BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Durable heatprotective quality leather in the palm of this welding glove. Back of the hand in aluminised para-aramide. Hand is completely lined with para-aramid/cotton fabric and a Porelle membrane: water- and damp-proof. Sizes: 8-9-10-11.Length 45 cm.
The first ultra-light weight HyFlex® style to combine a ¾ dip geometry, oil repellence and oil grip into a highly dexterous, high comfort glove. The HyFlex® 11-925 features Ansell’s proprietary grip technology providing reduced risk of slippage in dynamic environments. The liner is constructed with fine gauge nylon/spandex yarn providing the user with an unrestricted second skin feel. This unique blend of protection, performance and flexibility features bridges the gap from previous generations of ¾ dip oil repellent general purpose gloves, delivering enhanced flexibility, tactility, oil grip and extreme comfort.Sizes: 6- 11. In line with EN388 3.1.1.1.
Guide 6202 CPN - A cut, puncture and needle resistant glove in soft synthetic leather for good versatility and a steady grip. Alycor etechnology in the palm, over the fingertips and the upper surface of the fingertips; protects from needles and other sharp objects. Designed particularly for situations where it is vital to keep sensitivity and where there is a risk of needle puncture and cut injury. The glove is designed fully in black to achieve as low profile as possible. Suitable for police and customs officers, security guards and prison officers where there is a risk of needle puncture and cut injury. Sizes: 6-13
Soft yet robust technical liner, engineered to offer protection against the cold and heat, as well as cut level A4/D protection Exceptional anti-wear properties and double protection against thermal hazards. Extremely durable latex coating with increased resistance around the thumb for extended use. Conform EN388:3X43D EN511: X1X EN407: X2XXXX
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X.
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility.
These supple and comfortable outdoor gloves are made of water repellent cowgrain leather and fitted with an efficient and elastic 5 cm cuff. Sizes: 9 / 10.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Completely seamless gloves made of nylon with polyurethane coating on the palm. Extremely high wear comfort due to breathability, perfect fit and optimal tactility. Available in: white, grey. Sizes: 7 / 8 / 9 / 10 / 11 / 12.
Synthetic glove, Nitrile, 3/4 dipped, Acrylic, Polyester, 10 gg, 13 gg, Sandy finish, Cat. II, Yellow high-viz, black, High-viz colour, Water and oil repellent palm and knuckle, for allround work . EN 388:2003, 4331 EN 511:2006, 02X
Leather glove, Unlined, 0,6-0,7 mm, Full grain goatskin, Nylon, Cat. II, Blue, white, Elasticated 180°, for fine assembly work . EN 388:2003, 2010
Nitrile coated gloves with a tricot cuff that fits closely around the wrist. Nitrogrip Light is extremely supple to wear and provides both fine tactility and a good grip. Sizes: 8 / 9 / 10.
Glove with PE and Zirnium. Extremely good cut resistance.
Cut resistant glove for medium weight applications requiring high level of performance in dry or slightly oily environments. 13 Gauge seamless knit liner of HPPE, Fiber glass, nylon, nylon, plyester, spandex with foamnitrile coating. The coating has an excellent abrasion resistance, and good level grip in dry and slightly oily environments. Sizes: 6-11.
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The nitrile coating in the palm provides excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 5-11. Complies with: EN388:2016 4.X.4.3.C, EN407: X.1.X.X.X.X
Finger-sensitive glove with nitrile coating and nipples. Coating resistant to contact heat of 250°C for 15 sec. Gloves GS industry.
Soft flexible liner offering suppleness and dexterity. Excellent tactile sensitivity with superior comfort. Anatomically engineered, reducing hand fatigue and increasing comfort. Excellent grip performance for safe handling in dry-to-oily applications. Sizes: 7-11. Complies with: EN388:2016 4.1.3.1.X
Glove in water-repellent cowhide leather that should be worn over electrical gloves as mechanical and puncture protection (not mandatory for composite models). More spacious model that easily fits over electrical gloves with a velcro closure for an ideal fit. Check the technical datasheet to determine the correct size.
Heat resistant glove in full grain goatskin on the palm and full grain cowhide on the back of the hand. Fully Kevlar lined. Reinforces thumb, index and seams. Oil and water repellent. For use in harsh and moist environments. Size: 7-13.
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 356mm. Breedte: 35,56cm.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. Oeko-Tex standard 100. DMF free, with impact protection on the back of the hand. Sizes 6 - 11.
The new INTERCEPT™ fibre offers unrivalled cutting protection and more comfort and mobility. The coated palm design gives the user more grip, prolongs the life of the glove during abrasive work and allows the back of the hand to breathe. The PU coating does not hinder processing of painted metal parts. The grey coating camouflages dirt when working in polluted environments.
Glove with double nitrile coating on a very thin and supple lining in nylon/spandex. The double coating protects the palm and ¾ back from penetration of oils (red nitrile coating) without loss of grip (black nitrile foam). Highest protection in combination with excellent comfort! EN407:2020: X1XXXX
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating provides a good grip. 15 gg liner and extra reinforcement along the thumb and index finger. Cut protection level D, approved for contact heat up to 100°C for max.15 sec. Approved for ESD and food safe. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.D, EN407: X.1.X.X.X.X
Seamless glove with nitrile 3/4 coating. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Nylon carrier.
18gg liquid-tight cut protection glove with double-dipped palm; first layer of nitrile fully dipped for extra liquid barrier, second layer of nitrile palm dipped. Oeko-tex certified. Touch screen. Sizes: 7-11. Conforms to: EN388:2016 4.X.4.2.D EN407: X.1.X.X.X.X
Very finger-sensitive glove with nitrile coating and nipples. Coating resistant to contact heat of 100°C for 15 sec. Sizes 7/ 9/ 11.
Fully seamless knitted glove with a black PU coating on a blue 15 gauge liner (HPPE / Polyester / fiberglass). High sensitivity, elastic, extra thin and a good grip. Sizes: 7/8/9/10/11. This glove offers the highest comfort combined with an average cut resistance level (class B). Touchscreen. Applications: General all-round work glove, light assembly, logistics., Transport and storage. In accordance with: EN388 3.X.4.2.B
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF-free.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and supple model (18 gauge) has a double coated palm for total liquid protection. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and touchscreen function. Sizes: 7-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
ESD working glove seamless knitted 15gg, tight fit, with rolled knitted cuff. Touch screen compatible. PU coating on fingertips. Very comfortable. Sizes: 5-11.
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
The latex coated glove with steel, fiberglass, Kevlar lining and extra long knit cuff is the practical solution for a safe way to manipulate glass, metal and plastic. She is distinguished by an exceptional cut resistance, excellent overall mechanical performance and superior comfort. In wet or dry conditions, this glove an excellent grip thanks to the coating on the palm of natural rubber. The PowerFlex ® 80-658 is a unique glove on a highly efficient way to adequately protect combines with natural dexterity.
The new generation of working gloves offering maximum grip with maximum impact protection. Abrasion resistant nitrile foam coating provides exceptional grip in dry environments as well when working when ther is water, grease and oil contact. Lightweight and breathable seamless liner (13 gauge) with Hook <(>&<)> Loop strap for secure fit all day long. Sizes: 7(S) - 12(3XL).
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, impact protection on the back of the hand and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass.
Thin and comfortable shock-absorbing glove with cushioning Poron material in the palm and on the underside of the glove.
Level F cut resistance. Protects from glass, blades and abrasions. Protection against contact heat up to 100°C. Crinkle latex grip offers excellent grip. Reinforced thumb crotch for extra protection and durability. Superior strength and comfort. Reflective label for improved visibility .Breathable seamless liner 13 gauge liner for a perfect fit. Sizes 6(XS)-11(XXL). Conform: EN388:2016 3.X.4.3.F, EN407: X.1.X.X.X.X
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 40 cm.
Robust gloves made of sturdy cowgrain leather, with a 9 cm cotton protective cuff and palm reinforcement. Attractive, highly visible look with yellow and blue stripes. Available in: yellow/blue.
Blue knitted food approved hydrofobe glove from the Revillet range (per piece) in polypropylen, polyester, stainless steel and glass fiber with knitted cuff. This glove has excellent cut resistance, tested according to TDM standard. Prewashed, to make sure it will keep its form after nex washing cycles. Washable and waterrepelant. Sizes: 6-11. Size 5,12 and 13 on demand.
Strong, ambidextrous blue knitted (13 gauge) gloves made of Intercept Technology® that delivers the highest cut protection level F throughout entire glove and cuff, even after laundering. More durable and stain masking designed for extende use life. Suitable for food processing and services.
Class 2 welding protection, elasticated cuffs for a secure fit, designed to be worn in a harsh working environment, designed with a comfortable fit, CE certified, this product is sold in pairs, UKCA marked. Outer fabric: split cowhide, thickness 1.3 mm Sizes: one size Standards: EN ISO 11611 Class 2 A1
Good level of abrasion resistance <(>&<)> grip, but also high sensitivity in dry to slightly oily conditions.
Welding glove made of high-quality split cowhide leather with cotton lining and heat-resistant Kevlar seams.
Very durable gloves for all extended tasks in cold conditions. Double nitrile coating on insulating lining.
Premium grain goatskin leather combined with cut and impact protection glove. TPR impact protection on top of the hand and the full lenght of the fingers. Additional palm leather layer enhances cut resistance. Reinforced seams on the index finger and base of thumb. Secure cuff closure with TPR tab closure. Sizes: 8-13.
Guide 6402 CPN offers a unique combination of maximum protection against needlesticks and cuts while maintaining flexibility and comfort. This model is the latest innnovation with needle and cut protection in the palm area. Kevlar in dark gray for heat resistance and cut protection is used on the back of the hand. Suitable for police and security forces when there are risks of cut, puncture and needle injuries. Great grip and tactile feeling. Sizes: 7-12.
This glove combines tough protection with natural comfort. The Intercept™ Cut Resistance Technology provides extreme cut protection, the liner made with water-based polyurethane/nitrile provides enhanced comfort and dexterity, it is solvent free and OekoTex 100 certified. The Fortix technology provides extended use with up to 4x the durability in the thumb crotch region versus the standard glove without thumb crotch reinforcements. Latex and silicone free. Sizes: 6-11.
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
Cut resistant lined welding glove made of durable soft goat leather with Kevlar seams.
A supple glove with cut, puncture and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and the fingertips from needles and sharp objects. Knitted of HDPE cut-resistant fibre, which gives the whole glove cut protection level 5 according to EN 388. Liquid-proof all the way down over the knuckles, making them suitable for e.g. cleaning and wet/oily work. Extremely durable dipping. In conformity with: EN388:2016 4.X.4.3.F
Superb protection against cuts and abrasion, successor of Hyflex 11-630
Knitted seamlessly with unique Kyorene® graphene fiber that regulates heat and kills harmful bacteria, as well as neutralizing odors.
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 305 mm.
Synthetic glove, Nitrile foam/waterbased PU, Palm-dipped, Acrylic, Nylon, 10 gg, 15 gg, Spandex, Foam grip pattern, Fleece, Cat. II, Black, yellow, Withstands contact heat up to 100°C, for allround work . In line with : EN 388:2016, 4221A EN 407:2004, X1XXXX EN 511:2006, X2X
Welding glove in top quality A-grade nappa leather with ergonomic protective cuff in red split leather. Extra comfortable because of a very high dexterity, an elastic on the back, a wingthumb model and strong kevlar seams. Suitable for industrial welding jobs (TIG) where high precision is required. Available sizes: 9, 10 and 11.
Arc flash protection for the toughest conditions, will not drip, melt or ignite. Made from durable and comfortable materials. Seamless knitted liner of glass fibre, para-aramid, meta-aramid, nylon and spandex with a smooth finish mixed coating of nitrile, chloroprene. With plastisol prints on the back of the hand for extra protection. Sizes: 6-12. ASTM F2625 CAL10,3 ATPV2
Glove with double nitrile coating on a very flexible, thin 18 gauge seamless nylon/spandex liner. The fully coated glove prevents penetration of oils (due to the red smooth nitrile coating) and this without loss of grip (due to the black nitrile foam coating). Highest protection against abrasion in combination with short-term protection against contact heat (100°C). In accordance with: EN388:2016: 4.1.2.1.A, EN407:2021: X.1.X.X.X.X.
Cut-resistant glove made of special graphene fibers with black HCT® nitrile microfoam coating on the palm. These fibers provide heat regulation and keep hands comfortable. Bacteriostatic kills harmful bacteria. Odor neutralization so that the gloves stay fresh to smell. Without glass and steel fibers. 13 gauge.
Gloves with an innovative yarn structure, in nylon, with an optimalDyneema® content on the back and a polyurethane coating on the pa lm.Very high dexterity due to 18 gauge technique.The Hyflex providesexceptional comfort due to a lycra lining and the tricot cuff as well as a long service life due to the high abrasion resistance. Available in: grey. Sizes: 6 / 7 / 8 / 9 / 10 / 11, total length: 210-265 mm.
Flexible adapting cut protection glove without coating, developed in collaboration with food companies. Ideal to put on under a disposable glove or chemically resistant glove. Oekotex and touch screen
Cut resistant 5-finger glove with palm and back in water repellent cowsplit leather. Inner lining reinforce with knitted TEKINOX®. 15cm cotton protective cuff with extra wrist protection and seams in para-aramid. Total lenght: 35 cm. Sizes: 7-11. Suitable for : metal and glass industry, heavy industrial activities. In line with. EN388:2016: 4.X.4.4.F
Seamless liner of cotton/polyester, roughened green latex coating on palm and fingertips.
