BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Economical basic harness with 2 anchor points and classic buckle closures (buckle-by-buckle). Universal size. Adjustable shoulder and leg straps. Maximum user weight: 140 kg.
Specially designed for working in environments with potential electrical hazards. Adjustable shoulder and leg straps, and an adjustable hip belt. The polymer-coated metal buckles and D-rings provide electrical insulation up to 12 kV. Universal size. Suitable for a maximum user weight of 140 kg. Best used with electrically insulating lanyards (1064014/1064015).
Mobile and universal anchor point, for use by 1 person.
With a D-ring at each end. Suitable for use in ATEX Zone 1 and for one user only.
Temporary webbing lifeline with adjustable length from 5 to 20 meters, suitable for two people. It can be attached directly to a structure or to an anchor point using the supplied snap hooks (2). Supplied in a convenient carrying bag.
Temporary horizontal lifeline with a maximum length of 18m, easy to install. Durable plastic housing with a carrying handle and tension indicator. Built-in shock absorption mechanism to limit impact forces during a fall. Suitable for two people and can be used in Atex Zone 1 environments.
Temporary, portable, and freestanding anchoring system for use on TPO roofing or concrete surfaces. The anchor point is equipped with an energy absorption system. The bottom plates have a rubber anti-slip backing. Consists of 4 cast plates and 12 top plates, each weighing 25 kg (55 lbs), (total weight: 416.5 kg). May only be used with all associated components. Suitable for 1 person.
- Fall arrest device with 10-meter cable and rescue winch - With internal energy absorber - Carabiner with fall indicator - Plastic housing - Suitable for confined spaces - vertical use - Weight: 7.40 kg - Maximum user weight: 140 kg (vertical use) - EN360 - Atex - With adapter 1063982, this can be mounted on tripods 1063976/1062545
Atex fall arrestor with stainless steel cable and integrated rescue winch, can be attached to Kratos tripod 1063976/1062545 using adapter 1062544. Max user weight: 140kg (vertical use).
Work and rescue winch, mountable on Kratos tripods. Suitable for hoisting or lowering materials (min. weight: 60 kg, max. weight: 250 kg - in accordance with the Machinery Directive) and persons wearing a seat harness. In the event of a person being evacuated, they may be hoisted or lowered a maximum of 2 m. Maximum person weight: 135 kg. 6 mm synthetic rope. Suitable for use in Atex environments. Complies with Machinery Directive 2006/42/EC, EN 1496:2017 Class B, EN13157:2004, Atex Directive 2014/34/EU.
Automatic descent and evacuation device for one person. Suitable for rapid rescue operations. Descent speed of approximately 2 m/s regardless of weight (max. user weight: 141 kg). Includes 20m of 9.6 mm kernmantle rope with two carabiners and a handy carrying bag. For use by one person.
Kernmantel rope, 2m long, 11mm diameter, with steel snap hooks and a ring adjuster to adjust the rope length. The seams are protected by a strong, transparent protective sleeve that protects the ends and makes the seams visible, making inspection before use easy. For positioning only.
Kernmantel rope 11mm diameter with aluminum snap hooks, including one scaffold hook. The seams are protected by a strong, transparent protective sleeve that protects the ends and makes the seams visible, making inspection before use easy. For positioning only.
Kernmantel rope with a diameter of 12mm, assembled with a non-removable rope clamp and energy absorber. It features a steel snap hook (manual locking) on one end of the rope and a knot on the other. Suitable for use near sharp edges. The rope stitching is protected by a strong, transparent protective sleeve that also facilitates visual inspection of the seams before each use.
High shoe in oiled leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48.
Post with diameter 48mm, height 3.5m with ground anchor, for mounting windsock.
Moisturizing skin care cream for highly stressed and dry skin. Dispenser: 1060646
Robust mulitgas detector with built-in pump for vrijgage confined spaces. Designed for harsh environments with a 95dB audible alarm. Detects simultaneously: %LEL, H2S, O2 and CO. Battery autonomy: up to 50h. With catalytic low power (fltered) LEL sensor. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST.
Robust mulitgas detector with built-in pump for vrijgage confined spaces. Designed for harsh environments with a 95dB audible alarm. Detects simultaneously: %LEL, H2S, O2 and CO. Battery autonomy: up to 18h. With catalytic (unfltered) LEL sensor. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST.
Robust mulitgas detector with built-in pump for vrijgage confined spaces. Designed for harsh environments with a 95dB audible alarm. Detects simultaneously: %LEL, H2S, O2 and CO. Battery autonomy: up to 100h. With infrared (non-dispersive) LEL sensor. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST.
A low-cut safety shoe with an outdoor-inspired design. With an upper reinforced with technical ripstop fabrics, light and resistant. EVA/hydrocarbon-resistant and non-slip rubber sports sole. Lightweight 200J aluminium toe cap, anti-perforation sole (wide toe cap) in composite, light, flexible, athermic and non-magnetic, ESD. Versatile, the ULTRA is designed for logistics, transport, light industry and construction finishing. • Model that meets the requirements of ESD environments. • It adapts perfectly to dry indoor and outdoor environments.
Aluminum bottle of 116 liters with test gas for calibration of Watchgas detectors. To be used for manual calibration or to be combined with the Watchgas docking station SST1/SST4 (1062077) Always to be used with the release valve 1062078. Contents: 18% O2 / 2.2% CH4 /50ppm CO / 10ppm H2S in N2. Certificate included.
Fabric head harness for Cleanspace masks.
Head harness non-fabric for Cleanspace masks.
Gas detector reusable multigas detects %LEL, H2S, O2 and CO simultaneously. Including batteries and induction charger. Equipped with NFC and a large display that clearly shows information. Correction factors can be set with the free WatchGas SST Range app. The device is robust and is equipped with stable sensors that remain reliable under extreme temperatures and conditions. Can be calibrated every six months. Alarm values low and high: O2 19.5%-23.5%, CO 35-200PPM LEL 10%-20%, H2S 10-15PPM. Alarm settings can be set to the user's preference with the SST Docking Station (1062077) and the free Watchgas app. Equipped with an IR LEL sensor, suitable for inert applications, cannot detect hydrogen and acetylene!
Filters to protect sensors of the SST4 Micro.
Filters to protect sensors of the SST4 Mini.
The SST Dock is an automated test station that allows Bump and Calibration testing and is compatible with the full SST Range in one module. It has the capability to be connected via Wi-Fi, BLE or Cellular and allows for desk, wall and hard case mounted dependent on your application. This kit comes in a hard case and has room for 2 gas bottles and a regulator.
Tool to bump the SST1 detector without using the Watchgas app. Runs on 3 AA batteries (not included).
Tool to put the device to sleep for a maximum of 365 days without using the Watchgas app. Putting the device to sleep can extend its lifespan up to an additional 1 year. Runs on 3 AA batteries (not included).
Filters to protect sensors of the SST1 detectors.
Test cap as a spare part of the SST1, needed to bump test and manually calibrate the device.
Replacement clip including screws for all SST series detectors.
Test cap as a spare part of the SST4 Micro, needed to bump test and manually calibrate the device.
Test cap as a spare part of the SST4 Mini, needed to bump test and manually calibrate the device.
Hydrophobic filter to protect the pump of the SST4 pumped.
Single gas gas detector easy to operate with 1 button. Equipped with NFC, making the device easy to connect to the free Watchgas app, and therefore easy to manage. Equipped with reliable and stable sensors, developed according to the latest technology. Display shows real-time values. Alarm values can be set by connecting to the app, or by using the docking station. Battery and sensors can be replaced.
Replacement battery 3.6V for gas detector serviceable Watchgas SST1
Single gas detector with limited life of 3 years without maintenance. Displays only remaining lifetime on screen, no concentrations. H2S with alarms at 1.6PPM and 3.2PPM. (min. 1.6PPM and 20PPM)
Large key cabinet Select Access SMART™ with shackle - Size L - Unlocking via Bluetooth with smartphone/tablet via the free app in Apple Store and Google play. To share access with others - once or permanently - and thus maintain access overview.Auxiliary access via numeric keypad. Supplied with installed CR123 battery - battery life: up to 2 years (in standard opening mode) Provides alert in case of break-in attempt and weak battery. Bracket with vinyl coating & ABS vinyl body casing Ø 10mm. Suitable for indoor and outdoor use.
Medium size key safety box. Weather resistant aluminium housing. Mounting kit included. Programmable 4-digit combination lock.
Security locker for keys, large format with removable bracket so it can be hung in different places or permanently fixed to a wall. With a user-definable number combination consisting of 4 digits. Equipped with a weatherproof cover to protect against bad weather conditions. Dimensions: 196x76x56mm.
Hardened steel chain resists cutting, sawing and prying. Nylon sheath protects against scratches. Hardened steel mini U-lock Disc cylinder for increased pick resistance. Vinyl lock cover prevents scratches. Silver Sold Secure certified.
800mm folding lock with combination lock and integrated holder, for mounting on a bicycle frame.
Solid aluminium housing with 50mm high steel shackle, with adjustable 3-digit combination. Assortment of 4 painted colours: blue, green, pink, yellow.
Glove with excellent grip in oily environments, preventing slippage and injuries. Coated knuckles and triple nitrile foam palm coating for a solid oil barrier. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.2.C, EN407:2020: X.1.X.X.X.X
Glove with excellent grip in oily environments, preventing slippage and injuries. Fully and triple coated with nitrile foam in the palm and a latex-free cuff. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.2.C, EN407:2020: X.1.X.X.X.X
Padlock with a width of 70mm, housing in stainless steel. The octagonal shackle has a diameter of 10mm and is made of Tough-cut-boron-carbide, which is 50% harder than hardened steel. 4-digit self-adjustable combination. Extremely suitable for outdoor use.
Black laminated steel housing 40mm wide provides maximum strength and reliability. Diameter 9mm shackle is 29mm long and made of hardened steel, making it extra resistant to cutting or sawing. Weather and dirt resistant. Cylinder with 4 pins provides extra protection against breaking open. Delivered with 2 keys.
Accordion gate in ultra-resistant polypropylene in striking colours for indoor and outdoor use. Equipped with weighted feet for unwavering stability even in bad weather conditions. Multiple gates can be linked together. Supplied with reflector strips for optimum visibility. Dimensions: height 104cm, width 50cm, length unfolded: 3m, folded: 44 cm.
Unique system: 2-point harness integrated in a backpack. Backpack has a separate compartment for storing a safety helmet and an extra compartment for storing a fall block or lanyard. The advantage is that everything stays together, and is ideal for inspectors who do not know in advance whether they have to work at height, and in this way are always provided with the necessary PPE. Backpack is equipped with auto-lock zippers that do not unzip further when the bag is partially opened, is equipped with reflective accents and waterproof.
Removable hook for attaching to a harness and hanging tools, or to the hooks of a lanyard when not in use. This is not an anchor point for fall protection or rescue under any circumstances!
Removable extension strap with D-ring for attachment to the dorsal anchor point of Kratos harnesses from the Premium series, and for use only in conjunction with a fall arrest block. This extension allows for easy anchoring on the back.
Fixed anchor point suitable for steel or concrete walls, ceilings, or roofs. Size M10, suitable for one person.
Fixed anchor point suitable for steel or concrete walls, ceilings, or roofs. Size M12, suitable for one person.
Universal anchor point for one person with a protective sleeve. Suitable for structures with sharp edges.
Anchor point for one person, suitable for horizontal or vertical I-beams with a width of 100 to 340 mm. For use only as a vertical anchor point (overhead). Suitable for use in Atex environments.
