BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
The Kingsplit is a new RP glove made of heavy cowsplit leather, with split leather palm reinforcement. The gloves are lined and have a rubber reinforced cuff (10cm), elastic in the back and protection at the knuckles.
60 cm cut and heat resistant arm protector. Contact heat to 100°C for max . 15 seconds (tested internally). With thumb hole and Velcro closure on upper arm.
Extremely good fingertip sensitivity, extra flexible, perfect fit and extremely light glove. Seamless knitted white nylon (13 gauge) Suitable for light applications in dry circomstances. Sizes: 6-11. In line with EN388: 2.1.2.X
Durable anti-cut quality leather welding gloves in cow split leather water and oil replleant for beter heat resistance. With waterproof and breathing membrane. Excellent protection of fore arm due to a 15 cm long heat resistant leather cuff. Sizes: 8-9-10-11.
Economical solution for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless polyester lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
This glove was developed together with experts from the Dutch Defense. The target was to develop a glove that offers both a maximum protection during fast roping practices and a high tactility for handling weapons in case of interventions. Where most fast roping gloves fail to meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm offers superb grip on both dry and wet ropes and is a great buffer against the heat accumulation during fast roping. On top of that, in this case handling weapons with these gloves is no longer a theme. Sizes: 7-14.
Supple winter gloves made of yellow cowhide leather with a warm lining. These gloves have an ergonomic design and provide high tactility. Available in: yellow cowhide leather. Sizes: 9 / 10 / 11.
Fully nitrile coated glove. Flexible and close-knit glove for excellent grip in wet and oily conditions. Unique: Also checked for food contact. Available in sizes: 7, 8, 9, 10 and 11.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. Sizes 6-12.
18 gauge knitted glove made of HPPE, polyamide and Spandex fibres. Nano foam nitrile coating on palm and 3/4 back. Protection against impact on back and fingers. Touchscreen. Sizes: 7 to 11. Conforms to: EN388:2016: 3.X.4.2.D.P
Thin work glove made of synthetic leather with preformed fingers. Very breathable, with open cuff. Sizes: 7-11.
Cut and heat resistant arm protector 35 cm. Conform: EN388:2016 2.X.4.X.E
Seamless knitted glove (15 gg) with enhanced grip for wet and oily conditions, offering excellent dexterity and sensitivity. Featuring XLNT nitrile technology, food-grade, soft feel and a snug fit, with a tight and flexible cuff. Free of DMF, silicone, and natural latex. Oeko-Tex Standard 100. This FA (Food Adjusted) version is unprinted. Sizes: 6-11, Conforms to: EN388:2016 4.1.2.1.X, EN407: X.1.X.X.X.
Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.
Gloves with high cut resistance and PU coating. 18 gauge. Very thin knit, 0.7 mm. Touchscreen. Reinforced thumb cavity. Sizes 6-12. Complies with: EN388:2016: 3X43F
Gloves made of cowsplit leather with a 7 cm protective cuff. Available in: green/white. Sizes: 8 / 9 / 10.
Cut resistant, completely seamless grey knit gloves with black nitrile coating. Excellent tactility combined with highest level of cut protection, even on oiled objects. Sizes: 8 / 9 / 10 / 11.
Durable quality leather welding gloves in red cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 9-10-11-12. Length: 35 cm. welding.
Arm protector heat and cut resistant. Length 45 cm.
Finger-sensitive glove with double waterproof nitrile foam coating on a cut-resistant PE carrier. Highly cut resistant. Glove 3/4 coated. Suitable for all operations requiring high finger sensitivity such as assembly, packaging, automotive, steel and glass industry, ... Sizes: 7-11.
Protective overglove made of flame-resistant premium goatskin leather for electrical insulating gloves. Enhanced protection without compromising dexterity. For use with Class 00 ULW and Class 0 APC2 electrical gloves. Length: 255 mm Sizes: 7–12 Compliant with: EN388:2X21X
Cut-resistant glove in special graphene fibers with HCT® Nitril Nano-foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers. Touchscreen compatible.
Impact resistant glove for demanding environments. Large back coverage. Touchscreen. High visibility colours for improved hand gestures. Conforms to EN388:2016: 4.X.4.3.D.P, EN407:2020: X.1.X.X.X.X
Goat leather gloves of standard quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver EC (standard quality) and Driver (super quality).
Leather glove, Winter-lined, 0,7-0,8 mm, Full grain goatskin, Neoprene, Spandex, Thinsulate™ 100g, Cat. II, Blue, black, white, Reinforced fingers and thumb, Waterproof, Velcro®, for allround work. EN 388:2003, 2111X EN 511:2006, 111
Glove with black HPPE and Zirnium and black PU coating and reinforcement in black split leather on palm, and fingers. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Highest cut resistance. Sizes: 7-11, lenght: 25cm.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. Touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. DMF free, with impact protection on the back of the hand. Sizes 6 - 12.
Premium full-grain goatskin leather glove with winter lining for warmth and durability. Features 150g Thinsulate™ insulation for unparalleled comfort. The lining features individual finger cuffs for an optimal fit. The waterproof design keeps hands dry, and the specially designed thumb provides increased flexibility. Reflective detailing enhances visibility in low light. Sizes: 7-12. Conforms to: EN388: 2121X EN511: 321
Cut-resistant glove in special graphene fibers with HCT® micro foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers.
Durable anti-cut quality leather welding gloves in cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 8-9-10-11.Length cuf: 15 cm.
Innovative impact protection and cut resistance glove offers protection against liquids combined with superior dexterity for ultimate comfort in a variety of applications. TPR impact protection on top of the hand and along the entire length of the fingers. Patented double coating technology. Full nitrile coating with smooth finish for liquid resistance. Half nitrile palm coating with sand grain finish for extra grip on wet and dry surfaces Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Sizes: 7-13. Complies with: EN388:2016 4.X.4.4.F.P
Gloves designed for work in cold working conditions. The combination acrylic/spandex in the seamless liner (13 gauge) combines a light weight with warmth and suppleness. The double latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: 7(S)-11(XXL).
Knitted cut resistant glove (8cm cuff) with double nitrile coating. A gray smooth base nitrile coating on palm and three quarters back that prevents fluids can penetrate. Moreover, a black foam nitrile coating for excellent grip in dry and wet conditions. The carrier consists of highly cut resistant fibers, nylon and spandex. . Very comfortable and excellent protection against abrasion and cut risks, in many applications where oil is being used. Application: glass industry, metal assembly, plastic injection, etc. ..
Cut resistant glove, Nitrile, Palm-dipped, CRF® Technology, Glass fibre thread, Nylon, Polyester, Spandex, 13 gg, Foam grip pattern, Cut resistance level 5, Cat. II, Black, Water and oil repellent palm, for fine assembly work. EN 388:2003, 4544
Overglove light voltage in premium goat skin leather for insulated rubber gloves of class 0 & 00. Offers mechanical protection and extends the life of rubber insulated gloves. Lenght: 24-27 cm. Sizes: 7-12. ATTENTION : order these gloves in a size larger than your normal glove size.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
Made of graphene fibers, without stainless steel or fiberglass, with unique heat regulation. Odor neutralization and bacteriostatic properties make the arm protector smell fresh and kill harmful bacteria.
Highly dexterous glove with high cut resistance. Nitrile foam coating with Aerofit technology (up to 30% thinner). Breathable 21 gauge liner. Food approved. Touchscreen compatible. Sizes: 5–12 Compliant with: EN 388: 3X32F
Very wear-resistant FORTIX ™ nitrile foam coating on a 15-stitch per inch, nylon spandex lining, with coated palm. Tricot cuff. Length 200-275 mm. Grey and black. Silicones free. Sizes: 6-11.
The lightest and most comfortable cut resistant glove thanks to the Dyneema® Diamond fibre and technology. A quality combination of high sensitivity, cut resistance and comfort. The Dynablade PU Light has a polyurethane (PU) coating which gives you exceptionnal grip. Thanks to the special Dyneema® fibre your hands are kept cool and ventilated. A no use of glassfibre guarantees a longer duration of its cut resistant properties. If you work in applications such as assembly, packaging or logistics, this glove is a must have. Available sizes: 7- 11.
Dexterous cut resistant glove with highest cut level F, suitable for precision work. Ultra light thanks to 18 gg knitted with CRF® Omni cut resistant technology. Palm dipped with super soft nitrile foam that provides excellent grip on dry surfaces. Reinforced thumb crotch for improved longevity. Breathable materials for all day comfort. Wide range of sizes means a perfectly fitting glove for everyone. Skin friendly with Derma-test and Oeko-Tex certificate. CAT II . In line with : EN 407:2004 X1XXXX - EN 388:2016 4X43F - EN 420:2003+A1:2009
Thin 18‑gauge cut‑resistant glove with nitrile coating. Touchscreen compatible and food approved. Sizes: 6–11 Complies with: EN 388: 4X31B – EN 407: X1XXXX
Gloves with a yellow nitrile layer on interlock lining. Coated palm, open back, tricot cuff. Good grip and abrasion resistance. Ideal for light work and in warm environments.
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Antistatic, silicone-free and DMF-free.
Cut resistant, seemles knitted nylon-spandex-basalt fibre thread, CFR technology,stainless steel fibre yarn gloves (13 gauge) with insulating layer nitrile foam/aqua PU in the palm with reinforcement between thumb and index. approved for food handling, touch screen compatible, . Heat resistant up to 100°C contact heat. DMF free. Designed for heavy work.Sizes: 6-11.
Ultra-thin, antistatic gloves with polyurethane coating on palm and seamless lining on the back. Excellent tactility.
Seamless lined glove with foam latex coating on the full glove and extra latex on the palm. Extremely good grip and abrasion resistance. Carrier in nylon/polyester. Sizes: 6(S) -10 (XXL).
Sleeve in polyester, nylon and glass fiber with adjustable Velcro strap system.Lenght: 475mm. Characteristics: Cuff with excellent protection against heat, cut risks and abrasion.Thermal protection upto 100°C. EN388:2.5.4.2 and EN407:X.1.X.X.X.X
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a liquid-tight palm and an airy top. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
This glove combines 3 important elements needed for handling ropes: dexterity, high abrasion resistance, and good grip.
Textile glove, Cold insulation gloves, 7 gg, acrylic, for allround work: Fishing, hunting, shop work. CAT I . In line with : EN 420:2003+A1:2009, EU Regulation 2016/425.
Knitted glove made of HPPE and cobalt (without fiberglass), 13 gauge. Double RGO GRIP coating (nitrile + microfoam-nitrile) on the palm and three-quarters of the back. Elasticated wrist. Touchscreen. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D, EN407:2004: X.1.X.X.X.X
Sterile cut resistant glove. Dyneema Diamond yarn. Sterility Assurance: These two-glove liners also have a Sterility Assurance Level (SAL) of 10-6 , for a lower risk of contamination. The BioClean™ cut resistant liner S-BCRL is specifically designed to be worn between two cleanroom gloves. Class 10/ISO Class 4 & EU GMP Grade A/B and other sterile cleanroom heavy duty applications for extraction and maintenance with a risk of cuts and bruises. Sizes: XS-XL. Conforms to: EN388:2016: 3.X.4.X.B
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Sizes: 8,9,10.
High quality cow grain leather glove (beige) with pistol reinforcement on the palm in cow split leather. If you need a solid glove with very good grip, this is the ideal solution! The glove is fully lined with a very comfortable cotton lining and has an extra long rubberized cuff of 10 cm for better protection of the forearm. The glove reaches outstanding mechanical results and is available in a lot of sizes. Sizes available: 8-12. The gloves are designed to use in the construction sector, transport and distribution. Conform: EN388: 4.2.4.4
Solution for users looking for a glove that keeps hands warm and dry, protects them from contact heat, and offers high protection against cuts.
Glove with excellent grip in oily environments, preventing slippage and injuries. Triple-coated with nitrile foam in the palm, for a solid oil barrier. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.3.C, EN407:2020: X.1.X.X.X.X
"Safety glove with water-repellent aqua-polymer foam coating for outdoor use. Aqua-polymer foam coating on the fingertips and part of the back of the hand. Sizes: 6 to 12. Compliant with EN 388:3131X."
Cut-resistant gloves with Hagane coil liner in combination with the nitrile foam coating on the palm provide a good grip and optimum protection against cutting wounds in both dry and humid environments. Sizes: 6-10.
Winter glove with a 13-gauge polyester outer liner. The waterproof membrane ensures the glove is fully waterproof while allowing moisture vapour and perspiration to escape. Polyacrylic inner lining. Nitrile foam coating. Touchscreen compatible. Oeko-Tex certified. Sizes: 7 to 11. Compliant with: EN 388:2016: 3.X.2.1.C EN 511: 1.2.1
Ansell HyFlex 11-814: Ultra-thin, breathable work glove with exceptional sensitivity, strong grip, and excellent comfort – ideal for precision work. 18 gauge. Nitrile foam coating. Sizes: 5-12 Compliant with: EN388: 3121A
Glove made of green grain leather and aramid thread for protection from cut wounds. With 2-hand protection against chain saws.
Carrier: Nylon / Dyneema® with roughened nitrile coating. Nylon inner glove for better comfort. Waterproof. Protection up to 500BAR. Sizes: 9 and 11. In line with EN388: 4.5.4.4
Top quality welding glove made of black analyne leather on palm and back and lined cuff of 15cm in super split leather for even better heat resistance. This glove is super comfortable and has a good dexterity. The palm is extra reinforced, which increases the durability of the glove. With kevlar seams.Glove can be used for MIG/MAG and electrode welding. Available color: black/gold Available sizes: 10, 11
• 15 gauge grey Kyorene® graphene liner • Full blue nitrile coating with black HCT® micro foam nitrile palm coating for superior oil and water resistance • Bacteriostatic kills harmful bacteria • Thermal regulating to keep the hands comfortable • Odor neutralizing to keep the gloves smelling fresh • DMF and silicone free
This glove offers excellent grip in dry, wet and slightly oily environments. Coated knuckles and triple nitrile foam palm coating for a solid oil barrier. Lining with 18 gg knitting technology and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 4.1.1.1.X - EN 407:2020: X.1.X.X.X.X
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 457mm.
Heavyweihgt working glove in piggrain leather, collar model, specially-sewn thumb, cotton back and cuff. Extra small end extra large sizes : 4, 7-13.
Antivibration protection for building and construction applications. Synthetic glove with premium PU in the palm. Damping foam for excellent anti vibration performances. Ventilation between the fingers. Exellent fit and preformed hand shape. Sizes: 7-12.
