BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Waterproof fully lined winter glove with soft, durable goat grain in the palm. The glove has touchscreen function on the back of the middle finger, pre-shaped fit and synthetic stretch material at back of hand. The cuff, which has a half<(>&<)>#02;length cut, is elastic at wrist to ensure that the glove stays firmly in place. Sizes: 6-13.
Flexible, tight-fitting winter work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides a good grip. 15 gg liner combined with a 7 gauge acrylic inside lining for cold protection. Cut protection level F, approved for contact heat upt to 250°C (15sex) and food safe. Oeko-Tex approved and ESD tested. Compatible with Touchscreens. Sizes:7-12.
Probably the thinnest cut F glove on the market, made with the new advanced CRF®Omni technology, nylon and elastane. 18 gg knitted glove and PU-dipped, superior for any work with very sharp and small objects. Reinforcement between the thumb and index finger and touchscreen functionality. The new CRF® Omni technology does not contain any steel or glass fiber that can irritate the skin. The gloves stay soft and comfortable throughout the work task. CAT II . In line with : EN ISO 21420:2020 - EN 388:2016+A1:2018 3X43F
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 10,000 volts, operating voltage of 7500 volts. Length 41 cm, Sizes: 7-12.
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 406 mm.
Medium duty glove with TPR impact protection on the upper hand and fingers, TPR design with smooth knuckles and 2 separate fingers. Durable padded red artificial leather palm, with reinforcement around the index finger to protect sensitive areas. The tips of the index, middle finger and thumb are suitable for touch screen work. Good visibility for extra safety. Sizes: 8-13. Conforms to: EN388: 2016 2.1.2.1.X.P
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing. Sizes: 8-12. Lenght: 460 mm Certified Category R/C. Arc Flash score EBT: 88 cal/cm²
Lined winter glove in goat leather. Open cuff. Thin. Fully lined. Sizes 7-11.
PowerFlex®+ 80-602 glove is the practical answer to the safe handling of glass, metal and plastics. It offers exceptional cut resistance and robust overall mechanical performance, plus superior comfort. In both wet and dry conditions, this glove grips superbly. The PowerFlex® 80-600 is truly a unique glove solution that provides the highly efficient combination of protection plus natural dexterity.
Waterproof PVC bag with small karabiner to attach to belt. Ideal for storing and transporting electro gloves. Dimensions: 450x180x70 (mm)
Extremely flexible goatskin work glove, designed for tough, hot working environments. Upper reinforced with heat resistant meta-aramide fibres and reinforced knuckles. Inner hand lined with para-aramid, which also provides cut protection level B, and reinforced externally for enhanced protection. Heat resistant double stitched seams. Sizes: 7-12.
A durable neoprene glove with great dexterity and excellent grip. The glove is comfortable and flexible due to the preformed fit and the Velcro at the wrist ensures that the glove stays in place. The glove has a touchscreen function and excellent grip in the palm thanks to the Guide Grip Pattern. Padded palm and thumb/index finger reinforcement for a long glove life. Sizes: 7-12. Complies with: 2.1.2.1.X, EN511: X.2.X, EN407: X.1.X.X.X.X
Butyl rubber glove against very aggressive chemicals. Improved ergonomics and increased flexibility through a unique butyl formula that feels soft and maximizes flexibility and dexterity. A reinforced grip due to a raised diamond pattern. Length 35 cm, thickness 0.35 mm. According to EN 374-1:3016 TYPE A - ABCIKMPST and 374-5:2016
Green nitrile gloves for single use with roughened surface. Chlorinated interior for easy on and off. Reach compatible.
Cut resistant gloves knit from Zirnium® thread, length 25 cm.
Thin glove for medium arc flash protection with high cut resistance. Flame retardant neoprene coating on the palm. Sizes 7-11. Complies with: ASTM F2675 ATPV palm: 22cal/cm², backhand 5.9 cal/cm², IEC 61482-1-2 CL1 EN388:2016: 3X31D EN407: 41XXXX
Durable anti-cut quality leather welding gloves in cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 8-9-10-11.Length cuf: 15 cm.
Arm protector heat and cut resistant. Length 45 cm.
This glove was developed together with experts from the Dutch Defense. The target was to develop a glove that offers both a maximum protection during fast roping practices and a high tactility for handling weapons in case of interventions. Where most fast roping gloves fail to meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm offers superb grip on both dry and wet ropes and is a great buffer against the heat accumulation during fast roping. On top of that, in this case handling weapons with these gloves is no longer a theme. Sizes: 7-14.
This highly durable natural latex glove offers a high level of protection and good flexibility. Cotton lining creates comfort and the pattern on the hands ensures a particularly good grip. The gloves are extra long and come in two colors, blue and orange. For orange choose 8163 . Suitable for contact with foodstuffs . CAT III . In line with : EN 388:2016+A1:2018 3131X EN ISO 374-5:2016 EN ISO 21420:2020 EN ISO 374-1:2016/Type B AKLPT EN 407:2020 X2XXXX
Glove with excellent grip in oily environments, preventing slippage and injuries. Triple-coated with nitrile foam in the palm, for a solid oil barrier. Lining with 18 gg knitting technique and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 4.X.1.1.A - EN 407:2020: X.1.X.X.X.X
Orange insulating natural rubber gloves. Their thinness and grip surface make them easy to handle. Excellent dexterity. Sensitive to touch, maximum grip in wet conditions. Working voltage of 1,000 volts, test voltage of 5,000 volts. Sizes: 7–11 Compliant with: EN60903 Class 0, AZC. Arc Flash: ASTM F2675. ATPV: 12 cal/cm².
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 3: operating voltage 26,500V, test voltage 30,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-11.
Cut and heat resistant arm protector 35 cm. Conform: EN388:2016 2.X.4.X.E
Chlorinated (provides more comfort and is less sticky) with texture on the fingertips. Biodegradable. Size XXL: 90 pieces per dispenser.
Glove with black HPPE and Zirnium and black PU coating and reinforcement in black split leather on palm, and fingers. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Highest cut resistance. Sizes: 7-11, lenght: 25cm.
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
ESD working glove compatible with touch screens. Seamless nylon / carbon. Without coating. Very comfortable. Sizes: 5-11.
Extremely good fingertip sensitivity, extra flexible, perfect fit and extremely light glove. Seamless knitted white nylon (13 gauge) Suitable for light applications in dry circomstances. Sizes: 6-11. In line with EN388: 2.1.2.X
Cut-resistant glove in special graphene fibers with HCT® Nitril Nano-foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers. Touchscreen compatible.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 41 cm.
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. Touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. DMF free, with impact protection on the back of the hand. Sizes 6 - 12.
Protection against cryogenic cold down to -197°C, thanks to a wool/cotton fleece lining and an ISO Air felt for protection against e xtreme cold. Protection against cryogenic gas splashes (liquid nitrogen or liquid carbon dioxide). The quality of the leather, lined with a waterproof membrane, is the same on the palm and the back of the cryogenic gloves. This model of short cryogenic glove fits snugly around the wrist thanks to an elastic cuff. Additional wrist protection is provided by a leather artery protector on the inside of the wrist. Conforms to EN388: 3222X , EN511: 231 , EN407: x3XXXX
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a 3/4 liquid-tight coating. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Canvas protective bag made of 100% cotton for the storage of insulating gloves for electricians. Size: 14 inches.
Gloves designed for work in cold working conditions. The combination acrylic/spandex in the seamless liner (13 gauge) combines a light weight with warmth and suppleness. The double latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: 7(S)-11(XXL).
Very fine and cut resistant glove (43.9N) designed for fine work with high cut risks. Can be washed up to 5 times at 40°C without loss of efficiency.
The thinnest glove with cut protection level F, with the new advanced CRF® omni technology with a reinforced HPPE cut protection fibre. 21 gauge, with PU coating. Reinforcement between thumb and index finger and touchscreen functionality. Conforms to: EN ISO 21420:2020 - EN 388:2016+A1:2018 2.X.4.2.F
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Offers protection against contact heat of 100°C during 37 seconds, and 250°C during 12 seconds. Sizes: 8,9,10.
Sleeve in polyester, nylon and glass fiber with adjustable Velcro strap system.Lenght: 475mm. Characteristics: Cuff with excellent protection against heat, cut risks and abrasion.Thermal protection upto 100°C. EN388:2.5.4.2 and EN407:X.1.X.X.X.X
Butyl rubber glove against very aggressive chemicals. Improved ergonomics and increased flexibility through a unique butyl formula that feels soft and maximizes flexibility and dexterity. A reinforced grip due to a raised diamond pattern. Length 35 cm, thickness 0.35 mm. Palm thickness: 28 mil/0.7mm According to EN 374-1:3016 TYPE A - ABCIKMPST and 374-5:2016 EN 16350 - EN421
Seamless lined glove with foam latex coating on the full glove and extra latex on the palm. Extremely good grip and abrasion resistance. Carrier in nylon/polyester. Sizes: 6(S) -10 (XXL).
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. Sizes 6-12.
Cut-resistant glove in special graphene fibers with HCT® micro foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers.
The first disposable glove resistant to acetone for at least 15 minutes. This glove features an innovative multi-layer design with Type A chemical resistance. Enhanced mechanical protection. The striking orange color improves visibility. Sizes: 6,5-7 to 9,5-10 length: 285mm, thickness: 0.50mm Compliant: EN388: 2110A EN374 TYPA A: JKLOAPST VIRUS EN421
Cut resistant, seemles knitted nylon-spandex-basalt fibre thread, CFR technology,stainless steel fibre yarn gloves (13 gauge) with insulating layer nitrile foam/aqua PU in the palm with reinforcement between thumb and index. approved for food handling, touch screen compatible, . Heat resistant up to 100°C contact heat. DMF free. Designed for heavy work.Sizes: 6-11.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing. Sizes: 8-12. Lenght: 410 mm Certified Category R/C. ATPV 25cal/cm²
Supple glove in unthoughened vulcanised rubber. Test voltage 5.000 volt, use voltage 1.000 volt. This glove is suitable in any environment where protection for electrocution is necessary because of its isolating quality and high dexterity. Sizes: 7-12.
The ultralight MFT PRO 381 gloves are designed with flexibility and comfort in mind, even during extended wear. The unique microfiber design, weighing only 19 g and with a finger thickness of just 0.84 mm, ensures the 381 offers optimal tactility when working on delicate projects. Sizes: 6-10 Compliant: EN388: 4121X
Protective overglove made of flame-resistant premium goatskin leather for electrical insulating gloves. Enhanced protection without compromising dexterity. For use with Class 00 ULW and Class 0 APC2 electrical gloves. Length: 255 mm Sizes: 7–12 Compliant with: EN388:2X21X
Static dissipative glove: exceptional protection against electrostatic discharge. Proprietary nitrile formulation: ensures low vertical resistance below 10⁸ Ω. TNT™ Chemical Splash Resistance Technology: enhanced chemical protection. Touchscreen compatible. Food approved. Length: 24 cm Thickness: 0.16 mm Sizes: S – XXL Compliant with: EN 16350, EN 374: JKPT – VIRUS
Glove with nitrile coating (cotton/polyester). Length: 30cm. Glove with high finger sensitivity.
Protective sleeve para-aramid with a length of 40cm. One size
Made of graphene fibers, without stainless steel or fiberglass, with unique heat regulation. Odor neutralization and bacteriostatic properties make the arm protector smell fresh and kill harmful bacteria.
Specially developed for operating firearms, ultra-thin and slim wit, feels like a second skin. The synthetic suede in the palm protects the user against contact heat of 100°C for 10 seconds.
Disposable glove in nitrile materia, blackl. Powderfree. Palm and back with full-surface, non-slip fish scale structure. Firm grip in wet conditions, oil and grease. 24cm, 0.14mm thickness. Food safe. Sizes: S-XL. Conforms to: EN374-1:2016: Type B GKLMT; EN374-5:2016
Cut resistant gloves with Kevlar® liner in combination with roughened latex coating offer good grip and optimal protection against cutting injuries in both dry and damp environments. Sizes: S / M / L / XL. Available in: blue.
High-quality, heat-proof glove in para-aramid and cowhide leather. Wool lining, cuff length 15 cm. Suitable for contact heat up to 500°C for 15 sec.
Dexterous cut resistant glove with highest cut level F, suitable for precision work. Ultra light thanks to 18 gg knitted with CRF® Omni cut resistant technology. Palm dipped with super soft nitrile foam that provides excellent grip on dry surfaces. Reinforced thumb crotch for improved longevity. Breathable materials for all day comfort. Wide range of sizes means a perfectly fitting glove for everyone. Skin friendly with Derma-test and Oeko-Tex certificate. CAT II . In line with : EN 407:2004 X1XXXX - EN 388:2016 4X43F - EN 420:2003+A1:2009
Sterile cut resistant glove. Dyneema Diamond yarn. Sterility Assurance: These two-glove liners also have a Sterility Assurance Level (SAL) of 10-6 , for a lower risk of contamination. The BioClean™ cut resistant liner S-BCRL is specifically designed to be worn between two cleanroom gloves. Class 10/ISO Class 4 & EU GMP Grade A/B and other sterile cleanroom heavy duty applications for extraction and maintenance with a risk of cuts and bruises. Sizes: XS-XL. Conforms to: EN388:2016: 3.X.4.X.B
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
