BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Lightweight and very comfortable face shield, 450 x 200 mm. With individually adjustable headband and forehead protection. Cellulose acetate visor: scratch and chemical resistant, but is not suitable for use at high temperatures or as protection against high impact. Suitable for: chemical and petrochemical industries.
Extra strong oil absorbing cloths. The perfect solution when durability or tear-resistance is required. Dimensions: 41cm x 51cm. Absorption capacity: 136 litres per 200 cloths.
"Winter bomber jacket with detachable sleeves, SIOPOR® Ultra: 100% polyester fabric with 100% PU coating; ± 195 g/m², multi-functional jacket with detachable sleeves and fleece lining, taped seams on the inside, extended back, Straight collar, foldaway hood in collar Zip closure under flap with touch & close fastening, 1 Patched chest pocket with zip closure, 2 Inset pockets, 1 Phone pocket, sleeve pocket + penpocket(s), 1 Mica pocket, detachable sleeves, elastic at end of sleeves with narrowing by touch & close fastening, elasticated at the sides of the waist, back length 75 cm (L), fixed lining:polyamide in body + quilted sleeves, 1 Inside pocket, zipper in back lining for placing logos, detachable fleece lining in body, 1 Patched pocket. In line with: EN343 3.3., EN 14058"
Earmuff X4 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. New noise reduction pads for better noise reduction, and 'spacers': an extra seal ring which reduces resonance. Despite recent innovations, these earphones have an extra small housing. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3 respiratory and eye protection. SNR: 33dB.
Laces, black in polyester. Length: 125cm. No PPE.
Low shoe S3 in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12: 35-52.
Black Zirnium yarns knitted glove with black nitrile foam coating in the palm. Excellent cut resistance and dexterity and very good grip in oily conditions Sizes: 7-11.
Black powder-free disposable glove made of soft nitrile with extended cuff for extra protection of the wrist and forearm. Fully embossed for a reliable and consistent grip. Silicone and latex free and antistatic. The black color makes it easy to see if the hands have come into contact with potentially dangerous powders. The glove has been tested for phentalyl and stomach acid (vomit), simulating a dangerous overdose from practice. Suitable for use in the food industry. Length: 300mm, palm thickness: 0.14mm, finger thickness: 0.17mm. Sizes: (S) 6.5/7 - (XXL) 10.5/11. Complies with: EN ISO 374-1:2016 Type B: JKPT, EN ISO 374-5:2016 Virus, EN421
High shoe in smooth leather, with a steel antiperforation sole and synthetic 200J toecap. Fitted with a SympaTex membrane. Sole in P U/Nitrile, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Classic fitover glasses with unlimited field of vision. Soft temples (DCT). Fitted with clear polycarbonate lens that provides 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. In line with: EN166/170 2-1.2.
Universal anti-fog visor (1 mm) made of polycarbonate (resistant to high impact and high temperatures). Shape 2: width 450 mm, height 250 mm. For mounting on Lunar and Monteclipso.
Overshoes, CPE, heavy version (90 micron, one size. Available in: blue. Package containing 50 pieces. No PPE.
Proflex knee support with reinforced nylon shell for protection against perforation. The knee support is filled with a gel for better comfort and support. The Proflex is cut resistant, abrasion resistant and has a non-slip surface for better grip on the work surface. Sizes: universal size.
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
Low-cut, black safety shoe in full grain leather with steel toecap and antiperforation midsole, scuffcap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Padded water tongue. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non-slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: 35-49 (D), 37-49 (XD).
ABEK2HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling poin t >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %. S uitable for: processes involving chemical risks. Weight: 370g.
Fire resistant air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter or Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For medium heavy applications. Respiration, face and head protection in one. Weight: 1000g. NPF: 50 with Jupiter, 200 with compressed air, 500 with Versaflo.
Replacement knifes for safety knife Profi 40. Dimesions: length: 71,20mm, width: 18mm, material thickness: 0,50mm. Package: per 10 pieces. No PPE.
Baxter safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti- fog coating.
Functional layer 3 wind- and water repellent softshell jacket. Quilted padded lining. Two breast pockets, left with inner phone pocket. ID-card holder. Two side pockets. Sleeve pocket on left arm. Inner pocket on the left side with handsfree opening. Ventilation zippers under armpits. Extended back. Reflective piping on sleeves and back. Adjustable and detachable hood. Fleece lined collar for better comfort. Adjustable cuffs and waist. Quality: 100% polyester. Available sizes: XS - 4XL. Available colors: Black, white, navy, grey, green, sky blue and red.
Multirisk jack with concealed press stud fastening, 2 inset side pockets with concealed zipper, inner pocket, 1 breast pocket with flap, sleeves with adjustable press studs, reflective tape on shoulders, extended back, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS. Available colors: blue / gray. Available sizes: XS-2XL. in line with: EN 1149, EN 13034, IEC 61482, EN ISO 11611 (front class 2) and EN ISO 11612.
Very durable gloves for all extended tasks in cold conditions. Double nitrile coating on insulating lining.
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin of top quality, Full grain goatskin of top quality, Cat. II, White, yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for assembly work . EN 388:2003, 2111 EN 407:2004, 412X4X
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
Low shoe for women in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Innovative compact folding mask with 7 dynamic parts providing excellent facial movement with maximum comfort. Valved and with inner foam to increase the comfort of the wearer. DOLOMITE optional clogging test. An individual polybag and special flat shape make it easy to store and vending machine ready. Disposable mask FFP3 level, protects against solid and liquid particles of high toxicity. NPF:50.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colou r: black.
Cut resistant glove on seamles knit liner in renewed HXFIBRE (18 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 12.
Cut resistant glove for cold applications. This soft, flexible and breathable glove, with nitrile coating, had as enhanced grip in wet and dry conditions. Highest cut protection (level F) and protection against short contact with temperatures up to 250°C. Soft inside acrylic terry liner in hi-viz orange. Glove can be used in extreme cold applications, cold storage, metal fabrication and general maintenance. EN388: 4X43F / EN407: X2XXXX / EN 511: X10
Helmet attachment system made of plastic, for use with all Fitt All Elect visors. Entirely metal-free, for use in electrical installations.
The Stability insole (sizes D and XD) provides optimum support to the heel and middle foot. It absorbs excessive perspiration moisture and promotes optimal fit due to the lateral foot support. Top layer consists of antibacterial X-Static silver fibre and controls moisture and heat. Excess heat is removed and prevents blistering. Sizes: 39 - 48.
High, brown, welling safety boot in full grain leather with steel toecap, steel sole plate and scuffcap. Leather lining and leather insole. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Outsole in PU/rubber: slip resistant, high wear resistance and optimal heat resistance to 300°C (HRO). Sizes: 37-48.
High shoe in waterresistant synthetic textile (100% leatherfree), with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane semi-orthopedic insole with textile layer. Sizes: 36-48.
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Seemles knitted nylon-spandex gloves (15 gauge) with insulating layer foam nitrile on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Helmet hearing protector Sana 30 for safety helmet CENTURION.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With extra long cuff. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 11.
Jacket, 100% polyester, 150 gr./m², water-repellent finish, 100% thermal polyester filling 300 gr./m², insulating, lined hood, padded collar, two patch pockets with flap, patch breast pocket with flap and ID pocket, zip with storm flap and velcro, tricot cuffs, 1 horizontal reflective stripe on chest and back, water vapor permeability and even at temperatures between 5 ° C and -40 ° C. Available in: navy. Suitable for cold stores and cold stores. Sizes: S - 3XL.
Blue safety glasses, polyamide frame and polycarbonate lenses. Universal size. Suitable for protection against impact.
Black safety boots made from high pressure injected PU, through which a smooth PU surface. Fitted with a 200J steel toecap and steel antiperforation midsole. This boot has an excellent thermal insulation. Extremely comfortable safety boots, also at very low temperatures as the perfect fit provides good closure around the foot and ankle and good arch support. Outsole in PU with abrasion-resistant thermoplastic polyurethane insert processed in the sole. Sizes: 36-49/50 (49/50 double size).
Black sock with grey foot. Excellent moisture control to work in warm conditions. Fitted with an extra heel, toe and shinbone protection, and extra leg and ankle support. Antibacterial. ESD: electrostatic discharge. Made of: 35% cotton, 24% polyamide, 20% polyester (Pro-Cool EcoMade), 14% acryl, 1% Bekinox, 1% Lycra elastane. Available in: anthracite, black. No PPE.
Cobra hybrid safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below, and has an anti-slip temple and branches. Ventilated. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti-fog coating. Protective bag included.
The Stability Pro Plus insole gives extra pronation, extra support on the inside of the foot and has a central footrest (for dropped front foot). This insole gives optimal support to the heel and middle foot. It absorbs excessive perspiration moisture and promotes optimal fit due to lateral support to the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. X-Static is thermodynamic, eliminating excess heat and preventing blistering.
Comfortable half-mask made of silicone rubber, compact form with good fit to the face. Fitted with adjustable head and neck bands for precise adjustment of the mask. With the quick release system it's very easy to don and remove the mask. Half-mask can also be combined with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used.
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Vibram outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-49.
Flame Retardant Hi-Vis Raincoat in PU quality: • Fixed hood with drawstring • Concealed zipper under storm flap with press stud closure • Sleeves with adjustable snap button closure • Two straight pockets. Quality: 50% Polyester, 50% Polyurethane, 210 g/m². Available sizes: XS-5XL. Available colours: Fluo yellow and fluo orange. Complies with: EN 343 3:1, EN ISO 20471 Class 3, EN ISO 14116 and EN 1146-5.
Wind and waterproof jacket with taped seams: • 2-way zip with flap covered with a snap closure • double breast pockets with flap and velcro closure • waterproof zippers • loop for badge holder • side pockets lined with fleece • three large inner pockets • removable and adjustable hood • adjustable sleeves with velcro • adjustable waist • extended back Quality: 100% polyester, 200 g / m² Color: Navy, black and gray. Sizes: XS-4XL.
Intervention helmet with special self-extinguishing paint, with Nomex interior and 3-point chinstrap. Adjustable thanks to the rotary knob, 5 different sizes are available. With Pinlock anti-fog double visor.
Haevy duty backpack in flame retardant fabric to carry the motor unit Adflo and Versaflo R-300, TR-600 and TR-800 comfortlaby on the back.
Goat leather gloves of standard quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver EC (standard quality) and Driver (super quality).
Seamless knitted cotton, No PPE 400gr/12pair
Heat and cold insulating insert sole made of 100% wool. Fits in any shoe and is mainly worn in the winter. Material: 100% wool. Suit able for: general industrial applications.
ABEK2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >6 5 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Only for use with full face masks with sta ndard threads. Class 2 gas filter: for max. concentration of 0.5 %.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
Safety boot in PVC with nitrile non-slip sole. The boot has a steel toe cap in compliance with standard EN 20345. The boot is resistant to hydrocarbons, animal fats and vegetable oils. The Guardian is very flexible and can be used in cold conditions. Sizes: 37-47.
Flame retardant and anti-static hi-vis waistcoat, Stitched seams, Outside: V-neck, Closure with touch and close fastening, Fabric: 100% polyester fabric with 100% FR PU coating +AST; ± 250 g/m².
Foot loop that can be deployed after a fall to remove pressure from the groin and avoid suspension trauma after falling. Not PPE.
The Polar BUFF contains Polartec fleece at the neck for extra warmth. This buff is recommended for use in static work in cold conditions. Quality: 97% Polyester 3% Elastane. Available sizes: Universal. Available colors: Fluo yellow / navy, fluo orange / navy, navy and black.
Comfortable and breathable trousers with ARC protection, soft and supple with good moisture management properties. Not allergenic and harmless to the skin. Reinforced seams for increased durability and longer life. Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g / m². Available colors: corn blue, navy and gray. Available sizes: 48 S - 58 S - 44 R - 64 R - 46 L - 56 L.
Sweatvest Fleece Luxe has a contemporary fitted fit. This product is finished at the bottom and at the end of the sleeves with elastic tape that ensures that the garment fits perfectly around the body. Also, at the bottom of the sleeves a thumb hole is made so you can let your sleeves fit around the palm of your hands. That gives an extra protection against wind and cold. Handy pockets on the outside as well as on the inside of the Sweatvest ensure that you can carry all your essentials with you, such as phone, cards and keys. Fabric: 100% polyester, Microfleece, 280 g / m². Available colors: Red, royal blue, navy, black and gray. Available sizes: XS-7XL.
Constructed using premium HiVisTex Pro tape, this Cotton Comfort t-shirt offers excellent freedom of movement due to its segmented tape design. Lightweight, stylish and breathable. Quality: 55% cotton / 45% polyester. Available sizes: XS-4XL. Available colours: Fluo yellow/black, fluo yellow/navy, fluo orange/black and fluo orange/navy.
Hi-vis ladies' polo for ambulance workers with contrasting collar, cuffs and shoulder pads. Pen pocket on the left sleeve. Segmented reflective tapes. Quality: 60/40 cotton / polyester piqué tricot 180 gr / m². Available colors: fluorescent yellow / enamel blue. Available sizes: XS-3XL. Conforms to: EN ISO 20471 Class 2.
Black safety boot in PVC, fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC. Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Sizes: 35-50.
Refill pack containing 500 pairs of EAR Classic for One Touch dispenser (1031971). EN 352-2 (SNR 28).
Coverall, Tyvek, breathable, resistant to water-based chemicals, back side made of breathable material, antistatic, does not pill, elastichood, elastic at ankles and wrists, Tyvek zip closure with flap.Available in: white.
Polyethylene marker tape to clearly demarcate a danger zone. Delivered in a handy, cardboard carrying box. Width: 8 cm, length: 500 m. Colour: yellow/black.
Low-cut safety shoe, type city model, lightweight and elegant, in high-sheen leather, fitted with a steel toecap and synthetic antip erforation midsole. Liner in leather tanned with natural oils. The shoe meets the ESD requirements and can therefore also be used in work areas where static charge build-up may not exceed 35 ohms. Outsole in rubber: slip resistant, high wear resistance and optimal heat resistance to 220°C. Sizes: 39-48.
