BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Hi-vis coverall Mornant with arc protection: Straight collar; Zip closure under flap with concealed press studs; 2 patched chest pockets with flap; 2 patched slanted pockets with flap; 2 loops for gas detectors; 1 ruler pocket with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 2 side slits; Sleeve narrowing by press studs; Knee pockets; Flame retardant reflective tape. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Fluo orange/navy. Certification: IEC 61482-2 : 2009 class 1 - ATPV 9,4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034: Type 6 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
Corresponding dispenser(s): 1054720 or 1060911.
Flame retardant, antistatic and arc shirt with flat collar, closure with hidden press studs, 2 patch pockets with flap, 1 loop for gas detector, round inset sleeves with narrowing by press studs. Quality: 54% modacrylic + 44% cotton + 2% AST; ± 180 g / m². Available colors: Marine. Available sizes: S-3XL.
The Vaski is a hi-vis ladies rain jacket which also offers a high degree of protection to the wearer. The jacket is made out of a light, but high quality fabric and complies to many international standards such as IEC 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5 and EN 13034. This premium jacket is equipped with a YKK zipper with handy grip for easy opening and closing. The sleeve ends are preshaped and the back is extended for your comfort. Available sizes: XS-2XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Flame retardant work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The pants have increased visibility. Side pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket and concealed key ring for ID card holder. Ruler pocket with flap and reinforced bottom. Height-adjustable knee pockets. Bottom legs adjustable with press studs. Reinforced bottom hem at the back. Quality: Cantex Weld, 365 g/m² Sizes available: 44-64, 146-156, 84-120 SCAND. Available colours: navy/fluo yellow. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
The INUTEQ-DRY® Bodycool Smart X is a high-quality cooling vest based on evaporative cooling. Simple to activate by filling with max. 500ml clean water. The cooling effect can last from 8 hours to up to 3 days, depending on the ambient temperature, humidity and amount of airflow on the body.
Low shoe in microfiber/polyester (made from recycled PET bottles) with synthetic anti-perforation sole with a composite protective toe cap. Equipped with a bamboo and recycled polyester lining that is resistant to abrasion. Sole in PU/PU. Antibacterial Memory Foam sockliner. Sizes: 35-50 Conforms to: EN ISO 20345:2022 S3S CI FO SR.
Flame retardant softshell Umia with arc protection: Straight collar; Zip closure under flap; 1 patched chest pocket with flap; 2 inset pockets; 1 loop for gas detector; 1 loop for badge; 1 Napoleon pocket; Round sleeves; Sleeve narrowing by touch and close fastening. Quality: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-3XL. Available colors: Navy/fluo yellow.
Complete disposable set, for very short work in an environment with asbestos, without direct relation to asbestos dust and without projection of asbestos (maintenance and repairs). It consists of an overall in size XL, a pair of PVC goggles, 1 FFP3 mask, and a pair of green nitrile gloves size 10, 1 waste bag with asbestos marking (90x110cm), a pair of disposable overboots and 1 roll of tape to stick gloves and overboots and thus prevent asbestos from penetrating the suit. WARNING! IN VIEW OF THE STRENGTHENED REGULATIONS OF DECEMBER 2025 REGARDING SIMPLE PROCEDURES AND THE LOWERED ASBESTOS LIMIT, YOU MAY NEED TO USE A FULL-FACE
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. To be combined with half and full-face masks with standard threads or Proflow SC motor unit. Weight: 450 g.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. - Stretch elements - Industrial laundry Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Gray / black. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
Flame retardant long-sleeved polo shirt with roll collar with concealed zip. Extended back. Quality: Merino RX, 200 g / m². Available colors: Black. Available sizes: XXS-4XL. Complies with: EN ISO 11612: A1 + A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5, TRANEMO SKINSAFE, ARC RATING: 5.5 cal / cm².
Lightweight overall with hood, made of SMMS polypropylene, intended for limited use in dry conditions. Combines protection against dirt and non- hazardous substances with high comfort and breathability. Features nylon zipper with flap, external seams and elastic at wrists and ankles.
Hood with ARC protection (APC 2). This rain hood offers protection against heat, flames, liquid chemicals and offers also protection in welding situations. Available sizes: S-3XL. Available colours: Navy.
Flame retardant Hi-Vis work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the work trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The pants have nail pockets. Quality: Cantex Stretch, 365 g/m². Available sizes: 44-64, 146-156, 84-120. Available colours: Fluo yellow/navy. Complies with: EN ISO 11612 A1.A2.B1.C1.F1, EN 61482-2 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²), EN 1149-5 and EN ISO 20471 class 1.
Multinorm fluorescent bib pants with arc flash protection: Flame-retardant treated waterproof cloth; Premium flame retardant reflective striping; Taped seams provide extra protection; FR cotton lining for extra warmth and comfort; Flame retardant buttons and zipper; Adjustable straps with a durable buckle closure; 4 storage pockets. Quality: Modaflame Rain. Available sizes: S-2XL. Available colors: Hi-Vis yellow / Navy and Hi-Vis orange / navy. Conforms to: EN ISO 11612 A1, A2, B1, C1, E3, F1, EN ISO 11611 class 2 A1 + A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 class 2 APC 2, EN ISO 20471 class 3, EN 13034 Type 6 and EN 343 class 3: 1.
Inherently flame retardant safety clothing of the highest quality. covered zipper with covered press-studs, 2 inset side pockets with covered zipper, elasticated sleeves. With this fire retardant fleece vest you can work feeling warm and safe. Quality: 48%/32%/18%/2% modacrylic/cotton/polyester/carbon, 350 gr/m2 Available colors: Black. Available sizes: XS-4XL
Soft and form-retaining Hi-Vis T-Shirt in tricot with a cotton finish on the inside for comfort. T-Shirt short sleeves with heat seal reflection. Quality: 113: 55% polyester / 45% cotton, 200 g/m². Available colours: Fluo yellow/navy and fluorescent orange/navy. Available sizes: XXS-4XL. Complies with: EN ISO 20471 class 1-2.
Flame-retardant and anti-static work jacket 6035 81 with a thin lining. Concealed zip with press studs on the front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Completely metal-free. Quality: Tera TX NON-METAL, 260 g/m². Available sizes: XS-4XL. Available color: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E1 F1, EN 1149-5, EN ISO 11611 klasse 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 8,1 cal/cm², EBT: 8,7 cal/cm².
The Komodo is the hi-vis version of our Jasper ECO jacket. Thanks to the use of the Sio-SafeTM Essential Eco fabric, we have switched to environmentally friendly TencelTM Lyocell and Repreve© recycled polyester instead of the regular cotton and polyester. Although the FR-treated fabric is made with 50% recycled material, the jacket offers the same high-quality protection. It is soft, comfortable and breathable. In addition, this jacket is designed for disassembly, which means that it can be easily taken apart after use. Standards: EN 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5, EN 13034 and EN ISO 20471 class 3. Available sizes: 44R - 64R Available colours: fluo yellow-navy
Multirisk jack with concealed press stud fastening, 2 inset side pockets with concealed zipper, inner pocket, 1 breast pocket with flap, sleeves with adjustable press studs, reflective tape on shoulders, extended back, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS. Available colors: blue / gray, black / gray and gray / yellow. Available sizes: XS-2XL. Conforms to: EN 1149, EN 13034, IEC 61482, EN ISO 11611 and EN ISO 11612.
A low-cut safety shoe with an outdoor-inspired design. With an upper reinforced with technical ripstop fabrics, light and resistant. EVA/hydrocarbon-resistant and non-slip rubber sports sole. Lightweight 200J aluminium toe cap, anti-perforation sole (wide toe cap) in composite, light, flexible, athermic and non-magnetic, ESD. Versatile, the ULTRA is designed for logistics, transport, light industry and construction finishing. • Model that meets the requirements of ESD environments. • It adapts perfectly to dry indoor and outdoor environments.
Overall Industry flame-retardant treated cotton: - Concealed button closure at centre front - Single layer chest pockets with safety fl ap and button closure - Slanted side pockets - Side vents with safety fl ap and button closure, behind side pockets - Kneepad pockets - Adjustable waistband for improved ergonomics and ultimate comfort - Single layer back pocket with safety fl ap and button closure on RHS - Single layer tool pocket on RHS leg Quality: 60% cotton / 39% polyester / 1% AST, 360 g / m². Available sizes: 48-66. Available colors: Navy. Complies with: EN 1149-5, EN ISO 14116, EN ISO 11611 class 1, and ISO 11612 A1B1C1E1F1.
Premium fire blanket specially developed for controlling battery fires. The fire is smothered immediately after the fire blanket is placed over the burning vehicle/battery. In the event of a battery fire, the battery will continue to burn, albeit in a controlled manner, resulting in less smoke and heat production. The Premium blanket can be used multiple times and is equipped with 120cm long loops to easily hoist the blanker over the burning vehicle. Comes in a transport bag. Constant temperature resistance utp to 1000°C (short tem up to 1300°C)
Gaiters, aluminized para-amide, 500gr./m², Velcro closure, no lining,strap under sole, long-term use. Dimensions: length 36cm.
This PCM CoolOver provides a constant cooling temperature of 24°C and reliable protection against heat stress for professionals who need advanced cooling under protective clothing in extreme heat.
The Melfi looks like a simple navy blue sweater with long sleeves, but it protects you against industrial hazards such as arc flash, heat, flame, and flame spread. This sweater with arc protection has a round neckline and elastic hem and wrist bands. Simple but effective. Quality: 55% modacrylic + 43% cotton + 2% AST; ± 300 g/m². Available sizes: S-3XL. Available color: Navy. Complies with: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (17.8 cal / cm²), EN ISO 14116.
Coverall Force+ with concealed press stud fastening, 2 inset side pockets, 2 thigh pockets with flap, 1 breast pocket with flap, 1 back pocket with flap, knee pockets, elastic in back, sleeves with adjustment press studs, reflective tape on shoulders, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS Available sizes: 44-66 Havep. Available colors: Blue / gray. Conform: EN 1149-5, EN 11611 class 1 A1 (front class 2), EN 11612 A1 B1 C1, EN IEC 61482-2 class 1.
SOFTSHELL MENORCA FR/AST Available sizes: S-4XL Available colours: Fluo yellow/black
Fire blanket specially developed for controlling battery fires. The fire is smothered immediately after the fire blanket is placed over the burning vehicle/battery. In the event of a battery fire, the battery will continue to burn, albeit in a controlled manner, resulting in less smoke and heat production. Also suitable for limiting a spontaneous battery fire during charging. Transport bag included. Dimensions: 250x300cm.
Designed to give maximum protection and comfort to the wearer, the Bizweld™ sleeves will provide protection in hazardous conditions. The elasticated cuffs ensure a flexible but comfortable fit. Must be worn with a suitable coverall or jacket/trouser combination. Quality: 100% Cotton, FR Finish. Available sizes: Universal. Available colours: Navy.
Flame retardant polo shirt Telfs with arc flash protection. The polo has flame retardant reflection bands and fluorescent yellow accents. Quality: 54.5% Modacrylic + 44.5% Cotton + 1% AST; ± 220 g / m². Available sizes: S-3XL. Available color: Navy / fluo yellow. Conforms to: IEC 61482-2: 2018 APC1 - EBT 7.4 cal / cm², EN ISO 11612: 2015 / A1 B1 C1 F1, EN ISO 14116: 2015 and EN 1149-5: 2018.
Flame retardant long sleeve polo shirt in modacrylic / cotton / AST (220g / m²). Polo collar with buttons, elastic cuffs, breast pocket. Available sizes: XS-4XL. Available colors: navy. Conforms to: EN ISO 11612 A1B1C1F1, IEC 61482-1-2 Class 1 (EBT: 7.0 cal / cm²), EN 1149-5.
The INUTEQ-H2O® Headcool Bandana will cool your head down rapidly and comfortably. The cooling effect will last from 2 up to 8 hours depending on ambient temperature, airflow and humidity.
Complete disposable kit, for very short work in an environment with asbestos, not directly related to asbestos dust and no projection of asbestos (maintenance and repairs). It consists of 1 coverall, goggles from PVC, a cup mask, a pair of acrylonitrile green gloves, 2 bags of polyethylene marked asbestos, a pair of boot covers, a protective film roll. WARNING! IN VIEW OF THE STRENGTHENED REGULATIONS OF DECEMBER 2025 REGARDING SIMPLE PROCEDURES AND THE LOWERED ASBESTOS LIMIT, YOU MAY NEED TO USE A FULL-FACE MASK WITH A MOTOR UNIT.
Set of 4 cooling packs with a constant temperature of 21 °C. These 100% biobased INUTEQ‑PAC® PCM packs perform reliably under any extreme temperature and at any humidity level. For the Bodycool Pro cooling vest (1052092).
Women's multinorm trousers LESHA with arc protection: Concealed button placket / Zipper fly; 2 inset pockets; 1 patched thigh pocket; 1 stick meter pocket with flap; 1 patch back pocket with flap; elastic waist; knee pockets; Waist with belt loops; Flame retardant reflective stripes (70mm). Quality: Sio-Safe™ Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 gsm. Available sizes: 36-56 ladies. Available colours: Fluo yellow/navy. Complies with: IEC 61482-2 : 2009 class 1- ATPV 15.2 cal/cm², EN ISO 11612 : 2015 / A1A2B1C1E3F1, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034 : 2005 + A1 : 2009 Type PB [6] and EN ISO 20471 : 2013 +A1 2016 / Class 2.
Flame Retardant Coverall bizflame FR51: Protects against radiant, convection and contact heat; Class 2 welding protection; Back pleat for more freedom of movement; Adjustable hem for all leg lengths; adjustable cuffs; UPF 40+ fabric blocks 98% of UV radiation radio loops; 10 storage bags; knee pockets; Concealed zipper. Quality: Bizflame Plus: 99% cotton, 1% carbon fiber 350g/m². Available colors: Navy and Orange. Available sizes: XS-2XL. Complies with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 2 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-1 Elim 8.6 cal/cm² and IEC 61482- 2 IEC 61482-1-2 APC 1 (12 ATPV 13.6 cal cm²).
The ultralight MFT PRO 381 gloves are designed with flexibility and comfort in mind, even during extended wear. The unique microfiber design, weighing only 19 g and with a finger thickness of just 0.84 mm, ensures the 381 offers optimal tactility when working on delicate projects. Sizes: 6-10 Compliant: EN388: 4121X
Multinorm parka with arc protection: Straight collar; YKK zip closure under flap; 1 patched chest pocket; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket; Round sleeves; Flame retardant reflective tape. Quality: 85% FR viscose + 15% para-aramid; ± 125 g/m². Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
The 100% cotton glass workers jacket offers maximum comfort and has an AFLAMMIT® flame retardant treatment. Composition: 100% flame retardant cotton 490g/m². Available sizes: M-2XL. Available colours: Green. Complies with: EN ISO 11612 A / B2 C2 D2 E2 F2.
Flame retardant and anti-static t-shirt FR32: Protects against radiant, convection and contact heat; Moisture-wicking and breathable material; Concealed breast pocket; sleeve pocket; Button closure. Quality: Bizflame Knit Antistatic: 99% Cotton, 1% Carbon Fiber 237g/m². Available colours: Gray and navy. Complies with: EN ISO 11612 A1 + A2, B1, C1, F1, EN 1149 -5 and IEC 61482-2 IEC 61482-1-1 ELIM 13cal/cm².
Fireproof battery bag to safely transport, store and charge the battery of an electric bicycle. If the battery should ignite, the damage will be limited to the bag and the battery. Tested with Li-Ion batteries up to 400W). imensions: 540x130x120 mm
Green boot made out of Acifort. An excellent boot for numerous industrial applications. The shaft has good resistance to fuels, acids and alkalis. the sole is also resistant to oils and fats. Equipped with steel toecap and steel midsole. Antistatic. Sizes: 37-49.
Adhesive tape for masking gloves, boots, and masks on chemical protective clothing, and for additional sealing of zippers. 5 cm x 50 m.
Overall, polypropylene with a microporous film, limited use, microporous film gives for extra protection in damp conditions such as light splashes of few hazardous liquids.
Flame retardant Hi-Vis softshell jacket, very comfortable. Non-metal, wind and water-repellent and with a high arc standard. Ergonomically shaped to work with arms raised. With comfortable heat seal reflection. Concealed zipper front and double storm flap with press buttons. Left breast pocket with flap. Right chest pocket with zipper and loop for telephone cord. Headset holder in the collar. Side pockets with zipper. Left sleeve pocket with flap, concealed key ring and loop for ID pocket. Cuffs on the inside of the sleeves. Tunnel cord bottom of jacket. Quality: Windtech FR 340, 340 g / m², wind and water repellent. Available sizes: XS-4XL. Available colors: Fluo yellow / navy. Compliant with: EN ISO 11612: A1 B1 C1 F1, IEC 61482-2: APC 2, EN 1149-5, EN ISO 11611: CL.2 A1, EN 13034: TYPE PB [6], EN ISO 20471: CL.2 * (XS-S) CL.3 (M-4XL).
Multirisk bib and brace with concealed zip, 2 inset side pockets, chest pocket with flap, 2 back pockets with flap, ruler pocket with flap, thigh pocket with flap, knee pockets, adjustable shoulder straps with elastic, reflective band. The front meets arc class 2. Quality: 80% / 19% / 1% Cat / Poly / AS. Available sizes: 44-66 Havep. Available colors: Black / gray, gray / blue, blue / navy and red / blue. Conform: EN 1149-5, EN ISO 11611 A1A2 cl 1, EN ISO 11612 A1A2B1C1E2F1, EN 13034 and IEC 61482-2.
Short jacket with concealed zip and concealed press studs, 2 front pockets with flaps, 2 inset chest pockets, back pleats for extra freedom of movement, escape mask loop, extra insert at armpits to promote freedom of movement, cuffs with velcro, extended back and reflective tape. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin weave + DWR, 280 gr / m2. Available sizes: 44-66 Havep. Available colors: Black / gray, gray / blue, cornflower blue / navy and gray / red. Conforms to: EN 1149-5, EN 13034, type 6, EN ISO 11611 class 1, EN ISO 11612 A1B1C1E2F1 and IEC 61482-2 (front class 2, rear class 1).
Dust filter protects against all types of particles (highly toxic dust, mist and smoke particles) Can be used in combination with the Sundström motor units SR500/SR500EX/SR700. Cannot be combined with a gas filter.
This PCM CoolOver provides a constant cooling temperature of 29°C and reliable protection against heat stress for professionals who need advanced cooling under protective clothing in extreme heat.
Flame retardant and antistatic poloshirt in 60% Protex®/39% Viloft®/1% AST (180g/m²). Press-stud closure, long sleeves, stitched seams, very soft and moisture regulating properties. Available sizes: S-3XL. Available colours: navy, grey.
Evaporative Hard Hat pad with cooling towel.Advanced PVA material activates easily and quickly when run under water for one minute.Hook and loop closures connect to hard hat suspension system.Conveniently attaches to hard hat suspension headband .Reusable, just re-wet. No PPE.
The Merton rain jacket with fixed hood, two inset pockets and sleeve narrowing by press studs is made from a very supple but highly protective fabric. This flame retardant and anti-static jacket protects you from water penetrating but remains breathable at the same time making this jacket very comfortable to wear. Quality: 100% FR Polyester knitting with FR PU coating + AST; ± 240 g/m². Available sizes: S-3XL. Available colors: Navy.
Flame retardant and antistatic sweater in modacrylic / cotton / antistatic (290g / m²). Round neck, knitted collar and cuffs. This s weater contains reflective (heat seal) stripes and fluorescent accents for improved visibility. Quality: Cantex Terry - 59% modacrylic / 39% cotton / 2% antistatic, 290 g / m². Available sizes: XS-4XL. Available color: navy / fluo yellow. Complies with: EN ISO 11612 A1B1C2F1, EN 1149-5, IEC 61482-2 Class 1 (17.8 cal / cm²), EN 1149-5, EN ISO 20471 class 1.
Soft and comfortable polo shirt with custom reflective transfers, offering excellent stretch properties and breathability. This polo provides UV protection, and the fabric features an anti‑odor effect that reduces bacterial growth and prevents unpleasant odors.
Women's jacket from the HAVEP® 5 safety image+ collection. This jacket meets 6 standards and is made of cotton/polyester/carbon. Quality: 80%/19%/1% cotton/polyester/carbon, 4/1 satin weave + DWR, 280 gr/m2. Available sizes: S-3XL. Available colours: grey/red. Conforms to: EN ISO 11612 A1A2B1C1E2F1, EN 1149-5, IEC 61482-2 APC 1, EN 13034 Type 6, EN 17353 Type B3.
Light hat in 100% polyester (125g/m²) with 5 panels. Preformed panel in recycled PU, adjustable size by velcro, removable label, can be used for embroidery and/or transfer print. Available size: uni. available colours: navy, pink.
Multirisk bib and brace trousers from the Havep Force+ range with concealed zip, 2 inset side pockets, 1 back pocket with flap, 2 thigh pockets with flap, knee pockets, adjustable shoulder straps with elastic. Quality: 79% / 20% / 1% Cotton / Poly / AS. Available sizes: 44-66 Havep. Available colors: Gray / yellow, blue / gray and black / gray. Conform: EN 1149-5, EN 13034, EN ISO 11611, En ISO 11612 and IEC 61482.
Multinorm parka Beltrum with arc protection: Straight collar; YKK zip closure under flap; 1 inset chest pocket with flap; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket; Round sleeves; Sleeve narrowing; Elastic drawstring in front hem; Elongated back tail. Quality: 3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available sizes: S-53XL. Avialable colors: Fluo orange.
A waterproof alternative to the traditional leather rigger. Steel toecap and midsole, fully waterproof, fur lined with side tabs for easy donning. CE certified. Protective steel toecap. Steel midsole. Anti-static footwear. Energy absorbing seat region. 100% Waterproof keeping feet warm and dry. SRC - Slip resistant outsole to prevent slips and trips on ceramic and steel surfaces .Fuel and oil resistant outsol . In line with : EN 13832-2:2006 ASTM F2413-11 EN ISO 20345:2011 S5 (CI)
Flame retardant women's work trousers with stretch for the right fit and increased comfort during work that requires optimal freedom of movement. Quality: Tera TX, 260 gsm. Available sizes: 36-48. Available colours: Navy/fluo yellow. Complies with: EN ISO 11612 A1 B1 C1 F1, EN 1149-5, EN ISO 20471 Class 1, IEC 61482-2 CL.1, ARC RATING: 9.5 cal/cm².
High-visibility vest with reflective bands and various pockets, made from a lightweight and breathable mesh material (100% polyester).
Sleeve, aluminized Kevlar, 500gr./m², knitted cuff, narrowing at bicepwith Velcro, length 40 cm.
Flame retardant, antistatic with ARC protection and at the same time comfortable: the most important assets of the Tiolo. This T-shirt with round neck and long sleeves feels very light. The Tiolo is finished with elastic wrist bands and has good moisture-regulating and antibacterial properties. Quality: 60% Modacryl + 38% cotton + 2% AST; ± 220 g / m². Available sizes: XS-4XL. Available colors: Marine. Complies with: EN ISO 11612 A1B1C1F1, EN 1149-5, EN ISO 14116 and IEC 61482-2: 2009 class 1 - ATPV 5.7 cal / cm². PPE category: 3.
Long sleeve polo shirt 203003: Reflective striping, inherent flame retardant, polo collar, flame retardant, anti-static, piqué, bicolor. Quality: 60% Modacrylic / 39% Cotton / 1% Other, 200 g/m². Available colours: Fluo yellow/navy. Available sizes: XS-5XL Complies with: EN 1149-5:2008, EN ISO 11612:2015, EN ISO 13688, EN ISO 20471:2013 Class 2.
This ready-to-use kit includes a PF-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1235E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger. Compatible with 3M filters DT-Series.
INUTEQ-H2O® Bodycool 2BSafe is an ISO20471 Class 2 evaporative cooling vest with high visibility for maximum safety.
Hi-vis polo with ARC protection: Lay-flat collar; Closure with hidden buttons under flap; Long sleeves; Flame retardant reflective tape. Quality: 54.5% modacrylic + 44.5% cotton + 1% AST; ± 220 g / m². Available sizes: S-4XL. Available colours: Fluo yellow. Compliant with: IEC 61482-2: 2009 class 1 - EBT 7.4 cal / cm², EN ISO 11612: 2008 / A1 B1 C1 F1, EN ISO 14116: 2008, EN ISO 20471: 2013 / Class 3 and EN 1149-5: 2008.
Flame retardant ladies T-Shirt with long sleeves and round neck. Hi-Vis accents on the sleeves. Ribbed cuffs. With heat seal reflection. Available sizes: S-2XL. Available color: navy/fluo yellow. Complies with: EN ISO 11612 A1 B1 C1, EN 1149-5, IEC 61482-2 CL.1, ARC RATING: 5.1 cal/cm².
