BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
Corresponding dispenser(s): 1054720 or 1060911.
Welding and heat-resistant glove, Fully lined, 0,8-0,9 mm, Full grain goatskin, Full grain goatskin, Cut resistance level 4, KEVLAR® fiber, Nomex®, Cat. III, Brown, black, Extra long, Reinforced seams, Water and oil repellent, Elasticated 180°, for allround work. EN 388:2003, 3422 EN 407:2004, 41234X
PFAS free and inherently flame retardant work jacket in Cantex Weld on the front and sleeves, and Cantex Weld/Cantex Weld Stretch on the back. Available sizes: XS-4XL. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole FleXtane™ By Jallatte, and aluminium 200J toecap. Seams made out of Kevlar. Fitted with a breathable liner in 3D-mesh. Outsole in PU/VIBRAM rubber, SRC antislip, oil and carburant resistant. SOFT+ Gel insole in BASF Dynamic polyurethane, cushions pressure points, improves the distribution of weight and heel shock absorption. Anatomical, perforated. Sizes: 35-48.
Lightweight and comfortable welding shield, maximum protection when welding overhead, 50x108mm glass holder, weight 382gr, one of the lightest shields on the market. Supplied with welding glass 10DIN.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. To be combined with half and full-face masks with standard threads or Proflow SC motor unit. Weight: 450 g.
Hood in 100% polyester with Gore®Pyrad® textile technology (ePFTE membrane). Laminated, to be combined with parka Ebro. Available sizes: S-3XL. Available colours: hi-viz yellow, hi-viz orange, hi-viz red.
Fall-stop device 2 metre kevlar band with integrated shock absorber with scaffolding hook on side with fall indicator. Plastic casing. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Also suitable for fall factor 2.
Multinorm fluorescent bib pants with arc flash protection: Flame-retardant treated waterproof cloth; Premium flame retardant reflective striping; Taped seams provide extra protection; FR cotton lining for extra warmth and comfort; Flame retardant buttons and zipper; Adjustable straps with a durable buckle closure; 4 storage pockets. Quality: Modaflame Rain. Available sizes: S-2XL. Available colors: Hi-Vis yellow / Navy and Hi-Vis orange / navy. Conforms to: EN ISO 11612 A1, A2, B1, C1, E3, F1, EN ISO 11611 class 2 A1 + A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 class 2 APC 2, EN ISO 20471 class 3, EN 13034 Type 6 and EN 343 class 3: 1.
Hood with ARC protection (APC 2). This rain hood offers protection against heat, flames, liquid chemicals and offers also protection in welding situations. Available sizes: S-3XL. Available colours: Navy.
The 3M™ Speedglas™ G5-03 Pro Welding Helmet is specially designed for the versatile welder. This helmet allows you to switch between welding and grinding work thanks to our new Tap functionality. With extensive adjustment options, including more control over how you view your weld pool and how you configure the helmet for extra protection against radiation, sparks and splashes, the G5-03 puts you in control of your protection. With 3M™ Speedglas™ Natural Color Technology, Variable Color Technology (with G5-01/03VC) and a tack welding mode (with G5-01/03TW).
Overall Industry flame-retardant treated cotton: - Concealed button closure at centre front - Single layer chest pockets with safety fl ap and button closure - Slanted side pockets - Side vents with safety fl ap and button closure, behind side pockets - Kneepad pockets - Adjustable waistband for improved ergonomics and ultimate comfort - Single layer back pocket with safety fl ap and button closure on RHS - Single layer tool pocket on RHS leg Quality: 60% cotton / 39% polyester / 1% AST, 360 g / m². Available sizes: 48-66. Available colors: Navy. Complies with: EN 1149-5, EN ISO 14116, EN ISO 11611 class 1, and ISO 11612 A1B1C1E1F1.
Flame-retardant and anti-static work jacket 6035 81 with a thin lining. Concealed zip with press studs on the front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Completely metal-free. Quality: Tera TX NON-METAL, 260 g/m². Available sizes: XS-4XL. Available color: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E1 F1, EN 1149-5, EN ISO 11611 klasse 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 8,1 cal/cm², EBT: 8,7 cal/cm².
The first automatic welding mask with a curved auto-darkening filter - especially for TIG welding! Previously, automatic darkening filters were always flat. If you wanted a larger field of vision, you needed a larger helmet with plenty of room for it. Because the curved cassette is around the face, it is possible to fit a large field of view (150mm x 76mm) in a very slim mask. Light level 2.5, dark levels 8-12. Equipped with natural color technology for high-contrast vision. Four arc sensors ensure that the G5-02 shifts reliably even at very low TIG settings. G5-02 can be securely connected to the smartphone via Bluetooth via the 3M Connected Equipment app.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. - Stretch elements - Industrial laundry Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Gray / black. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
Welding cap with elastic back. Quality: Cantex 1210, 350 g/m².
Automatic welding cassette with three automatically darkening welding filters.Suitable for helmets G5-01 and G5-03. Dimensions of welding filter: 73x109mm. Battery life: 2000 hours.
Jacket in 31% polyester/28% modacrylic/20% aramid/20% viscose FR/1% AST (320g/m²). Zip closure under flap with press-studs, high collar, 2 patched front pockets with flap, 2 patched chest pockets with flap, 2 loops for gas detection equipment, adjustable cuffs by press-studs, elongated back, flame retardant reflective striping. Available sizes: 44-64. Available colours: hi-vis orange/navy.
Coverall Force+ with concealed press stud fastening, 2 inset side pockets, 2 thigh pockets with flap, 1 breast pocket with flap, 1 back pocket with flap, knee pockets, elastic in back, sleeves with adjustment press studs, reflective tape on shoulders, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS Available sizes: 44-66 Havep. Available colors: Blue / gray. Conform: EN 1149-5, EN 11611 class 1 A1 (front class 2), EN 11612 A1 B1 C1, EN IEC 61482-2 class 1.
Multinorm parka with arc protection: Straight collar; YKK zip closure under flap; 1 patched chest pocket; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket; Round sleeves; Flame retardant reflective tape. Quality: 85% FR viscose + 15% para-aramid; ± 125 g/m². Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole FleXtane™ By Jallatte, and aluminium 200J toecap. Seams made out of Kevlar. Fitted with a breathable liner in 3D-mesh. Outsole in PU/E-TPU/VIBRAM rubber, SRC antislip, oil and carburant resistant. SOFT insole in BASF Dynamic polyurethane, cushions pressure points, improves the distribution of weight and heel shock absorption. Anatomical, perforated. Sizes: 35-48.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar. Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Model on base. Can be ordered with 3-way output 1002713 and 1014794 couplers. For use with compressed air hoses with maximum lenght of 10m.
Foot loop that can be deployed after a fall to remove pressure from the groin and avoid suspension trauma after falling. Flam retardant version. No PPE.
Short jacket with concealed zip and concealed press studs, 2 front pockets with flaps, 2 inset chest pockets, back pleats for extra freedom of movement, escape mask loop, extra insert at armpits to promote freedom of movement, cuffs with velcro, extended back and reflective tape. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin weave + DWR, 280 gr / m2. Available sizes: 44-66 Havep. Available colors: Black / gray, gray / blue, cornflower blue / navy and gray / red. Conforms to: EN 1149-5, EN 13034, type 6, EN ISO 11611 class 1, EN ISO 11612 A1B1C1E2F1 and IEC 61482-2 (front class 2, rear class 1).
With a silicone rubber coating on both sides. Resistant to a very high mechanical load, thermal and electrical influences. Resistant to most acids and alkalis, dirt and oil repellent, good electrical insulating properties. Contains no asbestos. Short-term temperature resistance up to 600°C.
Flame Retardant Coverall bizflame FR51: Protects against radiant, convection and contact heat; Class 2 welding protection; Back pleat for more freedom of movement; Adjustable hem for all leg lengths; adjustable cuffs; UPF 40+ fabric blocks 98% of UV radiation radio loops; 10 storage bags; knee pockets; Concealed zipper. Quality: Bizflame Plus: 99% cotton, 1% carbon fiber 350g/m². Available colors: Navy and Orange. Available sizes: XS-2XL. Complies with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 2 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-1 Elim 8.6 cal/cm² and IEC 61482- 2 IEC 61482-1-2 APC 1 (12 ATPV 13.6 cal cm²).
Spats manufactured in brown and grey leather with hook and loop closure a red fabric strap at the bottom. Length: 15 cm.
Peltor Earmuffs to be used with the Speedglas 9100. These ear muffs provide moderate level of attenuation that meets the needs of most welding industry applications. Liquid sealing rings for improved comfort. Easy to replace cushions and inserts helps keep them hygienically clean. Large space inside cup helps reduce moisture and heat build-up. SNR: 24dB.
Designed to give maximum protection and comfort to the wearer, the Bizweld™ sleeves will provide protection in hazardous conditions. The elasticated cuffs ensure a flexible but comfortable fit. Must be worn with a suitable coverall or jacket/trouser combination. Quality: 100% Cotton, FR Finish. Available sizes: Universal. Available colours: Navy.
Outer protective visor for the 3M ™ Speedglas ™ Automatic Welding Mask G5-02 to protect the Auto Blackout Filter from sparks, splashes and scratches.
Multirisk bib and brace with concealed zip, 2 inset side pockets, chest pocket with flap, 2 back pockets with flap, ruler pocket with flap, thigh pocket with flap, knee pockets, adjustable shoulder straps with elastic, reflective band. The front meets arc class 2. Quality: 80% / 19% / 1% Cat / Poly / AS. Available sizes: 44-66 Havep. Available colors: Black / gray, gray / blue, blue / navy and red / blue. Conform: EN 1149-5, EN ISO 11611 A1A2 cl 1, EN ISO 11612 A1A2B1C1E2F1, EN 13034 and IEC 61482-2.
Multirisk jack with concealed press stud fastening, 2 inset side pockets with concealed zipper, inner pocket, 1 breast pocket with flap, sleeves with adjustable press studs, reflective tape on shoulders, extended back, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS. Available colors: blue / gray, black / gray and gray / yellow. Available sizes: XS-2XL. Conforms to: EN 1149, EN 13034, IEC 61482, EN ISO 11611 and EN ISO 11612.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. The unit consists of a regulator, pre-collector and main filter (SR 292), all of which are mounted in an enclosing steel sheet stand. The unit can be placed on the floor or mounted on a wall. The pre-separator has automatic drainage, separates coarser particles, water and oil. The SR 292 main filter consists of a carbon filter part (500g) , surrounded by two P3 particulate filters. The air is cleaned to remove any remaining particles/gases/vapours/odours. A Y coupling that increases the number of outlets is available as accessory. A maximum of 3 people can be connected.
Output for 3 persons / compressed air hoses to be installed on Aircare filter system.
The M-985 Earmuff Assembly allows 3M™ Versaflo™ M-100 Series and M-300 Series users to use headgear-mounted earmuffs. SNR: 28dB In accordance with: EN 352
Harness with two attachment points: on the back and on the chest. Chest and back attachment point using D-ring. Leg and shoulder straps adjustable. Ideal for welding as raw material is Kevlar fabric blended with highly durable, heat resistant and flame retardant modacrylic fibres. Available in S, M/L or XL.
Double safety line of 1,5m with large hooks (50mm) for welders. Protection of damper against heat and combustion, up to 371°C. Straps reinforced with Nomex/Kevlar which provides protection against combustion.
A high-cut, triple-lined winter safety boot with highest protection for very cold environments. Specially treated leather with heat resistance para-aramid thread in the seams provides a max operating heat limit of 400°C/752°F for 30 minutes and resists weld spatter. "W" in the name indicates that the boot is certified for welding. The oil and heat-resistant nitrile outer sole gives excellent grip and JALAS® aluminium toe cap, plasma-treated textile puncture protection and double impact protection zones in PORON® XRD® mean safety with every step. EN ISO 20349-2:2017 S3, SRC, CI, HRO, HI, WG EN ISO 20345:2011 S3, SRC, CI, HRO, HI, WG
Single gas gas detector easy to operate with 1 button. Equipped with NFC, making the device easy to connect to the free Watchgas app, and therefore easy to manage. Equipped with reliable and stable sensors, developed according to the latest technology. Display shows real-time values. Alarm values can be set by connecting to the app, or by using the docking station. Battery and sensors can be replaced.
Compress to use for first, second or third degree burns. Safe, efficient and effective cooling method for burns. The compresses are made of a synthetic foam, that can fix the maximum amount of gel and therefore seamlessly connect to all contours of the body. Sterile milk white to clear hydrogel, largely consisting of water (96%) with preservatives. Tea Tree Oil disinfects, stimulates, is antibacterial and prevents the formation of scar tissue. Cools, relieves pain and minimises the development of the burn. Dimensions: 20 x 45cm.
Compact bandage cabinet for construction. Includes : 2 x quick bandages 7x10cm, 1 x quick bandage 12x14cm, 1 x triangular bandage, 10 dabbers, 10 sterile pads, 1 crepe bandage 7cm, 1 elastic bandage 6cm, 1 elastic bandage 8cm, 1 adhesive plaster 1.25cm, 1 wound plaster 6cmx1m, 1 assorted plasters, 1 disinfection spray, 1 tweezers Feilchenfeld, 1 Lister scissors, 1 resuscitation screen , 1 rescue blanket , 1 First Aid note, 12 safety pins, 2 pairs of gloves, 1 PLUM eyewash 200ml, 1 Burnshield 10x10cm, 1 hanging bracket
Double safety line of 2m with large hooks (50mm) for welders. Protection of damper against heat and combustion, up to 371°C. Straps reinforced with Nomex/Kevlar which provides protection against combustion.
Women's multinorm trousers LESHA with arc protection: Concealed button placket / Zipper fly; 2 inset pockets; 1 patched thigh pocket; 1 stick meter pocket with flap; 1 patch back pocket with flap; elastic waist; knee pockets; Waist with belt loops; Flame retardant reflective stripes (70mm). Quality: Sio-Safe™ Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 gsm. Available sizes: 36-56 ladies. Available colours: Fluo yellow/navy. Complies with: IEC 61482-2 : 2009 class 1- ATPV 15.2 cal/cm², EN ISO 11612 : 2015 / A1A2B1C1E3F1, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034 : 2005 + A1 : 2009 Type PB [6] and EN ISO 20471 : 2013 +A1 2016 / Class 2.
Flame retardant Hi-Vis softshell jacket, very comfortable. Non-metal, wind and water-repellent and with a high arc standard. Ergonomically shaped to work with arms raised. With comfortable heat seal reflection. Concealed zipper front and double storm flap with press buttons. Left breast pocket with flap. Right chest pocket with zipper and loop for telephone cord. Headset holder in the collar. Side pockets with zipper. Left sleeve pocket with flap, concealed key ring and loop for ID pocket. Cuffs on the inside of the sleeves. Tunnel cord bottom of jacket. Quality: Windtech FR 340, 340 g / m², wind and water repellent. Available sizes: XS-4XL. Available colors: Fluo yellow / navy. Compliant with: EN ISO 11612: A1 B1 C1 F1, IEC 61482-2: APC 2, EN 1149-5, EN ISO 11611: CL.2 A1, EN 13034: TYPE PB [6], EN ISO 20471: CL.2 * (XS-S) CL.3 (M-4XL).
Multirisk bib and brace trousers from the Havep Force+ range with concealed zip, 2 inset side pockets, 1 back pocket with flap, 2 thigh pockets with flap, knee pockets, adjustable shoulder straps with elastic. Quality: 79% / 20% / 1% Cotton / Poly / AS. Available sizes: 44-66 Havep. Available colors: Gray / yellow, blue / gray and black / gray. Conform: EN 1149-5, EN 13034, EN ISO 11611, En ISO 11612 and IEC 61482.
Multinorm parka Beltrum with arc protection: Straight collar; YKK zip closure under flap; 1 inset chest pocket with flap; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket; Round sleeves; Sleeve narrowing; Elastic drawstring in front hem; Elongated back tail. Quality: 3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available sizes: S-53XL. Avialable colors: Fluo orange.
Made from high-quality environmentally friendly silicates and provided with a mineral-based coating to minimize fraying and strengthen the fabric. Suitable for horizontal use at high temperatures. Short-term temperature resistance up to 1300°C.
Protection sleeve breathing hose Adflo. No PPE.
Flame retardant inflatable life jacket for welders: • Durable aluminized Panotex silver wipe clean cover; • FR Touch and close fastening cover; • Interlock FR AST buckles; • Adjustable waist belt; • Detachable crutch strap; • Integrated deck safety harness approved to EN ISO12401; • All straps and belt in FR AST webbing. Color: Silver. Buoyancy: 294N.
Screen carrier made of heat resistant plastic, type S57. Suitable for attachment of face shields s59/s603/s605/s613/s615/s760. This screen carrier can be attached directly to the 30 mm slot on the helmet using adapter BILSOM 3712 (not included). With the addition of a BILSOM hearing protector, a combination head-hearing-face protector can be created.
Multinorm softshell Hollum with arc protection: Straight collar Zip closure under flap; 1 patched chest pocket with zip closure; 2 inset pockets; 1 loop for gas detector; Round sleeves; Sleeve narrowing by touch and close fastening; Elastic drawstring in hem. Quality: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-5XL. Available colors: Fluo orange. Compliant with: IEC 61482-2 : 2018 APC1 - ATPV 24,3 cal/cm², EN ISO 11612 : 2015 / A1 B1 C2 F1, EN ISO 14116 : 2015 / IND.3, EN ISO 11611 : 2015 / Class 2 - A1, EN 1149-5 : 2018, EN 13034 : 2005 + A1 : 2009 Type PB [6], EN ISO 20471 : 2013 +A1 2016 / Class 3 and EN 14058 : 2017 / Class 1 3.
Women's jacket from the HAVEP® 5 safety image+ collection. This jacket meets 6 standards and is made of cotton/polyester/carbon. Quality: 80%/19%/1% cotton/polyester/carbon, 4/1 satin weave + DWR, 280 gr/m2. Available sizes: S-3XL. Available colours: grey/red. Conforms to: EN ISO 11612 A1A2B1C1E2F1, EN 1149-5, IEC 61482-2 APC 1, EN 13034 Type 6, EN 17353 Type B3.
Head protection in Tecaweld for Speedglas 9100. Not separately certified as PPE.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Suitable for wall mounting. Can be ordered with 3 way 1002713 and 1014794 output clutches. For use with compressed air hoses with maximum length of 10m.
The flame retardant and anti-static Belarto is a 3-layer softshell that is perfectly windproof, yet breathable. The softshell, with a standing collar, protects you against the cold. If you get too hot, you can take off the sleeves. The Belarto has on the outside one inset chest pocket and two inset pockets on the side, all with zippers. Inside there is a pocket for storage. The softshell has been fitted with sleeve narrowing with touch and close fastening and narrow reflective FR strips on the arms and chest: Straight collar Zip closure under flap with touch <(>&<)> close fastening 1 inset chest pocket with zip closure 2 inset pockets with zip closure Detachable sleeves Sleeve narrowing by touch and close fastening Flame retardant reflective tape (25mm) Back length 75 cm (L). Quality: 3-layer softshell: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-3XL. Available colours: Navy.
Complete work lamp for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01, including light, protective glass, cable / mounting parts and a long cable. No PPE.
Replacement front cover for the flip-up part of the 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01.
Harness with two attachment points: on the back and on the chest and quick release buckles. Chest and back attachment point using D-ring. Leg and shoulder straps adjustable. Ideal for welding as raw material is Kevlar fabric blended with highly durable, heat resistant and flame retardant modacrylic fibres. Available in S, M/L or XL.
Top quality welding glove made of black analyne leather on palm and back and lined cuff of 15cm in super split leather for even better heat resistance. This glove is super comfortable and has a good dexterity. The palm is extra reinforced, which increases the durability of the glove. With kevlar seams.Glove can be used for MIG/MAG and electrode welding. Available color: black/gold Available sizes: 10, 11
Spats manufactured in brown and grey leather with hook and loop closure a red fabric strap at the bottom. Length: 36 cm.
Protection of neck and ears in Tecaweld for Speedglas 9100. Not separately certified as PPE.
Automatic welding helmet from the 9100 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks with headband. Adjustable air stream. Cassette not included.
Complete kit with Speedglas heavy duty welding helmet G5-03 Pro Air grinding hood under welding hood, with welding filter G5-01/03 TW, Adflo particle filter and Adflo motor unit, and carrying bag. (without safety helmet adapter)
Helmet hood in 100% polyester with Gore®Pyrad® textile technology (ePFTE membrane). Laminated, to be combined with parka Ebro. Available sizes: S-3XL. Available colours: hi-viz yellow, hi-viz orange, hi-viz red.
Heavy duty welding helmet G5-01 without welding filter and neck or head protection, with replacement shell. Designed for heavy welding and grinding and can be connected to the Adflo powered protection for a TH3 class respiratory protection (NPF500). Cassette (available separately). Conforms to: EN379/ EN175.
Welding trousers Bizflame FR06: 100% Metal Free; Protects against radiant, convection and contact heat; Certified against molten metal splash; Industrial wash at 75°C and machine dry 155°C; antistatic; Flame Retardant Industrial Washable Striping; knee pockets; 8 storage pockets. Quality: Bizflame Ultra: 80% Cotton, 19% Polyester, 1% Carbon Fiber 340g. Available sizes: 30-46 PW. Available colours: Royal blue and grey. Complies with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 1 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 Class 1 and EN 13034 Type PB [6 ].
Magnifying welding glass for Speedglas G5-02 series.
