BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Coverall, 65 gr/m² , microporous film laminate, lightweight, hood, elastic waist wrists and ankles, 3 thread over loch stitch.
Flame retardant and anti-static fleece. Quality: 60% modacrylic, 38% cotton, 2% AST, 280 gr / m². Available sizes: S-4XL. Available colors: Royal blue and navy. Complies with: EN ISO 14116 index 3, EN ISO 11612 A1.B1.C1., EN 1149-5.
Belt, 42% modacryl/cotton 58% polyester, elastic, width 38mm. Available lengths: 90-130 cm. Color: black.
With the Druten sweater you will feel comfortable even in hazardous working situations as it provides protection against the risks of electrical flashover, against heat and flame, flamespread and static electricity. This navy sweater is finished with a small stripe segmented reflective tape and 2 side pockets with zip closure. Quality: 55% modacrylic + 43% cotton + 2% AST; ± 300 g/m². Available sizes: S-3XL. Available color: Navy. Complies with: IEC 61482-2 : 2018 APC1 - ATPV 14,8 cal/cm², EN ISO 11612 : 2015 / A1 B1 C1 F1, EN ISO 14116 : 2015 / IND.3 and EN 1149-5 : 2018.
Coverall, double polymer coated, extra layer of chemical resistant film, 100% particle tight, resistant to splashes of hazardous liquids (up to 5 bar), fixed hood with elastic, stitched and sealed seams, elastic at wrists and ankles and waist, zip with double flap and adhesive, thumb loops. Available in: orange, gray.
Coverall, 50gr./m² polyester viscose rayon mix, firming nylon film on the inside, non-woven, flame retardant, limited use, to wear above heat- insulating clothing, 3-thread overlock seams, offers protection against hazardous dust and dirt. Available in: Blue.
Jacket, Guardian H²O polyester, 260 gr/m², zipper under flap, lined, hood also available. Concealed zipper and velcro closure at centre front, chest pockets with safety flaps and velcro closure, inside pocket at left hand side, goggle pocket behind storm flap, lower pockets with safety flap, lower side entry pockets with blind zipper closure, adjustable velcro closure at cuffs, adjustable puller at hem, fully taped seams, reflective striping.
Coverall, non-woven, limited use, flame retardant, chemical resistant coating, antistatic, hood with elastic, double zip closure withdouble flap, elastic at wrists and ankles. Available in: grey, orange.Suitable for: MultiRISK applications in chemical and petrochemical companies, refineries, tank cleaning. Sizes: S-XXXL. EN14605 type 3 & type 4, EN 1149-3, EN ISO 14116 index 1
Flame retardant, anti-static T-shirt with long sleeves, Very soft handle, Comfortable, Good moisture regulating properties, lightweight, Inherent flame retardant & anti-static, Outside: Long sleeves, Elasticated wristband, Fabric: 60% Protex® - 39% Viloft® - 1% AST (Jersey); ± 175 g/m². in line with: EN14116 index 3, EN 1149-5.
"Parka, Gore Tex Pyrad TM Fabric Technology, 2-layer laminated in polyester, waterproof, windproof, breathable (WWB). This parka combinest this WWB principle with the highest protection against heat and flame. Permanently anti-static technology. Industrial laundry at 60°C. Available sizes: S-4XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Buff flame retardant and antistatic in 87% Nomex®, 5% Kevlar®, 4% elasthane, 4% carbon fibre. Keeps bodytemperature in cold environments. Protects against heat, flames and static electricity. Dimensions: 24,5 cm x 54 cm. Available colours: navy, red, green, beige.
Coverall, laminated, for limited chemical use, composed of various composite layers, including the highly protective EVOH layer. Protects against hazardous chemicals in spray and liquid form. Grey version has stitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, reinforcement on the knees.
Flame retardant anti-static long sleeve sweatshirt, modaflame knit, 300 gr/m².
Hooded coverall with elastic face opening and chin flap for tight fit around respirator, stitched and over-taped seams, double self-adhesive zipper flap, double zipper and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle tight fabric, excellent barrier against a broad range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Antistatic treatment (inside).
Coverall flame retardant and antistatic, 80% cotton 19% polyester 1% anti-static yarn, satin binding, 280gr./m², 2 chestpockets with flap, 2 patched side pockets, 1 meterpocket with flap, 1 back pocket with flap, elasticated back waist, hidden closure, retro-reflective bands. Available in: navy, orange, red, charcoal and black.
Flame retardant, anti-static long john, Very soft handle, Comfortable, Good moisture regulating properties, Lightweight, Inherent flame retardant & anti-static, Outside: Front fly, Ribbed ankles for extra comfort, Fabric: 60% Protex® - 39% Viloft® - 1% AST (Jersey); ± 175 g/m². in line with: EN14116 index 3, EN 1149-5.
The Sweater Mulitnorm from the Tricorp Safety collection is made of 60% modacrylic, 39% combed cotton and 1% carbon with a canvas weight of 280 gr / m2. This product is EN ISO 11612 (heat and flame protection) and EN 1149 (protection against electrostatic properties) certified. Quality: 60% Modacryl / 40% Combed cotton, 280 g / m². Available sizes: XS-7XL. Available colors: Marine. Conforms to: EN ISO 11612 and EN 1149.
The SC1 in bleu laminate is a single use Type 3 splash contamination suit designed for use with breathing apparatus worn outside the suit or with a face mask and filter. One piece construction, with chemically protective laminated gloves Kemblok welded to the suit material and integral socks in the same blue laminated material. Hood with neoprene rubber face seal. Sizes S - XXL: SCertified to EN14605:2005
Firefighting trousers in NOMEX® STRIKE (220g/m²), SOFIGUARD treated with PU FR membrane (145g/m²), internal aramid (ARALINEX) lining (250g/m²). Press-stud closure under velcro, external reinforcements on knees, executed in 2 parts for easy bending, removable suspenders, 2 patched leg pockets with extra knee pads in neopreen. bottom finished for protection against water rising, leg hem provided with KEVLAR® re inforcements, leg cuffs. Available sizes: 164/82 untill 194/124. Available colours: navy.
Firefighting jacket in NOMEX® STRIKE, 220g/m², SOFIGUARD treatment with PU FR membrane (145g/m²) and aramid lining (250g/m²). High separate collar, patched radio pocket, microphone loop, zip closure under flap with velcro closure, cuffs with thumbloops, 2 patched pockets with flap and hole loops, torch holder, coated KEVLAR® reinforcements on shoulders and elbows, elongated back, bottom hem finished to prevent water rising, extra internal thermal reinforcements on shoulders and arms. Available colours: navy. Available sizes: S-4XL.
Flame retardant and antistatic long sleeve t-shirt in 60% modacrylic l/ 38% Lyocell / 2% polyester. Cool and comfortable material, regulates body temperature. Available sizes: XS-4XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Trousers, Guardian H²O, flame retardant, antistatic, water and wind proof, elastic in waist, side pockets, reflective bands.
Flame retardant and antistatic t-shirt in 60% Protex®/39% Viloft®/1% AST (180g/m²). V-neck, long sleeves, stitched seams, length back: 69 cm. Very soft and good moisture regulating properties. Available sizes: S- 3XL. Available colours: navy, grey.
Splash suit in chemprotex 300 to be combined with Malina motor unit Clean Air (ordered separately). Suit with attached chemically resistant Kemblok gloves. The trousers have fixed socks and straight legs as a boot cover. Sizes: S - XXL.
Hood, knitted Nomex®, flame retardant, with long collar, oval face opening. Available in: white. Sizes: 1 size.
Flame retardant and antistatic long johns in 60% modacryll/38% Lyocell /2% polyester. Cool and comfortable material, regulates body temperature, elastic waistband. Available sizes: XS-4XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Overboots, Tychem F, antistatic, non-slip soles, elastic and bindingaround the leg. Available in: grey.
Flame retardant and antistatic poloshirt Bladel with ARC protection: Lay-flat collar; Closure with hidden buttons under flap; Round sleeves; Segmented reflective tape (2,5 cm); Back length 74 cm (L). Quality: 55% Protex + 33% cotton + 10% p-Ar + 2% AST; ± 230 g/m². Available sizes: S-3XL. Available colour: Navy.
Multi-risk coverall with arc flash protection, 6 external pockets and 1 internal pocket, double-stitched reflective FR tape. Made from 79% FR cotton, 20% polyester, and 1% antistatic fibers.
Flame retardant and anti-static hat. Provides protection in thermal risk environments. Comfortable and bi-elastic. Available color: Dark blue. Complies with: EN ISO 11612/15, EN 1149-5/18.
Splash suit made of blue laminate. Suit with attachedc hemically resistant Kemblok gloves. The pant legs have integral socksandstraight legsthat can bepulled over boots. The zipper is located on the back of the suit. The suit is designed to be worn over the compressed air equipment. Available in: blue. Sizes: S - XXL.
This multinorm work jacket has a regular fit. The twill weave makes this jacket very strong. The multinorm jacket has an ergonomic fit and pleasant wearing comfort. Quality: 25% polyester and 1% carbon. Available colors: Navy. Available sizes: XS-5XL. Conforms to: EN 1149-5: 2018, EN 11611: 2015, EN 13034: 2005, EN ISO 11612: 2015, IEC 61482-2: 2009.
T-shirt Multinorm 103004 with long sleeves and reflective bands. Quality: 60% Modacrylic / 39% Cotton / 1% Other, 200 g/m². Available colors: Navy. Available sizes: XS-5XL. Complies with: EN 1149-5:2008 and EN ISO 11612:2015.
Hood, 48.5% Meta-aramid, 48.5% viscose FR (lenzingFR), 3% belltron.fire retardant, long collar, oval face opening. Available color: blue. Sizes: 1 size.
Flame retardant ARC T-Shirt with round neck and knitted cuffs. Quality: Cantex Jersey 170AT, 170 g / m². Available colors: Navy. Available sizes: XS-4XL. Conforms to: EN ISO 11612: A1 + A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5.
Offshore work jacket Ramea with arc flash protection: Upright collar; Hidden popper fastening; 2 patched breast pockets with flaps; 2 patched side pockets with flaps; 2 loops for gas detectors; Sleeve narrowing by means of press studs; Extended back. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g / m². Available sizes: 44-64 EU. Available colors: Navy. Conforms to: IEC 61482-2: 2009 class 1 - ATPV 9.4 cal / cm², EN ISO 11612: 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116: 2015, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008 and EN 13034: type PB [6].
Flame retardant and antistatic long underpants for women in 60% merino wool/38% Lyocell/2% polyester. Cool and comfortable material, regulates body temperature elastic waistband. Available sizes: XS-2XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Firefighter jacket Tiger Plus Elite with NOMEX® COMFORT GRID, 200 gr / m², SOFIDRY: â–ª High in 1 piece upright closing collar with wide closure. â–ª Shoulder pads with internal 3D thermal reinforcements and external silicone coated Kevlar® reinforcements. â–ª YKK anti-panic crystal closure with a waterproof flap and velcro closure. â–ª Pockets: o Radio pocket and 1 flashlight holder. o Napoleon pocket + pen holder in the side of the jacket. o 2 patched outer pockets with slanted flap with flap. o Equipped with D-rings for glove attachment. o Knitted aramid cuffs. o Various microphone loops. o All pockets with pull loops. â–ª Pre-formed 3D sleeves with insert. â–ª Unique protectors on the pressure points made in 3D and with RHTI24> 40sec! â–ª Equipped with external elbow protection and reinforced sleeve ends. â–ª The underside of the jacket is provided with an anti-absorbent layer for perfect watertightness. â–ª Extended back for better protection.
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Suitable for work in ATEX environments only in combination with Hazmax ESD boots. Sizes: S - XXL.
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has Kemblok and neoprene gloves attached to the sleeves with a 'locking cuff' . The suit is designed to be worn over the compressed air equipment. With pass-through and CEJN couplings to be able to connect to external air source. Available in: yellow. Sizes: S - XXL.
Flame retardant and anti-static long sleeve t-shirt for women in 60% merino wool/38% Lyocell/2% polyester. Cool and comfortable material, regulates body temperature. Available sizes: XS-2XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Flame retardant and anti static long john in 60% merino wool/38% Lenzing FR®/2% Beltron®. Cool and comfortable fabric which regulates body temperature, elastic waist band. Available sizes: S-XXL. Available colours: grey anthracite.
Flame retardant, antistatic with ARC protection and at the same time comfortable: the most important assets of the Tiolo. This T-shirt with round neck and long sleeves feels very light. The Tiolo is finished with elastic wrist bands and has good moisture-regulating and antibacterial properties. Quality: 60% Modacryl + 38% cotton + 2% AST; ± 220 g / m². Available sizes: XS-4XL. Available colors: Marine. Complies with: EN ISO 11612 A1B1C1F1, EN 1149-5, EN ISO 14116 and IEC 61482-2: 2009 class 1 - ATPV 5.7 cal / cm². PPE category: 3.
Respirex PRPS Powered Respirator Protective Suit in Tychem-TK material complete with Malina Chemical power unit, heads up display, single use battery and pair of Operational filters (Electrical components are approved as intrinsically safe to classification Eex ib llB T3). Each suit is equipped with modified “Camelbak” re-hydration pack, Peakless safety helmet, Thermal socks, inner cotton gloves and Airflow indicator tube all contained in a stowage / carrying case. Suits are labelled with a Serial Number. Available in sizes Small, Medium, Large, X-Large and XX-Large. Included in the box: - Gas tight locking cuff and Kemblok glove - Gas tight zip and Velcro style flap for re-use plus free issue tally - Gas tight seam construction certified to EN 464 - Respirex waist support with one EPD dose meter support - Respirex re-hydration pack - Re-hydration suit extension including disconnect couplings - Light blue secured storage box (riged type) with unique serial number including ensemble log book - Hazbag cable tie and label (Tyvek F) - One pair cotton gloves - One pair Thermal socks - Battery pack (Primary 4 hours) (sealed and included in box) - Set of two CBRN canister (sealed and included in box)
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Sizes: S - XXL.
High barrier Type 3 <(>&<)> 4 chemical suit combined with FR properties. Can be worn over Thermal Protective (EN11612) Garments without compromising thermal protection as a standard chemical suit would. Quality: PVC film / EVOH film/ woodpulp/polyester nonwoven fabric. 232g/m². Available sizes: S-XXXL. Available colours: Dark blue.
Gas tight suit made of Tychem TK, the most resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has replaceable gloves. The suit is designed to be worn over the compressed air equipment. Delivered in a sturdy bag. Available in: yellow. Sizes: S - XXL. Weight: 6 kg.
Flame retardant ladies T-Shirt with round neck and long sleeves. Extended back. Quality: Merino RX, 200 gsm. Available colours: Black/grey. Available sizes: S-2XL. Complies with: EN ISO 11612: A1+A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5, TRANEMO SKINSAFE, ARC RATING: 5.5 cal/cm².
Flame retardant women's boxer shorts in a soft jersey with 20% recycled cotton. Elastic at the waist. Mid-rise waist, regular leg length. Lined crotch area. Quality: Cantex JL, 210 gsm. Available colors: Navy. Available sizes: S-2XL. Complies with: EN ISO 11612 A1+A2 B1 C1 F1, IEC 61482-1-2 CL.1, ELIM: 4.3 cal/cm², EBT: 4.5 cal/cm².
Flame retardant long underpants for women. Quality: Merino RX, 200 gsm. Available colours: Black/grey. Available sizes: S-2XL. Compliant: EN ISO 11612 A1+A2 B1 C1 F1, EN 1149-5, IEC 61482-2: APC 1, ELIM: 4.6 cal/cm² ATPV: 5.3 cal/cm².
Flame retardant boxer shorts with recycled cotton. Quality: Cantex JX, 235 g / m². Available colors: Navy. Available sizes: XXS-3XL, 5XL and 7XL. Conforms to: EN ISO 11612 A1 B1 C1 F1, IEC 61482-2 CL.1, Arc Rating: 7.0 cal / cm².
Splash suit in chemprotex 300 to be combined with Malina motor unit Clean Air (ordered separately). Fitted with a filter mounting nozzle (filter not included) for emergency use in case the motor unit should fail. Sleeve end with glove adaptors. The trousers have fixed socks and straight legs as a boot cover. Sizes: S - XXL.
Flame retardant boxer short. Quality: Merino RX, 200 g / m². Available colors: Black. Available sizes: XXS-4XL. Compliant with: EN ISO 14116: INDEX 3, EN 1149-5.
SIP Protection BasePro chainsaw jacket. The outer fabric is composed of a regular polyester cotton fabric, perfectly suitable for temporary or seasonal forestry work: Short and straight collar; Zip closure; 2 inset pockets with zip closure; Sleeve narrowing by press studs; Back ventilation; Elongated back tail. Quality: 65% Polyester - 35% cotton outer fabric ± 210 g/m². Available sizes: S-4XL. Available colours: Fluo yellow/black and fluo orange/black.
Flame retardant and anti-static long johns for women in 60% merino wool / 38% Lenzing FR® / 2% Beltron®. Cool and comfortable material, regulates body temperature, elastic waistband. Quality: 60% Merino wool / 38% Viscose FR / 1% Antistatic. Available sizes: XS-XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1, EN 1149-5, IEC 61482-2 Class 1 (4kA).
Flame retardant soft sports bra. Spacious, adjustable shoulder straps for maximum support. Quality: Cantex JL, 240 gsm. Available colors: Navy. Available sizes: S-2XL. Complies with: EN ISO 14116 index 3, EN 1149-5.
Stand-up collar with wide one-piece closure, Additional internal thermal reinforcements on the shoulders, External Kevlar® reinforcements on the shoulders, External reinforcements on the elbows, YKK anti-panic zipper with waterproof flap and velcro closure, Pre-shaped sleeves with insert, Rounded back for better protection, Several inspection openings with pockets: − Radio pocket and lamp holder − Napoleon pocket − Two outer pockets with integrated D-rings for attaching gloves, Knitted aramid cuffs, Various microphone clips Over 32 sizes are available, each size is available in seven lengths. Any size modification is possible. Color available: sand Compliant: EN 469:2020 X2 Y2 Z2, EN 1149-5:2018, EN 343:2019 4-4
The Respirex Hazbag is designed to contain a contaminated suit. It is manufactured from Chemprotex™ 300, a high performance chemical barrier material, and measures 1050 x 1370 mm. The Hazbag is supplied with a strong cable tie for sealing the neck of the bag. The facility to mark the bag is also provided by means of a tag and plastic wallet on the cable tie.
Gas tight splash suit made of chemprotex 300. Suit with attached chemically resistant butyl gloves. The pant legs have integral socks and straight legs that can be pulled over boots. The gas tight zipper is located on the back of the suit. The suit is designed to be worn over the compressed air equipment. Sizes: S - XXL. Can be used in Atex zones 1 and 2. Conform: EN14605 Type 3. Accessory: anti-mist klar pilot for visor 1002608.
The Chemmaax 3 Coolsuit has a multi-layer composite fabric which enables an effective and tough high barrier to hazardous chemicals with a breathable back panel to increase comfort. Quality: 170 gsm composite, breathable SMMS back panel. Stitched and PE taped. Available colors: Grey/orange. Available sizes: S-3XL
Gas tight suit Viton laminated, the most resistant material for reusable suits.Suit with replaceable boots. The breathing apparatus is worn inside thesuit. Equipped with a connection for automatic switch valve. With replaceable gloves. The Hazmat suit comes in a suitcase. Available in red. Sizes: specify.
Allows contaminated casualties to change in a dignified manner as possible after being decontaminated in a drench shower. Pack contains: orange zip-up holdall with instructions, pair thick grey socks, pair black rubber non-slip footwear (adult kit, size 42), pair of disposable underwear, disporable green blouse and trousers, disposable white towel, sanitary towel, olive green waterproof trousers and jacket, P3 dust mask, bag for disposal.
Allows contaminated casualties to change from their own garments in as dignified a manner as possible prior to decontamination in a drench shower. Pack contains: pair of disposable gloves, disposable face mask,pair of surf shoes (size 8), thermal waterproof cape, pair of socks, numberd cloting bag, numbered valuables bag, 'fish'knife, face wipe, 2 cable ties, numbered wristband, pictogram instructions(adult)
The Respirex Hazbag is designed to contain a contaminated suit. It is manufactured from Chemprotex™ 300, a high performance chemical barrier material, and measures 180cm x 120cm. The Hazbag is supplied with a strong cable tie for sealing the neck of the bag. The facility to mark the bag is also provided by means of a tag and plastic wallet on the cable tie.
Long sleeved flame retardant and antistatic t-shirt in 60% merino wool/38% Lenzing FR®/2% Beltron®. Very comfortable and heat regulating properties, elongated back, long sleeves. Available sizes: XXS-XXL. Couleurs disponibles: anthracite.
