BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Cut resistant lined welding glove made of durable soft goat leather with Kevlar seams.
Fireproof battery bag to safely transport, store and charge small batterie of electric devices. If the battery should ignite, the damage will be limited to the bag and the battery. Tested with Li-Ion batteries up to 400W). Big enough for almost any bicycle battery. Dimensions: 215x160x145cm.
Welding glove made of high-quality split cowhide leather with cotton lining and heat-resistant Kevlar seams.
Protective shield for head and throat made of Tecaweld, a mix of 75% cotton and 25% Kevlar fibres. Tecaweld is more resistant to fla mes and molten metal and is also very flexible and durable.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colour: blue.
Fireproof Blanket fiberglass. Size 180 x 180 cm. For fixing the wall, red support. With Dutch/French printed label. Suitable for kitchen fires.
UV-resistant polyethylene chain to block off danger zones. Can be used in combination with marker poles. Weight: 2.7 kg per 25 m. Le ngth: 25 m. Colour: red/white.
This 0.63mm thick knife is very suitable for cutting different materials. The ergonomic support in aluminium makes the knife very stable and is suitable for left and right handed ones. Very handy slider for using the knife while wearing safety gloves! Spare blades: 1024827
Reusable multi-gas detector with shockproof housing Simultaneously detects H2S, CO, O2, and %LEL. Standard with built-in pump, data logging, and event logging. Semi-annual calibration required. Battery life: Approximately 13 hours. Includes rechargeable battery and wall charger. Includes a 1m calibration hose with quick coupling, 3m sampling hose with particulate filter and quick coupling, and a set of spare pump filters (5 particulate filters and 5 hydrophobic filters). Concentration is always visible on the LCD display. STEL/TWA exposure records. With a filtered LEL sensor, calibrated to methane as standard. Alarm values: %LEL 10%-20%, H2S 10-15ppm, O2 19.5%-23.5%, CO 20-100ppm. Compliant with: 89/336/CEE and Ex ia IIC T4. IP class 65/67 and ATEX approved.
XL VABON sweatband for safety helmet Vulcan from Centurion.
Glove with flexible nylon carrier and nitrile foam coating with anti slip design. Glove is very pleasant to wear and thus provides increased comfort. Excellent grip in oily conditions thanks to the foam nitrile coating with anti-slip design. Available in sizes 6, 7, 8 and 9. In line with EN388 3.1.2.1.
Boot S3 in black, heat resistant full grain leather. Toe cap in steel and synthetic anti-perforation sole. Lining in leather with heatresistant garments. Outer sole in Nitril STEINAU. Removable insole in Basic Grey. Sizes: 39 - 50.
Dark blue high shoe S3 in full grain leather with steel toecap and steel antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D: 39-48.
Offers protection against electric arcs (class 2). Very lichtweight, flame retardant and antistatic rain jacket in 100% polyester with a highly breathable ePTFE membrane (Gore Pyrad™ technology)(215g/m²). Flameretardant lining in 50% aramid/50% viscose (115g/m²). Zip closure under flap with velcro, 2 front pockets with flap, chest pocket with flap, adjustable cuffs through velcro straps, elongated back, 2 loops for badge, vertical and horizontal reflective striping. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Coverall, 50% polyamide, 50% polyurethane, 170 gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zipper under double storm flap with press stud fastening, elastic in the waist, windstopper in the sleeves, adjustable press stud fastening at the bottom of the leg. Complies with: EN 343.
Laces, black in polyester. Length: 75cm. No PPE.
Stylish and functional Vision Rain jacket makes from a renewed 300D Oxford PU coated durable dirt-repellent fabric. This jacket features many features including a new aluminized Insulatex lining panel, reflecting body heat back to the body for maximum warmth and comfort. Features: Waterproof and taped seams. Lightweight flexible interrupted HiVisTex Pro reflective striping. Texpel dirt-repellent finish. Lined for extra thermal insulation. 4 storage bags and 1 phone pocket. Ergonomically shaped hood. Velcro adjustable cuffs for good fit. Available colors: Hi-Vis yellow/black and Hi-Vis orange/black. Available sizes: XS-3XL.
Flame retardant and antistatic signaling polo, feels very soft, comfortable, good moisture-regulating properties, anti-bacterial, light, inherently flame retardant <(>&<)> antistatic, perforated reflective bands for increased wearing comfort, press-stud fastening, Long Sleeves. Quality: 60% Protex + 39% Viloft + 1% AST; ± 180 g / m². Available sizes: S-5XL. Complies with: EN ISO 11612 A.B1.C1.F1, EN ISO 14116 index 3, EN 1149-5, EN ISO 20471 3 and EN 13758-2.
Lightweight air hood with inegrated bumpcap and fire retardant face seal, for work where there are sparkels or hot particles. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50 and compressed air, with Jupiter, NPF: 500 with TR-300, TR-600 and TR-800.
Work trousers Millenia multirisk 12573 including: - 2 front pockets; - 2 back pockets; - 1 thigh pocket; - 1 meter bag; - knee pockets with cobra finnish. Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-64 BE. Available colors: Fluo yellow / gray and fluo yellow/navy. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN ISO 14116, EN 1149-5, EN 13034 type6 and IEC 61482-2 class 1.
3M ™ Solus ™ 2000 with clear PC lens and adjustable ear branches. The glasses are available with a Scotchguard coating. Marking: 2C-1.2 1 FT KN.
Flame retardant jacket Laruns with arc protection: Straight collar; Zip closure under flap; 2 patched chest pockets with flap; 2 inset pockets with flap; 2 loops for gas detectors; Round sleeves; Sleeve narrowing; Extended back; Welded, segmented reflective tape. Quality: 24% PES + 75% cotton + 1 AST; ± 250 g/m². Available sizes: 44-64. Available colors: Navy/fluo yellow. Conform: IEC 61482-2 : 2009 class 1 - ATPV 8.4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E1 F1, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008 and EN 13034 : 2005 + A1 : 2009 Type PB [6].
This multinorm work jacket has a regular fit. The twill weave makes this jacket very strong. The multinorm jacket has an ergonomic fit and pleasant wearing comfort. Quality: 25% polyester and 1% carbon. Available colors: Navy. Available sizes: XS-5XL. Conforms to: EN 1149-5: 2018, EN 11611: 2015, EN 13034: 2005, EN ISO 11612: 2015, IEC 61482-2: 2009.
Plastic dispenser for attachment to wall, consisting of a plastic pump (Art: 1053793), 0.5 litres of cleaning fluid (Art: 1053666) and cleaning wipes (Art: 1021979).
High shoe S3 in waterresistant black microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in SympaTex. Sole in PU/Vibram with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 35-52.
Low shoe in waterrepellent black full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF, SRC antislip, oil and carburant resistant. Removable, perforated insole with PU and Elastopan layer for reducing pressure points and stress, while standing and running for a long time . 100% metalfree. Sizes: 35-48.
The Nibas is our cold storage bomber jacket with quilted lining that protects you to temperatures of -40 °C. The inner collar is finished in fleece. The sleeves are handy with knitted cuffs, a practical thumb hole and touch and close sleeve narrowing. For your comfort, the elastic waist can be narrowed using press studs on the sides. The shoulders are reinforced so that this bomber jacket is a durable and practical protective garment. Inside: Fleece inside collar, Provided for hood (hood available separately), Front zip closure under flap, 1 patched chest pocket with flap, 2 inset pockets with flap, 1 sleeve pocket + pen pocket, Round sleeves, Sleeve narrowing by touch and close fastening, Shoulder reinforcement, Elasticated waist and narrowing by press studs at the sides of the waist, Elongated back tail, Back length 80 cm (L) Fabric: 100% polyamide; ± 185 g/m² + hi-vis - 100 % PES ± 220 g/m² - Hi-vis Cordura: 100% polyester ± 210 g/m² Color: fluo yellow / navy. Compliant with: EN 342 + EN ISO 13688 : 2013
Filter holder for use in combination with dust filter holder 501 for direct connection of dust filters 5911, 5925 and 5935 to 3M hal f and full face masks.
Dust mask, class P2, for harmful dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and re duce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 10.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. NPF: 4.
Dust mask, class P3, for toxic dust and ozon concentrations below the treshold limit value. Form-retaining thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfort and better sealing. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. Fitted with adjustable, elastic headbands with closure. The new IonicAir filter technology reduces breathing resistance by 30%.
Innovative design with unique, oval earplugs, guarantees fixed position on head / in ear, therefore blocking out all noise. Weight: just 8grams. Available in package containing 15 individually boxed pieces.
AX screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 260g.
P filter for motor unit Versaflo. Protects against highly toxic dust, mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. Odors only if concentration below the MAC value. NO protection against gases, only comfort.
Parka 3 in 1, polyester peach PVC coated, 230g / m², anti-pill fleece, 260gr/m², waterproof, 2 pockets with zipper, zipper with flap, removable fleece lining. Collar can be folded in hood.
Clear faceshield 5F-11 provides increased protection against high speed particles (120m/s).Compatible with the 3M™ V5 Face Shield System for mounting on a 3M™ G3000, G500 or G22 Series Safety Helmet. In accordance with: EN 166
Fall-prevention device, 2,5 metre webbing strap, with integrated shock absorber. Plastic casing. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. With 2 carabiner hooks. Only for vertical use. Weight: 1.27 kg. Max user weight: 140 kg.
Industrial mineral absorbent for safe, quick absorption of harmful liquids that have leaked or spilled. Rapid, large absorption capacity.Bag of 20kg.
Ergonomically shaped kneeprotectors in 100% polyethylene. Very lightweight. To wear with TWO2000(1029448) or TWC2000(1029671). Dimensions: height: 22 cm, width: 17 cm. Available sizes: Universal. Available colours: Black.
Yellow first aid kit (bilingual) with special colour system and colour guide for faster and more efficient location, selection and use of first aid materials. The colour guide tells you which materials to use in which situation. You will also receive instructions on how to use them. Faster, well organised and more accurate! Material Resc-Q-Box: ABS plastic case, impact-resistant and retains shape, temperature, dust and water resistant, maintenance-free with transparent cover plates, flexible hinges and robust closure. Includes: content in accordance with ARAB guidelines (Multi), Resc-Q-Assist Colour System, NL and FR colour guide, wall holder, content table in NL and FR. Version: Multi.
Dispenser for EAR earplugs (excluded) for one-time use (refill: 1001007, 1013077). Simple to operate with a simple twisting action. Made of 100% recyclable material.
Standard battery for TR-600. Weight 450 grams. Usage duration depends on filters used.
Sports goggles with grey-black frame with anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti-scratch and anti-vapour layer. Twilight coating: used in low light conditions, improves the contrast. The transmission factor is ideal outdoors, especially in the morning and the evening twilight. Supplied without glasses cord.
Belt bag for storing your Martor safety knife. Example: Secupro625, Secumax 363, ballpoint pen, safety scissors. Made in black nylon with loop, sturdy and wear resistant. Dimensions: 215x68x40mm
Comfortable bumpcap made of cotton, withmodern 'casual' baseball cap with ABS shell. Reduced peak. Hat size adjustable from 60 cm to 63 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: black.
High shoe in microfiber, with a synthetic antiperforation sole and metal 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Luxury ladies' fleece vests are designed to make you feel comfortable regardless of the cold weather and working conditions you can face. A very favorable and important feature of the material Microfleece is the high insulation value, which protects the fabric against unwanted cooling of the body. This Sweatvest Fleece Luxe for women has a contemporary fitted fit with a feminine look. This product is finished at the bottom and at the end of the sleeves with an elastic tape that ensures that the garment fits perfectly around the body. Also, at the bottom of the sleeves a thumb hole is made so you can let your sleeves fit around the palm of your hands. That gives an extra protection against wind and cold. Handy pockets on the outside as well as on the inside of the Sweatvest ensure that you can carry all your essentials with you, such as phone, cards and keys. Fabric: 100% polyester, Microfleece, 280 g / m². Available colors: Red, royal blue, navy, black and gray. Available sizes: XS-3XL.
Bermuda Shift Covered with zipper, thigh pocket, 2 inset side pockets, D-ring, ruler pocket with tape measure pocket, adjustable elastic waist and 1 back pocket with snap button closure. Quality: 65% / 35% cotton / polyester, 2/1 twill weave, 290 gr / m². Available sizes: 44-66. Available colors: navy / gray, blue / gray, red / gray, black / gray and charcoal gray.
The Arbus cold storage bib and brace trousers protect you excellently against the cold with its fixed quilted lining. To stop the slightest breeze of wind, the legs can be narrowed and the hem adjusted. For your convenience, the braces come with a buckle, the knees are reinforced and the fly has a zipper. Exterior: Front fly with zipper, 2 inset pockets, Braces with buckle, Leg narrowing below by touch and close fastening, Knee reinforcement, Zip closure under flap with touch and close fastening at leg end, Adjustable hem at leg end with press studs. Inside: Fixed quilted lining. Fabric:100% polyamide; ± 185 g/m² + HV - 100 % PES ± 220 g/m² - Hi-vis Cordura: 100% polyester ± 210 g/m². Color: Hi-vis yellow/navy.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. Fitted with adjustable, elastic headbands. Without an adjustable nosepiece (metal-free) and extra wide headbanf for more comfort and a secure fit.NPF: 50.
Cap with reinforced front, 6 panels, with ventilation holes, curved flap with contrast colored edge and adjustable metal clip closure. Quality: 100% cotton (drill, heavily combed), 350 g / m². Available sizes: Universal. Available colors: Black and navy.
Premium grain goatskin leather combined with cut and impact protection glove. TPR impact protection on top of the hand and the full lenght of the fingers. Additional palm leather layer enhances cut resistance. Reinforced seams on the index finger and base of thumb. Secure cuff closure with TPR tab closure. Sizes: 8-13.
Brushed fleece body warmer with long zip. Brushed on both sides. Two front pockets, contrasting zips and decorative stitching on the sleeves. Elastic tape on the bottom hem and cuffs. Quality: 100% polyester, 280 g / m² Available sizes: S - 5XL. Available colors: Black, Navy, Lime, Gray, Blue and Red.
White clog made out of microfiber. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 35-42.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
Practical plastic hearing protector (di-electric) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Low shoe in black waterreistant full grain leather with synthetic toecap and synthetic antiperforation mid-sole. PU scuffcap. DryShield membrane. Sole in PU/PU. Sizes: D (36-48), XD (39-48).
Baseball bumpcap in nylon, frame in EVA and shell in ABS. Fitted with ventilation wholes and velcro strap at the rear of the head.
T-shirt Multinorm 103004 with long sleeves and reflective bands. Quality: 60% Modacrylic / 39% Cotton / 1% Other, 200 g/m². Available colors: Navy. Available sizes: XS-5XL. Complies with: EN 1149-5:2008 and EN ISO 11612:2015.
Dark grey hearing protector with HiViz orange element for attachment to helmet, made of combination of plastic and stainless steel. Very light model with ergonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
Service pant in full stretch that provides maximum freedom of movement. Modern, tight fit. Sewn-in, adjustable, stretch in the waistband for comfort, also rubberized to keep the pant on place.
Earplugs with cord for ongoing use. SNR: 30dB.
Rain trousers Hydrosoft Southend. Elastic at the waist, adjustable legs with press studs, 170 grams (+/- 10gr). Available sizes: S - 3XL Available colours: Yellow, green, royal blue, orange, navy
Chemical glove for precision and medium-heavy work. Immersed in a two-layer liquid-tight Nitrile using our XLNT technology. 35 cm long safety cuff. 18gg liner for high fingertip sensitivity in difficult environments. Type A chemical protection. Food approved and Oeko-tex certified. EN388:2016 4X43C EN407: X1XXXX EN374-1:2016: AJKLMNOT
JALCORAIL from the J-QUARTZ range from Jallatte is a low safety shoe, has a Shaft made of microfibre and TEX-TEC. iIs antistatic, has a sole made of polyurethane J-Quartz, equipped with the JAL'GRIP system and a safety toe cap made of composite Xetane B and perforation-resistant sole. EN ISO 20345:2022 A1:2024 From 35 to 48
High shoe S3 in waterresistant black full grain leather with uvex waterstop technology for protection against splashing water and 200J synthetic toe cap and steel antiperforation sole. Innovative uvex bionom x design creates a biomechanical symbiosis between the foot, the upper, the sole and the floor. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU (i-PUREnrj) with strong antislip values and very good shockabsorption. Free of phthalates and silicones. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 38-52.
Small, multifunctional bin for quick and efficient response to leaks or maintenance projects, anywhere in the factory. The spill kit includes a handy inner panel with well organised, clearly legible leakage guidelines. Absorption capacity: 69 litres. Content: 1 ro ll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of MRO qualit y.
Universal anti-fog visor (1.15 mm) made of cellulose acetate. Shape 2: width 450 mm, height 250 mm. For mounting on Lunar and Monteclipso. line with: EN 166, EN 170.
