BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for narrow arms. with thumb hole Lenght 30 ,5 cm.
Work jacket with concealed press stud fastening, 2 front pockets with flap, 2 inset chest pockets with flap, loose inner pocket, 2 escape mask loops, sleeves with adjustable press studs, RWS striping and extended back. Quality: 50% / 49% / 1% polyester / cotton / carbon + DWR, 295 gr / m2. Available colors: Fluo orange. Available sizes: XS-4XL. Complies with: EN 1149, EN 13034, EN 343, IEC 61482 class 1, EN ISO 11611 class 1, EN ISO 11612, EN ISO 20471 class 3.
Microflex flame retardant rain pants: - Elastic waist; - Welded seams; - Adjustable snap closure on the legs; - Wind and waterproof. Quality: PVC-PES / COT, 390g / m². Available sizes: L-3XL. Available colors: Royal blue. Compliant with: EN 343 class 3: 1, EN ISO 14116, EN 1149-5, EN 13034 and IEC 61482-2 class 1 (21.1 cal / cm²).
The socks have excellent insulating functions and retain heat even when wet. They absorb and transport perspiration away from the skin without losing their function of heat retention. Socks have terry knit feet and rib knit shafts. Merino wool 64%, Polyamide 35%, Elastane 1%. Sizes: 36/39, 40/44, 45/48. No PPE.
Uncoated polycarbonate screen as spare spart of hoods M-106, M-107, M-306, M-307, M-406, M-407. No PPE.
Work trousers with concealed zip, 2 inset side pockets, 2 back pockets with flap, ruler pocket with flap, thigh pocket with flap, knee pockets, extra insert at crotch to prevent tearing out, reflective tape. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin weave + DWR, 280 gr / m2. Available sizes: 44-66, lengths 14-57 and belly sizes 24-29. Available colors: Black / gray, cornflower blue / navy, gray / red and gray / blue. Conform: EN ISO 11611 class 1, EN ISO 11612 A1A2B1C1E2F1 and IEC 61482-2 class 2.
The Squids® 3132 Scanner Lanyard Harness keeps barcode scanners secure and accessible during warehouse and distribution work. With its ambidextrous design, the industrialgrade harness maintains a comfortable fit for both right- and left-handed workers while keeping scanners ready for use. Two small loop attachments connect to captive holes built into the scanners, allowing them to hang comfortably on the hip when not in use and preventing damage or injury caused by drops. Can be combined with holster (art. 1054143).
Salvequick Fngertip plasters are high quality flexible plasters. The patches are allergy tested. They are easy to apply, flexible and easy to use. Pack of 6 refills. Each refill contains 15 plasters (87 x 56 (23) mm).
Signa work trousers with stretch: • 4-way stretch material for extra freedom of movement • leg pockets with zip • fastening for nail pockets • zipper • preformed knees • adjustable knee pockets on the inside, reinforced on the outside. Available sizes: C44-C64, D84-D120, C146-C156. Available colors: fluorescent yellow / navy, fluorescent orange / black and fluorescent yellow / black. Conforms to: EN ISO 20471 class 1.
This multinorm work jacket has a regular fit and an ergonomic fit with a pleasant wearing comfort. The multifunctional pockets provide plenty of storage options. Quality: 74% Cotton / 25% Polyester / 1% Carbon, 320 g / m². Available colors: Marine / fluo yellow. Available sizes: XS-5XL. Conforms to: EN 1149-5: 2018, EN 11611: 2015, EN 13034: 2005, EN ISO 11612: 2015, EN ISO 20471: 2013 Class 2, IEC 61482-2: 2009.
The Mulitnorm Bicolor Work Pants protect against various residual risks from the work environment. Quality: 74% Cotton / 25% Polyester / 1% Carbon, 320 g / m² Available colors: Fluo yellow / navy. Available sizes: Size range 42-66 NL. Conforms to: EN 1149-5: 2008, EN 11611: 2015, EN 13034: 2005, EN ISO 11612: 2015, EN ISO 20471: 2013 Class 1, IEC 61482: 2009.
Welding curtain in self-extinguishing matte green PVC in Robusto single frame, for indoor use. Frame with 4 swivel castors, 2 of which have brakes. Height: 180 cm, width: 220 cm, curtain thickness: 0.4 mm. In accordance with EN15998.
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing.Sizes: 8-11. Thickness: 1,5mm, Lenght: 360mm Certified for resistance to acid (Category A), Ozone (Category Z) and very low temperatures (Category C).
For eye protection designed for comfort, performance and compatibility, select the 3M™ SecureFit™ 500 Series. These contemporary safety glasses feature a sporty streamlined lens shape and weigh just 22 g for a sleek, stylish look. 3M’s innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. The adjustable ratchet temples offer even greater customisation by allowing user to adjust the lens for facial features and eyeglass position. These glasses can combine well with other personal protective equipment.
Hi-vis fleece jacket Senic: upright collar; Zipper with chin guard; 1 inset chest pocket with zip; 2 inset zip pockets; round sleeves; Elastic in sleeve end; Long zipper loop for extra easy opening. Quality: 100% polyester double-sided fleece; ± 285 gsm. Available sizes: XS-3XL. Available colours: Fluo yellow/navy and fluorescent orange/navy. Complies with: EN ISO 20471 : 2013 +A1 2016 / Class 3 and EN 14058 : 2017 / Class 1 1.
Extension for the easy-to-clean belt for motor unitTR-600.
The polo sweater with collar is ideal for work in an outdoor environment, because the mix of combed cotton and polyester keeps the w earer warm. The sweater has a neck tape, a 3 button fastening and an elastic hem at the bottom. Quality: 60% cotton / 40% polyester, American fleece, 280 g / m². Available sizes: XS-7XL Available colors: Red, wine, gray anthracite, gray melange, navy, royal blue, bottle green, black, white, lime and dark gray.
Disposable safety knife with a safe hidden blade, especially for cutting foil and paper in the food industry. Metal detectable blue plastic with stainless steel blade. No PPE.
Stainless steel safety knife, NSF certified, metal detectable. Highest cutting level with integrated blade. Blades are replaceable. Consists of 100% stainless steel and is easy to clean. Suitable for left and right-handers. Cuts plastic, paper bags, tape, strapping tapes, foils, 1-ply cardboard. Replacement blade: 1052578
Spare part for motorunit TR-800.
Protective visor for Kask helmets Zenith. Easy to install. Sratch- and fog-resistant.
The Basic Outerwear Silver Ion treatment fights odors and improves the lifespan. The outerwear fits well for optimal moisture removal and is suitable to wear during all seasons. Quality: 93% Moisture Wicking Polyester,7% Elastane Silver, 165g/m². Available sizes: S-2XL. Available colours: Black.
P filter for motor unit Versaflo. Protects against highly toxic dust ,mist and smoke particles. Saturation of the filter is only detectable by an increase in (inhaling) resistance, the motor unit will alarm.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 72 inches. Material: plastic.
Bottle of 110 liters with test gases for calibration of gas detectors. To use to calibrate manually or to combine with the Micro Dock II. Always use a shutter. Content: CH4 (2.2%).
Safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and 6-points suspension with wheel adjustment. Helmet with 30mm slott.
Robust belt clip for Twig NEO rotates 90 ° so that the device can be worn both vertically and horizontally. The belt clip is securely attached to the device with screws, glue and a bracket.
A simple method for measuring the time-weighted average concentrations of gas- and vapour-phase air contaminants. The monitor must be attached to the clothing, close to the breathing zone, during the work. The contaminants are absorbed by an active carbon layer. Monitor must be analysed in a laboratory at a later time. Measurement of: organic vapours. Shelf life: 18 months in sealed packaging. Does not produce alarm.
Removable leg paddings for more comfort. Fits all new models of 3M ™ Protecta® harnesses. No PPE.
Air duct breathing hose for Speedglas Heavy Duty helmet G5-01. No PPE.
Headband for the frontside of the welding helmet Speedglas G5-01. Not certified as PPE itself.
Super-light safety helmet for working at height, with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (53-63 cm) with MIPS and sweatband. The Nexus Extreme Mips combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is required. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Super-light safety helmetwith short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64 cm) with MIPS and sweatband. The Nexus Extreme Mips combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Additional 4-point chinstrap harness. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Cap B010 with adjustable size for a perfect fit. Quality: 65% PES, 35% Cotton 190g/m².
Headband for welding helmet Speedglas G5-01. Includes attachment set. Not certified as PPE itself.
Flame retardant ladies T-Shirt with round neck and long sleeves. Extended back. Quality: Merino RX, 200 gsm. Available colours: Black/grey. Available sizes: S-2XL. Complies with: EN ISO 11612: A1+A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5, TRANEMO SKINSAFE, ARC RATING: 5.5 cal/cm².
Nova 3 hood, includes: NV3-750 nylon cape, NV2030 low flow indicator, NV2021B breathing tube, C40 constant flow air supply system with mail coupling CEJN 342, air conditioning unit
Low shoe in waterrepellant full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a textile 3D-lining . Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
Cleanroom goggles, OTG compatible and very wide panoramic view. Autoclavable. Frame colour: transparant. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes the Supravision Clean coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Sweatband removable for cleaning. Fits 3M SecureFit™ safety helmets, series X5000 and X5500. No PPE.
Winter cap. 80% cotton, 15% polyester, 5% Spandex. Sizes: M/L. Color: HiViz orange. No PPE.
Low shoe in black textile composed of high tenacity polyamide with synthetic 200J toecap and synthetic antiperforation sole. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in EVA/VIBRAM. Sizes: 35-50.
A very thin and flexible nitrile-dipped ESD glove for ESD-protected work areas where maximum dexterity is needed. The glove has touchscreen functionality, ensuring seamless transition between duties without having to remove the glove. Thin 18 gg fibre and highly breathable to ensure all-day comfort. CAT II . In line with : EN ISO 21420:2020 - EN 407:2020 X 1 X X X X - EN 16350:2014 R <(><<)> 1,0 x 10⁸ Ω - EN 388:2016+A1:2018 4 1 1 0 X - IEC 61340-5-1:2016 R <(><<)> 1.0 x 10⁹ Ω
TYVEK® IsoClean® frock with bound neck option 0B (Bulk packed) Bound seams. Covered elastication at wrists. Front snap closure for easy donning and doffing. White. Available sizes: S - 3XL For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.
TYVEK® IsoClean® boot cover IC 458 B WH MS Bound seams. Covered elasticated leg opening. Ankle ties. Slip-retardant Gripper™ sole. White. Available sizes: S - XL S fits up to EU 37 M fits up to EU 39,5 L fits up to EU 48,5 XL fits up to EU 53 For cleanrooms up to ISO 5, GMP A/B CLEAN PROCESSED + STERILE.
Tyvek® IsoClean® IC 729S WS Bouffant Elastic headband. Packed in a dual barrier validated packaging system (double bagged). White. Available sizes: one size For cleanrooms up to ISO 5, GMP A/B STERILE ONLY.
Chill-Its 6689 Cooling Long Sleeve Sun Shirt with UV Protection. Available sizes: S - 3XL Available colours: Blue, lime
"Parka, Gore Tex Pyrad TM Fabric Technology, 2-layer laminated in polyester, waterproof, windproof, breathable (WWB). This parka combinest this WWB principle with the highest protection against heat and flame and arc-flash. Permanently anti-static technology. Industrial laundry at 60°C. Available sizes: S-4XL. Polaire zippable: 1046734.
Kit with SR 500 EX fan unit and protective helmet SR 580. Contains, SR 500 EX fan unit, SR 580 protective helmet, battery SR 501 EX, battery charger SR 513 EX, belt SR 508 EX, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 pre-filter, 2 pcs pre-filter holder, flow meter, plug kit, cleaning wipe and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Charger as accessory for motor unit Clean air Chemical.
Complete kit with Speedglas heavy duty welding helmet G5-01, welding filter G5-01/03TW, Adflo particle filter, adflo motor unit and carrying case and consumables.
Non-Metal, soft and comfortable Inherent Flame Retardant sweatshirt with hood and increased visibility.
A simple method for measuring the time-weighted average concentrations of gas- and vapour-phase air contaminants. The monitor must b e attached to the clothing, close to the breathing zone, during the work. The contaminants are absorbed by an active carbon layer. M onitor must be analysed in a laboratory at a later time. Measurement of: formaldehyde. Shelf life: 18 months in sealed packaging. Do es not produce alarm.
Protective film for safety goggles Ultravision 9301.
Silverfront for welding helmet 100 series.
Sign according GHS normation in self adhesive polyester: oxidising. Size: 40x40mm. 20 labels per card. No PPE.
Speedglas braces compatible with the Caterpillar Compact Air and Barisoft belt.
Rectangular neothermglass for bochumer face screen carriers. Dimensions: 62X52MM, shade 7.
Fire resistant rescue hood that can be connected to the second terminal of a compressed air device. Once connected to the blower, the victim is supplied with fresh air. Visor treated against fogging. Is stored in a fire retardant and waterproof bag.
Peltor ALERT is the ear muff that allows you to still hear surrounding noises, so you won't be isolated. Two sensors track all the ambient noise below 82 dB: loud noises are reduced, soft sounds amplified. On top of that you can listen to radio stations on FM and AM frequencies.
Replacement plastic sweatband suitable for use with all Peltor safety helmets. Not saparately tested as PPE.