BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
T-shirt sleeveless, 100% cotton. Available colors: Light gray, black, white, yellow, red, orange, purple, lime, kakhi and navy. Available sizes: XS-XL.
The Berkel is a soft hi-vis fleece jacket that is lined at the front with a fixed windbreaker and offers optimum protection against cold and wind. This fleece with inner pocket and two inset pockets with zipper is pilling-resistant. The sleeve ends and the waist have elastic cords so that the fleece fits perfectly around your body. Quality: 100% polyester; ± 285 g/m² Available sizes: S-3XL. Available colours: Hi-Vis Orange.
Coverall made of carbon fleece / aluminized para-aramid 430g / m² - grain leather collar - zipper under flap closed by hook-and-loop fastening and snaps - KEVLAR® thread seams - lined in fire-retardant cotton treated with Proban® network of pipes sewn on the lining to diffuse the air towards lower / upper limbs / body - the air in overpressure circulates between the lining and the external layer and is charged in heat and evacuates it which refreshes the interior of the suitFaucet holder max 7 bars on belt (unless suit supplied with ventilated hood) to be connected to a filtered "breathable quality" filtered clean air network - limited intervention time and ambient temperature. Suit without belt or tap because used in addition to a ventilated hood E5111-611. Available sizes: M-XXL. Complies with: EN ISO 11612 A1B1C4D3E3F1.
High shoe in waterresistant nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breath able, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
Technically constructed sock that is flat-knit and uses mesh panels to enhance the features of the sock. Thanks to its mixed knitting technologies it fits perfectly on the foot, reduces the risk of blisters and provides extra support and ventilation where needed. Integrated toe seam. Merino wool 60%, Polyamide 35%, Elastane 5%. Sizes: 36/39, 40/44, 45/48. No PPE.
Workvest 50N with strong Wipe 550 Clean smooth synthetic outer skin, dirt-repellent and easy to wipe clean. Oil and diesel resistant. The skin is designed for long time. Filling consist of a special super soft foam with closed cels for extra comfort. Easy adjust by means of two strong waist belts with nexus buckles. The special constructions ensures a long lifetime. Fitted with a crotch strap and panels of reflection on the front and back for extra safety. Available sizes: L-2XL. Available colors: Orange.
Padded hi-vis ladies softshell jacket: • quilted lining • wind, water-repellent and breathable softshell • adjustable and detachable hood • fleece-lined collar and side pockets • two breast pockets • concealed zip at the front • two side pockets • one sleeve pocket on the left sleeve • loop for badge holder • mesh vents • adjustable waist • adjustable cuffs • extended back • reflective piping on sleeves and back Quality: 100% polyester, 250 g / m². Available sizes: XS-3XL. Available colors: fluorescent yellow / black, fluorescent orange / black, fluorescent yellow / navy and fluorescent orange / navy. Conforms to: EN ISO 20471 Class 3/2.
Coverall with hood, elastic face opening and chin flap for a tight fit around the breathing mask, stitched and taped seams, double adhesive zip, double zip and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle-tight fabric, excellent barrier against a wide range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Anti-static treatment (inside). Includes non-dissipative gloves. Available sizes: S-3XL. Available colors: gray. In accordance with: EN 1073-2: 2002, EN14605: 2005 + A1: 2009 (Type 3/4), EN ISO 13982-1: 2004 + A1: 2010 (Type 5), EN 13034: 2005 + A1: 2009 ( type 6), EN14126: 2003 and EN 1149-5: 2008.
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Nitrile coating on the palm with sand grain finish for extra grip. Fleece lining for extra warmth in cold temperatures. Reinforced thumb hole to reinforce high-wear areas. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.F.P
T-shirt, 145 g / m², 100% cotton, pre-shrunk and ring-spun. Ribbed round neck with elastane. No PPE. Available sizes: S-3XL.
These sterile eye compresses are used to protect the eye. The eye compress can also be used when ointment has to be applied. The soft material is easy to model and fits well under an eye cup. Can be worn both right and left. This eye compress is oval-shaped anatomically shaped.
Low-cut, light, perforated safety shoe in microfiber with a sporty look. With breathable textile lining. Comfortable, removable insole. The outsole is made of MONO-PU. Sizes: 35-48.
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Training version of the NH15 Escape Hood is specifically designed for users in an emergency incident. The NH15 is rated for 15 minutes and is available in 3 sizes. It does not require maintenance or fit testing and has a 5 year shelf life.
Men's long-sleeved t-shirt without label. Quality: 50% polyester, 50% Viscose, knitted interlock, 205 gr / m² Available sizes: XS-4XL. Available color: White.
The Peltor COMTAC XPI is an active noise reducting ear muff. Has a 2-way radio communication in noisy environments.
High shoe made of microvelours, fitted with a 200J toecap. With liner in Climazone in antiperspirant textile and comfortable insole providing extra protection against mildew and heat. Sole made of PU/PU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
The Lombatrax differentiates through its unique inflatable expansion system (air chambers) to provide a combination of effective treatment, support and pressure relief in the spine. The ideal solution for drivers! Available sizes: S-3XL.
Multinom jacket Fermi Diablo 13242: atpv 39 cal / cm; Elim 33 cal / cm; breast pocket; 2 front pockets. Quality: POLYAMIDE 100%, 330 gr / m². Available sizes: 44-68 BE. Available colors: Navy / yellow. Conforms to: EN ISO 20471 Class 1, EN ISO 11611 Class 1, EN ISO 11612 A1A2B1C1D3E2F1, En 1149-5, IEC 61482-1-2: 2014 Class 2 and EN 13034: 2005 + A1: 2009 TYPE PB [6].
This super light coverall offers excellent flame retardant protection. The Araflame coverall is soft and breathable but has great tensile and tear resistance. Perfect for use in industry including the oil, gas and petrochemical industries. The coverall features three-needle stitching, secure pockets and an elasticated waist for easy movement. Quality: Araflame Plus 93% Meta-aramid, 5% Para-aramid, 2% Carbon Thread 150g. Available colours: navy and orange. Available sizes: 38-54 PW. Complies with: EN 1149-5 and EN ISO 11612 A1+A2, B1, C1, F1.
These canvas work trousers have triple stitched seams, a hammer loop, a thigh pocket which is lockable, and a ruler pocket. The double hem provides approximately 6 cm length. Available sizes: 42-64. Available colors: navy, black, white, dark gray.
This premium hooded jacket is made of polyester and cotton. The jacket has a thumb hole at the end of the sleeves to keep it down during intensive activities. In addition, the turtleneck and hood ensure that your neck and head stay warm. Available sizes: XS - 3XL. Available colors: Marine.
Ergonomic disposable safety knife with a stainless steel blade that automatically springs back after cutting. As a result, cuts hardly ever occur. NSF certified, not metal detectable. For left and right handed use. Suitable for cutting tape, plastic, paper bags, packing slips, foils, 2 layer cardboard, plastic tape splitter. No PPE.
Signalization polo with mesh under the arms for maximum ventilation. Very light, moisturizing, strong and supple. Welded and segmented reflective tapes. The polo has a permanent anti-bacterial effect that fights odors. Quality: Sio-Cool Comfort: 100% polyester; ± 130 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: S-3XL.
- Elastic lanyard for tools - Hook on one side, loop on the other side - Max load rating: 4.5kg - Lenght: min 81cm to max 119cm when fully extended
Hygiene set for hearing protector VERISHIELD VS120D/VS130DH
Charging station for 1 battery with power.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, easy-clean belt, flow meter, battery and charger, one P-filter and a pack of préfilters. NPF: Depends on hood used.
Flame retardant ladies work trousers with increased visibility in a light and comfortable fabric with a high tear resistance. Back pockets with flap. Cargo pocket with flap, telephone pocket and concealed key ring. ruler pocket. Pre-shaped knees with height-adjustable knee pockets on the inside. Completely metal-free. Available sizes: 36-48. Available colours: Navy/fluo yellow. Compliant: EN ISO 11612 A1+A2 B1 C1 E1 F1, EN 1149-5, EN ISO 11611 Class 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 8.1 cal/cm², EBT: 8.7 cal/cm².
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Fall arrest device Rebel 12 meters galvanized steel cable with integrated shock absorber. Plastic housing. Stops any vertical falling movement almost immediately. Serves as a connection between anchor point and harness. Equipped with ergonomic cable handle and carabiner with fall indicator that allows you to know when a fall has occurred. For vertical <(>&<)> horizontal use.
Gel sealing rings compatible with Comtact XPI headet, featuring 2 foam inserts and 2 sealing rings. Not tested separately as PPE.
To create attachment point on tools. For material lighter than 0.9kg. Always use with Python Safety Quick wrap tape. Not PPE.
A2P3 filter in plastic housing for 3M Secure Click half face masks. Protects against organic gases and vapours and toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5%.
Single lightweight and quick to deploy decontamination shower. Fully inflatable, can be set up in a few minutes and will stay standing without continuous inflation, nor mechanical frame. These shelters are lightweight and compact to transport and to store. Dimensions pack size: 120x70x45cm. Weight: 60kg. Dimensions when deployed: 234x310x260 cm.No PPE.
Gas filter ABE1 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
Gas filter AX protects against orgnaic gases and vapours such as solvents with a boiling point lower than +65°C. To use with half and full face Sundstrom masks.
Flexible and comfortable butyl rubber glove with rough finish. Provides exceptional chemical resistance to toxins, alkalis and acid, esters and ketons, UV rays and ozone, hydrogen peroxide, desinfectant solutions, oxidizing chemicals. Gastight and latex free. Lenght: 35cm, Thickness: 0.7 mm. Sizes: 7-11.
The 3M™ Peltor™ WS LiteCom Pro III ATEX helmet earmuff is a high-performance hearing protector with a built-in communication radio f or cable free short-range communication with other LiteCom headsets and portable two-way radios programmed on the same frequency. Bluetooth® Multipoint connectivity for connecting mobile devices The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy environments. SNR: 32dB. Possibility of programming your own frequencies (not included in the price). In accordance with: EN 352-6
Replacement plugs for 3M™ PELTOR™ TEP, LEP en EEP. Attenuation: 23dB. Not separately tested as PPE.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. No PPE.
The rain protector covers the sensors of the multigas monitor from rain and large debris. No PPE
The metal cage protects the multigas monitor against damage. No PPE
The large headrest is a replaceable part that only replaces the headgear headrest when the original part becomes worn or damaged during use.
Earmuff helmet WS Alert X with Bluetooth and level dependent function (surround). The Bluetooth® headset with noise-cancelling stick microphone connects to your mobile phone for hands-free calling and streaming in noisy environments. The headset helps protect you from dangerous noise while promoting your situational awareness through the level-dependent function for listening to the environment. The headset also syncs with a mobile app, allowing users to easily set up and customize the headset. SNR: 30dB. In accordance with: EN352-3.
• Affordable BLS manikin • Robust and reliable • Realistic chest compression training • Visualization of compression depth • Ambu Hygienic system for mouth-to-mouth and mouth-to-nose resuscitation • Ventilation with a respirator bag is possible • Placing Guedel tubes (when using Guedel face masks) is possible • Realistic ventilation resistance • Correct ventilation volume can be checked • Visible expansion of the chest during ventilation • Closed hull • Easy for AED training
Welding glass in mineral glass. Dimensions: 90X110mm.
Long spare power cable for 3M™ Speedglas™ Worklamp. No PPE.
Multinorm bib and brace Viana: Front fly with zipper; chest pocket with zip closure; 2 patched slanted pockets; 1 back pocket; 1 patched thigh pocket; 1 ruler pocket; 2 side slits; Knee pockets; 2 elasticated adjustable braces; Bib in front and back; Closure by 2 hidden buttons at the sides. Available sizes: 44-64R. Available colour: Hi vis orange/navy.
Glasses with grey polycarbonate duo-lens, equipped with supravision coating. Glasses with adjustable ear springs and soft-flex nose-bridge. Fits the face perfectly. X-tended sideshield for increased side protection. With supravision Excellence coating: Hi-tech coating, scratch-resistant on the outside, free of condensation on the inside, chemically resistant and very easy to clean. Colour frames: lime/anthracite.
Super light glasses (19g) made of clear polycarbonate. Thanks to an innovative new production technology, the uvex pure-fit can be made entirely from just one material. It is made entirely of polycarbonate and is therefore 100% recyclable — just like the product packaging. This makes the uvex pure-fit an extremely durable solution. The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Mobile anchor point in 25mm wide polyester webbing, tested for sharp edges. Anchor point for security of 3 persons or maximum 300kg. Breaking strenght: 22kN
New portable 5-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases, for added precision at work. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,CO,VOC'S.
This polo shirt is very suitable for year-round use, since the fabric breathes and cools in the summer, yet keeps wearers warm in the winter. The polo has a contemporary design, with a slim collar and stylish sleeve cuffs. Availbe in five colours and a wide size range. Quality: 50% Polyester / 50% Polyester, CoolDry, 180 g/m². Available colors: navy, white, royal blue, dark gray and black. Available sizes: XS-6XL.
The 3M™ Premium 4-Point Chin Strap X5-S4PTCS1 is an optional extra for the 3M™ SecureFit™ X5500 Series Safety Helmets. The adjustable chin strap has a synthetic buckle. No PPE.
The 3M™ Short Visor X5-SV01-CE is molded from polycarbonate and features a scratch-resistant anti-fog coating. The visor is designed to fit 3M™ SecureFit™ X5000 and X5500 Series safety helmets.
Face shield in clear polycarbonate, length 175 mm. For use on EVO safety helmets. Marking: 1 B 3 9.
Chin piece S91C, suitable for attachment to face shield Surefit 175mm PC (1055809) and CA (1055811).
Green, latex-free disposable glove in Neoprene, suitable for use with touch screens.
Aluminum splint consisting of a roll of padded aluminum that can be folded into various shapes and adapted to the body part to be im mobilized. Can be used for arms and legs but also as an alternative to a neck collar. Is X-ray permeable. Dimensions: 11x91 cm.
Reflective stickerset of 10 pieces for the Evo2/3 helmet. No PPE.
Retractable telescopic pole of glassfiber to attach the rescue line to the harness of a fallen person. To combine with carabiner 1056763 and the evacuation kit 1056761 in order to save a victim without to descend yourself. The snap closure is held in an open position. Lenght: 0,75 - 3m. Comes with a transportation bag.
High shoe in velours microfiber. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
