BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Fleece sweater in 100% polyester microfleece (320g/m²). Straight collar with 1/4 zip closure, 2 inset pockets, pulling cords in the waist, anti- pilling. Available sizes: XS-7XL. Available colours: black, navy, grey.
Sportive safety spectacle with clear polycarbonate lenses provided with the Supravision Excellence coating: antifog and antiscratch. 100% metal free. The end of the temple has a notch so that an eyewear cord can be attached to the spectacle. Frame: blue/anthracite. industrial applications. PCF (Product Carbon Footprint) = 0,21kg CO².
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
Comfortable fire retardant bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. Protective liner is removable. Size: 53-63cm.
High shoe in waterresistant premium full grain leather, with a non metallic antiperforation sole and 200J toecap. Fitted with a breathable, abrasion resistant liner in Coolmax. 100% metalfree. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, ergonomic insole. Sizes: 35-48.
Boot in PVC, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 37-47.
Polo piqué with stretch. The men's model has a three-button closure and the ladies model has 4 buttons. Neck tape, side vents and ribbed cuffs. Quality: 95% cotton, 5% elastane, 200 g / m². Available sizes: S-5XL. Available colors: White, gray melange, red, navy, blue, green, black and dark gray.
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 406 mm.
Multinorm RWS trousers with hidden zipper, 2 inset side pockets, back pocket with flap, ruler pocket with flap, thigh pocket with flap, pre-shaped easily accessible knee pockets with opening at the top lockable with flap and Velcro and length seam. Quality: 50% / 49% / 1% polyester / cotton / carbon + DWR, 295 gr / m2. Available colors: Fluo orange. Available sizes: Size range 44-66. Complies with: EN 1149, EN 13034, EN ISO 11611 class 1, EN ISO 20471 class 1, EN ISO 11612, IEC 61482 class 1.
Women's Shift trousers with concealed zip, thigh pocket with concealed press stud fastening, 2 inset side pockets, ruler pocket with tape measure pocket, 1 back pocket with concealed press stud fastening, D-ring, reflective piping, adjustable elastic at the waist. Quality: 65% / 35% cotton / polyester, 290 g / m2. Available sizes: 34-54. Available colors: Navy, black and gray.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Fluo yellow/Grey and fluo yellow/navy. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
Hi-vis t-shirt Belenos 12702: - v-neck; - short sleeves with rib; - segmented reflection on the front, back, shoulders and sleeves. Quality: Cotton / PES 60% / 40%, 180g / m². available sizes: XS-3XL. Available colors: Fluo yellow / gray. Conforms to: EN ISO 20471 class 2.
High shoe in waterresistant, breathable Putek®, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a br eathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
Low shoe in waterresistant brown full grain leather, with a metallic antiperforation sole and synthetic 200J toecap. Fitted with a b reathable, abrasion resistant liner in textile 3D. Outsole in PU double density, SRC antislip, oil and carburant resistant. Removable, Polyjal polyurethane insole with textile layer. Sizes: 38-47.
The Vaski is a hi-vis ladies rain jacket which also offers a high degree of protection to the wearer. The jacket is made out of a light, but high quality fabric and complies to many international standards such as IEC 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5 and EN 13034. This premium jacket is equipped with a YKK zipper with handy grip for easy opening and closing. The sleeve ends are preshaped and the back is extended for your comfort. Available sizes: XS-2XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
P3 filters with high-resistance shell, with bayonet connection for mask Medopair II. Offer excellent protection aginst solid and liquid particles such as dust, fumes, aerosols. In linet with: EN143
Black clog made out of microfiber. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 35-42.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
High shoe made of microvelours, fitted with a 200J toecap. With liner in Climazone in antiperspirant textile and comfortable insole providing extra protection against mildew and heat. Sole made of PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
Head protection, large, for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01
High shoe in microfibre/textile with a non metallic antiperforation sole and steel 200J toecap. BOA closing system. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU Wellmaxx, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
SR500 motorunit to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Not for confined spaces. Flow rate: min. 175 or 240 L/min. Included: battery, battery charger, belt, 2x P filters, 2x filter adapters, 2x pre-filter holders, 10 prefilters, flow meter, user instructions, cleaning wipe, plug kit.Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
Standard fall harness with straight leg straps and 2 attachment points (back and chest). Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with buckle through buckle closure. Tires made of water and dirt-resistant polyester. Fall indicator front and back.
Automatic welding helmet suitable for most welding applications up to shade 12. This helmet has permanent protection against harmful IR and UV radiation regardless whether the filter is dark or light. This helmet has 3 dark shade number levels and 3 user selectable levels of detector sensitivity.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Disposable protective cover against contamination by splashes and spray mist, for Versaflo TR-600 and TR-800.
The X-fit has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate recyclable bag.
Safety glasses with orange/black frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. With foam and elastic headband. Polycarbonate lenses with an anti-scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and inhibits vapour formation by more than 2 minutes.
Self-rescuer, compact, lightweight and ergonomic. Can be worn on the body or mounted on the wall in a waterproof box. Is used to escape from a lack of oxygen, but also against toxic gases and particles and provides the user with oxygen for 15 up to 32 minutes (depending on the effort and stress of the user). Operation based on a small compressed air bottle which adds 02 to expired air. Delivery in orange storage box. Version without hood. Belt sold seperately as an accessory. 15-year life cycle.
Complete kit with SR 500 fan unit and protective helmet SR 570, 1 protective film, standard battery, battery charger SR513, belt SR508, 2 pieces of SR510 P3 particle filters, 2 filter adapters, 10 prefilters SR221, 2 prefilter holder, flow meter, plug kit, cleaning tissue and user instructions. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Glove with double nitrile coating on a very flexible, thin 18 gauge seamless nylon/spandex liner. The fully coated glove prevents penetration of oils (due to the red smooth nitrile coating) and this without loss of grip (due to the black nitrile foam coating). Highest protection against abrasion in combination with short-term protection against contact heat (100°C). In accordance with: EN388:2016: 4.1.2.1.A, EN407:2021: X.1.X.X.X.X.
Chemical protection glove, fully lined, 0,3* mm (*chem-layer) nitrile, fully dipped, sandy finish, 18 gg, nylon, oil and grease resistant, water and oil repellent, for allround work. Suitable for contact with foodstuffs, except for fatty foods. CAT III . In line with : EN 388:2016 4121X, EN 407:2004 X1XXXX, EN ISO 374-1:2016/Type A AJKMNOPT, EN ISO 374-5:2016/Virus .
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Complete D breast anchor point. Leg straps easily adjustable. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Extra lining on shoulder and leg for greater comfort; also easy to put on. Chest and leg straps have quick-release buckles. Standard version with trauma loops on leg straps for deployment after a fall. Harness is very easy to put on. Large stand-up D-ring on the back of the harness.
Connect clip for combining Roofer with wire mesh visor and hearing protector.
Chin strap 2-point for helmet G22C/D and G3000.
P2 dust filter from 3M for direct connection to 3M half and full face masks. Protects against harmful dust, mist and smoke particles .
Safety helmet with micro peak and integrated arc visor, made of strong ABS for improved low temperature (-40°) and side impact protection. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
Yellow, soft and comfortable 30 cm gloves in unlined flocked natural latex. Thickness 0.45 mm. Good chemical resistance. Suitable for food processing, agriculture, automotive assembly, chemical industry, pharmaceutical industry.
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Offers protection against contact heat of 100°C during 37 seconds, and 250°C during 12 seconds. Sizes: 8,9,10.
Empty first aid kit box made of impact resistant ABS plastic. Domino(270 x 190 x 115 mm) for maximum 10 people. Suitable for all commercial buildings. Including wall mount.
Absorption roll double-perforated every 23 cm in length, 38 cm x 22 m, 100% polypropylene. Heavy quality grey padded, with high absorption capacity and low lint. Suitable for replacement roll for mobile response cart. Suitable for almost every industrial application. Very economical in use. Absorption capacity of 45 litres. Weight 3.5 kg.
Face shield in clear polycarbonate for use with face shield holder S89 or helmet face shield holder S54 CE.
Face shield in clear polycarbonate for use with face shield holder S89SR or helmet face shield holder S54 CE.
Refill for first aid panel: wound cleaning wipes (3227).
Anti-static absorbent pads measuring 41 cm x 51 cm. These light-weight perforated pads are packaged in a box. Packaged per 200 piece s. The wipes are made from 1-ply melt-spun polypropylene. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacity: 166 litres.
Absorbent pillows measuring 43 cm x 48 cm. These heavy-weight cushions are packaged in a box. Packaged per 16 pieces. Ideal for the absorption of chemicals, acids and bases or universal absorption. The green colour identifies these pillows as chemical waste. Absor bent pillows for regular leaks in the same place. Absorption capacity: 105 litres.
Gaiters, aluminized para-amide, 500gr./m², Velcro closure, no lining,strap under sole, long-term use. Dimensions: length 36cm.
Mandatory sign - Safety gloves mandatory in self-adhesive polyester. Dimensions diameter: 100mm. Not PPE.
Adsorbs a wide range of chemicals, including acids and caustics Chemically inert - product does not degrade or react with adsorbed liquid. Green colour alerts workers that product is used with hazardous liquids. Green colour also allows easy identification for separate waste disposal. Perfect to clean up chemical spills or for use in laboratories Adsorption capacity: 76 litres
Enclosures for electrical plugs Extremely effective against unauthorised or negligent use of electrical equipment. Not PPE.
High shoe in nubuck leather and Techno leather (long-lasting), with a steel anti-perforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant Vent-Air liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Earplug in TPE with soft strips for an easy fit in the ear canal. Equipped with a cord and handles to easily remove earplugs.
Sign according GHS normation in self adhesive polyester: corrosive. Size: 100x100mm. 4 labels per card. No PPE.
Protective cover disposable for air tube in PU convenient for air caps.
Martor spare knife type 37BR, packed per 10 pieces. PPE Category not applicable.
High-shoe S3, semi-orthopaedic, in full grain leather with toecap in aluminium sole with L-Protection. Equipped with 100% Nappa cowhide leather lining. Sole in Nitrile and HRO. Antibacterial insole. Sizes: 39-47.
Plastic spill tray without grid. Capacity: 63 litres. Weight: 5.5kg. Dimensions: 1000X605X200MM.
Waterproof PVC bag with small karabiner to attach to belt. Ideal for storing and transporting electro gloves. Dimensions: 450x180x70 (mm)
Replacement inox knifes for safety knife Profi 40. Dimesions: length: 71,20mm, width: 18mm, material thickness: 0,50mm. Package: per 10 pieces. No PPE.
Inox scissors for cutting fabric or paper. Does not cut in skin.
The Xact-fit, with cord, adapt perfectly to the shape of the ear. The ergonomic shape guarantees optimum wearer comfort. Available in a disposable box containing 50 pairs, each pair in a carton minibox.
Overboot against electricity. Sole is produced with a vulcanised rubber and tested against 35000V. Each boot is tested separately against 25000V before getting sold. 100% waterproof and adjustable in height. Easy to pull out, because of V-shackle. In accordance with: EN50321 / EN ISO 20347 OB HRO SRA.
Bib and brace trousers, 60% Cotton, 40% Polyester 245g, Knee pad pockets, Elastic back feature for extra comfort, Smart phone pocket. The Texo cotton rich fabric creates a very comfortable yet practical garment. This bib <(>&<)> brace offers complete lower body and leg protection. Features include a concealed bib pocket, kneepad pockets and thigh pockets. Velcro at the leg end ensures a secure fit. Compatible with the Texo Contrast Jacket.
