BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Small emergency kit filled with the essentials for an emergency situation. Contents: 1x 1220 IFAK pouch 21x15x11 cm 1x BRL-GR-1 Green glow stick (single) 1x 1256 Magnesium fire starter 1x 4101b Sterile pressure bandage 7 x 10 cm (single) 1x 18640 Cova disinfectant spray 50 ml 1x 269049 Rescue scissors 18 cm 1x 798K Tweezers 1x 400010-5 Sterile compresses 5 cm x 5 cm, pack of 5 1x 132226A Elastic bandage white 4 cm x 4 m 1x 1260 Multitool pocket knife 1x 732 Thermal blanket
Salvequick Blue X-Ray plasters designed for use in the food industry. Detectable using X-ray or metal detectors. 6 refills of 30 pieces.
An elastic bandage with excellent adhesion, suitable for elbows, knees, and joints. 5 meters & 6 cm.
The Boston splint is an adjustable, X-ray translucent splint covered with a non-toxic material that is easy to wash and disinfect. 11 cm x 92 cm.
The world’s smallest AIS Man Overboard (MOB) device with integrated VHF DSC. MOB2 immediately transmits your location via AIS and activates a DSC distress call on your vessel’s VHF radio, delivering a rapid local alert to crew and nearby boats.
USB-C power adapter 220V/20W
Short sleeve T-shirt from the High Visibility+ collection, contrast round neck and sealed segmented reflection. Made from 60% organic cotton and 40% recycled polyester. 170g/m².
Option for the LOX4 outdoor charging locker (1064583) to equip the charging locker with perforated metal shelves, a heating cable, and an aerosol system. In the event of a significant temperature increase, the heating cable will melt and activate the aerosol. The aerosol can spread throughout the entire locker and cool or extinguish the heated or burning battery. Important: If you require this option, it must be ordered together with the cabinet.
Option for the LOXK1100 battery cabinet (1063272) to equip the cabinet with an aerosol fire suppression system. Upon detection of smoke, the aerosol is immediately activated and dispersed throughout the entire cabinet. The aerosol cools and controls the battery. Note: This aerosol kit is only sold with the cabinet.
Option for the LOXK12 battery locker cabinet (1063274) to equip the cabinet with an aerosol fire suppression system. Upon detection of smoke, the aerosol is immediately activated and dispersed throughout the entire cabinet. The aerosol cools and controls the battery. Note: This aerosol kit is only sold with the cabinet.
High-cut chemical glove. Strong grip. 18-gauge HPPE liner. FOOD approved Sizes: 6-11, length: 350 mm. Compliant with: EN388:2016 4.X.4.3.F, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 EN407: X1XXXX
Looking for a sporty and agile safety shoe? The ultra-light E-BOUNCE S1PS WHITE/LIME lets you move effortlessly. Thanks to the sole that returns energy with every step, you experience a unique "bounce". This allows you to work comfortably, fit and optimally protected all day long. Lightweight and dynamic Energy-returning sole Non-slip sole Sizes 36-40 made on a narrow last
Fire Retardant Safety Cap This safety cap is made entirely of 100% cotton, making it both comfortable and flame-resistant. Cotton is a fire-retardant material that provides extra protection in high-risk environments. The cap complies with the EN 812 standard to ensure optimal safety and features an elastic band at the back for a secure fit, preventing it from slipping during work. Thanks to its integrated protective shell, the Fire Retardant cap offers not only impact protection but also fire resistance. Perfect for those who want to combine warmth, comfort, and maximum safety in one product.
The ECO safety cap made from recycled polyester is produced using fibers and a sustainable manufacturing process, reducing its environmental impact. The goal is to promote more eco-friendly practices. This cap features a protective shell compliant with the EN812 standard to safeguard the head against impacts. It is available in black and navy blue, with a 5 cm visor. An elastic strap at the back ensures better stability on the head.
Stainless Steel 304 Pole without Base - 2000x40/100/40/100 mm. Suitable for Red Star (1064579) and Diamond (1064580) lifebuoy cabinets.
This premium safety helmet combines maximum protection with outstanding comfort. The fire‑resistant chinstrap is flame‑retardant and non‑melting, while the click‑in system allows quick replacement of the internal padding. Thanks to the Adaptive Fit System, the helmet automatically adjusts to the shape of the head, with a quick‑release buckle for easy removal, even when wearing gloves. The HD EPS inner shell with thermoformed cover provides excellent shock absorption, and the DRY+ liner keeps you feeling fresh. Reflective decals enhance visibility, while 14 ventilation channels with a sliding closure ensure optimal airflow. The Easy Click System makes it simple to add eye or face protection, and the anti‑intrusion mesh prevents dust and debris from entering. This helmet is built to deliver safety, comfort, and performance in demanding environments.
Kit with adaptors and protective visor for Kask helmets Zenith and primero. Easy to install. Sratch- and fog-resistant.
Kit with adaptors and visor Full Face for KASK Zenith and Primero. Easy to install. Sratch- and fog-resistant.
A good looking and sporty comfortable mid cut safety boot with perfect fit and classic look. It has the highest level of protection with aluminium toecap and nail protection in plasma treated composite textile. The boot has an excellent shock absorbing system (Ergothan) which makes it comfortable to use a hole working day. Oil resistant outsole, ESD protection. The mid cut provides extra ankle support.
Trusted Purofort® protection, with the fit of a sneaker.
uvex 1 x-cite - Dress up for safety
Multirnom ECO work jacket with arc flash protection, made from 50% FR cotton, 30% Tencel Lyocell, 19% recycled polyester, and 1% antistatic.
Work jacket with arc flash protection. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Lightweight work trousers with arc flash protection. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Work trousers with arc flash protection, welding class 2. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Inherently flame-retardant Multinorm work trousers, made from 54% modacrylic, 45% Tencel Lyocell, and 1% antistatic.
Ansell HyFlex 11-814: Ultra-thin, breathable work glove with exceptional sensitivity, strong grip, and excellent comfort – ideal for precision work. 18 gauge. Nitrile foam coating. Sizes: 5-12 Compliant with: EN388: 3121A
Handmade tough firefighter backpack, made of sturdy and water repellent ripstop fabric. The backpack is 18 cm deep, 40 cm wide and 45 cm high. Equipped with a laptop compartment (15" max) and wide shoulder straps and safe marking. Patch with inscription to be ordered separately (1065151, 1065152 or 1065153).
Large trolley bag for firefighter gear, suitable for storing your firefighter suit, boots, and helmet in separate compartments. This wheeled trolley bag can also be used as a travel bag. Patch with inscription to be ordered separately (1065151, 1065152 or 1065153).
Firefighter bag suitable for a weekend getaway or for use as a sports bag! The firefighter bag has a separate compartment for your shoes. The dimensions of the firefighter bag are 30 cm deep, 60 cm wide, and 32 cm high. Patch with inscription to be ordered separately (1065151, 1065152 or 1065153).
Duffle bag suitable for storing a firefighter suit, boots, and helmet. In addition, this duffle bag can also be used as a travel bag. The dimensions are 39 cm deep, 66 cm wide, and 29 cm high. Patch with inscription to be ordered separately (1065151, 1065152 or 1065153).
Handcrafted, sturdy toiletry bag made of durable and water-repellent ripstop fabric.
Patch for firefighter bags with the inscription "brandweer", back equipped with velcro.
Patch for firefighter bags with the inscription 'sapeurs pompiers', back equipped with velcro.
Patch for firefighter bags with the inscription 'flame', back equipped with velcro.
Float to hang at the end of a sampling hose to prevent the hose from ending up in water.
Glove with high cut protection (51N) and latex coating for excellent grip. Leaves no marks on surfaces. Sizes: 7-11 Compliant with EN 388 3X43F, EN407:X2XXXX
Glove with high cut protection and impact protection. Nitrile coating. Very fine knit, 0.85 mm. 18 gauge. Touchscreen on all fingers. Thumb cavity reinforcement. Sizes: 6-12 Complies with: EN388:2016 4X43FP
Freestanding combination safety shower 8352FP AXION - freeze-protected design with buried valve – no electricity needed- with grate activation platform - green ABS plastic showerhead - AXION eyewash head and shower head – 1-1/4" piping – ideal for outdoor industrial use
Freestanding combination shower 8350FP AXION. Self-draining design prevents water from freezing or overheating. Includes a grid activation, green ABS plastic shower head, AXION eyewash head, and shower head. 1-1/4" pipe connection. Ideal for industrial outdoor use and harsh environments. PPE category: not applicable.
This durable and comfortable welding shoe (EN 20349‑2) provides optimal heat protection thanks to its Thinsulate lining and specially treated leather with para‑aramid stitching, resistant to 400°C for up to 30 minutes. The removable insole with advanced shock absorption and two PORON XRD zones ensures extra comfort, while the oil- and heat‑resistant nitrile outsole delivers excellent grip. For maximum safety, the shoe is equipped with a JALAS aluminum toe cap and a steel anti‑penetration midsole.
Clearly and easily indicates the status of a gas cylinder. Add the acetylene cylinder identification number to each section and tear off sections during its lifecycle (full, in use, empty). Single-sided tag with a hole for easy cable tie attachment. Space for logo, location, or external partner information. Customizable. Use with a fine-tipped permanent marker for durability. Highly tear-resistant and resistant to some of the most extreme environments. 100% recyclable. Dimension: 80x150mm
These ultra‑light Puma Safety work shoes offer maximum flexibility thanks to the seamless Safety Knit shaft. With a steel toe cap, FAP LITE anti‑perforation protection, breathable BreathActive lining and an evercushion EASY footbed, you’re guaranteed optimal comfort throughout the day. The heat‑resistant (300°C) anti‑slip rubber outsole with shock absorption makes them ideal for any demanding workday. Fully compliant with EN ISO 20345:2022 S1PS ESD HRO SR. Safe, stylish and built for top performance.
This laptop sleeve provides cybersecurity protection for your laptop. The bag is lined with multiple layers of Faraday material, with the inner layer made of diamond ripstop Faraday fabric to prevent abrasion from devices. It features a single Velcro closure with an additional magnetic fastening. The minimalist design ensures discretion. Complies with MIL-STD-188-125-2. Internal dimensions: 26.8 × 41.2 cm.
This cell phone sleeve ensures cybersecurity for your phone. The exterior is made of technical material with a PU coating for light weather resistance. Double-layered patented Faraday material combined with additional shielding fabric for the interface. It closes with a strong Velcro strap that opens silently and discreetly. Internal dimensions: 14x20 cm. Complies with MIL-STD-188-125-2.
Lightweight Hi-Vis Mesh Panel Trousers with strategically placed mesh panels on the back yoke and behind the knee for enhanced breathability and comfort.
Secures mobile phones and other small wireless devices against cyberattacks by shielding mobile phones, WiFi, Bluetooth, and radio s ignals with the ISOTech shielding system in this sleeve. Ensures the protection of personal privacy while using your device in public and private spaces. Internal dimensions: 10.8 × 19 cm. Complies with MIL-STD-188-125-2.
Secures tablets and other small wireless devices against cyberattacks by shielding mobile phones, WiFi, Bluetooth, and radio signals with the ISOTech shielding system in this sleeve. Ensures the protection of personal privacy while using your device in public and private spaces. Internal dimensions: 10.8 × 19 cm. Complies with MIL-STD-188-125-2.
Protects tablets from cyberattacks by mobile phones, Wi-Fi, Bluetooth, and radio signals. Sleek design with stitchless heat-welded seams and a magnetic single-loop closure. Internal dimensions: 21 x 25.6 cm. MIL-STD-188-125-2 compliant.
A large carrying case that can isolate multiple signals simultaneously, protecting sensitive devices such as tablets and smartphones from cyberattacks. The case's discreet design ensures discretion. This case provides signal protection in any location, even near a cell tower. Dimensions: H: 25.5cm x L: 56cm x W: 25.5cm. Weight: 1.8kg Complies with MIL-STD-188-125-2.
Protect 13" laptops and other small wireless devices from cyberattacks via mobile phones, Wi-Fi, Bluetooth, and radio signals with this sleeve's ISOTech shielding system. Maintain personal privacy while using your device in public and private spaces. Internal dimensions: 38.5 x 27 cm. Complies with MIL-STD-188-125-2.
The USB Data Blocker provides devices with immunity from viruses or intrusions when connected to untrusted USB ports. This handy accessory blocks data transfers to prevent information theft. Also features lightning-fast charging capabilities. Il offre également des capacités de charge ultra-rapide.
Robust yet lightweight protection providing a barrier against fine particles and low-level sprays in an extremely breathable white hooded coverall made with the innovative new Tyvek® APX™ fabric.
Five-finger glove in Kermel terry cloth with wool fleece lining, short-term contact with 500°C, long cuff in split leather, Kevlar s titched, length 40 cm.
