BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Set of 10 clip to clip coil tether non conductive. To attach tools safely and to prevent they drop from height. Extended lenght: 70cm
Set of 10 V-ring attachment points for tools with max. weight: 15;9kg
Set of 10 V-ring attachment point with 2 satbilisation wings for tools with max load 36,3kg
Atex Half face mask designed to work to complete the Claenspace EX PAPR systems. Clips quickly onto the power units and are easily unclipped for cleaning. Made of soft silicone that readily moulds to the face and doesn't cause allergic dermatitis.
Removable foam insert for Secure Fit 600. Packed by 5 pieces. No PPE.
The 3M™ Peltor™ LiteCom Pro III ATEX neckband is a high-performance hearing protector with a built-in communication radio for cable free short-range communication with other LiteCom headsets and portable two-way radios programmed on the same frequency. Bluetooth® Multipoint connectivity for connecting mobile devices The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy environments. SNR: 32dB. Possibility of programming your own frequencies (not included in the price). In accordance with: EN 352-6
Fall arrester for use on LadSaf cables 8mm, with integrated absorber and steel carabiner. Moves with the person over the rail and stops any fall immediately. Must be connected to the chest anchor point of the harness.
Gas filter k1 protects against ammonia, and certain amines, such as ethylen diamine. To use with half and full face Sundstrom masks.
Gas filter k2 protects against ammonia, and certain amines, such as ethylen diamine. To use with half and full face Sundstrom masks.
Removable foam insert for Secure Fit 500. Packed by 5 pieces. No PPE.
Set of 10 quick spins with coil tether to attach tools.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Sold per pack of 10. No PPE.
Safety bucket designed for use at height, with a closure system which can prevent objects from falling. Piercing-resistant plates secured in the base of the bucket. With small pockets for storage of tools.
Spares pack PF-940 for powered air respirators PF-600E and PF-600E-ASB (former Proflow)
Insert for prescription spectacle lenses in the full mask of the Vision series. Glasses set with 52mm wire frame. No PPE
Charging cradel with charger for 5 led lenser lamps. No PPE
Chef's vest with a Texpel dirt-resistant finish: MeshAir™ breathable mesh fabric; French cuffs; Concealed snap button closure at the front; sleeve pocket; apron band; Slim-fit design; No shrinkage after washing; Quality: Kingsmill with Texpel Finish: 65% Polyester, 35% Cotton 190g. Available sizes: S-3XL. Available colors: White, gray and black.
Specially developed for operating firearms, ultra-thin and slim wit, feels like a second skin. The synthetic suede in the palm protects the user against contact heat of 100°C for 10 seconds.
Set of 25 heat shrink tubing to protect quick wrap tape from abrasives and harsh working environments. Heat shrink tubing shrinks 200% when heated. No PPE.
Set of 10 heat shrink tubing to protect quick wrap tape from abrasives and harsh working environments. Heat shrink tubing shrinks 200% when heated. No PPE.
Rescue and descent device with rotating wheel and 9.6 mm semi-static kernmantle rope for rescue or evacuation of you, a second person or any victim from height. The hand-wheel serves to lower or retrieve victims, can be used with an electric screwdriver. Maximum weight for 2 persons: 225kg. Suitable for rescue operations in hard to access locations and heights.
Constructed with a rough-finish triple-dipped PVC coating, this chemical protection glove prioritizes wearer safety and comfort. A seamless, soft cotton liner wicks away moisture to prevents odours, and the ergonomic design reduces hand fatigue. The rough grip offers high-performance precision in greasy or damp environments. Sizes: 9(L)-11(XXL). In line with EN388:2016 4.1.2.1.X, EN ISO 374-1:2016 Type B: JKL
The M211 label printer can print labels from your smartphone with the Express Labels app. Includes an automatic cutter and is supplied with an M21-750-499 label cartridge, AC power cord with plugs for EU, UK and US and a quick start guide. No PPE
Kit of tactical rechargeable earplugs. They help protect your hearing, and can help improve situational awareness and communications in challenging environments. Intuitive one-button operation. Integrated with state-of-the-art level-dependent technology, the TEP-300 helps provide hearing protection in noise and situational awareness in quiet environments.
Cable between Comtac VII and SCU. No PPE.
Flame retardant jacket E2274-106: Spread collar Closure by 5 covered snap buttons 1 patch breast pocket One inside pocket on the right 2 lower patch pockets with flaps Turned-back cuffs Wider flaps. Composition: 52% cotton, 38% type-F acrylic, 10% satin flame-retardant viscose - 340 gr/m². Available sizes: 0-6 FR. Available colours: Navy. Complies with: EN ISO 11612 A1/B1/C1/D2/E2/F1 and EN ISO 11611 class 1.
Replacement plugs for 3M™ PELTOR™ TEP, LEP en EEP. Attenuation: 23dB. Not separately tested as PPE.
The 3M™ PELTOR™ ComTac™ VI NIB Headset offers a hands-free adaptive VOX capability allowing face to face communication in full duplex for up to four talkers and up to sixty listeners within a 10 meter radius. This significantly increases the ability to communicate when on a boat, in tactical vehicles, aircraft, even in a loud small arms conflict without the need for tactical radio or intercom.
Ladies' winter parka multinorm 5206 82: Hidden zip and stud fastener in front. Two loops for communication equipment. Vertical chest pocket with zip on right chest. Keyring holder. Side pockets with fleece lining and pocket flaps. Extended back with two side slits for enhanced movement. Adjustable cuffs. Wind stoppers in sleeves. Inside pocket for Ipad/documents. Fleece on the inside of the collar. Zip access for back heat seal badges. Available colors: Fluo orange / navy. Available sizes: S-2XL.
Semi-fixed height, single user mast. Semi-rigid masts have a limited (1.5 m) adaptability to optimize the anchor height during installation. Height: 4,6 m - 6,1 m. Offset/range: 3,7 m. PRICE WITHOUT TRANSPORTATION COST!
Semi-fixed height, single user mast. Semi-rigid masts have a limited (1.5 m) adaptability to optimize the anchor height during installation. Height: 5,3 m - 7,6 m. Offset/range: 3,7 m. PRICE WITHOUT TRANSPORTATION COST!
Hygiene set for hearing protector VERISHIELD VS100D/VS100DH/VS100DF
Arm protection for riot police forces. Sizes: 0 (XXS-S) / 1 (M-L) / 2 (XL-XXXL)
Short hose for motor unit PX5, in combination with the decontaminable harness (1053172).
Fireproof battery bag to safely transport, store and charge the battery of an electric bicycle. If the battery should ignite, the damage will be limited to the bag and the battery. Tested with Li-Ion batteries up to 400W). Dimensions: 440x130x120 mm
Chemical resistant Neoprene air cap with integrated safety helmet, including belt with control valve for connection to compressed air network.
Welding Filter Battery Holder Spare Part for 3M™ Speedglas™ Heavy Duty Welding Helmet G5-01/G5-02.. Not separately approved as PPE.
Complete kit contains, SR 500 fan unit, SR602 hood, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Safety helmet made out of PE with standard peak. Has a 6-point textile cradle (53-64cm) with slip ratchet. Has a Chamlon sweatband.
6-point suspension in textile with slip ratchet and sweatband for helmets EVO-range. No PPE.
Face shield in black woven nylon mesh with matt surface. Very light and non-conductive material. Compatible with EVO helmets. Light reduction: 65%.
Face shield in black etched stainless steel with matt surface. Very light and non-conductive material. Compatible with EVO helmets. Light reduction: 80%.
The Browguard with rotary knob allows you to mount a wide range of face shields. For example, we can mount the face shields M1 (nylon wire mesh) / M2 (woven stainless steel) / M3 (etched stainless steel).
4-point suspension in textile with ratchet for X5500 helmet.
6-point suspension in textile with ratchet for X5000 helmet.
Polycarbonate replacement visor, for the EVO VistaShield helmet.
Complete anti-static air hose with couplings for use with SR500, SR500 EX and SR700 motor units, and full mask SR200.
Fall arrest block Rebel 20 metres stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. Weight: 10kg.
Stand-alone air purifier that recirculates and cleans the air in the room, specially designed for large spaces. Version with 4 wheels, capacity of 2500m³/hour. Air outlet on 4 sides.
Powerful and unique air purifier that easily and effectively removes extreme dust concentrations from up to 5000m³ of air per hour. Ideal for applications in steel processing, paper processing, factory halls, welding workshops, ... Removes both fine dust and coarse dust and ultra-fine dust from the air, resulting in a healthy and comfortable working environment and lower cleaning costs.
Air purifier that recirculates and cleans the air in a room up to 650m³. Removes unwanted odors and gases as well as unwanted particles. Has 4 wheels, making it easy to move. Extremely effective for removing all microspherical particles between 0.3 and 10 microns. The modular design allows you to adapt the capacity to your needs.
The 3M™ Headgear G500 provides a versatile and comfortable solution for wearers who require both face and hearing protection. With special design features making it easy to combine the headgear with other 3M safety product such as face shields, passive earmuffs or communication headsets and integrated eyewear.
