BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
The JALROSEAU from Jallatte is a low safety shoe with Recycled Putek® PLUS upper, J-ENERGY Biomass Balance sole with Infinergy® from BASF, ESD/Dissipative and aluminium safety toe cap type B and non-metallic anti-perforation protection Sizes: 35-48 Compliant with: EN ISO 20345:2022
Long-sleeve T-shirt from the Progression collection, enhanced visibility EN17353.
Honeywell BW™ Flex features a large, high-resolution screen on which measurements can be displayed in many different languages. Essential safety information is displayed clearly and effectively, enabling faster decisions to protect lives in hazardous conditions. The BW™ Flex uses i-series intelligent sensors. These sensors monitor sensor status in real time and enable advanced preventive calibration. These sensors also provide maintenance and end-of-life information. These advanced alerts reduce the likelihood of failure and provide you with more information on threats. Battery life of 2 months on a 4.5h charge, compatible with Intellidox. Version with Catalytic filtered LEL and O2 H2S/CO and CO2 sensor.
Honeywell BW™ Flex features a large, high-resolution screen on which measurements can be displayed in many different languages. Essential safety information is displayed clearly and effectively, enabling faster decisions to protect lives in hazardous conditions. The BW™ Flex uses i-series intelligent sensors. These sensors monitor sensor status in real time and enable advanced preventive calibration. These sensors also provide maintenance and end-of-life information. These advanced alerts reduce the likelihood of failure and provide you with more information on threats. Battery life of 2 months on a 4.5h charge, compatible with Intellidox. Version with Catalytic unfiltered LEL and O2 H2S/CO and CO2 sensor.
The JALMAJESTY from Jallatte J-ROYAL range is a high safety shoe with a water-repellent full-grain leather upper, J-ENERGY Biomass Balance sole with Infinergy® from BASF, ESD/dissipative, and an aluminum safety toe cap type B and non-metallic anti-perforation protection S. Sizes: 35-48 Compliant with: EN ISO 20345:2022
Multi-charger to fit all SST4 detectors. Standard for 5 detectors, expandable to charging station for 20 detectors, a coupling cable (1062815) is required per additional rack (1062814).
Additional module to extend the multi-charger for SST (1062812) with additional 5 charging slots. One coupling cable (1062815) is required per additional module. (not included).
Coupling cable to extend the mulitcharger (1062812) with an additional module (1062814). A coupling cable is required for each additional module. Up to 4 modules for a total of 20 devices can be placed on top of each other.
External pump for portable gas detectors without built-in pump. To be connected to a hose of max. 15m. Designed for evacuation, measurement, for example in tanks and shafts.
Aluminium bottle of 58L with test gas H2S 10PPM for calibration of Watchgas detectors. To be used for manual calibration or to be combined with the Watchgas docking station SST1/SST4 (1062077). Always to be used with regulator 1062078.
Reducer for mounting on gas cylinder for manual testing or calibration of diffuse Watchgas gas detectors. Not suitable for use with ractive test gases such as chlorine, ozone, ..
Piqué polo shirt with long sleeves from the Progression collection, enhanced visibility EN17353.
Long-sleeved polo sweatshirt from the Progression collection, enhanced visibility EN17353.
Crew neck sweatshirt for men from the Progression collection, enhanced visibility EN17353.
Half-zip sweatshirt from the Progression collection, enhanced visibility EN17353.
Half-zip hoodie from the Progression collection, enhanced visibility EN17353.
Men's fleece with full zip from the Progression collection, enhanced visibility EN17353.
Women's fleece with full zip from the Progression collection, enhanced visibility EN17353.
Softshell from the Progression collection, enhanced visibility EN17353.
Light work jacket from the Progression collection, enhanced visibility EN17353.
Lined softshell for men from the Progression collection, enhanced visibility EN17353.
Shell jacket for men from the Progression collection, enhanced visibility EN17353.
Lined rain jacket for men from the Progression collection, enhanced visibility EN17353.
Work jacket for men from the Progression collection, enhanced visibility EN17353.
Women's softshell from the Progression collection, enhanced visibility EN17353.
Women's lined softshell from the Progression collection, enhanced visibility EN17353.
Women's shelljacket from the Progression collection, enhanced visibility EN17353.
Lined functional jacket for women from the Progression collection, enhanced visibility EN17353.
Women's light work jacket from the Progression collection, enhanced visibility EN17353.
Stretch trousers for men with knee pockets from the Progression collection, enhanced visibility EN17353.
Stretch trousers with knee pockets and tool pockets from the Progression collection, enhanced visibility EN17353.
Stretch shorts for men from the Progression collection, enhanced visibility EN17353.
Stretch trousers for women without knee pockets from the Progression collection, enhanced visibility EN17353.
Stretch trousers for women with knee pockets and tool pockets from the Progression collection, enhanced visibility EN17353.
Stretch shorts for women from the Progression collection, enhanced visibility EN17353.
Stretch bib trousers with knee pockets from the Progression collection, enhanced visibility EN17353.
Bodywarmer for men from the Progression collection.
Bodywarmer for women from the Progression collection.
Option for LOXK2000 VDMA Certified cabinet (1063001) .Aerosol fire suppression system. Upon smoke detection, the aerosol will be imm ediately activated and spread throughout the entire space of the cabinet. The aerosol cools and controls the battery.
This glove offers excellent grip in dry, damp and slightly oily environments. The single nitrile foam coating in the palm makes the glove comfortable, yet grippy. Lining with 18 gg knitting technology and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 3.1.1.X - EN 407:2020: X.1.X.X.X.X
This glove offers excellent grip in dry, wet and slightly oily environments. Coated knuckles and triple nitrile foam palm coating for a solid oil barrier. Lining with 18 gg knitting technology and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 4.1.1.1.X - EN 407:2020: X.1.X.X.X.X
Glove with excellent grip in oily environments. Waterproof and with chemical approval type C. Fully and triple coated with nitrile foam, and with a long cuff. Lining with 18 gg knitting technique and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 4.1.1.1.X - EN 407:2020: X.1.X.X.X.X, EN374: TYPE C
Spare blades for safety cutter
3M™ PELTOR™ WS™ ALERT™ XP+ FM radio headset, WS7, app support, FM radio with RDS, MultiPoint Bluetooth, turquoise
3M™ PELTOR™ WS™ ALERT™ XPI+ FM radio headset, WS7, app support, FM radio with RDS, MultiPoint Bluetooth, WAP, purple.
JALAMBER is a low safety shoe in the J-QUARTZ range from JALLATTE, with a shaft made of water-repellent grain leather, antistatic. a sole polyurethane J-Quartz equipped with the JAL'GRIP system (LG) and a safety nose made of composite Xetane B and perforation-resistant sole. EN ISO 20345:2022 From 35 to 48
Aluminum tripod with two anchor points and one pulley in the head, adjustable height from 1.15m to a maximum of 2.15m. Weight: 13kg. Max. capacity: 500kg. Equipped with a built-in winch mount and supplied in a convenient carrying bag.
Wrist strap with a 120mm line to attach tools weighing up to 2kg to prevent them from falling when working at height.
Double lanyard for attaching to the tool loop of a harness on one side and two tools, each weighing up to 5 kg, on the other. Maximum length: 130 cm.
Stretch lanyard for attaching to the tool loop of a harness on one side and a tool weighing up to 5 kg on the other. Max. length: 130 cm
DuPont™ Tyvek® 500 HV TY127S XG. Hooded coverall. Ergonomic-protective design. Respirator fit hood. Elasticated wrists and ankles and waist. Zipper made with Tyvek® material, Tyvek® flap. Fluorescent orange with grey retroreflective bands. Retroreflective bands create a symmetric "X" on the back of the coverall distinguishing rearward and forward orientation of the wearer. Stitched external seams.
Hands-free system, instant and continuous communication Bluetooth compatible- connect to wireless headsets and Bluetooth enabled phones Multi channel use and group settings within channels Unlimited users Easy set up and configuration Up to 11 hour battery use Quick charge in under 4 hours High-definition audio quality Patented noise filter 900 MHz License-Free Frequency 3 Channels of communication royaltie-free frequencies in accordance with European radio regulations (ETSI) weight: 190g dimensions: 70x110x28mm
The configurator-charger recharges Guardian (plus) terminals and batteries. Can charge and configure 4 terminals/batteries at the same time Intuitive touch screen. Includes a power connector that can be used in conjunction with charger. Extensions to connect a larger number of terminals/batteries.
Very high quality microphone. In combination with earplugs, it provides good communication in noisy environments. Weight: 12 g. With foam, wind protection. Compatible with right and left.
Noise-cancelling HEADSET EPI audio with microphone and neckband
VOK-GUARD-EU-KIT-4-BT-NH This kit contains 4 mobile radio terminals Guardian, 1 battery charger (with configurator), 1 small hard case (HAC 404), 1 user guide, power supply and cable
EX battery charger for the atex battery SR502 (1061168) to be used with motor unit SR 500 EX.
Industrial Air hood with safety helmet SR 575 to be combined with motor unit SR 500/ SR 500 EX or SR 700, and with SR 507 for use with compressed air.Transparent visor in PC. Air channel leads to the visor to avoid fogging of the visor. Lightweight construction with low centre of gravity ensures a balanced and ergonomic fit. Adjustable head harness ensures secure and personalised fit.A wide range of accessories makes the helmet suitable for different applications.
Complete kit with SR 500 fan unit and protective helmet SR 575 with polycarbonate visor. Contains, SR 500 fan unit, SR 580 helmet, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: 500.
Economical basic harness with 2 anchor points and classic buckle closures (buckle-by-buckle). Universal size. Adjustable shoulder and leg straps. Maximum user weight: 140 kg.
Specially designed for working in environments with potential electrical hazards. Adjustable shoulder and leg straps, and an adjustable hip belt. The polymer-coated metal buckles and D-rings provide electrical insulation up to 12 kV. Universal size. Suitable for a maximum user weight of 140 kg. Best used with electrically insulating lanyards (1064014/1064015).
Mobile and universal anchor point, for use by 1 person.
With a D-ring at each end. Suitable for use in ATEX Zone 1 and for one user only.
Temporary webbing lifeline with adjustable length from 5 to 20 meters, suitable for two people. It can be attached directly to a structure or to an anchor point using the supplied snap hooks (2). Supplied in a convenient carrying bag.
Temporary horizontal lifeline with a maximum length of 18m, easy to install. Durable plastic housing with a carrying handle and tension indicator. Built-in shock absorption mechanism to limit impact forces during a fall. Suitable for two people and can be used in Atex Zone 1 environments.
Temporary, portable, and freestanding anchoring system for use on TPO roofing or concrete surfaces. The anchor point is equipped with an energy absorption system. The bottom plates have a rubber anti-slip backing. Consists of 4 cast plates and 12 top plates, each weighing 25 kg (55 lbs), (total weight: 416.5 kg). May only be used with all associated components. Suitable for 1 person.
