS-2XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Head protection, large, for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01
Automatic welding helmet suitable for most welding applications up to shade 12. This helmet has permanent protection against harmful IR and UV radiation regardless whether the filter is dark or light. This helmet has 3 dark shade number levels and 3 user selectable levels of detector sensitivity.
Hood in 100% polyester with Gore®Pyrad® textile technology (ePFTE membrane). Laminated, to be combined with parka Ebro. Available sizes: S-3XL. Available colours: hi-viz yellow, hi-viz orange, hi-viz red.
Overall Industry flame-retardant treated cotton: - Concealed button closure at centre front - Single layer chest pockets with safety fl ap and button closure - Slanted side pockets - Side vents with safety fl ap and button closure, behind side pockets - Kneepad pockets - Adjustable waistband for improved ergonomics and ultimate comfort - Single layer back pocket with safety fl ap and button closure on RHS - Single layer tool pocket on RHS leg Quality: 60% cotton / 39% polyester / 1% AST, 360 g / m². Available sizes: 48-66. Available colors: Navy. Complies with: EN 1149-5, EN ISO 14116, EN ISO 11611 class 1, and ISO 11612 A1B1C1E1F1.
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
Corresponding dispenser(s): 1054720 or 1060911.
Dust mask, class P2, for harmful dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. 5 years schelf life from date of manufacture.
High performance multinorm rain trousers with leg narrowing by press studs and elasticated waist. Quality: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Colour: Navy. Available sizes: S-3XL.
PFAS free and inherently flame retardant work jacket in Cantex Weld on the front and sleeves, and Cantex Weld/Cantex Weld Stretch on the back. Available sizes: XS-4XL. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. - Stretch elements - Industrial laundry Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Gray / black. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
Made from an inherently flame-retardant, breathable and supple fabric, harmless to the skin, this jacket offers excellent arc protection, and protection against heat and metal splashes. It is equipped with double-stitched reflective FR strips for increased visibility. The tailored jacket is anti-static and resistant to wear, shrink and pilling, even after frequent washing. Quality: 57% aramid + 42% polyester + 1% AST; ± 260 g/m². Available sizes: 44-64 EU. Available colours: Fluo orange/navy.
