BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Dust filter protects against all types of particles (highly toxic dust, mist and smoke particles) Can be used in combination with the Sundström half and full face masks and motor units SR500/SR700. It's easy to combine this filter with gaz filters of this range. Clogging of the filter can only be detected through an increase of the (breathing) resistance.
Pre-filter for Sundström filters, if you change the pre-filter dayly, the life span of the P-filter wil be extended up to 10 times.
Complete kit with SR 500 fan unit and protective helmet SR 570, 1 protective film, standard battery, battery charger SR513, belt SR508, 2 pieces of SR510 P3 particle filters, 2 filter adapters, 10 prefilters SR221, 2 prefilter holder, flow meter, plug kit, cleaning tissue and user instructions. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Harness to carry fan units SR500/SR700 on the back. No PPE.
SR500 motorunit to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Not for confined spaces. Flow rate: min. 175 or 240 L/min. Included: battery, battery charger, belt, 2x P filters, 2x filter adapters, 2x pre-filter holders, 10 prefilters, flow meter, user instructions, cleaning wipe, plug kit.Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
Put togehter with pre filter SR221 on gas, particle, or combined filter. Use also for fit test.
The SR 200 full face mask is made of silicone and is produced in one size that will fit most face sizes. The mask is equipped with three inhalation valves and two exhalation valves, and the breathing resistance is therefore very low. The exhalation valve covers with baffles effectively protect the valves and membranes against dust and paint mist. The design and location of the exhalation valves improve the scope available for communicating. The material and pigments of the mask body are FDA- and BGA approved for exposure to provisions, which minimizes the risk of contact allergies. The easily adjustable elastic head harness of the mask is secured to the visor frame and to the exhalation valves which, together with a large crown plate, contributes towards a comfortable and secure fit. The spherical visor of the mask is made of scratch-resistant polycarbonate, which provides a large field of vision. The mask can be used either as a filtering device in combination with filters from the Sundström range of filters, or as breathing apparatus with a continuous air flow together with the SR 307 compressed air attachment. The SR 200 can also be used as head top together with th e Sundström fan unit SR 500 or SR 700. Holder for pre-filter is included. The SR 200 full face masks together with the SR 500 EX fan are approved for use in a potentially explosive atmosphere. Best stored in box SR 344 alternatively storage case SR 339-1 or SR 339-2.
The SR 900 half mask is made of thermoplastic elastomer (TPE) and polypropylene (PP) in three sizes, S, M and L. The mask is equipped with two exhalation valves, which ensures very low exhalation resistance. The valve covers with partitions effectively protect the exhalation membrane against dust and paint mist. The material and pigment of the mask body are approved by FDA for foods, which minimizes the risk of contact allergies. The easily adjustable elastic head harness straps of the mask are designed as a V-shaped loop and have a large dished crown plate, which contributes towards a comfortable and safe fit. The half mask SR 900 is used in combination with: • Filters from the Sundström range. • Remote filter holder SR 905 according EN 12083. • The SR 307 or SR 507 compressed air attachmnet which then serves as a breathing apparatus with continuous flow for connection to a compressed air supply according EN 14594:2005. • The fan unit SR 500/SR 700 and approved filters included in the Sundström fanassisted respiratory protective device s ystem conforming to EN 12942:1998. A pre-filter holder is supplied. Best stored in box SR 230 or storage case SR 339.
Air hood in the form of safety hood with PC visor. Air channel leads to the visor to prevent it from fogging. Can be used in combination with the Sundstörm motorunits SR500/SR700. Visor easy to fold up and air hose is replaceble. For work with a risk of mechanical impact. Weight: 700 g. NPF: 500.
The SR 100 half mask is made of silicone in three sizes, i.e. S/M, M/L and L/XL. The mask is equipped with two exhalation valves, which ensures very low exhalation resistance. The valve covers with partitions effectively protect the exhalation membrane against dust and paint mist. The material and pigment of the mask body are approved by FDA and BGA for foods, which minimizes the risk of contact allergies. The easily adjustable elastic head harness straps of the mask are designed as a V-shaped loop and have a large dished crown plate, which contributes towards a comfortable and safe fit. The mask is used either as a filtering device in combination with filters from the Sundström range, or in combination with the SR 307 compressed air attachment which then serves as a breathing apparatus with continuous flow for connection to a compressed air supply. A pre-filter holder is supplied. Best stored in box SR 230 or storage case SR 339. Sizes: S/M, M/L, L/XL.
The Combined filter SR 599 is intended for use in the SR 500/SR 500 EX fan. The filter is of type A1BE2K1‑Hg-P3 R and provides protection against the following types of gases and vapours: Type A protects against organic gases and vapours, such as solvents, with boiling points > +65 °C. Type B protects against inorganic gases and vapours, such as chlorine, hydrogen sulphide and hydrogen cyanide. Type E protects against acidic gases and vapours, such as sulphur dioxide and hydrogen fluoride. Type K protects against ammonia and certain amines, such as ethylene diamine. Type Hg protects against mercury vapour. Warning. Maximum use time 50 hours. Type P3 R* protects against all types of particulate pollutants, e.g. dust, mist and smoke. *R (Re-useable): The filter is intended to be used for more than a single shift.
Gas filter ABE1 for use with Sundström face masks , protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic, acidic gasses, vapours and ammonium.
For use together with Sundström compressed air filtration system. Type A protects against oils, organic gases and vapours, such as solvents, with boiling points > +65 °C. Type P3 protects against all types of particulate pollutants, e.g. dust, mist and smoke.
Kit with SR 500 fan unit and face shield SR 570 with bump cap, 1 pc protective film, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 pre-filter, 2 pcs pre-filter holder, flow meter, plug kit, cleaning wipe and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Intrinsially safe motorunit specially designed to be used in potential explosive atmospher, to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Comes with: motorunit, battery, charger ,belt, filter adaptors for P3 filters, set P3 filters, 10 pre filters, filter cover caps, tube vaseline, and flow meter.Not for confined spaces. Flow rate: min. 175 or 225 L/min. .Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
Filter adapter for fan unit SR500.
Gas filter A2 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C. To use with half and full face Sundstrom masks.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. The unit consists of a regulator, pre-collector and main filter (SR 292), all of which are mounted in an enclosing steel sheet stand. The unit can be placed on the floor or mounted on a wall. The pre-separator has automatic drainage, separates coarser particles, water and oil. The SR 292 main filter consists of a carbon filter part (500g) , surrounded by two P3 particulate filters. The air is cleaned to remove any remaining particles/gases/vapours/odours. A Y coupling that increases the number of outlets is available as accessory. A maximum of 3 people can be connected.
Dust filter protects against all types of particles (highly toxic dust, mist and smoke particles) Can be used in combination with the Sundström motor units SR500/SR500EX/SR700. Cannot be combined with a gas filter.
Pre filter holder for fan unit SR500 EX.
Oil and chemical resistant compressed air hose with a diameter of 10/16mm made of polyester reinforced with PVC, fitted with safety couplings CEJN 342. For use with the SR99-1 filter unit.
Industrial Air hood with safety helmet SR 575 to be combined with motor unit SR 500/ SR 500 EX or SR 700, and with SR 507 for use with compressed air.Transparent visor in PC. Air channel leads to the visor to avoid fogging of the visor. Lightweight construction with low centre of gravity ensures a balanced and ergonomic fit. Adjustable head harness ensures secure and personalised fit.A wide range of accessories makes the helmet suitable for different applications.
Complete kit with SR 500 fan unit and protective helmet SR 575 with polycarbonate visor. Contains, SR 500 fan unit, SR 580 helmet, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: 500.
Complete kit with SR 500 fan unit and protective helmet SR 580 with polycarbonate visor. Contains, SR 500 fan unit, SR 580 helmet, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: 500.
Output for 2 persons / compressed air hoses to be installed on Sundström filter system.
Harness to carry fan units SR500 EX on the back. No PPE.
Kit with SR 500 EX fan unit and face shield SR 570 with triacetate (TAC) visor. Contains, SR 500 EX fan unit, SR 570 face shield, battery SR 502 EX, battery charger EX, PVC belt, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 pre-filter, 2 pcs pre-filter holder, flow meter, plug kit, cleaning wipe and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Combination filter class 1 for use with Sundström half and full face masks. Provides protection against organic gases and vapors, with boiling point > +65 °C, inorganic gases and vapors, acid gases and vapors such as sulfur dioxide and hydrogen fluoride, ammonia and ammonia vapours, mercury vapors and dust particles, fog and smoke.
Kit with SR 700 fan unit and full face mask SR 200. Contains, SR 700 fan unit with PVC belt, SR 200 full face mask with polycarbonate visor and rubber head harness, breathing SR 550 PU hose, standard battery 2.25Ah, battery charger SR 513, flowmeter, 2pcs particle filter SR 710, 1pc particle filter adapter SR 611, SR 367 sealing cover, flowmeter, plugkit, cleaning tissue and user manuals. Packed in a plastic storage box.
Gas filter ABE1 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
Kit with SR 500 EX fan unit and protective helmet SR 580. Contains, SR 500 EX fan unit, SR 580 protective helmet, battery SR 501 EX, battery charger SR 513 EX, belt SR 508 EX, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 pre-filter, 2 pcs pre-filter holder, flow meter, plug kit, cleaning wipe and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Gas filter AX protects against orgnaic gases and vapours such as solvents with a boiling point lower than +65°C. To use with half and full face Sundstrom masks.
Breathing hose tested and approved together with remote filter holder SR905, fan unit SR500/SR700, intended for use with half face mask SR900.
Air regulator suitable for working in ATEX environments, mounted on a belt and equipped with flow meter and warning whistle. Regulator provides continuous air flow and serves as a connection between the Sundström air hoods and the compressed air hose.
Filter holder including strap to carry the filters of the half mask on the back, making the mask more compact and can be worn, for example, under a face shield.
PVC belt for remote filter holder (1058602).
Breathing twin hose tested and approved together with remote filter holder SR905, fan unit SR500/SR700, intended for use with half face mask SR900.
Intrinsically safe (Ex-proof) Li-ion battery 18V,3.0 Ah for SR 500 EX motor unit.
Gas filter A1 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C. Can be used in combination with the Sundström half and full face masks.
Gas filter ABE2 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
Complete kit contains, SR 500 fan unit, SR601 hood, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Complete chemical resistant air hose with couplings for use with SR500, SR500 EX and SR700 motor units, and full mask SR200.
Complete motor unit kit consisting of SR500 motor unit, SR570 (bump) air hood and passive welding filter SR574 with welding shade 10, standard battery, battery charger SR713, leather belt SR503, protective cover for air hose SR59021, 2 x P3 filters SR510, 10x prefilters SR221, 2 prefilter holder, 2 spark arresters SR336, 2 filter adapters, flow meter, plug kit, and cleaning cloth. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Antistatic and heat resistant compressed air hose with a diameter of 9.5/19mm made of polyester reinforced with EPDM, fitted with safety couplings CEJN 342. For use with the SR99-1 filter unit.
The Sundström SR 200 Airline is a breathing apparatus that is supplied with a continuous flow of air and is designed for connection to a compressed air supply. The unique feature of the SR 200 Airline is the scope it provides for filter back up. The breathing hose can be released from both the facepiece and the control valve. The equipment can then be used as a filtering device. The SR 200 Airline can be used as an alternative to filtering devices in all situations in which the latter are recommended. This applies especially if the user is doing hard or sustained work, and if the pollutants have poor warning properties or are particularly toxic. The SR 200 Airline is made of materials that are not liable to give rise to sparking when subjected to friction, which enables the device to be used in an explosive or fire-hazardous environment. Control valve, flow meter and warning whistle for temporary and continuous monitoring of the air flow are included.
To be installed on Sundström filter system.
Filter holder.
Motor unit can only be combined with dust filters SR510 or SR710 (P3 filters) and air hoods and half and full face masks from Sundström. Flow rate: 175 or 225 L/min. Equipped with visual and audible alarm in case of dust filter saturation or low battery. Includes: motor unit, belt, charger, battery,2 filteradapters, 2x P3 filters, 2 pre-filter holders, 10 pre-filters, flow meter. Battery charging time: 0-80% capacity in 30min. battery autonomy depending on filter and set air flow 4-7 hours. NPF: depending on the cap used.
Standard Lithium-Ion battery for SR700 motor unit, 14,8V 2,25Ah. Battery charging time: 0-80% capacity in 30min, battery autonomy d epending on filter and set air flow: 4-7h.
EX battery charger for the fan unit SR 500 EX. No PPE.
Gas filter k1 protects against ammonia, and certain amines, such as ethylen diamine. To use with half and full face Sundstrom masks.
Gas filter k2 protects against ammonia, and certain amines, such as ethylen diamine. To use with half and full face Sundstrom masks.
Complete kit contains, SR 500 fan unit, SR602 hood, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Complete anti-static air hose with couplings for use with SR500, SR500 EX and SR700 motor units, and full mask SR200.
Spectacle kit to support pescriiption lenses, the position of the holder can be adjusted vertically as well as in depth.
Complete motor unit kit consisting of SR500 motor unit, SR575 (safety helmet) air hood and passive welding filter SR574 with welding shade 10, standard battery, battery charger SR713, leather belt SR503, protective cover for air hose SR59021, 2 x P3 filters SR510, 10x prefilters SR221, 2 prefilter holder, 2 spark arresters SR336, 2 filter adapters, flow meter, plug kit, and cleaning cloth. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
EX battery charger for the atex battery SR502 (1061168) to be used with motor unit SR 500 EX.
