BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Cut resistant, seemles knitted nylon-spandex-basalt fibre thread, CFR technology,stainless steel fibre yarn gloves (13 gauge) with insulating layer nitrile foam/aqua PU in the palm with reinforcement between thumb and index. approved for food handling, touch screen compatible, . Heat resistant up to 100°C contact heat. DMF free. Designed for heavy work.Sizes: 6-11.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
The ultralight MFT PRO 381 gloves are designed with flexibility and comfort in mind, even during extended wear. The unique microfiber design, weighing only 19 g and with a finger thickness of just 0.84 mm, ensures the 381 offers optimal tactility when working on delicate projects. Sizes: 6-10 Compliant: EN388: 4121X
Protective overglove made of flame-resistant premium goatskin leather for electrical insulating gloves. Enhanced protection without compromising dexterity. For use with Class 00 ULW and Class 0 APC2 electrical gloves. Length: 255 mm Sizes: 7–12 Compliant with: EN388:2X21X
Seamless knitted glove (15 gg) with enhanced grip for wet and oily conditions, offering excellent dexterity and sensitivity. Featuring XLNT nitrile technology, food-grade, soft feel and a snug fit, with a tight and flexible cuff. Free of DMF, silicone, and natural latex. Oeko-Tex Standard 100. This FA (Food Adjusted) version is unprinted. Sizes: 6-11, Conforms to: EN388:2016 4.1.2.1.X, EN407: X.1.X.X.X.
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
Made of graphene fibers, without stainless steel or fiberglass, with unique heat regulation. Odor neutralization and bacteriostatic properties make the arm protector smell fresh and kill harmful bacteria.
Premium full-grain goatskin leather glove with winter lining for warmth and durability. Features 150g Thinsulate™ insulation for unparalleled comfort. The lining features individual finger cuffs for an optimal fit. The waterproof design keeps hands dry, and the specially designed thumb provides increased flexibility. Reflective detailing enhances visibility in low light. Sizes: 7-12. Conforms to: EN388: 2121X EN511: 321
Cut resistant gloves with Kevlar® liner in combination with roughened latex coating offer good grip and optimal protection against cutting injuries in both dry and damp environments. Sizes: S / M / L / XL. Available in: blue.
Dexterous cut resistant glove with highest cut level F, suitable for precision work. Ultra light thanks to 18 gg knitted with CRF® Omni cut resistant technology. Palm dipped with super soft nitrile foam that provides excellent grip on dry surfaces. Reinforced thumb crotch for improved longevity. Breathable materials for all day comfort. Wide range of sizes means a perfectly fitting glove for everyone. Skin friendly with Derma-test and Oeko-Tex certificate. CAT II . In line with : EN 407:2004 X1XXXX - EN 388:2016 4X43F - EN 420:2003+A1:2009
Sterile cut resistant glove. Dyneema Diamond yarn. Sterility Assurance: These two-glove liners also have a Sterility Assurance Level (SAL) of 10-6 , for a lower risk of contamination. The BioClean™ cut resistant liner S-BCRL is specifically designed to be worn between two cleanroom gloves. Class 10/ISO Class 4 & EU GMP Grade A/B and other sterile cleanroom heavy duty applications for extraction and maintenance with a risk of cuts and bruises. Sizes: XS-XL. Conforms to: EN388:2016: 3.X.4.X.B
Overglove light voltage in premium goat skin leather for insulated rubber gloves of class 0 & 00. Offers mechanical protection and extends the life of rubber insulated gloves. Lenght: 24-27 cm. Sizes: 7-12. ATTENTION : order these gloves in a size larger than your normal glove size.
Glove with excellent grip in oily environments, preventing slippage and injuries. Triple-coated with nitrile foam in the palm, for a solid oil barrier. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.3.C, EN407:2020: X.1.X.X.X.X
Cut-resistant gloves with Hagane coil liner in combination with the nitrile foam coating on the palm provide a good grip and optimum protection against cutting wounds in both dry and humid environments. Sizes: 6-10.
Loggers working gloves with mechanical resistance in 100% goat leather with nylon and spandex inserts in red color. They provide great dexterity and grip. They have a perfect fit, and impact and vibration foams in the palm of the hand. Sizes: 8-12.
Textile glove, Cold insulation gloves, 7 gg, acrylic, for allround work: Fishing, hunting, shop work. CAT I . In line with : EN 420:2003+A1:2009, EU Regulation 2016/425.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a liquid-tight palm and an airy top. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Solution for users looking for a glove that keeps hands warm and dry, protects them from contact heat, and offers high protection against cuts.
Thin 18‑gauge cut‑resistant glove with nitrile coating. Touchscreen compatible and food approved. Sizes: 6–11 Complies with: EN 388: 4X31B – EN 407: X1XXXX
Carrier: Nylon / Dyneema® with roughened nitrile coating. Nylon inner glove for better comfort. Waterproof. Protection up to 500BAR. Sizes: 9 and 11. In line with EN388: 4.5.4.4
5-finger gloves, palm and back in water and oil repellent cowsplit leather, inner lining of reinforced TEKINOX. Sizes: 11. Application: tasks with extreme risk of cutting, heavy industrial activities. Standards: EN388:2016 4.X.4.4.F, EN407: X.1.X.X.X.X
Cut and heat resistant arm protector 60 cm., with thumb opening and velcro.Ergonomic design. Protects during 21 seconds against 100°C contact heat (test report).
Antivibration protection for building and construction applications. Synthetic glove with premium PU in the palm. Damping foam for excellent anti vibration performances. Ventilation between the fingers. Exellent fit and preformed hand shape. Sizes: 7-12.
Top quality welding glove made of black analyne leather on palm and back and lined cuff of 15cm in super split leather for even better heat resistance. This glove is super comfortable and has a good dexterity. The palm is extra reinforced, which increases the durability of the glove. With kevlar seams.Glove can be used for MIG/MAG and electrode welding. Available color: black/gold Available sizes: 10, 11
This glove offers excellent grip in dry, wet and slightly oily environments. Coated knuckles and triple nitrile foam palm coating for a solid oil barrier. Lining with 18 gg knitting technology and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 4.1.1.1.X - EN 407:2020: X.1.X.X.X.X
Seamless knitted nylon glove with white PU coated fingertips. For microelectronics, packaging, archiving and precision work. Sizes: 6, 7, 8, 9.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 30,5 cm.
Extreme comfort and protection in high cut risk applications for increased compliance and an uninterrupted workday. The Intercept™ Cut resistant Technology provides high levels of protection against lacerations. Lightest weight design for comfort and dexterity, su pporting worker use compliance. High abrasion resistance delivers longer product use life. Suitable for use across a wide range of applications and risks, avoiding the need to change gloves when transitioning between tasks. Intermittent handling of hot work items up to 100°C. Latex and Silicone free. Sizes: 6-11.
Heavyweihgt working glove in piggrain leather, collar model, specially-sewn thumb, cotton back and cuff. Extra small end extra large sizes : 4, 7-13.
Seamless knitted polyamide/elastane grey glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 25 seconds). Suitable for handling, and precisionwork in dry and oily conditions. Sizes: 7-11.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for extra wide arms. Lenght 40 cm.
Gloves with high cut resistance and PU coating. 18 gauge. Very thin knit, 0.7 mm. Touchscreen. Reinforced thumb cavity. Sizes 6-12. Complies with: EN388:2016: 3X43F
18 gauge knitted glove made of HPPE, polyamide and Spandex fibres. Nano foam nitrile coating on palm and 3/4 back. Protection against impact on back and fingers. Touchscreen. Sizes: 7 to 11. Conforms to: EN388:2016: 3.X.4.2.D.P
Glove with excellent grip in oily environments, preventing slippage and injuries. Coated knuckles and triple nitrile foam palm coating for a solid oil barrier. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.2.C, EN407:2020: X.1.X.X.X.X
Glove with high cut protection (51N) and latex coating for excellent grip. Leaves no marks on surfaces. Sizes: 7-11 Compliant with EN 388 3X43F, EN407:X2XXXX
Highly cut-resistant glove in very fine knit, 0.85 mm. 18 gauge. Soft nitrile coating. Touchscreen on all fingers. Reinforced thumb cavity. Sizes: 6-12 Complies with EN388: 4X43F
Durable un-lined glove in synthetic leather with great dexterity and a good grip. The pre-shaped fit makes the glove comfortable and flexible, an elastic at wrist and a half-length cuff to ensure that the glove stays firmly in place. Sizes: 6-13.
Goat leather combat glove combined with heat resistant materials from Nomex / Kevlar intended for special operations for intervention services and riot police. Knuckle protection, palm grip, thumb protection, closure with Velcro. Sizes: 8-11. In line with EN388: 3.2.3.2, EN407: 4.1.X.X.X.X
The micropore nitrile palm coating is designed to deliver excellent grip, in both dry and oily conditions. With 360 degrees breathability, hands will be comfortable and free from irritation. EN388: 2016 level E cut resistance Rhino Yarn™ cut resistant technology; EN388: 2016 4 × 4 3 E; Fine 15 gauge lightweight liner; Increased abrasion resistance to level 4 for 2021; High level of tactility and dexterity; Approved for food contact to EU Regulation 10/2011; Touch screen compatible; Breathable liner and palm coating; New micropore nitrile palm delivers good dry and oil grip; Antistatic to EN1149-5: 2008.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for narrow arms. with thumb hole Lenght 30 ,5 cm.
A very thin and flexible nitrile-dipped ESD glove for ESD-protected work areas where maximum dexterity is needed. The glove has touchscreen functionality, ensuring seamless transition between duties without having to remove the glove. Thin 18 gg fibre and highly breathable to ensure all-day comfort. CAT II . In line with : EN ISO 21420:2020 - EN 407:2020 X 1 X X X X - EN 16350:2014 R <(><<)> 1,0 x 10⁸ Ω - EN 388:2016+A1:2018 4 1 1 0 X - IEC 61340-5-1:2016 R <(><<)> 1.0 x 10⁹ Ω
Soft and versatile glove with cut protection (level C/ANSI cut A3), made from recycled polyester and bio-based Dyneema® fibers - an innovation that limits dependence on fossil raw materials. Good for the environment! 13 gg knitting technique with touchscreen function - use your smartphone with gloves on. Less water consumption due to the new nitrile foam coating. Sizes: 6-11. Conforms to: EN 388:2016: 4.X.4.2.C and EN 407:2020: X.1.X.X.X.X.
HPPE glove, gauge 18. Nitrile foam coating on palm and fingertips. Wrist with elastic tightening. Ideal for precision work. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.2.1.B
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 305 mm.
Versatile tactical winter glove designed to enable weapon operation and precise frisking. Slim all-round fit and exceptional dexterity. Windproof and water-repellent durable softshell fabric with fleece liner, TPR reinforcements, touchscreen compatible.
Glove with very high cut protection, suitable for handling very sharp parts in the glass and metal industry.
Very soft, durable assembly glove made from recycled polyester. One pair is equal to a 0.5l PET bottle. The glove is 15 gg knit, contains spandex and has a new nitrile foam coating that uses less water in production. Touchscreen function - operate your smartphone with gloves on.. In line with : EN 388:2016+A1:2018 4121X - EN 407:2020:X1XXXX
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Nitrile coating on the palm with sand grain finish for extra grip. Fleece lining for extra warmth in cold temperatures. Reinforced thumb hole to reinforce high-wear areas. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.F.P
This glove combines 3 important elements needed for handling ropes: dexterity, high abrasion resistance, and good grip.
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass
High-quality welding and heat protection sleeve with elastic upper part and additional hook-and-loop fastening for a secure fit. The soft, pre-shaped textile makes the sleeve highly flexible and ensures a comfortable fit around the arm. The sleeve provides excellent protection against ambient heat and is certified for contact heat level 2 (250 °C). Suitable as a versatile sleeve for TIG, MIG and MAG welding. Suitable for both right and left arm. Sizes: M to XL Complies with: EN388: 2222X – EN407: 423234
Knitted glove made of HPPE and cobalt (without fiberglass), 13 gauge. Double RGO GRIP coating (nitrile + microfoam-nitrile) on the palm and three-quarters of the back. Elasticated wrist. Touchscreen. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D, EN407:2004: X.1.X.X.X.X
This glove offers excellent grip in dry, damp and slightly oily environments. The single nitrile foam coating in the palm makes the glove comfortable, yet grippy. Lining with 18 gg knitting technology and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 3.1.1.X - EN 407:2020: X.1.X.X.X.X
Winter glove, outer layer in polyester, 13 gauge. Waterproof membrane. Polyacrylic lining. Nitrile foam coating. Touchscreen. Oekotex certified. Sizes: 7 to 11 Conform: EN388:2016: 3.X.2.1.C EN511: 1.2.1
Very flexible lightweight glove in Dyneema. Hyflex offers excellent cutting resistance. The white outer coating in polyurethane protects the dyneema fibre (and thus the hand) during abrasive activities. This glove with great sensitivity will last and last. Recommended for manipulating materials and tools with sharp edges, e.g. in the automotive industry or in the production of durable goods. Sizes: 6-10.
Seamless knitted aramid and steel wire glove, fitted with a palm and finger coating in natural rubber. Excellent cutting resistance and good grip due to rough finish. Sizes 7, 8, 9 and 10.
A general purpose safety glove made of 13gge HPPE fibers with black PU coating on the palm. Guarantees all-day comfort. Suitable for fine work with limited cutting risk. Sizes: 6-11. Complies with: EN388:2016 4.X.4.2.B
Vibrothan® foam technology for optimal vibration dampening protection. Excellent durability and grip performance due to Microthan® synthetic leather. Vibration reducing according to EN ISO 10819, Reinforced index finger and little finger, Reinforced seams, Reinforced fingertips, Padded palm, Pre-bent fingers, Specially designed thumb, Ergonomically shaped, Specially designed details. Sizes: 7-12 EN388:2016 2.2.2.2.X
Impact glove with new and unique KOROYD impact protection technology. An optimized PU elastomer absorbs and distributes the impact energy through its unique construction, reducing the load on critical parts of the hand. Advanced and increased impact protection: ANSI/ISEA level 3. Extremely suitable for heavy environments. 18 gauge, Nitrile-PU foam coating. Reinforced thumb attachment. Touchscreen. Sizes: 7-12. Conforms to: EN388:2016: 4.X.4.3.F.P
Cow grain leather glove with cotton back, semi-lined. Sizes: 8-11.
Seemles knitted nylon-spandex gloves (18 gauge) with insulating double layer nitrile foam on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Seemles knitted nylon-spandex gloves (18 gauge) with 3/4 insulating double layer nitrile foam on the palm. Heat resistant up to 100°C contact heat. Sizes: 7-11.
